Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “survivable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Survival of soil bacteria during prolonged desiccation.

A determination was made of the kinds and numbers of bacteria surviving when two soils were maintained in the laboratory under dry conditions for more than half a year. Certain non-spore-forming bacteria were found to survive in the dry condition for long periods. A higher percentage of drought-tolerant than drought-sensitive bacteria was able to grow at low water activities. When they were grown in media with high salt concentrations, bacteria generally became more tolerant of prolonged drought and they persisted longer. The percent of cells in a bacterial population that remained viable when exposed to drought stress varied with the stage of growth.

Chen, M.↗
NASA NTRS1974

Survival of infectious microorganisms in space cabin environments

Aerosol survival and virulence of S. aureus and P. aeruginosa cultures isolated during exposure to simulated space cabin environment was studied using the microthread captured aerosol technique. The aerosol survival of P. aeruginosa isolates did not differ significantly from that of the original culture from which the isolates were obtained. The mean death rate of the isolates was 1.03%/min and that of the controls 1.10%/min. Similarly exposure to the 5 psi environment did not affect the virulence of P. aeruginosa. Both strains of S. aureus (IITRI and NASA) after exposure to 5 psi environment showed some degree of adaptation to this environmental stress. The aerosol death rates of the isolated organisms were 5 to 10-fold lower than of the original cultures. At the same time the virulence of the isolates was approximately 5-fold higher than that of the original culture.

Vana, S. C.↗
NASA NTRS1976

Analysis of the survivability of the shuttle (ALT) fault-tolerant avionics system

An extension of the Complementary-Analytic-Simulative Technique (CAST) is presented which is applicable to the Shuttle Data Processing Subsystem (DPS). A two step process was used. The first step provides models, both analytic and simulative, for analysis of the Approach-Landing Test (ALT) configuration. The ALT modeling and analysis are presented. Since CAST had already been shown to be multicomputer systems, the emphasis was placed on extending the CAST concept so it is applicable to computer systems including the multiplicity of input and output devices found in a real-time control system application. The DPS mission-critical survivability for a six-hour mission was determined to be 0.999863 for the Shuttle ALT baseline configuration. Thus it can be said that for ALT, the survivability is adequate. However, the fact that orbiting missions of up to 30 days are planned illustrates the necessity of extending the ALT work to be applicable to OFT and actual mission scenarios. The above analysis led to the evaluation of three selected options which identified two areas of possible improvement. These improvements would result from use of a recovery technique which combines roll ahead with memory copy, and increased TACAN fault detectability.

Source record↗
NASA NTRS1975

Descent and landing of spacecrews and survival in an unpopulated area

Medical and physiologic experience gained in space flight programs of the U.S. and U.S.S.R. is described in relation to acceleration forces in the final phases of manned space flight. Application of this knowledge to future programs, survival in the postlanding period, and survival provisions currently made for spacecrews are discussed.

Berry, C. A.↗
NASA NTRS1977

The influence of handling qualities on safety and survivability

The relationship of handling qualities to safety and survivability of military aircraft is examined which includes the following: (1) a brief discussion of the philosophy used in the military specifications for treatment of degraded handling qualities, (2) an examination of several example handling qualities problem areas which influence safety and survivability; and (3) a movie illustrating the potential dangers of inadequate handling qualities features.

Anderson, S. B.↗
NASA NTRS1978

Alterations in erythrocyte survival parameters in rats after 19.5 days aboard Cosmos 782

Rats were subjected to 19.5 days of weightless space flight aboard the Soviet biosatellite, Cosmos 782. Based on the output of CO-14, survival parameters of a cohort of erythrocytes labeled 15.5 days preflight were evaluated upon return from orbit. These were compared to vivarium control rats injected at the same time. Statistical evaluation indicates that all survival factors were altered by the space flight. The mean potential lifespan, which was 63.0 days in the control rats, was decreased to 59.0 days in the flight rats, and random hemolysis was increased three-fold in the flight rats. The measured size of the cohort was decreased, lending further support to the idea that hemolysis was accelerated during some portion of the flight. A number of factors that might be contributory to these changes are discussed, including forces associated with launch and reentry, atmospheric and environmental parameters, dietary factors, radiation, and weightlessness.

Leon, H. A.↗
NASA NTRS1982

The path and surviving tail of a comet that fell into the sun

A satisfactory orbital solution for Comet Howard-Koomen-Michels 1979 XI is found on the assumption that the comet's line of apsides coincided with that of the Kreutz sungrazing comet group. The derived perihelion distance then shows that this is the first known case of a comet falling into the sun. A dust tail that survived the comet is studied as a particle flow phenomenon controlled by no force other than solar gravity and solar radiation pressure. The tail's outline is interpreted in terms of an onset of dust production, a peak repulsive force on the particles, and a circumsolar dustfree zone due to particle sublimation. It is shown that the surviving debris consisted mostly of absorbing, submicron size particles in hyperbolic trajectories convex to the sun and curving toward the earth. The tail width may be a product of the interaction of charged dust in the tail with a complicated structure of the coronal magnetic field.

Sekanina, Z.↗
NASA NTRS1983

Robust Reconfiguration for High Reliability and Survivability for Advanced Aircraft

Flight control system (FCS) reliability is discussed in terms of sensors, computers and actuators. The servo/actuation bottleneck is discussed. FCS survivability is considered. Preliminary survivability issues. A Grumman study vehicle, R-14, and YF-16 aircraft configurations are studied. Goals of control are reviewed.

Cunningham, T. B.↗
NASA NTRS1987

Maximum survival capability of an aircraft in a severe windshear

The performance of constant-alpha, maximum-alpha, constant-velocity, constant-absolute-inclination, constant-climb-rate, and constant-pitch (CP) vertical-plane guidance schemes for aircraft taking off under horizontal-windshear conditions with a downdraft is compared by means of numerical simulations; the results are presented in tables and graphs, and it is found that CP guidance gives the best aircraft survivability. Optimal, gamma-guidance, and simplified-gamma trajectories are then evaluated to improve the performance of CP, and the correct selection of the feedback gain coefficient and the time delay for response to windshear onset is shown to be of great importance for maximizing survivability.

Miele, A.↗
NASA NTRS1987

Improved oil-off survivability of tapered roller bearings

The aim of this program is to improve the oil-off survivability of a tapered roller bearing when applied to a helicopter transmission, since the tapered bearing has shown a performance advantage in this application. However, the critical roller end-rib conjunction is vulnerable to damage in an oil-off condition. Three powdered metal materials were selected to use as the rib material for oil-off evaluation. These were: M2 steel to a 65% density, CBS 1000M 65% density, and CBS 1000M 75% density. The bearing styles tested were ribbed cone (inner race) and ribbed cup (outer race). Carburized solid CBS 600 was also used as a ribbed material for comparison of oil-off results. The tests were conducted at six speeds from 4000 rpm (0.26 million DN) through 37000 rpm (2.4 million DN).The ribbed cup style bearing achieved longer lives than the ribbed cone style. A standard bearing lasted only 10 minutes at 4000 rpm; however, the 30-min oil-off goal was achieved through 11000 rpm using the survivable ribbed cup bearing. The oil-off lives at 37000 rpm were less than 10 seconds. The grinding of the powder metal materials and surface preparation to achieve an open porosity is extremely critical to the oil-off performance of the powder metal component.

Kreider, Gary E.↗
NASA NTRS1989

Peroxides and the survivability of microorganisms on the surface of Mars

This paper discusses the possibility that any terrestrial microorganisms brought to Mars might survive the unhospitable environment of that planet, with special attention given to the effects of highly oxidizing material that is now known to cover the Martian surface. Data obtained by the gas exchange experiment on Viking indicate that, if all of the released oxygen is assumed to come from H2O2, the concentrations of H2O2 on Mars range from 25 to 250 ppm. Laboratory data indicate that certain soil bacteria are able to survive and grow to stationary phase at H2O2 concentrations as high as 30,000, indicating that, if there is H2O2 at the level of 250 ppm or even an order of magnitude greater on the Martian surface, this fact alone would not make the surface of Mars self-sterilizing.

Mancinelli, Rocco L.↗
NASA NTRS1992

Survivable algorithms and redundancy management in NASA's distributed computing systems

The design of survivable algorithms requires a solid foundation for executing them. While hardware techniques for fault-tolerant computing are relatively well understood, fault-tolerant operating systems, as well as fault-tolerant applications (survivable algorithms), are, by contrast, little understood, and much more work in this field is required. We outline some of our work that contributes to the foundation of ultrareliable operating systems and fault-tolerant algorithm design. We introduce our consensus-based framework for fault-tolerant system design. This is followed by a description of a hierarchical partitioning method for efficient consensus. A scheduler for redundancy management is introduced, and application-specific fault tolerance is described. We give an overview of our hybrid algorithm technique, which is an alternative to the formal approach given.

Malek, Miroslaw↗
NASA NTRS1992

Demonstrated survivability of a high temperature optical fiber cable on a 1500 pound thrust rocket chamber

A demonstration of the ability of an existing optical fiber cable to survive the harsh environment of a rocket engine was performed at the NASA Lewis Research Center. The intent of this demonstration was to prove the feasibility of applying fiber optic technology to rocket engine instrumentation systems. Extreme thermal transient tests were achieved by wrapping a high temperature optical fiber, which was cablized for mechanical robustness, around the combustion chamber outside wall of a 1500 lb Hydrogen-Oxygen rocket engine. Additionally, the fiber was wrapped around coolant inlet pipes which were subject to near liquid hydrogen temperatures. Light from an LED was sent through the multimode fiber, and output power was monitored as a function of time while the engine was fired. The fiber showed no mechanical damage after 419 firings during which it was subject to transients from 30 K to 350 K, and total exposure time to near liquid hydrogen temperatures in excess of 990 seconds. These extreme temperatures did cause attenuation greater than 3 dB, but the signal was fully recovered at room temperature. This experiment demonstrates that commercially available optical fiber cables can survive the environment seen by a typical rocket engine instrumentation system, and disclose a temperature-dependent attenuation observed during exposure to near liquid hydrogen temperatures.

Sovie, Amy L.↗
NASA NTRS1992

Atmospheric entry survival of large micrometeorites: Implications for their sources and for the cometary contribution to the zodiacal cloud

Atmospheric entry heating simulations indicate that a large fraction of the micrometeorites larger than 100 microns in diameter which survive atmospheric entry must have entered the Earth's atmosphere with velocities very near the Earth's escape velocity. Thus, these particles must have been captured by Earth from heliocentric orbits with small eccentricities and low inclinations, indicating a main-belt asteroidal source. Space exposure ages measured on these large micrometeorites are also consistent with a main-belt asteroidal source. However, dynamical calculations have previously indicated that particles larger than 100 microns in diameter were likely to be destroyed by catastrophic collisions in the time required for orbital evolution from the main-belt to Earth capture by Poynting-Robertson drag. The absence of a large amount of collisional debris in the less than 50 microns size range indicates these large micrometeorites are not the few, rare survivors of a mostly collisionally disrupted population. The measured space exposure ages, which are about an order of magnitude larger than their calculated catastrophic collision lifetimes, confirm the survival of these large micrometeorites for times much longer than the calculated catastrophic collision lifetimes. Since collisions with cometary dust less than 20 microns in size were expected to be the major contributor to the collisional destruction of these larger particles, the contribution of cometary material to the zodiacal cloud is likely to be much smaller than previously believed.

Flynn, George J.↗
NASA NTRS1993

Optimization of 15 parameters influencing the long-term survival of bacteria in aquatic systems

NASA is presently engaged in the design and development of a water reclamation system for the future space station. A major concern in processing water is the control of microbial contamination. As a means of developing an optimal microbial control strategy, studies were undertaken to determine the type and amount of contamination which could be expected in these systems under a variety of changing environmental conditions. A laboratory-based Taguchi optimization experiment was conducted to determine the ideal settings for 15 parameters which influence the survival of six bacterial species in aquatic systems. The experiment demonstrated that the bacterial survival period could be decreased significantly by optimizing environmental conditions.

Obenhuber, D. C.↗
NASA NTRS1995

Bend Properties of Sapphire Fibers at Elevated Temperatures: Bend Survivability - 1

The effect of temperature on the bend radius that a c-axis-oriented sapphire fiber can withstand was determined for fibers of various diameter. Bend stress rupture tests were performed for times of 1-100 h and temperatures of 300-1700 C. Fibers would survive the bend test undeformed, would fracture or would deform. The bend survival radius was determined to be the radius above which no fibers fractured or deformed for a given time-temperature treatment. It was found that the ability of fibers to withstand curvature decreases substantially with time and increasing temperature and that fibers of smaller diameter (46-83 micron) withstood smaller bend radii than would be expected from just a difference in fiber diameter when compared with the bend results of the fibers of large diameter (144 micron). This was probably due to different flaw populations, causing high temperature bend failure for the tested sapphire fibers of different diameters.

Morscher, Gregory N.↗
NASA NTRS1996

Survival of Potentially Pathogenic Human-Associated Bacteria in the Rhizosphere of Hydroponically Grown Wheat

Plants may serve as reservoirs for human-associated bacteria (H-AB) in long-term space missions containing bioregenerative life support systems. The current study examined the abilities of five human-associated potential pathogens, Pseudomonas aeruginosa, Pseudomonas cepacia, Staphylococcus aureus, Streptococcus pyogenes, and Escherichia coli, to colonize and grow in the rhizosphere of hydroponically grown wheat, a candidate crop for life support. All of these bacteria have been recovered from past NASA missions and present potential problems for future missions. The abilities of these organisms to adhere to the roots of axenic five-day-old wheat (Triticum aestivum L. cv. Yecora rojo) were evaluated by enumeration of the attached organisms after a one hour incubation of roots in a suspension (approximately 10(exp 8 cu/ml)) of the H-AB. Results showed that a greater percentage of P. aeruginosa cells adhered to the wheat roots than the other four H-AB. Similarly incubated seedlings were also grown under attempted axenic conditions for seven days to examine the potential of each organism to proliferate in the rhizosphere (root colonization capacity). P. cepacia and P. aeruginosa showed considerable growth. E. coli and S. aureus showed no significant growth, and S. pyogenes died off in the wheat rhizosphere. Studies examining the effects of competition on the survival of these microorganisms indicated that P. aeruginosa was the only organism that survived in the rhizosphere of hydroponically grown wheat in the presence of different levels of microbial competition.

Morales, Anabelle↗