Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Fuel convergence sensitivity in indirect drive implosions

In inertial confinement fusion experiments at the National Ignition Facility, a spherical shell of deuterium–tritium fuel is imploded in an attempt to reach the conditions needed for fusion, self-heating, and eventual ignition. Since theory and simulations indicate that ignition efficacy in 1D improves with increasing imploded fuel convergence ratio, it is useful to understand the sensitivity of the scale-invariant fuel convergence on all measurable or inferable 1D parameters. In this paper, we develop a simple isobaric and isentropic compression scaling model incorporating sensitivity to the in-flight adiabat inferred from shock strengths, to measured implosion velocity, and to known initial ablator and fuel aspect ratio and mass ratio. The model is first benchmarked to 1D implosion simulations spanning a variety of relevant implosion designs. We then use the model to compare compressibility trends across all existing indirect-drive layered implosion data from the facility spanning three ablators [CH, carbon (C), and Be], for which in-flight fuel adiabats varied from 1.6 to 5 by varying the number of drive shocks from 2 to 4, peak implosion velocities varied by 1.4×, capsule radii by 50%, and initial fuel aspect ratios by 1.4×. We find that the strength of the first shock is the dominant contributor setting the maximum fuel convergence. We also observe additional sensitivities to successive shock strengths and fuel aspect ratios that improve the agreement between the expected and measured compression for carbon and Be designs with adiabats above 3. A principal finding is that the adiabat 2.5 C-shell designs exhibit less convergence than CH-shell designs of similar inferred in-flight adiabat.

Landen, O. L. (ORCID:0000000214998217)↗

Constitutive modeling of shock response of PTFE

The PTFE (polytetrafluoroethylene) material is complex and attracts attention of the shock physics researchers because it has amorphous and crystalline components. In turn, the crystalline component has four known phases with the high pressure transition to phase III. At the same time, as has been recently studied using spectrometry, the crystalline region is growing with load. Stress and velocity shock-wave profiles acquired recently with embedded gauges demonstrate feature that may be related to impedance mismatches between the regions subjected to some transitions resulting in density and modulus variations. We consider the above mentioned amorphous-to-crystalline transition and the high pressure Phase II-to-III transitions as possible candidates for the analysis. The present work utilizes a multi-phase rate sensitive model to describe shock response of the PTFE material. One-dimensional experimental shock wave profiles are compared with calculated profiles with the kinetics describing the transitions. The objective of this study is to understand the role of the various transitions in the shock response of PTFE.

36 MATERIALS SCIENCE↗

n-Butane: Ignition delay measurements at high pressure and detailed chemical kinetic simulations

Ignition delay time measurements were recorded at equivalence ratios of 0.3, 0.5, 1, and 2 for n-butane at pressures of approximately 1, 10, 20, 30 and 45 atm at temperatures from 690 to 1430 K in both a rapid compression machine and in a shock tube. A detailed chemical kinetic model consisting of 1328 reactions involving 230 species was constructed and used to validate the delay times. Moreover, this mechanism has been used to simulate previously published ignition delay times at atmospheric and higher pressure. Arrhenius-type ignition delay correlations were developed for temperatures greater than 1025 K which relate ignition delay time to temperature and concentration of the mixture. Furthermore, a detailed sensitivity analysis and a reaction pathway analysis were performed to give further insight to the chemistry at various conditions. When compared to existing data from the literature, the model performs quite well, and in several instances the conditions of earlier experiments were duplicated in the laboratory with overall good agreement. To the authors' knowledge, the present paper presents the most comprehensive set of ignition delay time experiments and kinetic model validation for n-butane oxidation in air. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Order Weno Simulations of Three-Dimensional Reshocked Richtmyer-Meshkov Instability to Late Times: Dynamics, Dependence on Initial Conditions, and Comparisons to Experimental Data

The dynamics of the reshocked multi-mode Richtmyer-Meshkov instability is investigated using 513 x 257{sup 2} three-dimensional ninth-order weighted essentially nonoscillatory shock-capturing simulations. A two-mode initial perturbation with superposed random noise is used to model the Mach 1.5 air/SF{sub 6} Vetter-Sturtevant shock tube experiment. The mass fraction and enstrophy isosurfaces, and density cross-sections are utilized to show the detailed flow structure before, during, and after reshock. It is shown that the mixing layer growth agrees well with the experimentally measured growth rate before and after reshock. The post-reshock growth rate is also in good agreement with the prediction of the Mikaelian model. A parametric study of the sensitivity of the layer growth to the choice of amplitudes of the short and long wavelength initial interfacial perturbation is also presented. Finally, the amplification effects of reshock are quantified using the evolution of the turbulent kinetic energy and turbulent enstrophy spectra, as well as the evolution of the baroclinic enstrophy production, buoyancy production, and shear production terms in the enstrophy and turbulent kinetic transport equations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE STANDING ACCRETION SHOCK INSTABILITY IN THE DISK AROUND THE KERR BLACK HOLE

This paper is a sequel to our previous work for accretion onto a Schwarzschild black hole and the so-called standing accretion shock instability; in this paper, we investigate nonaxisymmetric perturbations for a Kerr black hole. The linear and nonlinear phases for the shock evolution are analyzed in detail by both two-dimensional general relativistic hydrodynamical simulations and linear analysis. Since the structure of steady axisymmetric accretion flows with a standing shock wave is very sensitive to the inner transonic flow, their properties such as Mach numbers, which are important for the stability, depend on the Kerr parameter very much. Although the essential features of the instability do not differ from the previous results for the Schwarzschild black hole, the frame-dragging effects specific to the Kerr black hole are also evident. Interestingly, the oscillation periods of the fundamental unstable modes are dependent only on the shock radius irrespective of the injection parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of shock compression on aluminum particles in condensed media

Specimens consisting of either spherical or flake aluminum particles saturated with liquid heptane were subjected to reflected shock pressures on the order of 20-30 GPa. Postmortem analysis of the spherical powder shows that while average size does not significantly change, surface morphology is no longer spherical but sharp edged with evidence of shear and particle break-up. A similar analysis for flakes shows break down to finer particles one order less than the original flake size. This suggests that the oxide layer was damaged and that bare aluminum was exposed, thus increasing aluminum particle sensitivity to reaction.

36 MATERIALS SCIENCE↗

Ignition Delay Times and Chemical Kinetic Model Validation for Hydrogen and Ammonia Blending With Natural Gas at Gas Turbine Relevant Conditions

Ignition delay times from undiluted mixtures of natural gas (NG)/H 2 /Air and NG/NH 3 /Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000 and 1500 K near a constant pressure of 25 bar. As mentioned, mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data are compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H 2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH 3 fuel addition made no noticeable difference in ignition time. NG/NH 3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis. Here, the reaction CH 3 + O 2 = CH 3 O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.

33 ADVANCED PROPULSION SYSTEMS↗

Kinetics of ignition of saturated hydrocarbons by nonequilibrium plasma: C{sub 2}H{sub 6} -to C{sub 5}H{sub 12}-containing mixtures

The kinetics of ignition in C{sub n}H{sub 2n+2}:O{sub 2}:Ar mixtures for n=2 to 5 has been studied experimentally and numerically after a high-voltage nanosecond discharge. The ignition delay time behind a reflected shock wave was measured with and without the discharge. It was shown that the initiation of the discharge with a specific deposited energy of 10-30 mJ/cm{sup 3} leads to an order of magnitude decrease in the ignition delay time. Discharge processes and following chain chemical reactions with energy release were simulated. The generation of atoms, radicals and excited and charged particles was numerically simulated using the measured time-resolved discharge current and electric field in the discharge phase. The calculated densities of the active particles were used as input data to simulate plasma-assisted ignition. The sensitivity of the results to variation in electron cross sections, reaction rates and radical composition was investigated. Good agreement was obtained between the calculated ignition delay times and the experimental data. The analysis of the simulation results showed that the effect of nonequilibrium plasma on the ignition delay is associated with faster development of chain reactions, due to atoms and radicals produced by the electron impact dissociation of molecules in the discharge phase. Finally, we studied the role of various hydrocarbon radicals in the plasma-assisted ignition of the mixtures under consideration. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Sandia MEMS passive shock sensor : FY08 design summary.

This report summarizes design and modeling activities for the MEMS passive shock sensor. It provides a description of past design revisions, including the purposes and major differences between design revisions but with a focus on Revisions 4 through 7 and the work performed in fiscal year 2008 (FY08). This report is a reference for comparing different designs; it summarizes design parameters and analysis results, and identifies test structures. It also highlights some of the changes and or additions to models previously documented [Mitchell et al. 2006, Mitchell et al. 2008] such as the way uncertainty thresholds are analyzed and reported. It also includes dynamic simulation results used to investigate how positioning of hard stops may reduce vibration sensitivity.

47 OTHER INSTRUMENTATION↗

Isobutane ignition delay time measurements at high pressure and detailed chemical kinetic simulations

Rapid compression machine and shock-tube ignition experiments were performed for real fuel/air isobutane mixtures at equivalence ratios of 0.3, 0.5, 1, and 2. The wide range of experimental conditions included temperatures from 590 to 1567 K at pressures of approximately 1, 10, 20, and 30 atm. These data represent the most comprehensive set of experiments currently available for isobutane oxidation and further accentuate the complementary attributes of the two techniques toward high-pressure oxidation experiments over a wide range of temperatures. The experimental results were used to validate a detailed chemical kinetic model composed of 1328 reactions involving 230 species. This mechanism has been successfully used to simulate previously published ignition delay times as well. A thorough sensitivity analysis was performed to gain further insight to the chemical processes occurring at various conditions. Additionally, useful ignition delay time correlations were developed for temperatures greater than 1025 K. Comparisons are also made with available isobutane data from the literature, as well as with 100% n-butane and 50-50% n-butane-isobutane mixtures in air that were presented by the authors in recent studies. In general, the kinetic model shows excellent agreement with the data over the wide range of conditions of the present study. (author)

2-METHYLPROPANE↗

OH time-histories during oxidation of n-heptane and methylcyclohexane at high pressures and temperatures

OH concentration time-histories during n-heptane and methylcyclohexane (MCH) oxidation were measured behind reflected shock waves in a heated, high-pressure shock tube. Experimental conditions covered temperatures of 1121 to 1332 K, pressures near 15 atm, and initial fuel concentrations of 750 and 1000 ppm (by volume), and an equivalence ratio of 0.5 with O{sub 2} as the oxidizer and argon as the bath gas. OH concentrations were measured using narrow-linewidth ring-dye laser absorption near the R-branchhead of the OH A-X(0,0) system at 306.47 nm. These current measurements together with our recent results for n-dodecane oxidation [S.S. Vasu, D.F. Davidson, Z. Hong, V. Vasudevan, R.K. Hanson, Proc. Combust. Inst. 32 (2009), doi:10.1016/j.proci.2008.05.006] provide critically needed validation targets for jet fuel surrogate kinetic mechanisms and further improve understanding of high-pressure, high-temperature oxidation chemistry. Detailed comparisons of these OH time-histories with the predictions of various kinetic mechanisms were made. Sensitivity and pathway analyses for these reference fuel components were performed, leading to reaction rate recommendations with improved model performance. Current results are the first quantitative measurements of OH time-histories during high-pressure oxidation of these fuels, and hence are a critical step toward development of accurate reaction models for jet fuel surrogates. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Skin Friction Extracted from Surface Pressure in Incident Shock-Wave/Boundary-Layer Interaction

High-resolution skin-friction fields are extracted from pressure-sensitive paint (PSP) data obtained in shock-wave/boundary-layer interaction (SWBLI). The method of extracting skin friction from surface pressure is described, including the fundamental relation between skin friction and surface pressure, the variational method, error analysis, and an approximate iterative method. The proposed method is based on a coupling relation between skin friction and surface pressure, where the boundary enstrophy flux is suitably modeled or approximated. This method is applied to unsteady PSP data obtained in incident SWBLIs at Mach 2.5 for different Reynolds numbers, revealing the skin-friction structures of the flows: particularly, the separation bubble induced by the incident shock wave. The extracted results are in good agreement with the data obtained by the surface-stress-sensitive film.

skin friction↗

Principles of the radiative ablation modeling

Indirectly driven inertial confinement fusion (ICF) rests on the setting up of a radiation temperature within a laser cavity and on the optimization of the capsule implosion ablated by this radiation. In both circumstances, the ablation of an optically thick medium is at work. The nonlinear radiation conduction equations that describe this phenomenon admit different kinds of solutions called generically Marshak waves. In this paper, a completely analytic model is proposed to describe the ablation in the subsonic regime relevant to ICF experiments. This model approximates the flow by a deflagrationlike structure where Hugoniot relations are used in the stationary part from the ablation front up to the isothermal sonic Chapman-Jouguet point and where the unstationary expansion from the sonic point up to the external boundary is assumed quasi-isothermal. It uses power law matter properties. It can also accommodate arbitrary boundary conditions provided the ablation wave stays very subsonic and the surface temperature does not vary too quickly. These requirements are often met in realistic situations. Interestingly, the ablated mass rate, the ablation pressure, and the absorbed radiative energy depend on the time history of the surface temperature, not only on the instantaneous temperature values. The results compare very well with self-similar solutions and with numerical simulations obtained by hydrodynamic code. This analytic model gives insight into the physical processes involved in the ablation and is helpful for optimization and sensitivity studies in many situations of interest: radiation temperature within a laser cavity, acceleration of finite size medium, and ICF capsule implosion, for instance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MASS ACCRETION AND ITS EFFECTS ON THE SELF-SIMILARITY OF GAS PROFILES IN THE OUTSKIRTS OF GALAXY CLUSTERS

Galaxy clusters exhibit remarkable self-similar behavior which allows us to establish simple scaling relationships between observable quantities and cluster masses, making galaxy clusters useful cosmological probes. Recent X-ray observations suggested that self-similarity may be broken in the outskirts of galaxy clusters. In this work, we analyze a mass-limited sample of massive galaxy clusters from the Omega500 cosmological hydrodynamic simulation to investigate the self-similarity of the diffuse X-ray emitting intracluster medium (ICM) in the outskirts of galaxy clusters. We find that the self-similarity of the outer ICM profiles is better preserved if they are normalized with respect to the mean density of the universe, while the inner profiles are more self-similar when normalized using the critical density. However, the outer ICM profiles as well as the location of accretion shock around clusters are sensitive to their mass accretion rate, which causes the apparent breaking of self-similarity in cluster outskirts. We also find that the collisional gas does not follow the distribution of collisionless dark matter (DM) perfectly in the infall regions of galaxy clusters, leading to 10% departures in the gas-to-DM density ratio from the cosmic mean value. Our results have a number implications for interpreting observations of galaxy clusters in X-ray and through the Sunyaev–Zel’dovich effect, and their applications to cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

SPREADING LAYERS IN ACCRETING OBJECTS: ROLE OF ACOUSTIC WAVES FOR ANGULAR MOMENTUM TRANSPORT, MIXING, AND THERMODYNAMICS

Disk accretion at a high rate onto a white dwarf (WD) or a neutron star has been suggested to result in the formation of a spreading layer (SL)—a belt-like structure on the object's surface, in which the accreted matter steadily spreads in the poleward (meridional) direction while spinning down. To assess its basic characteristics, we perform two-dimensional hydrodynamic simulations of supersonic SLs in the relevant morphology with a simple prescription for cooling. We demonstrate that supersonic shear naturally present at the base of the SL inevitably drives sonic instability that gives rise to large-scale acoustic modes governing the evolution of the SL. These modes dominate the transport of momentum and energy, which is intrinsically global and cannot be characterized via some form of local effective viscosity (e.g., α-viscosity). The global nature of the wave-driven transport should have important implications for triggering Type I X-ray bursts in low-mass X-ray binaries. The nonlinear evolution of waves into a system of shocks drives effective rearrangement (sensitively depending on thermodynamical properties of the flow) and deceleration of the SL, which ultimately becomes transonic and susceptible to regular Kelvin–Helmholtz instability. We interpret this evolution in terms of the global structure of the SL and suggest that mixing of the SL material with the underlying stellar fluid should become effective only at intermediate latitudes on the accreting object's surface, where the flow has decelerated appreciably. In the near-equatorial regions the transport is dominated by acoustic waves and mixing is less efficient. We speculate that this latitudinal nonuniformity of mixing in accreting WDs may be linked to the observed bipolar morphology of classical nova ejecta.

79 ASTRONOMY AND ASTROPHYSICS↗

The Influence of Polar Coronal Holes on the Polar ENA Flux Observed by IBEX

Polar coronal holes (PCHs) fill the high-latitude heliosphere with fast solar wind during the minimum phase of the solar cycle. This leads to a hardening of the energy spectrum of the proton plasma in the inner heliosheath (IHS), observed as energetic neutral atoms (ENAs) by the Interstellar Boundary Explorer (IBEX). In particular, the highest-energy channel of the IBEX-Hi instrument (at 4.3 keV) is a very sensitive indicator of pretermination shock fast wind entering the IHS. Herein, we show that the 4.3 keV ENA flux observed from the ecliptic poles is well correlated with the area of the solar surface covered by PCHs throughout the solar cycle, which demonstrates the existence of a direct connection between coronal structure and the dynamic properties of the IHS.

79 ASTRONOMY AND ASTROPHYSICS↗

Ogo 5 magnetic-field data near the earth's bow shock - A correlation with theory.

Magnetic-field data obtained in the earth's bow-shock region with a high-resolution triaxial fluxgate magnetometer aboard the Ogo 5 satellite have been correlated with a theory of Tidman and Northrop (1968). These authors have shown that either of two hypotheses about the nature of low-frequency magnetic waves could be invoked to explain previous observations. We have observed exponentially decaying upstream waves that are consistent with only one of these hypotheses. This observation allows use of the theory to infer the local shock velocity and frequency of driving currents within the shock. This method of finding the shock velocity is less sensitive to errors in the plasma parameters than is the method based on the Rankine-Hugoniot relations.

Guha, J. K.↗

Simulations of collisionless shocks

A problem of critical importance to space and astrophysics is the existence and properties of high-Mach-number shocks. In this letter the results of simulations of perpendicular shocks with Alfven Mach number 22 are presented. It is shown that the shock structure is a sensitive function of resistivity, becoming turbulent when the resistivity is too low. The problem of electron heating, and the extension of the results to higher Mach numbers are discussed.

Quest, K. B.↗