Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Effect of thermal conduction and radiation on the dynamics of a flaring coronal loop

A systematic study of the effects of thermal conduction and radiation (Cox-Tucker type) on the dynamic response of a coronal loop is presented. The study is based on a one-fluid hydrodynamic description of a magnetic flux loop subject to a sudden localized heating, simulating the flare energy release. Numerical results are obtained for the heating of a full loop at one end and symmetrical heating at both ends. The results show that: (1) the basic response is the propagation of a hydrodynamic shock; (2) thermal conduction (Coulomb type) has significant effects; and radiation has only minor influence unless the density exceeds 10 to the 11th per cu cm. It is noted that the uniform flaring of a loop is associated with heating of long duration. Short pulse-like heating results in the nonuniform brightening and propagation of luminous fronts similar to that sometimes observed in flare loops.

Wu, S. T.↗
DOE OSTI2022

Arctic Ocean annual high in ${{\boldsymbol{p}}}_{{{\bf{CO}}}_{{\bf{2}}}}$ could shift from winter to summer

Long-term stress on marine organisms from ocean acidification will differ between seasons. As atmospheric carbon dioxide (CO 2 ) increases, so do seasonal variations of ocean CO 2 partial pressure (p co 2 ), causing summer and winter long-term trends to diverge. Trends may be further influenced by an unexplored factor—changes in the seasonal timing of p co 2 . In Arctic Ocean surface waters, the observed timing is typified by a winter high and summer low because biological effects dominate thermal effects. Here we show that 27 Earth system models simulate similar timing under historical forcing but generally project that the summer low, relative to the annual mean, eventually becomes a high across much of the Arctic Ocean under mid-to-high-level CO 2 emissions scenarios. Often the greater increase in summer p co 2 , although gradual, abruptly inverses the chronological order of the annual high and low, a phenomenon not previously seen in climate-related variables. The main cause is the large summer sea surface warming from earlier retreat of seasonal sea ice. Warming and changes in other drivers enhance this century’s increase in extreme summer p co 2 by 29 ± 9 per cent compared with no change in driver seasonalities. Thus the timing change worsens summer ocean acidification, which in turn may lower the tolerance of endemic marine organisms to increasing summer temperatures.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

First principles calculations in support of Pu aging: calculating the effects of lattice imperfections on thermodynamics

Plutonium (Pu) has, in theory, well defined crystal structures: its atoms are arranged in regular spatial patterns. But Pu is radioactive, and as its nuclei decay those regular spatial patterns are interrupted. The interruptions are lattice imperfections, which are known to affect how materials respond to their environment. To adequately model Pu, we need to know which lattice imperfections are present, how they interact with each other, and how they affect the material’s response to its environment. The work presented here aims to use density functional theory (DFT) calculations to begin to answer the latter, in particular, how individual lattice imperfections affect measurable effects including thermal expansion (the change in volume in response to a change in temperature), heat capacity (the amount of thermal energy needed to change a material’s temperature), and elastic moduli (a material’s resistance to applied stresses). Pu poses many computational challenges. The $\textit{f}$ electrons require special attention. Of all the elements, Pu has the largest number of electrons that must be included in the calculations. Thermal effects require calculating the phonons (the lattice vibrations), which for systems containing lattice imperfections demand large, complex computational cells - but computational resources limit the size and complexity. With careful restructuring of how the calculations are performed, all these challenges have been met to enable calculations that provide insight into how lattice imperfections affect Pu’s response to its environment. Reported here are the computational challenges and the advances developed to meet them, along with the first results showing the strong effect that one prototype lattice imperfection (an interstitial Pu atom in a delta-phase Pu lattice) has on Pu’s response to its environment.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Sodium Chemistry Assessment and Initiation of Sodium Exposure Experiment on A709 Commercial Heats and LPBF 316H SS

This report documents sodium chemistry characterization and the initiation of forced‑convection sodium exposure experiments for two structural materials for sodium‑cooled fast reactors (SFRs): Alloy 709 (solution‑annealed and with an additional 775 °C/10 h precipitation treatment) and laser powder bed fusion (LPBF) 316H stainless steel tensile specimens printed with an as‑built surface condition. The sodium exposure experiment was conducted in a forced‑convection sodium loop with two vessels operated at 550 °C and 600 °C, and a cold trap maintained at <130 °C. Carbon activity in sodium was quantified using a nickel‑foil equilibration method. Initial post‑exposure evaluation after ~1,000 h indicates negligible thickness change for Alloy 709 and a small but measurable mass decrease. To isolate thermal effects from sodium effects, parallel thermal‑aging experiments were performed on Alloy 709 at 550 °C and 600 °C. Baseline tensile tests at room temperature, 550 °C, and 600 °C show expected reduction in strength with increasing temperature and serration tensile curves at elevated temperatures, consistent with dynamic strain aging. After 3,000 h thermal aging, Alloy 709 exhibits modest strengthening and reduced ductility at 550 °C. Together, these results establish the loop chemistry conditions and provide the initial corrosion and mechanical property results for ongoing long‑duration sodium exposure of Alloy 709 and LPBF 316H stainless steel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1979

Applications of the IITRI compression test fixture at elevated temperature

The purpose of the present paper is to describe an application of the IITRI compression test fixture at elevated temperature (589K) was described as well as the present compressive moduli and ultimate strains of HTS/PMR-15 graphite/polyimide material. Considerable care was taken in specimen fabrication to minimize back-to-back strain variations due to specimen bending. The effects of specimen width and temperature were studied for various laminate orientations. The IITRI specimen was analyzed using three dimensional finite elements to determine the magnitude and location of stress concentrations to assess their potential effects on measured moduli and ultimate strains. Stress concentrations are of concern since end constraints, free-edge effects, and thermal effects add to the three dimensional nature of stresses in a specimen.

Camarda, C. J.↗
NASA NTRS1984

Metal vapor vacuum arc switching - Applications and results

The design of metal-vapor vacuum-arc switches (MVSs) for electromagnetic launchers is discussed, and preliminary results are presented for an experimental MVS. The general principles of triggered-vacuum-gap and vacuum-interrupter MVSs are reviewed, and the requirements of electromagnetic launchers are analyzed. High-current design problems such as electrode erosion, current sharing, magnetic effects, and thermal effects are examined. The experimental MVS employs stainless-steel flanges, a glass vacuum vessel, an adjustable electrode gap, autonomous internal magnetic-field coils, and a tungsten-pin trigger assembly. Some results from tests without magnetic augmentation are presented graphically.

Cope, D.↗
NASA NTRS1990

Bounds on the thermoelastic properties of suspensions of spheres

Results are presented on computations of three-point upper and lower bounds on the effective thermal expansion coefficient, the effective constant-pressure specific heat, and the effective constant-volume specific heat of statistically isotropic suspensions of mutually impenetrable spheres. The effect of polydispersivity in sphere size on the thermoelastic properties is investigated by considering the cases of both equisized and multisized spheres. For reasons of mathematical analogy, the results obtained for the effective thermal expansion coefficient translate immediately into equivalent results for the hygroscopic expansion coefficient.

Torquato, S.↗
NASA NTRS1991

NASP aeroservothermoelasticity studies

Some illustrative results obtained from work accomplished under the aerothermoelasticity work breakdown structure (WBS) element of the National Aerospace Plane (NASP) Technology Maturation Program (TMP) are presented and discussed. The objectives of the aerothermoelasticity element were to develop analytical methods applicable to aerospace plane type configurations, to conduct analytical studies to identify potential problems, to evaluate potential solutions to problems, and to provide an experimental data base to verify codes and analytical trends. Work accomplished in the three areas of experimental data base, unsteady aerodynamics, and integrated analysis methodology are described. Some of the specific topics discussed are: (1) transonic wind tunnel aeroelastic model tests of cantilever delta wing models, of an all-moveable delta-wing model, and of aileron buzz models; (2) unsteady aerodynamic theory correlation with experiment and theory improvements; and (3) integrated analysis methodology results for thermal effects on vibration, for thermal effects on flutter, and for improving aeroelastic performance by using active controls.

Doggett, Robert V., Jr.↗
NASA NTRS2000

Computational Fluid Dynamics Modeling of Nickel Hydrogen Batteries

An electrochemical Ni-H2 battery model has been expanded to include thermal effects. A thermal energy conservation equation was derived from first principles. An electrochemical and thermal coupled model was created by the addition of this equation to an existing multiphase, electrochemical model. Charging at various rates was investigated and the results validated against experimental data. Reaction currents, pressure changes, temperature profiles, and concentration variations within the cell are predicted numerically and compared with available data and theory.

Cullion, R.↗
NASA NTRS1987

Fluoride glass starting materials - Characterization and effects of thermal treatment

The production of heavy metal fluoride (HMF) glasses, and the effects of thermal treatments on the HMF glasses are investigated. ZrF4, BaF2, AlF3, LaF3, and NaF were utilized in the synthesis of zirconium-barium-lanthanum-aluminum-sodium fluoride glass. The purity of these starting materials, in particular ZrF4, is evaluated using XRD analysis. The data reveal that low temperature heating of ZrF4-H2O is effective in removing the water of hydration, but causes the production of ZrF4 and oxyfluorides; however, dehydration followed by sublimation results in the production of monoclinic ZrFe without water or oxyfluoride contaminants.

Chen, William↗
NASA NTRS2006

Electron Velocity Distribution Function in Magnetic Clouds in the Solar Wind

We present a study of the kinetic properties of the electron velocity distribution functions within magnetic clouds, since they are the dominant thermal component. The study is based on high time resolution data from the GSFC WIND/SWE electron spectrometer and the Berkeley 3DP electron plasma instruments. Recent studies on magnetic clouds have shown observational evidence of anti-correlation between the total electron density and electron temperature, which suggest a polytrope law P(sub e) = alpha(Nu(sub e) (sup gamma)) for electrons with the constant gamma approximates 0.5 < 1. This anti-correlation and small polytropic gamma-values is interpreted in the context of the presence of highly non-Maxwellian electron distributions (i.e. non-thermal) within magnetic clouds. These works suggested that the non-thermal electrons can contribute as much as 50% of the total electron pressure within magnetic clouds. We have revisited some of the magnetic cloud events previously studied and attempted to quantify the nature of the non-thermal electrons by modeling the electron velocity distribution function using a kappa distribution function to characterize the kinetic non-thermal effects. If non-thermal tail effects are the source for the anti-correlation between the moment electron temperature and density and if the kappa distribution is a reasonable representative model of non-thermal effects, then the electron velocity distribution within magnetic clouds should show indication for small K-values when gamma < 1.

Nieves-Chinchil, Teresa↗
NASA NTRS1980

Effects of thermally induced porosity on an as-HIP powder metallurgy superalloy

The effect of thermally induced porosity on the mechanical properties of an as-hot-isostatically pressed and heat-treated pressing made from low carbon Astroloy is examined. Tensile, stress-rupture, creep, and low cycle fatigue tests were performed and the results were compared with industrial acceptance criteria. It is shown that the porous pressing has a porosity gradient from the rim to the bore with the bore having 1-1/2% greater porosity. Mechanical properties of the test ring below acceptance level are tensile reduction in area at room temperature and 538 C and time for 0.1% creep at 704 C. It is also found that the strength, ductility, and rupture life of the rim are slightly inferior to those of the rim of the sound pressings, while those of the bore are generally below the acceptable level. At strain ranges typical of commercial aircraft engines, the low cycle fatigue life of the rim of the porous pressings is slightly lower than that of the sound pressings.

Dreshfield, R. L.↗
NASA NTRS1991

Effect of thermal convection on the shape of a solid-liquid interface

The effect of thermal convection on the shape of solid-liquid interface was investigated in experiments conducted in a transparent Bridgman-type directional solidification furnace. The relationship was numerically modeled using a standard 2D finite-difference approach, with the solid-liquid deformable interface approximated by a blocking-off technique. The directional solidification furnace was used with pure succinonitrile (which is also transparent) contained in a long square ampoule made of borosilicate glass. With the furnace in the vertical configuration, a flat interface was observed, in agreement with the model. On the other hand, a highly distorted interface was obtained in the horizontal configuration; the numerical results showed a strong recirculating cell in front of the interface due to natural thermal convection. The results indicate that thermal convection is responsible for the interface distortion.

Mennetrier, C.↗
NASA NTRS2002

Effects of Thermal Exposure on Properties of Al-Li Alloys

Aluminum-Lithium (Al-Li) alloys offer significant performance benefits for aerospace structural applications due to their higher specific properties compared with conventional Al alloys. For example, the application of Al-Li alloy 2195 to the space shuffle external cryogenic fuel tank resulted in weight savings of over 7,000 lb, enabling successful deployment of International Space Station components. The composition and heat treatment of 2195 were optimized specifically for strength-toughness considerations for an expendable cryogenic tank. Time-dependent properties related to reliability, such as thermal stability, fatigue, and corrosion, will be of significant interest when materials are evaluated for a reusable cryotank structure. Literature surveys have indicated that there is limited thermal exposure data on Al-Li alloys. The effort reported here was designed to establish the effects of thermal exposure on the mechanical properties and microstructure of Al-Li alloys C458, L277, and 2195 in plate gages. Tensile, fracture toughness, and corrosion resistance were evaluated for both parent metal and friction stir welds (FSW) after exposure to temperatures as high as 300 F for up to 1000 hrs. Microstructural changes were evaluated with thermal exposure in order to correlate with the observed data trends. The ambient temperature parent metal data showed an increase in strength and reduction in elongation after exposure at lower temperatures. Strength reached a peak with intermediate temperature exposure followed by a decrease at highest exposure temperature. Friction stir welds of all alloys showed a drop in elongation with increased length of exposure. Understanding the effect of thermal exposure on the properties and microstructure of Al-Li alloys must be considered in defining service limiting temperatures and exposure times for a reusable cryotank structure.

Shah, Sandeep↗
NASA NTRS1990

Finite element analysis of thermal distortion effects on optical performance of solar dynamic concentrator for Space Station Freedom

An analysis was performed to predict the thermal distortion of the solar dynamic concentrator for Space Station Freedom in low earth orbit and to evaluate the effects of that thermal distortion on concentrator on-orbit performance. The analysis required substructural finite element modeling of critical concentrator structural subsystems, structural finite element modeling of the concentrator, mapping of thermal loading onto the structural finite element model, and the creation of specialized postprocessors to assist in interpreting results. Concentrator temperature distributions and thermally induced displacements and slope errors and the resulting receiver flux distribution profiles are discussed. Results determined for a typical orbit indicate that concentrator facet rotations are less than 0.2 mrad and that the change in facet radius due to thermal flattening is less than 5 percent. The predicted power loss due to thermal distortion effects is less than 0.3 percent. As a consequence the thermal distortions of the solar dynamic concentrator in low earth orbit will have a negligible effect on the flux distribution profiles within the receiver.

Doherty, Michael P.↗