Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Error-correcting codes for fermionic quantum simulation

Utilizing the framework of \mathbb{Z}_2 ℤ 2 lattice gauge theories in the context of Pauli stabilizer codes, we present methodologies for simulating fermions via qubit systems on a two-dimensional square lattice. We investigate the symplectic automorphisms of the Pauli module over the Laurent polynomial ring. This enables us to systematically increase the code distances of stabilizer codes while fixing the rate between encoded logical fermions and physical qubits. We identify a family of stabilizer codes suitable for fermion simulation, achieving code distances of d=2,3,4,5,6,7, allowing correction of any \lfloor \frac{d-1}{2} \rfloor ⌊ d − 1 2 ⌋ -qubit error. In contrast to the traditional code concatenation approach, our method can increase the code distances without decreasing the (fermionic) code rate. In particular, we explicitly show all stabilizers and logical operators for codes with code distances of d=3,4,5. We provide syndromes for all Pauli errors and invent a syndrome-matching algorithm to compute code distances numerically.

Physics↗
DOE OSTI2020

Phonon dispersion throughout the iron spin crossover in ferropericlase

Ferropericlase (Fp), (Mg 1– x Fex)O, is the second most abundant phase in the Earth's lower mantle. At relevant pressure-temperature conditions, iron in Fp undergoes a high spin (HS), $\textit{S}$ = 2, to low spin (LS), $\textit{S}$ = 0, state change. The nature of this phenomenon is quite well understood now, but there are still basic questions regarding the structural stability and the existence of soft phonon modes during this iron state change. General theories exist to explain the volume reduction, the significant thermoelastic anomalies, and the broad nature of this HS-LS crossover. These theories make extensive use of the quasiharmonic approximation. Therefore, dynamical and structural stability is essential to their validity. Here, we investigate the vibrational spectrum of Fp throughout this spin crossover using ab initio density-functional theory $+U_{sc}$ calculations. We address vibrational modes associated with isolated and (second-)nearest-neighbor iron ions undergoing the HS-LS state change. As expected, acoustic modes of this solid solution are resilient, while optical modes are the most affected. In this work, we show that there are no soft phonon modes across this HS-LS crossover, and Fp is dynamically stable at all relevant pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Atomic-Level Understanding of Surface Reconstruction Based on Li[Ni x Mn y Co 1–x–y ]O 2 Single-Crystal Studies

The stability of cathode particle surfaces that are directly exposed to the electrolyte is one of the most crucial and determining factors for cathode performance at high operating voltages. Theory has predicted a strong dependence of surface stability on chemical compositions as well as surface facets of layered oxides, yet conflicting results on the correlations exist as most experimental studies focus on cycled secondary particles recovered from composite electrodes. Here, we synthesize well-formed Li[Ni x Mn y Co 1–x–y ]O 2 (NMC) single-crystal samples, carefully define pristine surface properties, and then monitor their evolution with cycling. Atomic-resolution scanning transmission electron microscopy (STEM) imaging and electron energy loss spectroscopy (EELS) analysis show the formation of a surface reconstruction layer (SRL) as well as an extended surface reduction layer on pristine, Li-permeable non-(001) surfaces, even before cycling. We reveal a transition region with chemical gradient, in which the layered structure gradually densifies and eventually transforms into the SRL on the top surface. Contrary to these observations, no SRL is observed on pristine, Li-impermeable (001) surfaces, revealing the facet-dependent nature of surface reconstructions during particle synthesis. Upon electrochemical cycling, significant composition-and facet-dependent SRL growth is observed. The driving force and mechanism for surface reconstruction are further discussed. The present study provides insights into the origin as well as the nature of SRLs, highlighting the significance of surface engineering in cathode material optimization.

25 ENERGY STORAGE↗
DOE OSTI2025

Computational Design of Cost-Effective High-Entropy Thermal/Environmental Barrier Coatings

Developing cost-effective thermal/environmental barrier coatings (TEBC) requires balance among various properties including low thermal conductivity, matching coefficient of thermal expansion (CTE), high thermal stability, high fracture toughness, and high recession resistance while being affordable. Low oxygen diffusivity is desirable as it can slow down oxygen transport to reach the underlying bond coating and hence delay oxidation of the bond coating. This project aims to design low-cost high-performance TEBC based on high entropy rare earth disilicates to protect SiC-based ceramic matrix composites from chemical and thermal attack for better performance of components in the hot section of gas turbine engines. To accelerate the TEBC design, we utilize first-principles density functional theory to predict key properties including phase stability, CTE, lattice thermal conductivity, temperature-dependent elastic constants, and oxygen diffusivity. Alloying elements including Yb, Y, Er, Eu, Gd, Lu, La, and Ce are considered, and modeling prediction are compared with available experimental results.

coefficient of thermal expansion↗
DOE OSTI2022

High critical field superconductivity at ambient pressure in MoB 2 stabilized in the P6/mmm structure via Nb substitution

Recently it was discovered that, under elevated pressures, MoB 2 exhibits superconductivity at a critical temperature T c as high as 32 K. The superconductivity appears to develop following a pressure-induced structural transition from the ambient pressure $\text{R}\bar{3}$⁢m structure to an MgB 2 -like P6/mmm structure. This suggests that remarkably high T c values among diborides are not restricted to MgB 2 as previously appeared to be the case, and that similarly high T c values may occur in other diborides if they can be coerced into the MgB 2 structure. In this paper, we show that density functional theory calculations indicate that phonon free energy stabilizes the P6/mmm structure over the $\text{R}\bar{3}$⁢m at high temperatures across the Nb 1–x ⁢Mo x B 2 series. X-ray diffraction confirms that the synthesized Nb-substituted MoB 2 adopts the MgB 2 crystal structure. Finally, high magnetic field electrical resistivity measurements and specific heat measurements demonstrate that Nb x ⁢Mo 1–x⁢ B 2 exhibits superconductivity with T c as high as 8 K and critical fields approaching 6 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

On the Stochastic Stability of Deep Markov Models

Deep Markov models (DMM) are generative models which are scalable and expressive generalization of Markov models for representation, learning, and inference problems. However, the fundamental stochastic stability guarantees of such models have not been thoroughly investigated. In this paper, we present a novel stability analysis method and provide sufficient conditions of DMM's stochastic stability. The proposed stability analysis is based on the contraction of probabilistic maps modeled by deep neural networks. We make connections between the spectral properties of neural network's weights and different types of used activation function on the stability and overall dynamic behavior of DMMs with Gaussian distributions. Based on the theory, we propose a few practical methods for designing constrained DMMs with guaranteed stability. We empirically substantiate our theoretical results via intuitive numerical experiments using the proposed stability constraints.

Drgona, Jan↗
DOE OSTI2020

Heterotic instantons for monad and extension bundles

We consider non-perturbative superpotentials from world-sheet instantons wrapped on holomorphic genus zero curves in heterotic string theory. These superpotential contributions feature prominently in moduli stabilization and large field axion inflation, which makes their presence or absence, as well as their functional dependence on moduli, an important issue. We develop geometric methods to compute the instanton superpotentials for heterotic string theory with monad and extension bundles. Using our methods, we find a variety of examples with a non-vanishing superpotential. In view of standard vanishing theorems, we speculate that these results are likely to be attributed to the non-compactness of the instanton moduli space. We test this proposal, for the case of monad bundles, by considering gauged linear sigma models where compactness of the instanton moduli space can be explicitly checked. In all such cases, we find that the geometric results are consistent with the vanishing theorems. Surprisingly, linearly dependent Pfaffians even arise for cases with a non-compact instanton moduli space. This suggests some gauged linear sigma models with a non-compact instanton moduli space may still have a vanishing instanton superpotential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Stability of PT and anti- PT -symmetric Hamiltonians with multiple harmonics

Hermitian Hamiltonians with time-periodic coefficients can be analyzed via Floquet theory, and have been extensively used for engineering Floquet Hamiltonians in standard quantum simulators. Generalized to non-Hermitian Hamiltonians, time periodicity offers avenues to engineer the landscape of Floquet quasienergies across the complex plane. We investigate two-level non-Hermitian PT and anti- PT -symmetric Hamiltonians with coefficients that have multiple harmonics using Floquet theory. By analytical and numerical calculations, we obtain their regions of stability, defined by real Floquet quasienergies, and contours of exceptional point (EP) degeneracies. We extend our analysis to study the phases that accompany these cyclic changes with the biorthogonality approach. Our results demonstrate that these time-periodic Hamiltonians generate a rich landscape of stable (real) and unstable (complex) regions. Published by the American Physical Society 2024

Cen, Julia (ORCID:0000000299353943)↗
DOE OSTI2025

Low-iridium stabilized ruthenium oxide anode catalyst for durable proton-exchange membrane water electrolysis

While mixing iridium (Ir) with ruthenium oxide (RuO 2 ) has proven to be an effective strategy for reducing Ir loading in anode catalysts for proton-exchange membrane (PEM) water electrolysers, achieving industrially relevant long-term stability typically requires an Ir-rich, Ru-lean combination. Here, in this study, by combining density functional theory with Metropolis Monte Carlo methods, we discovered that sufficient stabilization in the RuO 2 lattice could be achieved with less than 50 at.% of Ir, and that Ir in the first subsurface layer plays a critical role. By effectively dispersing Ir dopants within the RuO 2 lattice, we demonstrated an Ir:Ru atomic ratio of only 1:6 that exhibited exceptional stability for over 1,500 h of continuous water electrolysis at 2 A cm −2 . Our Ru 6 IrO x catalyst has the potential to reduce Ir loading by 80% compared with current commercial PEM water electrolysers, and its stability was further validated under industrial testing conditions in a 25-cm 2 PEM electrolyser.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Equation of state for Hf, Ta, W, Re, Os, Ir, Pt, and Au to multi-terapascal pressures from density-functional theory

We present the zero-temperature equation of state (pressure dependence of compression) and phase stability predictions for the 5d-transition metals obtained from all-electron density-functional theory (DFT) calculations. The results compare favorably with experiments but extend beyond current experimental capabilities to 10 TPa. Our study reveals phase changes that are explained from the calculated electronic structure. The cubic face-centered and body-centered structures (fcc and bcc), together with two-, three-, and four-layered hexagonal structures, play major roles under compression. The results’ dependence on the electron exchange and correlation in the DFT approach is investigated, and it is shown that the impact of the choice, while significant at lower pressures, diminishes in the terapascal regime. We further illustrate that the normal parabolic trends in atomic volume and bulk modulus with atomic number, due to the occupation of bonding and anti-bonding 5d states, break down at TPa pressures, suggesting drastically different chemical bonding at these extreme conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Charge Compensation by Iodine Covalent Bonding in Lead Iodide Perovskite Materials

Metal halide perovskite materials (MHPs) are a family of next-generation semiconductors that are enabling low-cost, high-performance solar cells and optoelectronic devices. The most-used halogen in MHPs, iodine, can supplement its octet by covalent bonding resulting in atomic charges intermediate to I− and I0. Here, we examine theoretically stabilized defects of iodine using density functional theory (DFT); defect formation enthalpies and iodine Bader charges which illustrate how MHPs adapt to stoichiometry changes. Experimentally, X-ray photoelectron spectroscopy (XPS) is used to identify perovskite defects and their relative binding energies, and validate the predicted chemical environments of iodine defects. Examining MHP samples with excess iodine compared with near stoichiometric samples, we discern additional spectral intensity in the I 3d5/2 XPS data arising from defects, and support the presence of iodine trimers. I 3d5/2 defect peak areas reveal a ratio of 2:1, matching the number of atoms at the ends and middle of the trimer, whereas their binding energies agree with calculated Bader charges. Results suggest the iodine trimer is the preferred structural motif for incorporation of excess iodine into the perovskite lattice. Understanding these easily formed photoactive defects and how to identify their presence is essential for stabilizing MHPs against photodecomposition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanistic Investigation of Molybdenum Disulfide Defect Photoluminescence Quenching by Adsorbed Metallophthalocyanines

Lattice defects play an important role in determining the optical and electrical properties of monolayer semiconductors such as MoS 2 . Although the structures of various defects in monolayer MoS 2 are well studied, little is known about the nature of the fluorescent defect species and their interaction with molecular adsorbates. In this study, the quenching of the low-temperature defect photoluminescence (PL) in MoS 2 is investigated following the deposition of metallophthalocyanines (MPcs). The quenching is found to significantly depend on the identity of the phthalocyanine metal, with the quenching efficiency decreasing in the order CoPc > CuPc > ZnPc, and almost no quenching by metal-free H 2 Pc is observed. Futher, time-correlated single photon counting (TCSPC) measurements corroborate the observed trend, indicating a decrease in the defect PL lifetime upon MPc adsorption, and the gate voltage-dependent PL reveals the suppression of the defect emission even at large Fermi level shifts. Density functional theory modeling argues that the MPc complexes stabilize dark negatively charged defects over luminescent neutral defects through an electrostatic local gating effect. These results demonstrate the control of defectbased excited-state decay pathways via molecular electronic structure tuning, which has broad implications for the design of mixeddimensional optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reining in Radium for Nuclear Medicine: Extra-Large Chelator Development for an Extra-Large Ion

Targeted α therapy (TAT) of soft-tissue cancers using the α particle-emitting radionuclide 223 Ra holds great potential because of its favorable nuclear properties, adequate availability, and established clinical use for treating metastatic prostate cancer of the bone. Despite these advantages, the use of 223 Ra has been largely overshadowed by other α emitters due to its challenging chelation chemistry. A key criterion that needs to be met for a radionuclide to be used in TAT is its stable attachment to a targeting vector via a bifunctional chelator. The low charge density of Ra 2+ arising from its large ionic radius weakens its electrostatic binding interactions with chelators, leading to insufficient complex stability in vivo. In this study, we synthesized and evaluated macropa-XL as a novel chelator for 223 Ra. It bears a large 21-crown-7 macrocyclic core and two picolinate pendent groups, which we hypothesized would effectively saturate the large coordination sphere of the Ra 2+ ion. The structural chemistry of macropa-XL was first established with the nonradioactive Ba 2+ ion using X-ray diffraction and X-ray absorption spectroscopy, which revealed the formation of an 11-coordinate complex in a rare anti pendent-arm configuration. Subsequently, the stability constant of the [Ra(macropa-XL)] complex was determined via competitive cation exchange with 223 Ra and 224 Ra radiotracers and compared with that of macropa, the current state-of-the-art chelator for Ra 2+ . A moderate log K ML value of 8.12 was measured for [Ra(macropa-XL)], which is approximately 1.5 log K units lower than the stability constant of [Ra(macropa)]. This relative decrease in Ra 2+ complex stability for macropa-XL versus macropa was further probed using density functional theory calculations. Additionally, macropa-XL was radiolabeled with 223 Ra, and the kinetic stability of the resulting complex was evaluated in human serum. Furthermore, although macropa-XL could effectively bind 223 Ra under mild conditions, the complex appeared to be unstable to transchelation. Collectively, this study sheds additional light on the chelation chemistry of the exotic Ra 2+ ion and contributes to the small, but growing, number of chelator development efforts for 223 Ra-based TAT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring the Coexistence of Spin States in [Fe(tpy-Ph) 2 ] 2+ Complexes on Au(111) Using DFT Calculations

In this work, we systematically study the electronic structure and stability of spin states of the [Fe-(tpy-ph) 2 ] 2+ molecule in both the gas phase and on a Au(111) substrate using density functional theory + U (DFT+ U ) calculations. We find that the stability of the Fe 2+ ion’s spin states predicted by the computations is significantly influenced by the Hubbard U parameter. In the gas phase, the low-spin (LS, S = 0) state is found to be energetically favorable for U (Fe) ≤ 3 eV, whereas the high-spin (HS, S = 2) state is stabilized for U (Fe) > 3 eV. Interaction with the Au(111) substrate is found to elevate the critical U for the spin-state transition to 3.5 eV. Additionally, we perform L-edge X-ray absorption spectroscopy (XAS) calculations for both HS and LS states. The calculated XAS suggests that the HS state more closely aligns with the experimental observations, indicating the potential coexistence of the HS state as the initial state during the X-ray excitation process. These findings enrich our understanding of spin-state dynamics in [Fe(tpy-Ph) 2 ] 2+ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hamiltonian formulations for perturbed dissipationless plasma equations

The Hamiltonian formulations for the perturbed Vlasov–Maxwell equations and the perturbed ideal magnetohydrodynamics (MHD) equations are expressed in terms of the perturbation derivative ∂ F / ∂ ϵ ≡ [ F , S ] of an arbitrary functional F [ ψ ] of the Vlasov–Maxwell fields ψ = ( f , E , B ) or the ideal MHD fields ψ = ( ρ , u , s , B ) , which are assumed to depend continuously on the (dimensionless) perturbation parameter ϵ . In this study, [ , ] denotes the functional Poisson bracket for each set of plasma equations and the perturbation action functional S is said to generate dynamically accessible perturbations of the plasma fields. The new Hamiltonian perturbation formulation introduces a framework for functional perturbation methods in plasma physics and highlights the crucial roles played by polarization and magnetization in Vlasov–Maxwell and ideal MHD perturbation theories. One application considered in this paper is a formulation of plasma stability that guarantees dynamical accessibility and leads to a natural generalization to higher-order perturbation theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

First-Principles Examination of Multiple Criteria of Organic Solvent Oxidative Stability in Batteries

Oxidative instability of the liquid electrolyte at or near battery cathode oxide surfaces has significant detrimental effects on batteries. Organic solvent molecules are often the fuel and precursors of such degradation processes, releasing electrons and protons that react with cathode oxides and electrolyte anions. These reactions contribute to cathode–electrolyte interphase (CEI) film formation, transition-metal ion dissolution, and phase transformation of the surface regions of the cathode. Here we apply density functional theory calculations to examine four criteria of oxidative stability (oxidation potential, hydrogen removal energies, and initial reactivity on two types of oxide facets) using four different solvent/additive molecules (ethylene carbonate, fluoroethylene carbonate, 1,3-dioxolane, and dimethyl ether). The ranking of molecular stability differs with each criterion. Surprisingly, the all-oxygen-terminated basal planes of layered oxides exhibit lower reaction barriers than spinel surface facets with exposed transition-metal cations, especially for ether solvents; the calculations also suggest basal planes contribute to the dissolution of transition-metal ions. Further, the structure–degradation relation complexity underscores the challenge of understanding the function of the CEI but also offers a guide to future degradation-mitigation strategies including facet engineering. Our predictions and models help establish a framework for future studies relevant to high-voltage conditions.

25 ENERGY STORAGE↗
DOE OSTI2023

Effect of the Nature of Both Cation and Anion Substitution on the Structural Symmetry of Li‐Rich 3 d ‐Metal Chalcogenide Electrodes

Abstract Li‐rich layered chalcogenides have recently led to better understanding of the anionic redox process and its associated high capacity while providing ways to overcome its practical limitations of voltage fade and irreversibility. This study reports on the feasibility of triggering anionic activity in Li 2 TiS 3 , through anionic substitution (Se for S) or cationic substitution (Fe for Ti). Herein, the chalcogenide chemical space is further explored to prepare mono‐substituted Li 1.7 Ti 0.85 Mn 0.45 Ch 3 (Ch = S/Se) and doubly substituted cationic and anionic phases (Li 1.7 Ti 0.85 Fe 0.45 S 3‐z Se z ) which crystallize either in the O3‐ or O1‐type structures depending upon substituents. All series show a bell‐shape capacity variation as function of the transition metal (TM) substitution degree with values up to 240 mAh g −1 . For specific compositions, a structural O3 to O1 phase transition is observed upon Li removal, which is not reversible upon Li re‐insertion due to kinetic limitations and negatively affects long‐term cycling performance. Density functional theory (DFT) calculations confirm the O3/O1 relative stability along the different series and point subtle electronic differences in the TM‐doping, rationalizing the structural and electrochemical behaviors of these phases upon cycling. These findings provide further insights into the link between structural and electronic stability, which is of key importance for designing chalcogenide‐based anionic redox compounds.

Chemistry↗