Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “specific correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Gadolinium-hydrogen ion exchange of zirconium phosphate

The Gd(+3)/H(+) ion exchange on a commercial zirconium phosphate ion exchanger was investigated in chloride, sulfate, and phosphate solutions of Gd(+3) at gadolinium concentrations of 0.001 to 1 millimole per cc and in the pH range of 0 to 3.5. Relatively low Gd(+3) capacities, in the range of 0.01 to 0.1 millimole per g of ion exchanger were found at room temperature. A significant difference in Gd(+3) sorption was observed, depending on whether the ion exchanger was converted from initial conditions of greater or lesser Gd(+3) sorption than the specific final conditions. Correlations were found between decrease in Gd(+3) capacity and loss of exchanger phosphate groups due to hydrolysis during washing and between increase in capacity and treatment with H3PO4. Fitting of the experimental data to ideal ion exchange equilibrium expressions indicated that each Gd(+3) ion is sorbed on only one site of the ion exchanger. The selectivity quotient was determined to be 2.5 + or - 0.4 at room temperature on gadolinium desorption in chloride solutions.

Liu, D. C.↗

The production rate of Al/26/ from target elements in the Bruderheim chondrite.

A specimen of the Bruderheim chondrite was subjected to magnetic and heavy-liquid mineral separation procedures, resulting in a number of chemically distinct samples. These samples were analyzed for cosmogenic Al(26) by nondestructive gamma-gamma coincidence counting. The observed Al(26) specific activities were correlated with the chemical composition of potential target elements by a weighted least-squares fitting technique. The calculated Al(26) production rates from Al, Si, S, Mg, and Ca are presented. Most meteorite classes are shown to have a distribution of observed Al(26) vs calculated Al(26) primarily between 0.80 and 1.10, with the only exception of the eucrites. Two Apollo 12 samples, from mean depths of 15-20 cm, have approximately 0.78 of the Al(26) activities calculated for their chemical composition. A depletion in Al(26) in lunar samples shielded from solar radiation is in accord with a reduced cosmic-ray flux near the earth's orbit, relative to that experienced by most meteorites.

Cressy, P. J., Jr.↗

Comparative airship economics

As future LTA vehicles will be doomed right from the start if they do not fill a real need, some differences in transport philosophy between design engineers on the one hand and freight forwarders on the other are discussed. Watching rising costs of energy necessary to transport our cargo from A to B, and realizing that this price of energy is always included in the product's selling price at B, the apparent correlation between installed specific tractive force per unit of cargo weight and pure freighting cost are contemplated. Very speedy and progressive Airship designs are mistrusted, because the key to any low cost transport tool is to design it for its given task only, without any unnecessary sophistication.

Harthoorn, R.↗

Transport properties of oxygen

Tables of viscosity, thermal conductivity, and thermal diffusivity of oxygen as a function of temperature and pressure from the triple point to 320 K and at pressures to 100 MPa are presented. Auxiliary tables in engineering units are also given. Viscosity and thermal conductivity are calculated from published correlations. Density and specific heat at constant pressure, required to calculate thermal diffusivity, are obtained from an equation of state. The Prandtl number can be obtained quite easily from the values tabulated.

Roder, H. M.↗

Integrated Technology Rotor Methodology Assessment Workshop

The conference proceedings contains 14 formal papers and the results of two panel discussions. In addition, a transcript of discussion that followed the paper presentations and panels is included. The papers are of two kinds. The first seven papers were directed specifically to the correlation of industry and government mathematical models with data for rotorcraft stability from six experiments. The remaining 7 papers dealt with related topics in the prediction of rotor aeroelastic or aeromechanical stability. The first of the panels provided an evaluation of the correlation that was shown between the mathematical models and the experimental data. The second panel addressed the general problems of the validation of mathematical models.

Mcnulty, Michael J.↗

Calculation of flight vibration levels of the AH-1G helicopter and correlation with existing flight vibration measurements

NASA-Langley is sponsoring a rotorcraft structural dynamics program with the objective to establish in the U.S. a superior capability to utilize finite element analysis models for calculations to support industrial design of helicopter airframe structures. In the initial phase of the program, teams from the major U.S. manufacturers of helicopter airframes will apply extant finite element analysis methods to calculate loads and vibrations of helicopter airframes, and perform correlations between analysis and measurements. The aforementioned rotorcraft structural dynamics program was given the acronym DAMVIBS (Design Analysis Method for Vibrations). Sikorsky's RDYNE Rotorcraft Dynamics Analysis used for the correlation study, the specifics of the application of RDYNE to the AH-1G, and comparisons of the predictions of the method with flight data for loads and vibrations on the AH-1G are described. RDYNE was able to predict trends of variations of loads and vibrations with airspeed, but in some instances magnitudes differed from measured results by factors of two or three to one. Sensitivities were studied of predictions to rotor inflow modeling, effects of torsional modes, number of blade bending modes, fuselage structural damping, and hub modal content.

Sopher, R.↗

Trapping of noble gases in proton-irradiated silicate smokes

We have measured Ne, Ar, Kr, and Xe in Si2O3 'smokes' that were condensed on Al substrates, vapor-deposited with various mixtures of CH4, NH3, H2O3 and noble gases at 10 K and subsequently irradiated with 1 MeV protons to simulate conditions during grain mantle formation in interstellar clouds. Neither Ne nor Ar is retained by the samples upon warming to room temperature, but Xe is very efficiently trapped and retained. Kr is somewhat less effectively retained, typically depleted by factors of about 10-20 relative to Xe. Isotopic fractionation favoring the heavy isotopes of Xe and Kr of about 5-10-percent/amu is observed. Correlations between the specific chemistry of the vapor deposition and heavy noble gas retention are most likely the result of competition by the various species for irradiation-produced trapping sites. The concentration of Xe retained by some of these smokes exceeds that observed in phase Q of meteorites and, like phase Q, they do not seem to be carriers of the light noble gases.

Nichols, R. H., Jr.↗

Three views of two giant streams: Aligned observations at 1 AU, 4.6 AU, and 5.9 AU

A close radial alignment of the Interplanetary Monitoring Platform (IMP) and Pioneers 10 and 11 spacecraft in 1974 allows a nearly unambiguous, empirical study of the radial evolution of the interaction regions of two contrasting weak and strong, giant streams. The study confirms the main aspects of the standard model of corotating interaction regions: an expanding and strengthening pair of forward-reverse shocks sandwich a stream interface. It adds the follwoing concepts: stream group speed--the speed at the stream interface tends to remain constant with distance; corotating stream complexes--interaction regions can include features like noncompressive density enhancements and streamer belts; secondary interfaces--a possible precursor to the reverse shock; and emerging stream interfaces--one emerged between 1 AU and 4.6 AU. The study uses the conservation specific entropy to correlate features between spacecraft.

Siscoe, George↗

Polarization Rotator For LCTV Spatial Light Modulator

Polarization varies electronically to select complex-amplitude operating curve. Curve best suited to specific optical-correlator task selected rapidly and repeatedly by use of simple electronic command. Operating curves adjusted only with difficulty, by mechanical rotation of polarizer. Contains electronically-variable polarization-rotating device in place of fixed polarizer, and possibly additional device in place of fixed analyzer.

Juday, Richard↗

Applications of Constituent Data Assimilation Systems

Organizations in Europe, Australia, and the United States have recently broadened constituent assimilation activities beyond that water vapor, which has been assimilated for years in the numerical weather prediction community. Many of these activities have focused on ozone, with some efforts focused on the entire suite of reactive constituents that control the ozone distribution. This talk will draw from results from the near real-time ozone data assimilation system being run by NASA's Data Assimilation Office. This system utilizes ozone observations from both the TOMS and the SBUV instrument to generate global synoptic maps of ozone. The initial application of this product is to provide ozone fields to assist in the atmospheric corrections' that are necessary for the retrieval of information from other NASA instruments. The validation of the ozone assimilation system shows that the assimilated product agrees well with independent HALOE and ozonesonde observations. This suggests that the product is of sufficient quality to be extended to other applications. This talk will enumerate these other applications and present initial results from exploratory research. The applications being considered include estimates of tropospheric ozone, provision of ozone fields for interactive retrievals, use of analysis increments from the assimilation to evaluate model performance, and development of long-term consistent three-dimensional global ozone fields. The results from the exploratory studies are promising, and help demonstrate how assumptions made in the p development of the ozone assimilation impact the other applications. For instance, RMS errors in the current product are large near the tropopause, which is sensitive to the specification of vertical correlation functions, which in turns impacts the amount of ozone analyzed to be in the troposphere. How these sensitivities impact the different applications will also be discussed.

Rood, Richard B.↗

The Formation Age of Comets: Predicted Physical and Chemical Trends

The chemical composition of a comet has always been considered to be a function of where it formed in the nebula. We suggest that the most important factor in determining a comet's chemistry might actually be when it formed. We present specific predictions of correlations between the dust and volatile components to test our hypothesis.

Nuth, Joesph A., III↗

Results from NASA's Near Real Time Ozone Data Assimilation Systems

Organizations in Europe, Australia, and the United States have recently broadened constituent assimilation activities beyond water vapor, which has been assimilated for years in the numerical weather prediction applications. Many of these activities have focused on ozone, with some efforts focused on the entire suite of reactive constituents that control the ozone distribution. This talk will draw from results from the near real-time ozone data assimilation system being run by NASA's Data Assimilation Office. This system utilizes ozone observations from both the TOMS and the SBUV instrument to generate global synoptic maps of ozone. The initial application of this product is to provide ozone fields to assist in the atmospheric corrections' that are necessary for the retrieval of information from other NASA instruments. The validation of the ozone assimilation system shows that the assimilated product agrees well with independent HALOE and ozonesonde observations. Aside from providing a global synoptic map, there is verifiable geophysical information at higher vertical resolution than either of the date types input into the system. This talk will establish the validation results and enumerate applications of the ozone data assimilation system. Results from exploratory research will be presented. The applications being considered include estimates of tropospheric ozone, provision of ozone fields for interactive retrievals, use of analysis increments from the assimilation to evaluate model performance, and development of long-term consistent three-dimensional global ozone fields. The results from the exploratory studies are promising, and help demonstrate how assumptions made in the development of the ozone assimilation impact the other applications. For instance, RMS errors in the current product are large near the tropopause, which is sensitive to the specification of vertical correlation functions, which in turns impacts the amount of ozone analyzed to be in the troposphere. How these sensitivities impact the different applications will also be discussed.

Rood, Richard B.↗

Leonardo-BRDF: A New Generation Satellite Constellation

Instantaneous net radiation flux at the top of the atmosphere is one of the primary drivers of climate and global change. Since the dawn of the satellite era, great efforts and expense have gone into measuring this flux from single satellites and even (for a several-year period) from a constellation of three satellites called ERBE. However, the reflected solar flux is an angular and spectral integral over the so-called "BRDF" or Bidirectional Reflectance Distribution Function, which is the angular distribution of reflected solar radiation for each solar zenith angle and each wavelength. Previous radiation flux satellites could not measure instantaneous BRDF, so scientists have had to fall back on models or composites. Because their range of observed solar zenith angles was very limited due to sunsynchronous orbits, the resultant flux maps are too inaccurate to see the dynamics of radiation flux or to reliably correlate it with specific phenomena (hurricanes, biomass fires, urban pollution, dust outbreaks, etc.). Accuracy only becomes acceptable after monthly averaging, but this washes out almost all cause-and-effect information, further exacerbated by the lack of spectral resolution. Leonardo-BRDF is a satellite system designed to measure the instantaneous spectral BRDF using a formation of highly coordinated satellites, all pointing at the same Earth targets at the same time. It will allow scientists for the first time to assess the radiative forcing of climate due to specific phenomena, which is bound to be important in the ongoing debate about global warming and what is causing it. The formation is composed of two satellite types having, as instrument payloads, single highly-integrated miniature imaging spectrometers or radiometers. Two nearby "keystone" satellites anchor the formation and fly in static orbits. They employ wide field of view imaging spectrometers that are extremely light and compact. The keystone satellites are identical and can operate in alongtrack or cross-track mode, or anything in between, at ground command. This provides inherent system redundancy and cross-calibration capability. Several "wing-man" satellites in non-static orbits fly in formation up to 1000 km out from the keystone satellites to provide additional along- and cross-track angular sampling. They view the target(s) observed by the keystone satellites from different zenith and azimuth angles and are maneuverable within a limited range of zenith angle using thrusters, and within a large range of azimuth angle using clever orbit design. The wing-man satellites carry single miniature imaging radiometers with just a few wavelength bands in order to be lighter and more agile.

Esper, Jaime↗

Abiotic Versus Biotic Weathering Of Olivine As Possible Biosignatures

We are investigating the weathering of silicate minerals by both purely inorganic, and biologically mediated processes using field-emission scanning electron microscopy (FESEM) and energy dispersive x-ray spectroscopy (EDS). By resolving surface textures and chemical compositions of weathered surfaces at the sub-micron scale we hope to be able to distinguish abiotic from biotic weathering processes and so establish a new biosignature applicable to the study of astromaterials including but not limited to the Martian meteorites. Sterilized olivine grains (San Carlos, Arizona) no more than 1-2 mm in their longest dimension were optically assayed to be uniform in color and free of inclusions were selected as weathering subjects. Prior to all experiments surface morphologies and Fe/Mg ratios were determined for each grain using FE-SEM and EDS. Experiments were divided into two categories abiotic and biotic and were compared with "naturally" weathered samples. For the preliminary experiments, two trials (open and closed to the ambient laboratory environment) were performed under abiotic conditions, and three trials under biotic conditions (control, day 1 and day 2). The open system abiotic trials used sterile grains heated at 98 C and 200 C for both 24 and 48 hours in 1L double distilled de-ionized water. The closed system abiotic trials were conducted under the same conditions but in a sealed two layer steel/Teflon "bomb" apparatus. The biotic trials used sterile grains mounted in a flow-through device attached to a wellhead on the Columbia River aquifer. Several discolored, altered, grains were selected to document "natural" weathering surface textures for comparison with the experimental samples. Preliminary results indicate there are qualitative differences in weathered surface textures among all the designed experiments. The olivine grains in abiotic trials displayed etching, pitting, denticulate margins, dissolution and clay formation. The scale of the features ranged from tens to a few microns with textures that remained relatively sharp and were crystallographically controlled. These results were comparable to that observed in the "naturally" weathered comparison/reference grains. Chemical analysis by EDS indicates these textures correlated with the relative loss of Mg and Fe cations by diffusional processes. In contrast the biotic results indicated changes in the etching patterns on the scale of hundreds of nm, which are neither sharp nor crystallographically controlled (nanoetching). Organisms, organic debris and/or extracellular polymeric substances (biofilm) were often in close proximity or direct contact with the nanoetching. While there are many poorly constrained variables in natural weathering experiments to contend with, such as the time scale, the chemistry of the fluids and degree of biologic participation, some preliminary observations can be made: (1) certain distinct surface textures appear correlated with the specific processes giving rise to these textures; (2) the process of diffusing cations can produce many similar styles of surface textural changes; and (3) the main difference between abiotic and biotically produced weathering is the scale (microns versus nanometers) and the style (crystallographically versus noncrystallographically controlled) of the textural features. Further investigation into nanosize scale surface textures should attempt to quantify both textures and chemical changes of the role of microorganisms in the weathering of silicates. Additional experiments addressing nanoscale textures of shock features for comparison with the current data set.

Longazo, Teresa G.↗

Thermal/Fluid Analysis of a Composite Heat Exchanger for Use on the RLV Rocket Engine

As part of efforts to design a regeneratively cooled composite nozzle ramp for use on the reusable vehicle (RLV) rocket engine, a C-SiC composite heat exchanger concept was proposed for thermal performance evaluation. To test the feasibility of the concept, sample heat exchanger panels were made to fit the Glenn Research Center's cell 22 for testing. Operation of the heat exchanger was demonstrated in a combustion environment with high heat fluxes similar to the RLV Aerospike Ramp. Test measurements were reviewed and found to be valuable for the on-going fluid and thermal analysis of the actual RLV composite ramp. Since the cooling fluid for the heat exchanger is water while the RLV Ramp cooling fluid is LH2, fluid and therma models were constructed to correlate to the specific test set-up. The knowledge gained from this work will be helpful for analyzing the thermal response of the actual RLV Composite Ramp. The coolant thermal properties for the models are taken from test data. The heat exchanger's cooling performance was analyzed using the Generalized Fluid System Simulation Program (GFSSP). Temperatures of the heat exchanger's structure were predicted in finite element models using Patran and Sinda. Results from the analytical models and the tests show that RSC's heat exchanger satisfied the combustion environments in a series of 16 tests.

Nguyen, Dalton↗

Thermal/Fluid Analysis of a Composite Heat Exchanger for Use on the RLV Rocket Engine

As part of efforts to design a regeneratively cooled composite nozzle ramp for use on the reusable vehicle (RLV) rocket engine, an C-SiC composites heat exchanger concept was proposed for thermal performance evaluation. To test the feasibility of the concept, sample heat exchanger panels were made to fit the Glenn Research Center's cell 22 for testing. Operation of the heat exchanger was demonstrated in a combustion environment with high heat fluxes similar to the RLV Aerospike Ramp. Test measurements were reviewed and found to be valuable for the on going fluid and thermal analysis of the actual RLV composite ramp. Since the cooling fluid for the heat exchanger is water while the RLV Ramp cooling fluid is LH2, fluid and thermal models were constructed to correlate to the specific test set-up. The knowledge gained from this work will be helpful for analyzing the thermal response of the actual RLV Composite Ramp. The coolant thermal properties for the models are taken from test data. The heat exchanger's cooling performance was analyzed using the Generalized Fluid System Simulation Program (GFSSP). Temperatures of the heat exchanger's structure were predicted in finite element models using Patran and Sinda. Results from the analytical models and the tests show that RSC's heat exchanger satisfied the combustion environments in a series of 16 tests.

Nguyen, Dalton↗

Thin filament diversity and physiological properties of fast and slow fiber types in astronaut leg muscles

Slow type I fibers in soleus and fast white (IIa/IIx, IIx), fast red (IIa), and slow red (I) fibers in gastrocnemius were examined electron microscopically and physiologically from pre- and postflight biopsies of four astronauts from the 17-day, Life and Microgravity Sciences Spacelab Shuttle Transport System-78 mission. At 2.5-microm sarcomere length, thick filament density is approximately 1,012 filaments/microm(2) in all fiber types and unchanged by spaceflight. In preflight aldehyde-fixed biopsies, gastrocnemius fibers possess higher percentages (approximately 23%) of short thin filaments than soleus (9%). In type I fibers, spaceflight increases short, thin filament content from 9 to 24% in soleus and from 26 to 31% in gastrocnemius. Thick and thin filament spacing is wider at short sarcomere lengths. The Z-band lattice is also expanded, except for soleus type I fibers with presumably stiffer Z bands. Thin filament packing density correlates directly with specific tension for gastrocnemius fibers but not soleus. Thin filament density is inversely related to shortening velocity in all fibers. Thin filament structural variation contributes to the functional diversity of normal and spaceflight-unloaded muscles.

Non-NASA Center↗

Stress-induced subclinical reactivation of varicella zoster virus in astronauts

Varicella zoster virus (VZV) becomes latent in human ganglia after primary infection. VZV reactivation occurs primarily in elderly individuals, organ transplant recipients, and patients with cancer and AIDS, correlating with a specific decline in cell-mediated immunity to the virus. VZV can also reactivate after surgical stress. The unexpected occurrence of thoracic zoster 2 days before space flight in a 47-year-old healthy astronaut from a pool of 81 physically fit astronauts prompted our search for VZV reactivation during times of stress to determine whether VZV can also reactivate after non-surgical stress. We examined total DNA extracted from 312 saliva samples of eight astronauts before, during, and after space flight for VZV DNA by polymerase chain reaction: 112 samples were obtained 234-265 days before flight, 84 samples on days 2 through 13 of space flight, and 116 samples on days 1 through 15 after flight. Before space flight, only one of the 112 saliva samples from a single astronaut was positive for VZV DNA. In contrast, during and after space flight, 61 of 200 (30%) saliva samples were positive in all eight astronauts. No VZV DNA was detected in any of 88 saliva samples from 10 healthy control subjects. These results indicate that VZV can reactivate subclinically in healthy individuals after non-surgical stress. Copyright 2004 Wiley-Liss, Inc.

Astronauts↗