Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “support effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Modulation of the Effective Metal-Support Interactions for the Selectivity of Ceria Supported Noble Metal Nanoclusters in Atmospheric CO 2 Hydrogenation

Ever-increasing attention is given to the sustainable utilization of CO 2 in the atmosphere out of environmental and economic considerations. The deep-going clarification of the effective and ineffective metal-support interactions (MSI) in the supported catalysts for the catalytic performance of CO 2 hydrogenation is particularly needed to design highly active nanocatalysts. How to tune the MSI to be effective for the selectivity of goal hydrogenation products is a significant but rather challenging subject. In this work, we demonstrate that the selectivity in CO 2 hydrogenation can be regulated from preferential CH 4 production to preferential CO production by varying the nature of the electronic MSI for ceria supported noble metal nanoclusters, and the effective MSI play a pivotal role for the catalytic systems with opposite hydrogenation selectivity. The modulation of the effective MSI for the selectivity in CO 2 hydrogenation sheds new light on the comprehensive understanding of the MSI and interfacial effects in terms of tailoring and controlling the performance of supported heterogeneous catalysts.

36 MATERIALS SCIENCE↗
NASA NTRS1974

Investigation of the effect of hub support parameters on two-bladed rotor oscillatory loads

The results are presented of a test program and analysis to investigate the effects of inplane hub support parameters on the oscillatory chordwise loads of a two-bladed teetering rotor. The test program was conducted in two phases. The first consisted of a shake test to define the impedance of a number of test configurations as a function of frequency. The second phase was the test of these configurations in the NASA-Langley transonic dynamics tunnel. The test showed that the one-per-rev inplane bending moments could be changed by a factor of 2.0 as a function of the pylon configuration at the same aerodynamic operating condition. The higher harmonic inplane, flapwise, and torsional bending moments, and pitch link axial loads were not affected by changes in inplane hub impedance. The maximum inplane loads occurred for the pylon configuration with the minimum spring rate and maximum inertia.

Lee, C. D.↗
NASA NTRS1998

An Analysis of Failure Handling in Chameleon, A Framework for Supporting Cost-Effective Fault Tolerant Services

The desire for low-cost reliable computing is increasing. Most current fault tolerant computing solutions are not very flexible, i.e., they cannot adapt to reliability requirements of newly emerging applications in business, commerce, and manufacturing. It is important that users have a flexible, reliable platform to support both critical and noncritical applications. Chameleon, under development at the Center for Reliable and High-Performance Computing at the University of Illinois, is a software framework. for supporting cost-effective adaptable networked fault tolerant service. This thesis details a simulation of fault injection, detection, and recovery in Chameleon. The simulation was written in C++ using the DEPEND simulation library. The results obtained from the simulation included the amount of overhead incurred by the fault detection and recovery mechanisms supported by Chameleon. In addition, information about fault scenarios from which Chameleon cannot recover was gained. The results of the simulation showed that both critical and noncritical applications can be executed in the Chameleon environment with a fairly small amount of overhead. No single point of failure from which Chameleon could not recover was found. Chameleon was also found to be capable of recovering from several multiple failure scenarios.

Haakensen, Erik Edward↗
NASA NTRS2003

Carbon balance in bioregenerative life support systems: some effects of system closure, waste management, and crop harvest index

In Advanced Life Support (ALS) systems with bioregenerative components, plant photosynthesis would be used to produce O2 and food, while removing CO2. Much of the plant biomass would be inedible and hence must be considered in waste management. This waste could be oxidized (e.g., incinerated or aerobically digested) to resupply CO2 to the plants, but this would not be needed unless the system were highly closed with regard to food. For example, in a partially closed system where some of the food is grown and some is imported, CO2 from oxidized waste when combined with crew and microbial respiration could exceed the CO2 removal capability of the plants. Moreover, it would consume some O2 produced from photosynthesis that could have been used by the crew. For partially closed systems it would be more appropriate to store or find other uses for the inedible biomass and excess carbon, such as generating soils or growing woody plants (e.g., dwarf fruit trees). Regardless of system closure, high harvest crops (i.e., crops with a high edible to total biomass ratio) would increase food production per unit area and O2 yields for systems where waste biomass is oxidized to recycle CO2. Such interlinking effects between the plants and waste treatment strategies point out the importance of oxidizing only that amount of waste needed to optimize system performance. Published by Elsevier Science Ltd on behalf of COSPAR.

NASA Discipline Life Support Systems↗
DOE OSTI2022

Synthesizing Carbon‐Supported, High‐Loading, Ultra‐Small Pt 3 Ni Nanoparticles via Tuning the Surface Electrostatic Effect

Carbon‐supported nanoparticles (NPs) are widely used as catalysts in fuel cells and electrolyzers. While it is well known that NPs with smaller size and higher loading often lead to better catalytic activity, they remain challenging to synthesize due to the weak control over the surface properties of the support. Herein, a facile approach to synthesize carbon‐supported, high‐loading, and ultra‐small Pt 3 Ni NPs via applying thermal shock on strongly interacted carbon support with metal salt is reported. Specifically, sodium citrate is introduced into the precursor solution and substrate mixture, which induces strong electrostatic effect between metal salts and carbon particles that markedly improves precursor anchoring and dispersion, thereby achieving high particle loading as well as small size and distribution. As a proof‐of‐concept, the synthesis of Pt 3 Ni NPs supported on carbon black with particle size of 1.56 ± 0.36 nm at 30 wt% loading and 1.66 ± 0.56 nm at 40 wt% loading is reported, where the sizes are among the smallest while the loadings are among the highest in the literature. This approach can be readily extended to many compositions and substrates, with tunable particle size and loading, thereby substantially expanding the synthesis space for NP catalysts in various electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Optical antenna gain. III - The effect of secondary element support struts on transmitter gain

The effect of a secondary-element spider support structure on optical antenna transmitter gain is analyzed. An expression describing the influence of the struts on the axial gain, in both the near and far fields, is derived as a function of the number of struts and their width. It is found that, for typical systems, the struts degrade the on-axis gain by less than 0.4 dB, and the first side-lobe level is not increased significantly. Contour plots have also been included to show the symmetry of the far-field distributions for three- and four-support members.

Klein, B. J.↗
NASA NTRS2002

Recovery of resources for advanced life support space applications: effect of retention time on biodegradation of two crop residues in a fed-batch, continuous stirred tank reactor

Bioreactor retention time is a key process variable that will influence costs that are relevant to long distance space travel or long duration space habitation. However. little is known about the effects of this parameter on the microbiological treatment options that are being proposed for Advanced Life Support (ALS) systems. Two bioreactor studies were designed to examine this variable. In the first one, six retention times ranging from 1.3 to 21.3 days--were run in duplicate, 81 working-volume continuous stirred tank reactors (CSTR) that were fed ALS wheat residues. Ash-free dry weight loss, carbon mineralization, soluble TOC reduction, changes in fiber content (cellulose, hemicellulose, and lignin), bacterial numbers, and mineral recoveries were monitored. At short retention times--1.33 days--biodegradation was poor (total: 16-20%, cellulose - 12%, hemicellulose - 28%) but soluble TOC was decreased by 75-80% and recovery of major crop inorganic nutrients was adequate, except for phosphorus. A high proportion of the total bacteria (ca. 83%) was actively respiring. At the longest retention time tested, 21.3 days, biodegradation was good (total: 55-60%, cellulose ca. 70%, hemicellulose - ca. 55%) and soluble TOC was decreased by 80%. Recovery of major nutrients, except phosphorus, remained adequate. A very low proportion of total bacteria was actively respiring (ca. 16%). The second bioreactor study used potato residue to determine if even shorter retention times could be used (range 0.25-2.0 days). Although overall biodegradation deteriorated, the degradation of soluble TOC continued to be ca. 75%. We conclude that if the goal of ALS bioprocessing is maximal degradation of crop residues, including cellulose, then retention times of 10 days or longer will be needed. If the goal is to provide inorganic nutrients with the smallest volume/weight bioreactor possible, then a retention time of 1 day (or less) is sufficient.

Non-NASA Center↗
NASA NTRS1923

Model supports and their effects on the results of wind tunnel tests

The airflow about a model while being tested is often sufficiently affected by the model support to lead to erroneous conclusions unless appropriate corrections are used. In this paper some new material on the subject is presented, together with a review of the airfoil support corrections used in several other laboratories.

Bacon, David L↗
DOE OSTI2021

Reversing sintering effect of Ni particles on γ-Mo 2 N via strong metal support interaction

Reversing the thermal induced sintering phenomenon and forming high temperature stable fine dispersed metallic centers with unique structural and electronic properties is one of the ever-lasting targets of heterogeneous catalysis. Here we report that the dispersion of metallic Ni particles into under-coordinated two-dimensional Ni clusters over γ-Mo 2 N is a thermodynamically favorable process based on the AIMD simulation. A Ni-4nm/γ-Mo 2 N model catalyst is synthesized and used to further study the reverse sintering effect by the combination of multiple in-situ characterization methods, including in-situ quick XANES and EXAFS, ambient pressure XPS and environmental SE/STEM etc. The under-coordinated two-dimensional layered Ni clusters on molybdenum nitride support generated from the Ni-4nm/γ-Mo 2 N has been demonstrated to be a thermally stable catalyst in 50 h stability test in CO 2 hydrogenation, and exhibits a remarkable catalytic selectivity reverse compared with traditional Ni particles-based catalyst, leading to a chemo-specific CO 2 hydrogenation to CO.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Effects of periodic weight support on medial gastrocnemius fibers of suspended rats

The effects of seven-day-long hindlimb suspension (HS) and HS plus daily periodic weight support activity on the size and metabolic properties of individual fibers in the medial gastrocnemius (MG) of rats were examined. Sections of muscle tissue removed after seven day suspension were stained quantitatively for succinate dehydrogenase and alpha-glycerophosphate dehydrogenase, and qualitatively for myosin ATPase. It was found that short intermittent periods of weight support had a beneficial effect in maintaining the size and metabolic properties of both dark and light ATPase fibers in the deep regions (i.e., close to the bone) and of dark ATPase fibers in the superficial regions of the MG. The effect was greater in the deep regions.

Graham, Scot C.↗
DOE OSTI2021

Supporting cost-effective watershed management strategies for Chesapeake Bay using a modeling and optimization framework

Extensive efforts to adaptively manage nutrient pollution rely on Chesapeake Bay Program’s (Phase 6) Watershed Model, called Chesapeake Assessment Scenario Tool (CAST), which helps decision-makers plan and track implementation of Best Management Practices (BMPs). We describe mathematical characteristics of CAST and develop a constrained nonlinear BMP-subset model, software, and visualization framework. This represents the first publicly available optimization framework for exploring least-cost strategies of pollutant load control for the United States’ largest estuary. The optimization identifies implementation options for a BMP subset modeled with load reduction effectiveness factors, and the web interface facilitates interactive exploration of >30,000 solutions organized by objective, nutrient control level, and for ~200 counties. We assess framework performance and demonstrate modeled cost improvements when comparing optimization-suggested proposals with proposals inspired by jurisdiction plans. Stakeholder feedback highlights the framework’s current utility for investigating cost-effective tradeoffs and its usefulness as a foundation for future analysis of restoration strategies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Not all platinum surfaces are the same: Effect of the support on fundamental properties of platinum adlayer and its implications for the activity toward hydrogen evolution reaction

The adsorption of atomic hydrogen on a platinum monolayer supported on orthorhombic Mo 2 C(100) surface has been investigated, considering different hydrogen surface coverages. Calculations have been performed using density functional theory with the Perdew-Burke-Ernzerhof exchange correlation functional and a D3 Van der Waals corrections. The theoretical insight has been gained into atomic hydrogen interaction with Pt monolayer, supported on both molybdenum and well-studied tungsten carbide, and considering hydrogen surface coverage. Fundamental properties of Pt adlayer depend on the support, affecting hydrogen evolution activity of the resulting systems. At low hydrogen coverage all systems, with the exception of Pt supported on the molybdenum-terminated Mo 2 C, adsorb H comparably to a pristine Pt(111) surface and their high activity for the hydrogen evolution reaction is predicted. Additionally, at higher coverages supported Pt monolayers interact with atomic hydrogen unlike the Pt(111), suggesting that the activity of the supported and unsupported platinum toward hydrogen evolution reaction have different origins. Furthermore, the position of the supported platinum monolayers on the volcano curve is a function of the surface coverage, more so than for extended metal surfaces. Therefore, hydrogen surface coverage is a key variable to understand the catalytic potential, approaching towards an improved model for screening of electrocatalytic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of Carbon Support Heat Treatment on the Performance of Ion-Pair High-Temperature PEM Fuel Cells

Heat treatment can significantly alter the physical and chemical properties of carbon supports, thereby influencing the performance of proton exchange membrane (PEM) fuel cells. This study explores how varying carbon heat treatment temperatures—from 1,000 °C to 2,200 °C—affect the structure and performance of platinum-based catalysts in high-temperature PEM fuel cells. Increasing the heat treatment temperature led to a notable decrease in surface area, along with increases in carbon grain size and hydrophobicity. Although the catalyst supported on carbon treated at 1,000 °C exhibited the highest catalyst activity, the MEA using carbon treated at 1,500 °C delivered the best overall fuel cell performance. This is attributed to an optimized balance between hydrophobicity and accessible surface area, which enhances water management and catalyst utilization. These findings underscore the importance of carbon support engineering in improving the efficiency of ion-pair high-temperature PEM fuel cells.

08 HYDROGEN↗
NASA NTRS1974

Aerodynamic results of support system interference effects tests conducted in NASA/ARC 6 by 6-foot supersonic wind tunnel using an 0.015-scale model of the configuration 14OA/B SSV orbiter (OA59), volume 1

An experimental aerodynamic investigation was conducted in the NASA/ARC 6- by 6-foot supersonic wind tunnel on an 0.015-scale configuration 140A/B SSV Orbiter model. The primary objective was to determine the extent aerodynamic simulation is compromised by sting base mounting with MPS nozzles removed. Both a conventional sting (through the base) and an alternate model mounting system were utilized. The alternate mounting system consisted of a non-metric blade strut, which approximated the vertical tail and entered the model through the upper aft section of its fuselage. The model was tested both in and out of the presence of a dummy sting with and without MPS nozzles when on the alternate mounting system. Data were obtained at Mach numbers from 0.6 through 2.0, a Reynolds number of 2.5 million per foot, angles of attack from -4 through 14 degrees, angles of sideslip from -15 through 15 degrees, elevon deflections of 0 and 15 degrees, and bodyflap deflections of -11.7, 0, and 16.3 degrees.

Campbell, J. H., II↗