SEARCH · Engineering Papers

Results for “stratiform clouds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Arctic Cloud‐Base Ice Precipitation Properties Retrieved Using Bayesian Inference

Abstract Cloud‐climate feedbacks are still the greatest source of uncertainty in current climate projections. Arctic clouds, which are predominantly stratiform and supercooled, often long‐lived, and nearly continuously precipitate ice particles, contribute roughly 10% of the uncertainty attributed to the global cloud feedback. This Arctic cloud uncertainty is driven by incomplete observational and theoretical knowledge required to estimate and explain the state and active processes occurring in those clouds. A focus on ice precipitation properties at Arctic cloud base rather than the surface deconfounds the product of cloud condensate sink processes from the influence of the atmospheric thermodynamic state below cloud base, rendering cloud‐base properties a more appealing target for inference and evaluation of model simulations. Here I describe an inverse model for the estimation of cloud base ice precipitation properties over Utqiagvik, North Slope of Alaska, using the synthesis of ground‐based radar and lidar measurements. By leveraging a Markov Chain Monte Carlo algorithm as the core of the inverse model, a wide range of particle size distributions are sampled, and different combinations of ice habit models are examined, both of which are typically fixed in other retrieval methods. Results show intriguing links between different cloud base thermodynamic and ice precipitation properties. Apparent ice number concentration enhancements at temperatures of −5 and −15°C suggest possible secondary ice production (SIP). The analysis alludes to an overestimation of SIP occurrence and intensity, especially in studies relying only on radar or lidar measurements. Finally, reflectivity‐dependent ice precipitation rate and ice water content parameterizations are presented.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Arctic Mixed-Phase Cloud Base Ice Precipitation Properties Over the NSA Site

Cloud-climate feedbacks are still the greatest source of uncertainty in current climate projections. Arctic clouds, which are predominantly stratiform and supercooled, often long-lived, and nearly continuously precipitate ice particles, contribute roughly 10% of the uncertainty attributed to the global cloud feedback. This arctic cloud uncertainty is driven by incomplete observational and theoretical knowledge required to estimate and explain the state and active processes occurring in those clouds. A focus on ice precipitation properties at arctic cloud base rather than the surface deconfounds the product of cloud condensate sink processes from the influence of the atmospheric thermodynamic state below cloud base, rendering cloud-base properties a more appealing target for inference and evaluation of model simulations. This data set provides more than 1800 samples of cloud-base ice precipitation properties over Utqiagvik, North Slope of Alaska, all of which were retrieved using the synthesis of ARM radar and lidar measurements. The retrieved ice precipitation variables in this data set include, among others, the ice number concentration, water content, PSD parameters, precipitation rate, mass-weighted fall velocity, vertical air motion, and effective radius, all of which are highly valuable for model evaluation and a general understanding of polar cloud sink processes. Each variable sample includes its mean value and associated uncertainty. Additional variables based on ARM measurements (liquid layer statistics, etc.) are included in this data set. The retrieval algorithm and analysis of this data set are described in Silber (JGR, 2023, https://doi.org/10.1029/2022JD038202).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Arctic Mixed-Phase Cloud Base Ice Precipitation Properties During the M-PACE Field Campaign

Cloud-climate feedbacks are still the greatest source of uncertainty in current climate projections. Arctic clouds, which are predominantly stratiform and supercooled, often long-lived, and nearly-continuously precipitate ice particles, contribute roughly 10% of the uncertainty attributed to the global cloud feedback. This Arctic cloud uncertainty is driven by incomplete observational and theoretical knowledge required to estimate and explain the state and active processes occurring in those clouds. A focus on ice precipitation properties at Arctic cloud base rather than the surface deconfounds the product of cloud condensate sink processes from the influence of the atmospheric thermodynamic state below cloud base, rendering cloud-base properties a more appealing target for inference and evaluation of model simulations. This dataset provides a set of 25 samples from the M-PACE field campaign, all of which were retrieved using the synthesis of ARM radar and lidar measurements. The retrieved ice precipitation variables in this dataset include, among others, the ice number concentration, water content, PSD parameters, precipitation rate, mass-weighted fall velocity, vertical air motion, and effective radius, all of which are highly valuable for model evaluation and a general understanding of polar cloud sink processes. Each variable sample includes its mean value and associated uncertainty. Additional variables based on ARM measurements (liquid layer statistics, etc.) are included in this dataset as well. The retrieval algorithm and analysis of this dataset are described in Silber (JGR, 2023, https://doi.org/10.1029/2022JD038202).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Application of aerosol-ice nucleating particle closure to establish the leading parameters governing ice crystal number concentration under commonly observed mixed-phase cloud conditions

This is the final technical report for DOE DE-SC0021034 award entitled “Application of aerosol-ice nucleating particle closure to establish the leading parameters governing ice crystal number concentration under commonly observed mixed-phase cloud conditions”. The overarching objective of this project was to gain a predictive understanding of the processes that lead from aerosols to ice-nucleating particles (INPs) to ice crystal number concentrations (ICNCs) in stratiform mixed-phase clouds where supercooled water droplets and ice crystals coexist, and to inform climate model parameterizations. During this four-year project we addressed the three main research goals of this objective: 1) Study the aerosol-INP link; 2) Develop an aerosol-cloud column model (AC-1D); and 3) Study the INP-ICNC link. Those activities significantly advanced our predictive understanding of how to represent INPs in could models and its implications on ice crystal number concentrations. The results have been published in five peer-reviewed publications with three more in review and preparation. It allowed for collaboration resulting in additional fourteen peer-reviewed publications that are concerned with the objective of this research project. This research has been communicated to the scientific community at national and international meetings and conferences by numerous talks, seminars, and posters including fifteen invited presentations. This project allowed training of four graduate students and one postdoctoral research associate resulting in one M.S. thesis and advancement to Ph.D. candidacy.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Features of mid- and high-latitude low-level clouds and their relation to strong aerosol effects in the Energy Exascale Earth System Model version 2 (E3SMv2)

The E3SMv2 model, like various other global models that include representations of aerosol–cloud interactions, uses an empirically chosen lower bound on the simulated in-cloud cloud droplet number concentration (CDNC) to help constrain the effective radiative forcing of anthropogenic aerosols, ERFaer. This study identifies where ultra-low CDNCs (i.e., concentrations lower than 10 cm−3) occur in the stratiform and shallow convective clouds simulated by E3SMv2 and which of the occurrences have the strongest impact on ERF aer . Process-level analyses are presented to reveal characteristics of the cloud droplet formation and removal processes associated with impactful ultra-low CDNCs. Simulations performed with present-day emissions show that ultra-low CDNCs are most frequently found over the mid- and high-latitude oceans in both hemispheres, while the occurrences are also frequent in polluted continental regions despite the high aerosol concentrations. Ultra-low CDNCs with the largest impacts on the simulated regional and global mean ERF aer are found in the lower troposphere in the Northern Hemisphere middle and high latitudes. These cases are typically associated with large cloud fractions, strong water vapor condensation, weak turbulence, and lack of cloud droplet nucleation from aerosol activation. Under such atmospheric conditions, boosting aerosol activation and enhancing turbulent mixing of cloud droplet number can increase the simulated CDNCs, although the magnitude of the global mean ERF aer increases undesirably. The reason for this model behavior is discussed. Overall, our study suggests that mid- and high-latitude low-level stratus occurring under weak turbulence is a cloud regime worth further investigating for the purpose of identifying and addressing the root causes of ultra-low CDNCs and strong ERF aer in E3SM.

Aerosol-Cloud Interaction↗

NASA NTRS1976

The identification of cloud types in LANDSAT MSS images

The author has identified the following significant results. Five general families of clouds were identified: cumulonimbiform, cumuliform, stratiform, stratocumuliform, and cirriform. Four members of this five-fold primary division of clouds were further divided into a number of subgroups. The MSS observed and recorded earth radiation in four different wavebands. Two of these bands (4 and 5) image in the visible portion of the electromagnetic spectrum, while the others (6 and 7) image the short wave portion, or just into the infrared. The main differences between the appearances of clouds in the four wavebands are related to the background brightness of land and sea surfaces.

Barrett, E. C.↗

NASA NTRS1995

Microwave and infrared simulations of an intense convective system and comparison with aircraft observations

A three-dimensional cloud model, radiative transfer model-based simulation system is tested and validated against the aircraft-based radiance observations of an intense convective system in southeastern Virginia on 29 June 1986 during the Cooperative Huntsville Meteorological Experiment. NASA's ER-2, a high-altitude research aircraft with a complement of radiometers operating at 11-micrometer infrared channel and 18-, 37-, 92-, and 183-GHz microwave channels provided data for this study. The cloud model successfully simulated the cloud system with regard to aircraft- and radar-observed cloud-top heights and diameters and with regard to radar-observed reflectivity structure. For the simulation time found to correspond best with the aircraft- and radar-observed structure, brightness temperatures T(sub b) are simulated and compared with observations for all the microwave frequencies along with the 11-micrometer infrared channel. Radiance calculations at the various frequencies correspond well with the aircraft observations in the areas of deep convection. The clustering of 37-147-GHz T(sub b) observations and the isolation of the 18-GHz values over the convective cores are well simulated by the model. The radiative transfer model, in general, is able to simulate the observations reasonably well from 18 GHz through 174 GHz within all convective areas of the cloud system. When the aircraft-observed 18- and 37-GHz, and 90- and 174-GHz T(sub b) are plotted against each other, the relationships have a gradual difference in the slope due to the differences in the ice particle size in the convective and more stratiform areas of the cloud. The model is able to capture these differences observed by the aircraft. Brightness temperature-rain rate relationships compare reasonably well with the aircraft observations in terms of the slope of the relationship. The model calculations are also extended to select high-frequency channels at 220, 340, and 400 GHz to simulate the Millimeter-wave Imaging Radiometer aircraft instrument to be flown in the near future. All three of these frequencies are able to discriminate the convective and anvil portions of the system, providing useful information similar to that from the frequencies below 183 GHz but with potentially enhanced spatial resolution from a satellite platform. In thin clouds, the dominant effect of water vapor is seen at 174, 340, and 400 GHz. In thick cloudy areas, the scattering effect is dominant at 90 and 220 GHz, while the overlaying water vapor can attenuate at 174, 340, and 400 GHz. All frequencies (90-400 GHz) show strong signatures in the core.

Prasad, N.↗

DOE OSTI2022

Three-Dimensional Convective–Stratiform Echo-Type Classification and Convectivity Retrieval from Radar Reflectivity

The Echo Classification from COnvectivity (ECCO) algorithm identifies convective and stratiform types of radar echo in three dimensions. It is based on the calculation of reflectivity texture—a combination of the intensity and the heterogeneity of the radar echoes on each horizontal plane in a 3D Cartesian volume. Reflectivity texture is translated into convectivity, which is designed to be a quantitative measure of the convective nature of each 3D radar grid point. It ranges from 0 (100% stratiform) to 1 (100% convective). By thresholding convectivity, a more traditional qualitative categorization is obtained, which classifies radar echoes as convective, mixed, or stratiform. In contrast to previous algorithms, these echo-type classifications are provided on the full 3D grid of the reflectivity field. The vertically resolved classifications, in combination with temperature data, allow for subclassifications into shallow, mid-, deep, and elevated convective features, and low, mid-, and high stratiform regions—again in three dimensions. The algorithm was validated using datasets collected over the U.S. Great Plains during the PECAN field campaign. An analysis of lightning counts shows ~90% of lightning occurring in regions classified as convective by ECCO. A statistical comparison of ECCO echo types with the well-established GPM radar precipitation-type categories show 84% (88%) of GPM stratiform (convective) echo being classified as stratiform (convective) or mixed by ECCO. ECCO was applied to radar grids for the continental United States, the United Arab Emirates, Australia, and Europe, illustrating its robustness and adaptability to different radar grid characteristics and climatic regions.

Radars/Radar observations↗

DOE OSTI2020

Use of Remote Sensing and In-Situ Observations to Develop and Evaluate Improved Representations of Convection and Clouds for the ACME Model

The overachieving goal of the whole CMDV-MCS project is to improve understanding of warm season continental convection and to develop treatments of convection and microphysics capable of representing mesoscale convective systems (MCSs) features in large-scale models. Our tasks for this project contributing to the overachieving goal include: (1) Improve the ice nucleation formulation for MG2 and P3 cloud microphysics schemes; (2) Improve the treatment of subgrid dynamics and thermodynamics driving the ice nucleation in E3SM; and (3) Test the performance of improved ice microphysics in E3SM with observation data. In this project, we have (1) Improved the ice nucleation parameterization for MG2 and P3 in E3SM by implementing two advanced empirical parameterizations with connection to aerosols. The two deterministic heterogeneous ice nucleation parameterizations (i.e., DeMott et al., 2015; Niemand et al., 2012) were merged with the MG2 and P3 cloud microphysics schemes in E3SM. Long-term simulations were conducted to examine the impacts of these new parameterizations on simulated cloud properties; (2) Improved the treatment of subgrid dynamics and thermodynamics driving the ice nucleation in E3SM. We evaluated the double Gaussian PDF of vertical velocity simulated by the Cloud Layers Unified By Binormals (CLUBB) and the sub-column vertical velocity sampled from the Subgrid Importance Latin Hypercube Sampler (SILHS) in E3SM. We introduced the vertical velocity variance induced by topographic gravity waves for ice nucleation and droplet activation; and (3) Tested the performance of improved ice microphysics in E3SM with observation data. We tested the new treatments of ice nucleation in the single column model (SCM) mode for the stratiform mixed-phase clouds observed during 9-10 October 2004 in the DOE ARM Mixed-Phase Arctic Cloud Experiment (M-PACE) and for the convective clouds observed on 20 May 2011 in the Midlatitude Continental Convective Clouds Experiment (MC3E). Modeled ice nucleating particles (INPs) concentrations were compared against observations collected around the globe.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Sunlight-absorbing aerosol amplifies the seasonal cycle in low-cloud fraction over the southeast Atlantic

Abstract. The mean altitude of the smoke loading over the southeast Atlantic moves from the boundary layer in July to the free troposphere by October. This study details the month-by-month changes in cloud properties and the large-scale environment as a function of the biomass burning aerosol loading at Ascension Island (8∘ S, 14.5∘ W) from July to October, based on island measurements, satellite retrievals, and reanalysis. In July and August, the smoke loading predominantly varies within the boundary layer. During both months, the low-cloud fraction is less and is increasingly cumuliform when more smoke is present, with the exception of a late morning boundary layer deepening that encourages a short-lived cloud development. The meteorology varies little, suggesting aerosol–cloud interactions explain the cloudiness changes. September marks a transition month during which midlatitude disturbances can intrude into the Atlantic subtropics, constraining the free tropospheric aerosol closer to the African coast. Stronger boundary layer winds on cleaner days help deepen, dry, and cool much of the marine boundary layer compared to that on days with high smoke loadings, with stratocumulus reducing everywhere but at the northern deck edge. The September free troposphere is better mixed on smoky days compared to October. Longwave cooling rates, generated by a sharp water vapor gradient at the aerosol layer top, encourage a small-scale vertical mixing that could help maintain the well-mixed smoky September free troposphere. The October meteorology primarily varies as a function of the strength of the free tropospheric winds advecting aerosol offshore. The free tropospheric aerosol loading is less than in September, and the moisture variability is greater. Low-level clouds increase and are more stratiform in October when the smoke loadings are higher. The increased free tropospheric moisture can help sustain the clouds through a reduction in evaporative drying during cloud-top entrainment. Enhanced subsidence above the coastal upwelling region, increasing cloud droplet number concentrations, may further prolong cloud lifetime through microphysical interactions. Reduced subsidence underneath stronger free tropospheric winds at Ascension Island supports slightly higher cloud tops during smokier conditions. Overall, the monthly changes in the large-scale aerosol and moisture vertical structure act to amplify the seasonal cycle in low-cloud amount and morphology. This is climatically important, as cloudiness changes dominate changes in the top-of-atmosphere radiation budget.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2015

RACORO Continental Boundary Layer Cloud Investigations: 1. Case Study Development and Ensemble Large-Scale Forcings

Observation-based modeling case studies of continental boundary layer clouds have been developed to study cloudy boundary layers, aerosol influences upon them, and their representation in cloud- and global-scale models. Three 60 h case study periods span the temporal evolution of cumulus, stratiform, and drizzling boundary layer cloud systems, representing mixed and transitional states rather than idealized or canonical cases. Based on in situ measurements from the Routine AAF (Atmospheric Radiation Measurement (ARM) Aerial Facility) CLOWD (Clouds with Low Optical Water Depth) Optical Radiative Observations (RACORO) field campaign and remote sensing observations, the cases are designed with a modular configuration to simplify use in large-eddy simulations (LES) and single-column models. Aircraft measurements of aerosol number size distribution are fit to lognormal functions for concise representation in models. Values of the aerosol hygroscopicity parameter, kappa, are derived from observations to be approximately 0.10, which are lower than the 0.3 typical over continents and suggestive of a large aerosol organic fraction. Ensemble large-scale forcing data sets are derived from the ARM variational analysis, European Centre for Medium-Range Weather Forecasts, and a multiscale data assimilation system. The forcings are assessed through comparison of measured bulk atmospheric and cloud properties to those computed in "trial" large-eddy simulations, where more efficient run times are enabled through modest reductions in grid resolution and domain size compared to the full-sized LES grid. Simulations capture many of the general features observed, but the state-of-the-art forcings were limited at representing details of cloud onset, and tight gradients and high-resolution transients of importance. Methods for improving the initial conditions and forcings are discussed. The cases developed are available to the general modeling community for studying continental boundary clouds.

Boundary layers↗

DOE OSTI2023

Making a Superbolt: Reconciling Observations of the Optically Brightest Lightning on Earth From Different Satellites

We previously documented geographic distributions of the optically brightest lightning on Earth—known as “superbolts”—using two space-based instruments: the photodiode detector (PDD) on the Fast On-orbit Recording of Transient Events (FORTE) satellite and the Geostationary Lightning Mapper (GLM) on NOAA's Geostationary Operational Environmental Satellites. In this study, we further examine the superbolts identified by the PDD and GLM to reconcile the differences between their geographic distributions. We find that both the physical extent of the parent flash and the development speed of its leaders are important for making a superbolt. The oceanic PDD superbolts tend to occur early in flashes that rapidly expand laterally into long horizontal “megaflashes.” The top GLM superbolts occur over land at later times in particularly large megaflashes. These land-based flashes grow more slowly until they extend over multiple hundreds of kilometers. The FORTE PDD missed these delayed superbolts due to limitations in its triggering. Coincident Tropical Rainfall Measuring Mission measurements show that the warm season megaflash superbolts detected by Lightning Imaging Sensor/GLM and wintertime oceanic superbolts observed by the PDD occur in otherwise similar thunderstorm environments. Both are marked by: low storm heights (<10 km), widespread precipitation near the surface, small infrared brightness temperature gradients, and low flash rates. We suggest that the vertically compact, stratiform nature of these clouds provides favorable conditions for superbolt production.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2015

A-Train Based Observational Metrics for Model Evaluation in Extratropical Cyclones

Extratropical cyclones contribute most of the precipitation in the midlatitudes, i.e. up to 70 during winter in the northern hemisphere, and can generate flooding, extreme winds, blizzards and have large socio-economic impacts. As such, it is important that general circulation models (GCMs) accurately represent these systems so their evolution in a warming climate can be understood. However, there are still uncertainties on whether warming will increase their frequency of occurrence, their intensity and how much rain or snow they bring. Part of the issue is that models have trouble representing their strength, but models also have biases in the amount of clouds and precipitation they produce. This is caused by potential issues in various aspects of the models: convection, boundary layer, and cloud scheme to only mention a few. In order to pinpoint which aspects of the models need improvement for a better representation of extratropical cyclone precipitation and cloudiness, we will present A-train based observational metrics: cyclone-centered, warm and cold frontal composites of cloud amount and type, precipitation rate and frequency of occurrence. Using the same method to extract similar fields from the model, we will present an evaluation of the GISS-ModelE2 and the IPSL-LMDZ-5B models, based on their AR5 and more recent versions. The AR5 version of the GISS model underestimates cloud cover in extratropical cyclones while the IPSL AR5 version overestimates it. In addition, we will show how the observed CloudSat-CALIPSO cloud vertical distribution across cold fronts changes with moisture amount and cyclone strength, and test if the two models successfully represent these changes. We will also show how CloudSat-CALIPSO derived cloud type (i.e. convective vs. stratiform) evolves across warm fronts as cyclones age, and again how this is represented in the models. Our third process-based analysis concerns cumulus clouds in the post-cold frontal region and how their amount relates to the stability of the boundary layer. This test uses Aqua cloud and vertical atmospheric profiles and when applied to the model output can help assess the accuracy of the convection, boundary layer and cloud scheme.

Convection clouds↗

NASA NTRS2010

Relating Convective and Stratiform Rain to Latent Heating

The relationship among surface rainfall, its intensity, and its associated stratiform amount is established by examining observed precipitation data from the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR). The results show that for moderate-high stratiform fractions, rain probabilities are strongly skewed toward light rain intensities. For convective-type rain, the peak probability of occurrence shifts to higher intensities but is still significantly skewed toward weaker rain rates. The main differences between the distributions for oceanic and continental rain are for heavily convective rain. The peak occurrence, as well as the tail of the distribution containing the extreme events, is shifted to higher intensities for continental rain. For rainy areas sampled at 0.58 horizontal resolution, the occurrence of conditional rain rates over 100 mm/day is significantly higher over land. Distributions of rain intensity versus stratiform fraction for simulated precipitation data obtained from cloud-resolving model (CRM) simulations are quite similar to those from the satellite, providing a basis for mapping simulated cloud quantities to the satellite observations. An improved convective-stratiform heating (CSH) algorithm is developed based on two sources of information: gridded rainfall quantities (i.e., the conditional intensity and the stratiform fraction) observed from the TRMM PR and synthetic cloud process data (i.e., latent heating, eddy heat flux convergence, and radiative heating/cooling) obtained from CRM simulations of convective cloud systems. The new CSH algorithm-derived heating has a noticeably different heating structure over both ocean and land regions compared to the previous CSH algorithm. Major differences between the new and old algorithms include a significant increase in the amount of low- and midlevel heating, a downward emphasis in the level of maximum cloud heating by about 1 km, and a larger variance between land and ocean in the new CSH algorithm.

Tao, Wei-Kuo↗

NASA NTRS1984

Reflected solar radiances from broken cloud scenes and the interpretation of scanner measurements

If an adequate model of the reflection characteristics of a given scene is available, the reflected solar irradiance from the scene may be determined from radiance measurements made by satellite-borne scanning radiometers. A theoretical analysis of the reflection functions of broken cloud scenes is presented, using Monte Carlo simulations of the radiative transfer in various three-dimensional geometries. It is shown that the reflection functions of horizontally extensive (stratiform) and horizontally limited (cumuliform) clouds are generally quite different. The differences are greatest for nadir and limb views, but tend to vanish for reflected radiances with a zenith angle of 60 deg. Applications to satellite observations suggest potential errors of a factor of 2 in the inferred irradiance are likely due to scene misidentification when the radiances are interpreted indiscriminantly. Selection of preferred satellite viewing directions, however, can significantly reduce this error.

Davies, R.↗

NASA NTRSDate not supplied

Exploring the Continuum of Stratiform and Cumulus Cloudiness: Observational Insights Related to Marine Boundary Layer Clouds

Low-level marine clouds take on a wide range of morphological states owing to external forcing and internal feedbacks. Rarely are shallow marine clouds adequately described by a single simplified framework but instead exhibit features that partially conform to several states that could be considered “limiting”. Perhaps the most apparent dichotomy is whether to consider shallow clouds as existing within a surface-driven mixed layer or as convective “plume” elements positioned on top. Do the rules that govern the limiting cases transition smoothly through the hybrid scenarios found in nature, or are there particular regions of attraction or repulsion?We have identified 3 ”axes” along which to investigate how the energetics, thermodynamics and cloud macro structure relate to the intermediate spaces between idealizations.

Ewan Crosbie↗

NASA NTRS2016

Observations of Stratiform Lightning Flashes and Their Microphysical and Kinematic Environments

During the Midlatitude Continental Convective Clouds Experiment (MC3E), combined observations of clouds and precipitation were made from airborne and ground-based in situ and remote sensing platforms. These observations were coordinated for multiple mesoscale convective systems (MCSs) that passed over the MC3E domain in northern Oklahoma. Notably, during a storm on 20 May 2011 in situ and remote sensing airborne observations were made near the times and locations of stratiform positive cloud-to-ground (+CG) lightning flashes. These +CGs resulted from extremely large stratiform lightning flashes that were hundreds of km in length and lasted several seconds. This dataset provides an unprecedented look at kinematic and microphysical environments in the vicinity of large, powerful, and long-lived stratiform lightning flashes. We will use this dataset to understand the influence of low liquid water contents (LWCs) in the electrical charging of MCS stratiform regions.

Lightning↗

NASA NTRS2017

Observations of Stratiform Lightning Flashes and Their Microphysical and Kinematic Environments

Lightning↗