SEARCH · Engineering Papers

Results for “suitability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Integration of CO 2 capture and microalgae cultivation: demonstration assessment of outdoor Scenedesmus acutus cultivation using gaseous ammonia as a nitrogen source

Towards the goal of integrating CO 2 capture using aqueous ammonia with its utilization for algae cultivation, Scenedesmus acutus (UTEX B72) was grown in 1100 L open raceway ponds using CO 2 and NH 3 supplied from gas cylinders. CO 2 /NH 3 mole ratios of 7 and 10 were employed, the gas mixture acting as a surrogate for the output from a CO 2 scrubbing system using aqueous ammonia. Compared to Scenedesmus acutus grown in open ponds using gaseous CO 2 and NaNO 3 as the N-source, the ponds supplied with gaseous CO 2 and NH 3 displayed higher productivity at both CO 2 /NH 3 ratios, with the higher ratio providing the best growth. Depending on the culturing conditions and CO 2 /NH 3 ratio, CO 2 utilization ranged up to 15.8% and NH 3 utilization to 23.0%. These rather low values reflect the fact the high CO 2 /NH 3 feed rate used, resulting in a substantial release of NH 3 from the ORPs (~45%). Finally, these findings demonstrate the suitability of gaseous NH 3 as a N-source for microalgae cultivation, while highlighting the need for a control strategy that closely balances the CO 2 /NH 3 supply with the algae growth rate. The produced algae biomass possessed a high protein and low ash content, rendering it particularly suitable for use as a bioplastic feedstock.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Ionic Thermoelectric Generators in Vertical and Planar Topologies Based on Fluorinated Polymer Hybrid Materials with Ionic Liquids

Abstract Ionic thermoelectrics (TEs), in which voltage generation is based on ion migration, are suitable for applications based on their low cost, high flexibility, high ionic conductivity, and wide range of Seebeck coefficients. This work reports on the development of ionic TE materials based on the poly(vinylidene fluoride‐trifluoroethylene), Poly(VDF‐co‐TrFE), as host polymer blended with different contents of the ionic liquid, IL, 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI]. The morphology, physico‐chemical, thermal, mechanical, and electrical properties of the samples are evaluated together with the TE response. It is demonstrated that the IL acts as a nucleating agent for polymer crystallization. The mechanical properties and ionic conductivity values are dependent on the IL content. A high room temperature ionic conductivity of 0.008 S cm −1 is obtained for the sample with 60 wt% of [EMIM][TFSI] IL. The TE properties depend on both IL content and device topology‐vertical or planar‐the largest generated voltage range being obtained for the planar topology and the sample with 10 wt% of IL content, characterized by a Seebeck coefficient of 1.2 mV K −1 . Based on the obtained maximum power density of 4.9 µW m −2 , these materials are suitable for a new generation of TE devices.

Pereira, Nelson↗

DOE OSTI2023

Shear and combustion characterization of printable ammonium perchlorate composite propellant formulations

Seven formulations of ammonium perchlorate composite propellant (APCP) are developed and their properties relevant for successful additive manufacture are characterized. Extrusion in a custom-built 3D printing system and spindle viscometry are used to collect viscosity measurements of curing primary and non-curing secondary versions of the formulations. The formulations that behave similarly to a Bingham plastic, with apparent viscosities between 4 and 8 thousand Pa*s at 30 minutes post-mix, are determined to be most suitable for printing applications. Measurements of one material show a yield stress of 1 kPa. Ambient pressure burn rates of 2.0–2.9 mm/s were measured for the compositions tested. All measured burn rates were comparable to the lower end of typical burn rates for APCP. In conclusion, the results of the characterization demonstrate a propellant suitable for use in a 3D printing system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Witnessing Entanglement and Quantum Correlations in Condensed Matter: A Review

The detection and certification of entanglement and quantum correlations in materials is of fundamental and far-reaching importance, and has seen significant recent progress. It impacts both the understanding of the basic science of quantum many-body phenomena as well as the identification of systems suitable for novel technologies. Frameworks suitable to condensed matter that connect measurements to entanglement and coherence have been developed in the context of quantum information theory. These take the form of entanglement witnesses and quantum correlation measures. Here, the underlying theory of these quantities, their relation to condensed matter experimental techniques, and their application to real materials are comprehensively reviewed. In addition, their usage in, e.g., protocols, the relative advantages and disadvantages of witnesses and measures, and future prospects in, e.g., correlated electrons, entanglement dynamics, and entangled spectroscopic probes, are presented. Consideration is given to the interdisciplinary nature of this emerging research and substantial ongoing progress by providing an accessible and practical treatment from fundamentals to application. Particular emphasis is placed on quantities accessible to collective measurements, including by susceptibility and spectroscopic techniques. This includes the magnetic susceptibility witness, one-tangle, concurrence and two-tangle, two-site quantum discord, and quantum coherence measures such as the quantum Fisher information.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Uncovering the Size-dependent Thermal Solid Transformation of Akaganéite

Investigating the structural evolution and phase transformation of iron oxides is crucial for gaining a deeper understanding of geological changes on diverse planets and preparing oxide materials suitable for industrial applications. In this study, we employed in-situ heating techniques in conjunction with transmission electron microscopy (TEM) observations and ex-situ characterization to thoroughly analyze the thermal solid-phase transformation of akaganéite one-dimensional (1D) nanostructures with varying diameters. Our findings offer compelling evidence for a size-dependent morphology evolution in akaganéite 1D nanostructures, which can be attributed to the transformation from akaganéite to maghemite (?-Fe2O3) and subsequent crystal growth. Specifically, we observed that akaganéite nanorods with a diameter of around 50 nm transformed into hollow polycrystalline maghemite nanorods, which demonstrated remarkable stability without arresting crystal growth under continuous heating. In contrast, smaller akaganéite nanoneedles or nanowires with a diameter ranging from 20 to 8 nm displayed a propensity for forming single-crystal nanoneedles or nanowires through phase transformation and densification. By manipulating the size of the precursors, we have developed a straightforward method for the synthesis of single-crystal and polycrystalline maghemite nanowires through solid-phase transformation. These significant findings provide new insights into the size-dependent structural evolution and phase transformation of iron oxides at the nanoscale.

Wang, Xiang↗

DOE OSTI2024

Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing: Preprint

Efforts toward decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a more reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of polycarboxylate ether admixtures with a smaller carbon footprint. The present study examines the use of lignin-based water-reducing admixture in cement pastes and mortar mixtures for 3D printing. The experimental program explores the use of different dosages of lignin-based admixture to produce 3D-printed samples with appropriate extrudability and buildability. The rheological characterization was performed to determine the flow curve of various mixtures. Finally, the heat of hydration of cement pastes was monitored via isothermal calorimetry to assess the impact of lignin-based admixtures on the hydration process of cement. The results of this study indicate that the use of biomass by-products, such as lignin-based admixtures have great potential to effectively control the fresh-state properties of cement-based materials.

bio-based admixtures↗

DOE OSTI2026

Scalar-induced neutrinoless double beta decay in SU(5)

We discuss the role of heavy scalar fields in mediating neutrinoless double beta decay (0νββ) within the SU(5) Grand Unified Theory framework, extended suitably to include neutrino mass. In such a minimal realistic SU(5) setup for fermion masses, the scalar contributions to 0νββ are extremely suppressed as a consequence of the proton decay bound. We circumvent this problem by imposing a discrete Z 3 symmetry. However, the scalar contributions to 0νββ remain suppressed in this SU(5) x Z 3 model due to the neutrino mass constraint. We find that the 0νββ contribution can be enhanced by extending the scalar sector with an additional 15-dimensional scalar representation with suitable Z 3 charge. Such an extension not only yields realistic fermion mass spectra but also leads to experimentally testable predictions in upcoming ton-scale 0νββ searches, which can be used as a sensitive probe of the new scalars across a broad range, from LHC-accessible scales up to ∼ 10 10 GeV.

Baryon/Lepton Number Violation↗

DOE OSTI2023

The sub-leading scattering waveform from amplitudes

We compute the next-to-leading order term in the scattering waveform of uncharged black holes in classical general relativity and of half-BPS black holes in $\mathcal{N}$ = 8 supergravity. We propose criteria, generalizing explicit calculations at next-to-leading or der, for determining the terms in amplitudes that contribute to local observables. For general relativity, we construct the relevant classical integrand through generalized unitary in two distinct ways, (1) in a heavy-particle effective theory and (2) in general relativity minimally-coupled to scalar fields. With a suitable prescription for the matter propagator in the former, we find agreement between the two methods, thus demonstrating the absence of interference of quantum and classically-singular contributions. The classical $\mathcal{N}$ = 8 integrand for massive scalar fields is constructed through dimensional reduction of the known five-point one-loop integrand. Our calculation exhibits novel features compared to conservative calculations and inclusive observables, such as the appearance of master integrals with intersecting matter lines and the appearance of a classical infrared divergence whose absence from classical observables requires a suitable definition of the retarded time.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Ag-doped As–S–Se chalcogenide glasses: a correlative study of structural and dielectrical properties

This work is focused on investigating the effect of Ag doping on the dielectric and structural properties of the As–S–Se glass system and their suitability for potential applications in optoelectronics, such as electronic and switching components. A series of glasses from the system Agx(As40S30Se30)100-x (x = 5 at.% Ag) were prepared with melt-quenching technique. Morphological and compositional analysis was performed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. Raman spectroscopy measurements have shown structural modifications of the glass network upon Ag doping, with creation of new Ag–(S,Se)–As structures, resulting in increased number of defect states. Variations in dielectric permittivity (e') and dielectric loss (e") were investigated in a wide frequency and temperature range, and explained by dominant dipolar and electronic polarization, as well as correlated with the observed structural changes. Improvement in dielectric properties is observed upon doping with Ag. Furthermore, the low dielectric tangent loss at high frequencies for all glassy samples points to a beneficial ability of the material to absorb energy of the external electric field. Good thermal stability of these glasses is confirmed by the calculated temperature coefficient of the dielectric permittivity. Density of localized states in all glasses was determined from AC conductivity and the dielectric tangent loss using a correlated barrier hopping model, and found to increase with Ag concentration. The overall results suggest that Ag doping enhances the electrical and optical quality of this type of glasses, making them suitable as nonlinear optical materials and their applications in devices.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Full-Array Noise Performance of Deployment-Grade SuperSpec mm-Wave On-Chip Spectrometers

SuperSpec is an on-chip filter bank spectrometer designed for wideband moderate-resolution spectroscopy at millimeter wavelengths, employing TiN kinetic inductance detectors. SuperSpec technology will enable large-format spectroscopic integral field units suitable for high-redshift line intensity mapping and multi-object spectrographs. In previous results, we have demonstrated noise performance in individual detectors suitable for photon noise-limited ground-based observations at excellent mm-wave sites. Here, we present the noise performance of a full R similar to 275 spectrometer measured using deployment-ready RF hardware and software. We report typical noise equivalent powers through the full device of similar to 3x10 -16 W Hz -1/2 at expected sky loadings, which are photon noise dominated. Based on these results, we plan to deploy a six-spectrometer demonstration instrument to the Large Millimeter Telescope in early 2020.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Development of 52Mn Labeled Trastuzumab for Extended Time Point PET Imaging of HER2

Abstract Purpose Due to their long circulation time in the blood, monoclonal antibodies (mAbs) such as trastuzumab, are usually radiolabeled with long-lived positron emitters for the development of agents for Positron Emission Tomography (PET) imaging. Manganese-52 ( 52 Mn, t 1/2 = 5.6 d, β + = 29.6%, E(β ave ) = 242 keV) is suitable for imaging at longer time points providing a complementary technique to Zirconium-89 ( 89 Zr, t 1/2 = 3.3 d, β + = 22.7%, E(β ave ) = 396 keV)) because of its long half-life and low positron energy. To exploit these properties, we aimed to investigate suitable bifunctional chelators that could be readily conjugated to antibodies and labeled with 52 Mn under mild conditions using trastuzumab as a proof-of-concept. Procedures Trastuzumab was incubated with S-2-(4-isothiocyanatobenzyl)-1,4,7,10-tetraazacyclododecane tetraacetic acid (p-SCN-Bn-DOTA), 1-Oxa-4,7,10-tetraazacyclododecane-5-S-(4-isothiocyantobenzyl)-4,7,10-triacetic acid (p-SCN-Bn-Oxo-DO3A), and 3,6,9,15-tetraazabicyclo[9.3.1] pentadeca-1(15),11,13-triene-4-S-(4-isothiocyanatobenzyl)-3,6,9-triacetic acid (p-SCN-Bn-PCTA) at a tenfold molar excess. The immunoconjugates were purified, combined with [ 52 Mn]MnCl 2 at different ratios, and the labeling efficiency was assessed by iTLC. The immunoreactive fraction of the radiocomplex was determined through a Lindmo assay. Cell studies were conducted in HER2 + (BT474) and HER2- (MDA-MB-468) cell lines followed by in vivo studies. Results Trastuzumab-Oxo-DO3A was labeled within 30 min at 37 °C with a radiochemical yield (RCY) of 90 ± 1.5% and with the highest specific activity of the chelators investigated of 16.64 MBq/nmol. The labeled compound was purified with a resulting radiochemical purity of > 98% and retained a 67 ± 1.2% immunoreactivity. DOTA and PCTA immunoconjugates resulted in < 50 ± 2.5% (RCY) with similar specific activity. Mouse serum stability studies of [ 52 Mn]Mn-Oxo-DO3A-trastuzumab showed 95% intact complex for over 5 days. Cell uptake studies showed higher uptake in HER2 + (12.51 ± 0.83% /mg) cells compared to HER2- (0.85 ± 0.10%/mg) cells. PET images of mice bearing BT474 tumors showed high tumor uptake that was consistent with the biodistribution (42.02 ± 2.16%ID/g, 14 d) compared to MDA-MB-468 tumors (2.20 ± 0.80%ID/g, 14 d). Additionally, both models exhibited low bone uptake of < 1% ID/g. Conclusion The bifunctional chelator p-SCN-Bn-Oxo-DO3A is promising for the development of 52 Mn radiopharmaceuticals as it was easily conjugated, radiolabeled at mild conditions, and illustrated stability for a prolonged duration both in vitro and in vivo . High-quality PET/CT images of [ 52 Mn]Mn-Oxo-DO3A-trastuzumab were obtained 14 d post-injection. This study illustrates the potential of [ 52 Mn]Mn-Oxo-DO3A for the evaluation of antibodies using PET imaging.

Omweri, James M.↗

DOE OSTI2025

Effectiveness of nature-based solutions to reduce flooding in Quad Cities Metro Area (QCMA) using SWMM-HEC based flood model

Nature-based solutions (NbS) have gained significant attention as strategies for addressing urban environmental challenges, particularly since the establishment of the UN Sustainable Development Goals (SDGs) for 2030. However, the current research on NbS for urban flood management lacks comprehensive methodological approaches for identifying suitable areas and evaluating their effectiveness across different urban settings. Here, this study attempts to fill this gap by proposing a methodological framework integrating multi-criteria analysis with a SWMM-HEC-based hydrologic and hydraulic (HH) model to assess the suitability of NbS for the Quad Cities Metro Area (QCMA), consisting of Davenport, Bettendorf, Moline, and Rock Island. Eight NbS options-green roofs, rain gardens, infiltration trenches, permeable pavements, vegetative swales, dry detention basins, retention ponds, and rain barrels/cisterns - were considered based on volumetric efficiency and runoff reduction efficiency. The study reveals that implementing the proposed NbS could have substantially reduced flood depths in key historical flood events by 21% in 1993, 15% in 2008, 16% in 2011, 23% in 2014, 40% in 2019, and 10% in 2023. The findings highlight a critical trade-off between peak runoff and NbS implementation: while NbS effectively reduce flood impacts, they also enhance volumetric efficiency by approximately 43%. In high-density areas of the QCMA, flood depth reductions of around 20% suggest that NbS are a viable solution for dense urban environments with limited space. This shows the potential for integrating NbS into existing infrastructure, offering a promising approach for cities facing increasing flooding risks. The proposed methodology provides a practical framework for incorporating NbS into urban stormwater management, addressing gaps in optimizing NbS performance, and offering a pathway to scale their application in other urban areas with various environmental and social contexts.

CMIP6↗

DOE OSTI2024

Design of a Three-Layer Impactor for Material Strength Measurements at Multi-Megabar Pressures

Off-Hugoniot loading methods for dynamic compression have been a topic of interest for many years as a means of accessing high pressures without melting a material. Simulations and an initial test experiment of a three-layer gas-gun impactor suitable for use in measuring dynamic material strength at multi-megabar pressures are described. As shown through ARES hydrocode simulations, an impactor consisting of a low-, medium-, and high-impedance material, such as TPX, Al, and Ta or Pt, can produce a quasi-isentropic loading path up to 4.6 Mbar pressure with a low homologous temperature (T/T melt = 0.1–0.25). These impactors can also be tailored to create a pressure drive suitable for a Lagrangian sound speed experiment. Simulated in-situ velocities were analyzed to determine the change in calculated strength due to non-uniformity in the impactor, which provides a measure of error sensitivity. An initial test of a three-layer projectile onto a flat target at 4.4 km/s impact velocity is reported. Finally, while the impactor incurred some delamination during firing, the measured sample/window interface velocity generally agrees with the simulated peak velocity and subsequent release, indicating the feasibility of this approach for measuring material strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Assessing the Extractability of Rare Earth Elements from Coal Preparation Fines Refuse Using an Organic Acid Lixiviant

We report that this work is a first-order study to assess the suitability of an organic acid lixiviant to extract rare earth elements (REE) from coal preparation fines refuse sourced from a Pennsylvania mine with a total REE of ~ 300 ppm. The extraction of REE using an organic acid, in this case 0.1 M citric acid and 0.5 M trisodium citrate solution, is compared against 0.5 M (NH 4 ) 2 SO 4 , 1 M HCl, 1.2 M H 2 SO 4 , and 0.5 M ethylenediaminetetraacetic acid (EDTA). Ashing the coal waste material prior to leaching tests with the citrate solution nominally improved REE extraction. Buffered citrate solution recovered 7% of the total REE in the as-received Isabella Fines as compared to 11% in ashed samples, whereas (NH 4 ) 2 SO 4 extracted 5–6%, respectively. EDTA recovered up to 33% of the total REE, most likely due to the higher coordination chelate bond. Mineral acids, however, outperformed the organic acids on ashed material (16–52% REE recovery), suggesting that organic acids may not be a suitable competitive option for REE extraction from these types of feedstocks.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2026

A meshing framework for digital twins for extrusion based additive manufacturing

Additive manufacturing (AM) allows for manufacturing of complex three-dimensional geometries not typically realizable with standard manufacturing practices. The internal microstructure of AM components has a significant impact on mechanical, vibrational, and shock properties and permits richer design space when this is controllable. Due to complex interactions of internal geometry of an extrusion-based AM component, it is common practice to assume homogeneous behavior or to perform characterization testing on specific toolpath configurations. To avoid testing or material waste, it is necessary to develop a consistently accurate numerical simulation framework with relevant boundary value problems that can handle the complicated geometry of internal material microstructure present in AM components. Herein, a framework is proposed to directly create computational meshes suitable for finite element analysis (FEA) of the fine-scale features generated from extrusion-based AM tool paths to maintain a strong process–structure–property-performance linkage. This mesh can be manually or automatically analyzed using standard FEA simulations such as quasi-static preloading or modal analysis. The framework allows an in-silico assessment of a target AM geometry where fine-scale features greatly impact quantities of design interest such as in soft elastomeric lattices where toolpath infill can greatly influence the self-contact of a structure in compression, which we use as a motivating exemplar. This approach greatly reduces both time and resource waste present in traditional build and test design cycles for non-intuitive design spaces, and acts as a tool for use in the production of a key component of a digital twin, a mesh suitable for finite element analysis. In conclusion, it also further allows for the exploration of toolpath infill to optimize component properties beyond simple linear properties such as density and stiffness.

Additive manufacturing↗

DOE OSTI2021

Parametrizations of the spin density matrix

Highlights: • Proposed two methods for parametrizing the SDM of spinning, unstable particles. • All non-negativity conditions fulfilled; adaptability to various constraints. • First method: based on a theorem; applicable in a simple and flexible way. • Second method: particularly suitable for especial conditions. • Applications: two of them interesting in the search for new physics. We propose for the spin density matrix two parametrizations which automatically fulfill the non-negativity conditions, without setting any bound on the parameters. The first one relies on a theorem, that we prove, and it is rather simple and easily adaptable to some specific reactions, where, for example, parity is conserved or angular momentum conservation entails selection rules. Moreover, in the case when the rank is less than the order of the density matrix, we show how to improve the fits to the data, either by implementing previous suggestions, or by elaborating an alternative method, for which we prove a second theorem. Our second parametrization is a variant of previous treatments, it appears suitable for some particular processes. Moreover, we discuss about the possibility of inferring the elements of the density matrix from the differential decay width. Last, we illustrate various examples of current interest, both in strong and weak decays; some of them may be helpful in the investigation of physics beyond the standard model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

A systematic comparison of machine learning methods for modeling of dynamic processes applied to combustion emission rate modeling

Ten established, data-driven dynamic algorithms are surveyed and a practical guide for understanding these methods generated. Existing Python programming packages for implementing each algorithm are acknowledged, and the model equations necessary for prediction are presented. A case study on a coal-fired power plant’s NO x emission rates is performed, directly comparing each modeling method’s performance on a mutual system. Each model is evaluated by its root mean squared error (RMSE) on out-of-sample future horizon predictions. Optimal hyperparameters are identified using either an exhaustive search or genetic algorithm. The top five model structures of each method are used to recursively predict future NO x emission rates over a 60-step time horizon. The RMSE at each future timestep is determined, and the recursive output prediction trends compared against measurements in time. The GRU neural network is identified as the best candidate for representing the system, demonstrating accurate and stable predictions across the future horizon by all considered models, while satisfactory performance was observed in several of the ARX/NARX formulations. Finally, these efforts have contributed 1) a concise resource of multiple proven dynamic machine learning methods, 2) a practical guide explaining the use of these methods, effectively lowering the “barrier-to-entry” of deploying such models in control systems, 3) a comparison study evaluating each method’s performance on a mutual system, 4) demonstration of accurate multi-timestep emissions modeling suitable for systems-level control, and 5) generalizable results demonstrating the suitability of each method for prediction over a multi-step future horizon to other complex dynamic systems.

42 ENGINEERING↗

DOE OSTI2025

Rethinking agrivoltaic incentive programs: A science-based approach to encourage practical design solutions

Agrivoltaic systems are promising solutions to address global food and energy challenges by combining agriculture and solar photovoltaics. However, the lack of appropriate regulations to define and guide their implementation constrains the growth of agrivoltaic systems in the U.S. This study uses a shading and radiation tool to evaluate an existing agrivoltaic incentive program that defines agrivoltaic designs based on shading reduction limits and panel height requirements. Our analysis indicates that structuring policy requirements around shading, and not light availability, may lead to an underestimation of crop suitability by neglecting diffuse radiation. Furthermore, we show that agrivoltaic systems can avoid increasing panel height if policy acknowledges use-case scenarios where farming only occurs between rows. In light of these insights, this study proposes two key policy recommendations: (1) benchmark crop suitability based on daily light integral (DLI) requirements for a shade-intolerant crop selected to represent a prevalent crop in the region, and (2) include an incentive scenario where agriculture is only required between rows. Furthermore, these two recommendations can potentially incentivize designs that are practical and closer in cost to conventional solar farms, thereby accelerating the adoption of cost-effective agrivoltaic systems.

14 SOLAR ENERGY↗