SEARCH · Engineering Papers

Results for “surface area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Polysulfide-Permanganate Flow Battery Using Abundant Active Materials

A new flow battery is presented using the abundant and inexpensive active material pairs permanganate/manganate and disulfide/tetrasulfide. A wetted material set is identified for compatibility with the strongly oxidizing manganese couple at ambient and elevated temperatures. Both solutions allow high active material solubility, with cells tested at theoretical energy densities up to 43 Wh l −1 for the ∼1.2 V cell. Full cells built with nickel foam electrodes and sodium-exchanged Nafion 115 membranes deliver a baseline area-specific resistance of 2.7 Ω-cm 2 . Incorporation of high-surface-area cobalt-coated carbon paper and high-surface-area stainless steel mesh electrodes, and an expanded Nafion 115 membrane delivers cells with 44% lower resistance at 1.6 Ω-cm 2 . All cells show performance decay over the course of cycling. The Co-decorated carbon paper electrodes provide significant kinetic improvements, shifting electrode performance from non-linear with Ni-foam to linear with a volume-normalized exchange current density value of 3.2 A cm −3 . The expanded membrane provides increased conductivity over the 13 mS cm −1 conductivity observed in as-received, sodium-exchanged Nafion 115. Although boiled membranes provide improved conductivity, it is at the cost of decreased Coulombic efficiency and poorer manufacturability. Full cell models suggest that similar cell resistances (1.7 Ω-cm 2 ) should be feasible with as-received Nafion 115 and advanced electrodes.

25 ENERGY STORAGE↗

DOE OSTI2026

Zinc treatment to enhance nickel electrode performance for liquid alkaline water electrolyzers

Raney Ni treatment is introduced to the surface of Ni mesh anode electrodes, enhancing liquid alkaline water electrolyzer performance. The surface of the Ni mesh is alloyed with Zn, deposited by either an aqueous infiltration of Zn salt or direct reaction with Zn foil. The extent of alloying is controlled by a heat treatment step. For both processes, fine porosity and enhanced surface area are obtained after leaching the Zn out of the surface alloy layer. The observed electrode surface structure and performance is quite sensitive to the thermal treatment temperature. The enhanced surface area improves full cell performance by 90 mV for infiltrated Zn treated at 600 °C and by 185 mV for Zn foil reacted at 425 °C (at 2 A cm −2 and 80 °C). In conclusion, the Zn treatment methods produce stable operating performance, exhibiting no decay after 150 h for the infiltrated Zn treated at 600 °C, and a decay rate of 4.6 μV h −1 over 100 h for the Zn foil reacted at 425 °C (at 1 A cm −2 and 80 °C).

LAWE↗

DOE OSTI2022

Fe–N–C Boosts the Stability of Supported Platinum Nanoparticles for Fuel Cells

The poor durability of Pt-based nanoparticles dispersed on carbon black is the challenge for the application of long-life polymer electrolyte fuel cells. Recent work suggests that Fe- and N-codoped carbon (Fe-N-C) might be a better support than conventional high-surface-area carbon. In this work, we find that the electrochemical surface area retention of Pt/Fe-N-C is much better than that of commercial Pt/C during potential cycling in both acidic and basic media. In situ inductively coupled plasma mass spectrometry studies indicate that the Pt dissolution rate of Pt/Fe-N-C is 3 times smaller than that of Pt/C during cycling. Density functional theory calculations further illustrate that the Fe-N-C substrate can provide strong and stable support to the Pt nanoparticles and alleviate the oxide formation by adjusting the electronic structure. The strong metal-substrate interaction, together with a lower metal dissolution rate and highly stable support, may be the reason for the significantly enhanced stability of Pt/Fe-N-C. In conclusion, this finding highlights the importance of carbon support selection to achieve a more durable Pt-based electrocatalyst for fuel cells.

25 ENERGY STORAGE↗

DOE OSTI2022

Novel Amorphous Carbons for the Adsorption of Phosphate: Part I. Elucidation of Chemical Structure of N-Metal-Doped Chars

Due to phosphate’s necessity in agriculture and its danger to the environment, the development of adsorbents for its removal has been the subject of intensive research activity. Although the introduction of nitrogen functionality to chars and modification of biochar with metals have proven to change the character of the char structure, making it more active toward nutrients, there is no study regarding the doping of biochar with metals and nitrogen simultaneously for the adsorption of phosphates. This paper is the first of two in which we report the production, characterization, and evaluation of N-metal-doped biochars from cellulose for phosphate removal from liquid effluents. In this part, we describe the production and characterization of N-Ca-, N-Fe-, and N-Mg-doped biochars. The elemental composition and surface area of each of the materials produced is reported. Elemental and surface characterization of the chars are reported with the largest N content appearing at a temperature of 800 °C (12.5 wt %) and a maximum surface area for biochar produced at 900 °C (1314 m2/g). All of the adsorbents were visualized by scanning electron microscope (SEM), confirming that although there are some crystals on the surface of the biochar produced, most of the N, Mg, and Ca are part of the polyaromatic ring structure. Transmission electron microscope (TEM) images clearly show the formation of nanoclusters with the metals in the case of N-Fe and N-Ca biochars. The N-Mg biochars show a uniform distribution of the Mg through the carbon surface. X-ray photoelectron spectroscopy (XPS) studies of the biochars produced with metals and varying nitrogen levels clearly show Mg and Ca peaks shifting their position in the presence of N, suggesting the formation of stable structures between metals and N in the carbon polyaromatic ring system. To elucidate the nature of these structures, we conducted DFT-based calculations on different configurations of the nitrogenated structures. The calculated binding energy shifts were found to closely match the XPS experimental binding energy, confirming the likelihood of these structures in biochar. Finally, based on our experimental and modeling results, we hypothesize that an important fraction of the Mg and Ca is introduced to these biochars at the edges. Another fraction of Mg and Ca is in the form of phthalocyanine-like internal structures. More experimental studies are needed to confirm the formation of these very interesting structures and their potential use as adsorbents or catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Quantitative phenotyping of crop roots with spectral electrical impedance tomography: a rhizotron study with optimized measurement design

Background: Root systems are key contributors to plant health, resilience, and, ultimately, yield of agricultural crops. To optimize plant performance, phenotyping trials are conducted to breed plants with diverse root traits. However, traditional analysis methods are often labour-intensive and invasive to the root system, therefore limiting high-throughput phenotyping. Spectral electrical impedance tomography (sEIT) could help as a non-invasive and cost-efficient alternative to optical root analysis, potentially providing 2D or 3D spatio-temporal information on root development and activity. Although impedance measurements have been shown to be sensitive to root biomass, nutrient status, and diurnal activity, only few attempts have been made to employ tomographic algorithms to recover spatially resolved information on root systems. In this study, we aim to establish relationships between tomographic electrical polarization signatures and root traits of different fine root systems (maize, pinto bean, black bean, and soy bean) under hydroponic conditions. Results: Our results show that, with the use of an optimized data acquisition scheme, sEIT is capable of providing spatially resolved information on root biomass and root surface area for all investigated root systems. We found strong correlations between the total polarization strength and the root biomass (R 2 = 0.82) and root surface area (R 2 = 0.8). Our findings suggest that the captured polarization signature is dominated by cell-scale polarization processes. Additionally, we demonstrate that the resolution characteristics of the measurement scheme can have a significant impact on the tomographic reconstruction of root traits. Conclusion: Our findings showcase that sEIT is a promising tool for the tomographic reconstruction of root traits in high-throughput root phenotyping trials and should be evaluated as a substitute for traditional, often time-consuming, root characterization methods.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Process Scale-Up of an Energy-Efficient Membrane Solvent Extraction Process for Rare Earth Recycling from Electronic Wastes

This study reports the process scale-up and long-term performance of an energy-efficient and cost-effective membrane solvent extraction (MSX) process for separation and recovery of high purity rare earth oxides (REOs) from scrap permanent magnets (SPMs). Here, the rare earth elements (REEs), including dysprosium, neodymium, and praseodymium, are recovered from SPMs using a neutral extractant, tetraoctyl diglycolamide (TODGA) embedded in a microporous polypropylene hollow fiber membrane module. The MSX process performance is demonstrated with bench scale module with membrane surface area of 1.4 m 2 to industrial scale modules with membrane surface area of up to 20 m2 to enable the processing of up to 1 ton month –1 of SPMs. The purity and the yield of the recovered REOs are >99.5 wt% and >95%, respectively. The average extraction rate of REOs is >10 g m –2 hr –1 . A skid of MSX system is assembled with a membrane area of 40 m 2 . The MSX skid successfully recovers REOs with a capacity of 300 kg REOs/month. Finally, it is determined that the organic phase containing the extractant maintains its performance up to 250 h. The results suggest that the MSX process is an economically viable and environmentally friendly process for separation and recovery of REOs from electronic wastes.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Regioisomeric Spirobifluorene CANAL Ladder Polymers and Their Gas Separation Performance

For this work, we synthesized and characterized two isomeric microporous hydrocarbon ladder polymers from catalytic arene norbornene annulation (CANAL) of regioisomeric bis-norbornene fused spirobifluorenes, where the ladder chains are connected either through the same fluorene unit or across two different fluorene units in spirobifluorene. This pair of isomeric polymers was used to investigate the effect of ladder macromolecular structures on the microporosity and transport properties. Both polymers form mechanically intact films with thermal stability up to 480 °C and relatively high BET surface areas. The polymer formed from 2,7-dibromospirobifluorene showed higher BET surface area and higher gas permeability than the polymer from 2,2'-dibromospirobifluorene despite similar intersegmental spacing as indicated by X-ray scattering. The aging behavior for both polymers followed the same trend as the previously reported CANAL-fluorene polymers, with dramatically increased permselectivities over time, resulting in gas separation performance above the 2008 upper bounds for H 2 /CH 4 and O 2 /N 2 .

36 MATERIALS SCIENCE↗

DOE OSTI2024

Electrospun Nanofibers

Electrospun nanofibers have been considered promising separator candidates for lithium–sulfur (Li–S) batteries due to their unique properties, including but not limited to their high surface area, superior surface-to-volume ratio, excellent flexibility, good mechanical performance, etc. This chapter aims to provide an overview of research in electrospun nanofibers with their applications in Li–S batteries. It starts with a brief introduction to Li–S batteries, followed by the principle and advantages of electrospun nanofibers performed in this area. Applications of electrospun separators in Li–S batteries have been further discussed in detail. In the end, a future vision regarding challenges and perspectives is proposed to provide insightful comments in this field. It is believed that this chapter will provide an extensive and comprehensive reference to utilize this advanced technique to generate novel nanofiber separators for next-generation Li–S batteries.

Zhu, Jiadeng↗

DOE OSTI2020

Large-area nanostructured surfaces with tunable zeta potentials

Through a refined fabrication protocol based on block-copolymer self-assembly we synthesize nanostructured surfaces with conical nanopillars of different height (60, 120, and 200 nm) in hexagonal arrays with uniform spacing (~50 nm) over large areas (>cm 2 ). While the nanostructured surfaces fabricated on silicon substrates display superhydrophilic behavior, superhydrophobic properties are attained by coating with octadecyltrichlorosilane (OTS). Negative zeta potentials for all the studied surfaces are reported by electrokinetic flow measurements with aqueous KCl solutions at different concentrations (1 and 10 mM) and pH values between 4 and 8. While the surface nanostructure reduces the zeta potential magnitude, the hydrophobic OTS coating enhances it. Experimental results can be accounted for by a site-dissociation model for the surface charge density. The reported wetting properties and zeta potential tunability makes the studied surfaces particularly relevant for applications such as energy conversion and storage, membrane-based water treatment and molecular separation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

Heat transfer augmentation of natural convection heat sink through notched fin design

A novel notched fin heat sink with a central opening is proposed in the present study to augment the heat transfer performance of the natural convection heat sink under horizontal configuration. Thermal and airflow behavior in the heat sinks were studied using both experimental and numerical methods. The results showed that the performance of the conventional heat sink can be enhanced by optimizing its fin design. The basic heat sink model provided a 17% reduction in thermal resistance when its fin height and fin spacing were doubled, and it was accompanied by a 21% increase in surface area. The heat sink with a notched fin design with a less surface area offered a 13% lower thermal resistance compared to the basic model by entraining more airflow into the interior fin region. Providing a central opening in the notched fin heat sink can further reduce the thermal resistance by about 13%. Further, this study also analyzed the influence of emissivity of the heat sink on natural convection conditions. The findings demonstrated that the heat sink with an emissivity of 0.9 can reduce the thermal resistance by nearly 23% compared to one with an emissivity of 0.15.

42 ENGINEERING↗

DOE OSTI2024

Vacancy-Mediated Increases in Brine–Salt Surface Energies

Salt formations have been explored for the permanent isolation of spent nuclear fuel based on their high thermal conductivity, self-healing nature, and low hydraulic permeability to brine flow. Vacancy defect concentrations in salt complicate fracture mechanics not driven by dislocation dynamics and can influence the resulting surface structure. Classical molecular dynamic simulations were used to simulate tensile testing of salt crystals (halite) with vacancy defect concentrations of up to 0.5 defects/nm 3 . Increasing defect concentrations resulted in a decrease in ultimate tensile strength and fracture surface energies, driven by increased surface roughness rather than changes in the amount of surface area. Brine–salt surface energies of the fractured surfaces were 0.22 to 0.26 J/m 2 , significantly higher than values reported for atomically flat (100) surfaces at the same brine composition. This change in surface energy increased the brine–salt dihedral angle by ~27°. The dihedral angle threshold for percolation in salt is 60°, and a 27° increase due to rough fracture surfaces identifies a reduction in porosity percolation and a decrease in salt permeability. Therefore, bedded salt and salt domes may be even more stable than those previously predicted from dihedral angle calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Microwave heated chemical looping ammonia synthesis over Fe and CoMo particles

Chemical looping ammonia synthesis (CLAS) materials were subjected to a three cycle ammonia synthesis test under both conventional thermal heating and microwave heating. Microwave heating was found to outperform conventional heating for the first cycle on both Fe and CoMo materials. Principles of microwave catalysis and the heating of metallic particles may be generalized from this study; the dielectric loss tangent for optimum heating must fall within a realtively small range, ~0.8–1.4, and the penetration depth of the microwave into the particle must be considered and optimized for efficient heating, penetration depth should be on the same order as the particle size. The active phases of both catalysts, Fe 4 N and Co 3 Mo 3 N, were found to be responsive to microwave irradiation. Lastly, the deactivation and regeneration of the materials was studied by examining the BET surface areas by reforming surfaces with a low concentration gas phase oxidation reaction. This study sheds light on more general principles of microwave catalysis and on the scale-up of CLAS reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Optimizing Aluminum Bonding: Exploring Surface Roughness and Contact Angle Effects through Plasma and Acid Etching Contrasts

The use of adhesives to replace traditional techniques like welding and riveting has been on the rise in various industries as increasingly complex geometries and situations for bonding is required. It’s well known in the scientific community that an adhesive bond is only as efficient as the surface preparation used beforehand. Plasma treatments have been shown to gently clean the surface by only removing the top-most layer from the adherend and “charging” the surface instead of berating it. Whereas chemical treatments “etch” the surface in hopes of increasing surface area by increasing surface roughness. This method can be difficult to control quantitatively and can generate waste leading to serious environmental concerns. This study aims to address the encountered differences between plasma treatments and acid etching on aluminum substrates for adhesive bonding. Treating the surface of adherends plays a crucial role in promoting a good bond between adhesive and adherend. In this study, the effects of plasma and acid treatments are categorized using surface roughness measurements as well as contact angle which have been shown to correlate to mechanical strength. When evaluating different surface treatments, it is notable to mention that not only surface roughness and contact angle play a role in determining which method is most effective but also the consequences of the treatment itself. It was found that although chemical etching was the most effective in increasing roughness and decreasing contact angle, it generates a large amount of waste and is not sustainable compared to plasma work which uses a renewable process. The results from this work provide a deeper understanding of the relationship between surface treatments and surface roughness/contact angle and how this relates to a stronger adhesive bond.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Optimizing Aluminum Bonding: Exploring Surface Roughness and Contact Angle Effects through Plasma and Acid Etching Contrasts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Intraspecific Variation for Leaf Physiological and Root Morphological Adaptation to Drought Stress in Alfalfa ( Medicago sativa L.)

Drought stress reduces crop biomass yield and the profitability of rainfed agricultural systems. Evaluation of populations or accessions adapted to diverse geographical and agro-climatic environments sheds light on beneficial plant responses to enhance and optimize yield in resource-limited environments. This study used the morphological and physiological characteristics of leaves and roots from two different alfalfa subspecies during progressive drought stress imposed on controlled and field conditions. Two different soils (Experiments 1 and 2) imposed water stress at different stress intensities and crop stages in the controlled environment. Algorithm-based image analysis of leaves and root systems revealed key morphological and physiological traits associated with biomass yield under stress. The Medicago sativa subspecies (ssp.) sativa population, PI478573, had smaller leaves and maintained higher chlorophyll content (CC), leaf water potential, and osmotic potential under water stress. In contrast, M. sativa ssp. varia, PI502521, had larger leaves, a robust root system, and more biomass yield. In the field study, an unmanned aerial vehicle survey revealed PI502521 to have a higher normalized difference vegetation index (vegetation cover and plant health characteristics) throughout the cropping season, whereas PI478573 values were low during the hot summer and yielded low biomass in both irrigated and rainfed treatments. RhizoVision Explorer image analysis of excavated roots revealed a smaller diameter and a narrow root angle as target traits to increase alfalfa biomass yield irrespective of water availability. Root architectural traits such as network area, solidity, volume, surface area, and maximum radius exhibited significant variation at the genotype level only under limited water availability. Different drought-adaptive strategies identified across subspecies populations will benefit the plant under varying levels of water limitation and facilitate the development of alfalfa cultivars suitable across a broad range of growing conditions. The alleles from both subspecies will enable the development of drought-tolerant alfalfa with enhanced productivity under limited water availability.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Scalable synthesis of supported catalysts using fluidized bed atomic layer deposition

Overcoating layers deposited on the surface of heterogeneous catalysts using atomic layer deposition (ALD) have been shown to increase catalyst activity, lifetime, and selectivity. In this study, we performed Al 2 O 3 ALD and Pd ALD in a commercial fluidized bed reactor on high surface area mesoporous powder supports to create overcoated catalysts with high precursor utilization. We investigated the reaction mechanism for both Al 2 O 3 ALD and Pd ALD using in situ mass spectrometry and developed a mathematical model to understand the precursor saturation behaviors. We characterized the catalyst samples using a variety of techniques to measure the surface area, porosity, composition, and surface chemistry of the overcoated catalysts. Finally, we used propane dehydrogenation as a probe reaction to evaluate the performance of the catalysts prepared by fluidized bed ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Stochastic nucleation processes and substrate abundance explain time-dependent freezing in supercooled droplets

Atmospheric immersion freezing (IF), a heterogeneous ice nucleation process where an ice nucleating particle (INP) is immersed in supercooled water, is a dominant ice formation pathway impacting the hydrological cycle and climate. Implementation of IF derived from field and laboratory data in cloud and climate models is difficult due to the high variability in spatio-temporal scales, INP composition, and morphological complexity. We demonstrate that IF can be consistently described by a stochastic nucleation process accounting for uncertainties in the INP surface area. This approach accounts for time-dependent freezing, a wide range of surface areas and challenges phenomenological descriptions typically used to interpret IF. The results have an immediate impact on the current description, interpretation, and experiments of IF and its implementation in models. The findings are in accord with nucleation theory, and thus should hold for any supercooled liquid material that nucleates in contact with a substrate.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Design improvements for a recirculating reactor: Enhanced temperature measurement and sample-isolated reactivity in steady-state kinetic studies

Building upon a previous recirculating reactor design [S.A. Tenney, K. Xie, J.R. Monnier, A. Rodriguez, R.P. Galhenage, S. Audrey, D.A. Chen, Rev. Sci. Instrum. 84, 104101 (2013)], we present significant improvements that address key limitations in steady-state kinetic measurements for heterogeneous catalysis. The enhanced reactor design features direct sample heating with a focused IR lamp and temperature measurement in direct contact with the sample, enabling more accurate temperature control and improved kinetic analysis. A critical advancement is the isolation of sample reactivity from reactor wall contributions, ensuring that only the sample contributes to measured reaction rates. This was a limitation in earlier designs where the entire reactor contributed to the observed reactivity. The system incorporates a bypass flow cell for direct comparison with powder catalysts under identical conditions using a standard plug-flow reactor configuration. We demonstrate these capabilities through CO oxidation experiments on Pt(111) single crystals and graphene-passivated Pt(111), highlighting the system's ability to differentiate catalytic activity in model systems and directly compare them with high surface area powder catalysts. This reactor is particularly suited for thin films and low surface area catalysts that are not effectively evaluated in traditional flow reactors, especially for samples with low numbers of active sites or slow reaction rates.

36 MATERIALS SCIENCE↗