Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sensitivity theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Subnanometer Visualization of Spatially Varying Local Field Resonances that Drive Tip-Enhanced Optical Spectroscopy

Our knowledge of the electromagnetic fields that power modern nanoscale optical measurements, including (non)linear tip-enhanced Raman and photoluminescence, chiefly stems from numerical simulations. Aside from idealized in silico vs heterogeneous (nano)structures in the laboratory, challenges in quantitative descriptions of nanoscale light–matter interactions more generally stem from the very nature of the problem, which lies at the interface of classical and quantum theories. This is particularly the case in ultrahigh spatial resolution measurements that are sensitive to local optical field variations that take place on subnanometer length scales. Here this work approaches this challenge through extinction-based spectral nanoimaging experiments. We demonstrate <1 nm spatial resolution in hyperspectral extinction measurements that track spatially varying plasmon resonances. We describe the principles behind our experiments and highlight more general implications of our observations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of magnetic noise from conductive shields in the 10–300 kHz frequency range

Here we present experimental and theoretical investigations of magnetic noise originating from radio-frequency (RF) conductive shields of flat geometry in the inductance-dominated impedance regime below 300 kHz. The measurement is based on a Q-factor determination of a coil that provides a sufficient sensitivity, placed at the position where the shield magnetic noise is measured. The theory is based on calculations of magnetic field and inductance of one or a few flat rings that emulate a conductive shield. The theoretical model is found to be in close agreement with experimental data. It can be used to predict the magnetic noise of a conductive shield with different thicknesses, conductivities, and temperatures at different distances for a wide range of frequencies. Although the model can be generalized for a more arbitrary shield geometry, in its presented form, it can be applied to the magnetic noise predictions when the shield surface curvature is not large. One important conclusion is that the RF conductive shield can generate the magnetic noise much lower than femtotesla, and, thus, it can be used in many precision experiments targeting minute high-frequency magnetic signals, such as detection of magnetic resonance imaging and nuclear quadrupole resonance signals and search for axion dark matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Searching for the QCD dark-matter axion

Proposed half a century ago, the quantum chromodynamics (QCD) axion explains the lack of charge and parity violation in the strong interactions and is a compelling candidate for cold dark matter. The last decade has seen the rapid improvement in the sensitivity and mass-range of axion experiments, as well as developments in theory regarding consequences of axion dark matter. In this review we cover the astrophysical searches and theoretical progress regarding the QCD axion. We then give a historical overview of axion searches, review the current status and future prospects of dark matter axion searches, and then discuss proposed dark matter axion techniques currently in development.

79 ASTRONOMY AND ASTROPHYSICS↗

Longer-lived mediators from charged mesons and photons at neutrino experiments

Since many of the dark-sector particles interact with Standard Model (SM) particles in multiple ways, they can appear in experimental facilities where SM particles appear in abundance. In this study, we explore a particular class of longer-lived mediators that are dominantly produced from photons and charged mesons that arise in proton-beam fixed-target-type neutrino experiments. This class of mediators encompasses light scalars that appear in theories like extended Higgs sectors, muon(electro)philic scalars, etc. We evaluate the sensitivities of these mediators at beam-based neutrino experiments such as the finished ArgoNeuT, ongoing MicroBooNE, SBND, ICARUS, and the upcoming DUNE experiment. We find that muonphilic scalars are more enhanced while produced from three-body decay of charged mesons. The above-mentioned experiments can probe unexplored regions of parameter space that can explain the current discrepancy in the anomalous magnetic moment of muons. We further find that Compton-like scattering of photons is the largest source of electrophilic scalars. By utilizing this, the DUNE Near Detector can explore new regions in the sensitivity space of electrophilic scalars. We also show that Bethe-Heitler scattering processes can be used to probe flavor-specific lepton final states even for the mediator masses below twice the lepton mass. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Zero-Field NMR and Millitesla-SLIC Spectra for >200 Molecules from Density Functional Theory and Spin Dynamics

NMR is usually performed at magnetic fields of 1 T and above to obtain sufficient sensitivity and spectral dispersion to identify chemicals based on chemical shifts and J couplings. At lower fields, the advent of hyperpolarization technologies and sensitive detectors can address sensitivity concerns. However, it remains disputed whether spectral signatures at zero and ultra-low fields are sufficient for chemical identification. Here, we report an all–electron DFT-based batch calculation of J-coupling constants, which are used to generate J coupling NMR spectra at zero field and 6.5 mT for over 200 small molecules. In the developed computational tool chain, we first used the all-electron FHI-aims code to calculate the molecular J couplings and chemical shifts. We then fed the calculated NMR parameters into the NMR simulation package SPINACH to simulate both heteronuclear J coupling spectra at zero-field, and homonuclear J coupling spectra as spin-lock induced crossing (SLIC) spectra at ultra-low field (6.5 mT). The resulting spectra demonstrate that zero and ultra-low field NMR spectra can represent unique identifiers of chemical structure for small molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Trigger Linkage Dynamics in Energetic Materials Using Mixed Picramide Nitrate Ester Explosives

The ability to predict the handling sensitivity of new organic energetic materials has been a longstanding goal. We report the synthesis and characterization of six new nitropicramide energetic materials with mixed functional groups that mimic known explosives such as nitroglycerin, erythritol tetranitrate (ETN), and pentaerythritol tetranitrate (PETN). The molecules have been studied theoretically using quantum molecular dynamics (QMD) simulations and density functional theory (DFT) calculations to identify the weakest bond in the reactants - the trigger-linkages - which control handling sensitivity, and to quantify their specific enthalpies of explosion. In good accord with the drop weight impact sensitivity data, our calculations predict that the sensitivities of the molecules are very similar owing to the small variations of the energy output and rates of trigger linkage rupture. In addition, both the QMD and DFT calculations point to the nitropicramide N–NO 2 bonds as the trigger linkages rather than the more typical O–NO 2 bonds. We propose that the switch of the trigger linkage from the nitrate esters to the nitramine groups arises from the strongly electron withdrawing character of the adjacent trinitrobenzene groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Global dipole symmetry, compact Lifshitz theory, tensor gauge theory, and fractons

We study field theories with global dipole symmetries and gauge dipole symmetries. The famous Lifshitz theory is an example of a theory with a global dipole symmetry. We study in detail its 1+1d version with a compact field. When this global symmetry is promoted to a $U(1)$ dipole gauge symmetry, the corresponding gauge field is a tensor gauge field. This theory is known to lead to fractons. In order to resolve various subtleties in the precise meaning of these global or gauge symmetries, we place these 1+1d theories on a lattice and then take the continuum limit. Interestingly, the continuum limit is not unique. Different limits lead to different continuum theories, whose operators, defects, global symmetries, etc. are different. We also consider a lattice gauge theory with a $\mathbb Z_N$ dipole gauge group. Surprisingly, several physical observables, such as the ground state degeneracy and the mobility of defects depend sensitively on the number of sites in the lattice. Our analysis forces us to think carefully about global symmetries that do not act on the standard Hilbert space of the theory, but only on the Hilbert space in the presence of defects. We refer to them as time-like global symmetries and discuss them in detail. Furthermore, these time-like global symmetries allow us to phrase the mobility restrictions of defects (including those of fractons) as a consequence of a global symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Automated reaction kinetics and network exploration (Arkane): A statistical mechanics, thermodynamics, transition state theory, and master equation software

The open-source statistical mechanics software described here, Arkane–Automated Reaction Kinetics and Network Exploration–facilitates computations of thermodynamic properties of chemical species, high-pressure limit reaction rate coefficients, and pressure-dependent rate coefficient over multi-well molecular potential energy surfaces (PES) including the effects of collisional energy transfer on phenomenological kinetics. Arkane can use estimates to fill in information for molecules or reactions where quantum chemistry information is missing. The software solves the internal energy master equation for complex unimolecular reaction systems. Inputs to the software include converged electronic structure computations performed by the user using a variety of supported software packages (Gaussian, Molpro, Orca, TeraChem, Q-Chem, Psi4). The software outputs high-pressure limit rate coefficients and pressure-dependent phenomenological rate coefficients, as well as computed thermodynamic properties (enthalpy, entropy, and constant pressure heat capacity) with added energy corrections. Some of the key features of Arkane include treatment of 1D, 2D or ND hindered internal rotation modes, treatment of free internal rotation modes, quantum tunneling effect consideration, transition state theory (TST) and Rice-Ramsperger-Kassel-Marcus (RRKM) rate coefficient computations, master equation solution with four implemented methods, inverse-Laplace transform of high-pressure limit rate coefficients into the energy domain, energy corrections based on bond-additivity or isodesmic reactions, automated and efficient PES exploration, and PES sensitivity analysis. The present work describes the design of Arkane, how it should be used, and refers to the theory that it employs. Arkane is distributed via the RMG-Py software suite (https://github.com/ReactionMechanismGenerator/RMG-Py).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studying excited-state-specific perturbation theory on the Thiel set

Here, we explore the performance of a recently introduced N 5 -scaling excited-state-specific second order perturbation theory (ESMP2) on the singlet excitations of the Thiel benchmarking set. We find that, without regularization, ESMP2 is quite sensitive to π system size, performing well in molecules with small π systems but poorly in those with larger π systems. With regularization, ESMP2 is far less sensitive to π system size and shows a higher overall accuracy on the Thiel set than CC2, equation of motion-coupled cluster with singles and doubles, CC3, and a wide variety of time-dependent density functional approaches. Unsurprisingly, even regularized ESMP2 is less accurate than multi-reference perturbation theory on this test set, which can, in part, be explained by the set’s inclusion of some doubly excited states but none of the strong charge transfer states that often pose challenges for state-averaging. Beyond energetics, we find that the ESMP2 doubles norm offers a relatively low-cost way to test for doubly excited character without the need to define an active space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exotic particles at the DUNE near detector from charged pion scattering

Fixed-target proton-beam experiments produce a multitude of charged pions that rescatter in the beam dump. These charged pion scattering events can be an additional irreducible source of exotic particles which couple to photons or hadrons. We analyze the sensitivity of the DUNE near detector complex to millicharged particles (MCPs) and heavy axionlike particles (ALPs) with low-energy couplings to gluons. Using the framework of chiral perturbation theory, we demonstrate regimes of parameter space where the charged pion production channel dominates over previously considered production mechanisms for both MCPs and ALPs, thereby improving the sensitivity of DUNE to these new particles compared to previous studies. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impurity gas monitoring using ultrasonic sensing and neural networks: forward and inverse problems

Ultrasonic sensing is a non-invasive technique for monitoring impurity gas composition in various industrial applications where safety and regulatory compliance are crucial. In this study, ultrasonic sensing and neural networks were used to analyze impurity gases (i.e., air and argon) in helium. An experimental platform was established to acquire ultrasonic data. In the forward problem, an artificial neural network (ANN) model was used to forecast the response and time-of-flight (TOF) based on the excitation, and argon and air concentrations. The inverse problem was solved using a convolutional neural network (CNN) to predict the argon and air concentrations given the ultrasonic response and excitation. The results showed that the ANN accurately predicted the ultrasonic response and the change in TOF with concentration. As the air concentration was increased from 0 to 9.8%, the TOF sensitivity to detect argon decreased by 39.8% and 16.1% from ANN and sound speed theory, respectively. The CNN demonstrated high accuracy in predicting concentrations for inputs in the testing dataset. The application of the trained CNN indicated that it over-predicts air concentration while under-predicting the argon concentration. To improve accuracy, the predicted air and argon concentrations should be corrected by -0.992% and 1.027% bias, respectively.

47 OTHER INSTRUMENTATION↗

The ASC-V&V Program [Slides]

The fundamental goal of the ASC-V&V Program is to obtain a quantitative understanding of our customers’ needs and priorities, and use it to assess applicability of numerical models of physical phenomena to physics questions, sensitivity of physics questions to physical phenomena, fidelity of a numerical implementation to the theory, the bounds of validity of theories, fidelity and coverage of experimental data relative to regimes of interest for physics questions, in order to warn users of IC codes and PEM data when simulations may lead to unsupported conclusions, and provide estimates of uncertainties on figures of merit calculated by the simulations.

97 MATHEMATICS AND COMPUTING↗

Density weighted angular redshift fluctuations: a new cosmological observable

We propose the use of angular fluctuations in the galaxy redshift field as a new way to extract cosmological information in the Universe. This new probe $\delta z (\hat{\mathbf {n}})$ consists of the statistics of sky maps built by projecting redshifts under a Gaussian window of width σz centred upon a redshift zobs, and weighted by the galaxy density field. We compute the angular power spectrum of the $\delta z (\hat{\mathbf {n}})$ field in both numerical simulations and in linear perturbation theory. From these, we find that the $\delta z (\hat{\mathbf {n}})$ field (i) is sensitive to the underlying density and peculiar velocity fields; (ii) is highly correlated, at the $\gtrsim 60\, {{\ \rm per\ cent}}$ level, to the line-of-sight projected peculiar velocity field; (iii) for narrow windows (σz < 0.03), it is almost completely uncorrelated to the projected galaxy angular density field under the same redshift window; and (iv) it is largely unaffected by multiplicative and additive systematic errors on the observed number of galaxies that are redshift-independent over ~σz. We conclude that $\delta z (\hat{\mathbf {n}})$ is a simple and robust tomographic measure of the cosmic density and velocity fields, complementary to angular clustering, that will contribute to more complete exploitations of current and upcoming galaxy redshift surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Lepton flavor violation: From muon decays to muon colliders

We investigate the unique potential of a high-energy muon collider to probe lepton-flavor-violating signals arising from physics beyond the Standard Model (SM). Low-energy, precision searches for charged lepton flavor violation (LFV) are projected to dramatically improve their sensitivity in the coming years and could provide the first evidence of new physics. We interpret the sensitivity of these searches in terms of a set of LFV operators in the SM effective field theory. The same operators are then probed at the TeV scale via new, high-energy processes only available at a high-energy muon collider, such as 𝜇⁢𝜇 → 𝜇⁢𝜏 or the scattering of a muon of an electroweak gauge boson into LFV final states. We find that, for most operators, a muon collider could confirm signals if they are seen at future low-energy experiments, whereas for certain flavor combinations it extends the reach to scales well beyond those accessible at lower energies. We also project the sensitivity of a muon collider to lepton-flavor-violating decays of the SM Higgs boson and demonstrate improved sensitivity to ℎ → 𝑒⁢𝜏 and ℎ → 𝜇⁢𝜏 by an order of magnitude compared to the High-Luminosity LHC. The importance of having multiple, complementary probes is illustrated by considering both various combinations of operators and relative sizes of flavor-violating transitions between generations under various assumptions for the flavor structure of new physics.

Asadi, Pouya [University of California, Santa Cruz↗

Precision spectroscopy of nuclear decays using quantum optomechanical sensors

This project developed and demonstrated a fundamentally new way to detect individual nuclear decays: rather than capturing the energy that decay products deposit in a detector, we measure the tiny mechanical recoil of the entire micron- or nanometer-sized particle in which the decaying nucleus is embedded. Because momentum is conserved, this approach is sensitive even to neutral, weakly interacting particles, including neutrinos, that escape conventional detectors. During the award, the Yale group reported the first-ever mechanical detection of single nuclear decays, a result featured widely in the scientific press, and pushed the sensitivity of smaller levitated nanoparticles into the quantum measurement regime, reaching an impulse resolution within a factor of five of the fundamental Standard Quantum Limit (SQL), good enough in principle to detect the momentum kicked to the particle by a single emitted neutrino. In parallel, the LBNL group developed the theory of quantum-enhanced (sub-SQL) readout tailored to this experiment, showing how squeezed light can push the sensitivity below the SQL. Together these results establish levitated optomechanical sensors as a new tool for precision nuclear decay spectroscopy, with further applications in neutrino physics, quantum metrology, and nuclear forensics and safeguards.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Unraveling the CO Oxidation Mechanism over Highly Dispersed Pt Single Atom on Anatase TiO 2 (101)

Catalysts with noble metals deposited as single atoms on metal oxide supports have recently been studied extensively due to their maximized metal utilization and potential for performing difficult chemical conversions owing to their unique electronic properties. Understanding of the reaction mechanisms on supported single-metal atoms is still limited but is highly important for designing more efficient catalysts. In this study, we report the complexity of the CO oxidation reaction mechanism on Pt single atoms supported on anatase TiO 2 (Pt SA /a-TiO 2 ) by coupling density functional theory (DFT) calculations and microkinetic analysis with kinetic measurements, in situ/operando infrared, and X-ray absorption spectroscopies. Starting from the adsorbed Pt SA occupying an O vacancy induced by reductive pretreatment, we show that CO oxidation follows a complex mechanism consisting of initiation steps to reorganize the active site and multibranch reactive cycles, with the Pt SA /a-TiO 2 catalyst not returning to its initial configuration. The initiation step consists of CO and O 2 adsorption healing the O vacancy, followed by CO oxidation using gas-phase CO to form Pt(CO). The reactive cycle alternates O 2 adsorption and dissociation to oxidize the catalyst to Pt(O)(O)(CO) and branching pathways of competing Langmuir–Hinshelwood (LH)- or Eley–Rideal (ER)-type CO oxidation steps to reduce it again to Pt(CO). In situ/operando infrared experiments, including cryogenic CO adsorption and isotopic CO exchange, confirm the combined involvement of strongly adsorbed CO and gas-phase CO in an Eley–Rideal step along the reaction cycle. Microkinetic modeling shows that Pt single atoms are present in a mixture of Pt(CO), Pt(CO)(O 2 ), Pt(O)(CO)(O 2 ), and Pt(CO)(CO 3 ) structures as the main intermediates during steady-state CO oxidation, all having the C–O vibrational stretch close to the experimentally observed value of 2115 cm –1 . Microkinetic modeling also shows that the fractional orders of CO and O 2 measured experimentally originate from multiple steps with a high degree of rate control and not from a simple competitive adsorption. The results demonstrate the complex reaction pathways that even CO oxidation on a simple single-atom system can follow, providing mechanistic insights for designing efficient Pt-based single-atom catalysts. Here, we further show that microkinetic modeling results are sensitive to changes in energies of intermediate and transition states within errors of density functional theory, which can ultimately lead to incorrect conclusions regarding the reaction pathways and most abundant reaction intermediates if not accounted for by experiments.

36 MATERIALS SCIENCE↗

Moiré commensurability and the quantum anomalous Hall effect in twisted bilayer graphene on hexagonal boron nitride

The quantum anomalous Hall (QAH) effect is sometimes observed in twisted bilayer graphene (tBG) when it is nearly aligned with an encapsulating hexagonal boron nitride (hBN) layer. We propose that the appearance or absence of the QAH effect in individual devices could be related to commensurability between the graphene/graphene and graphene/hBN moiré patterns. We identify a series of points in the (θ GG , θ GBN ) twist-angle space at which the two moiré patterns are commensurate, allowing moiré band theory to be applied, and we show that the band Chern numbers are in this case sensitive to a rigid in-plane hBN displacement. Given this property, we argue that the QAH effect is likely only when (i) the (θ GG , θ GBN ) twist-angle-pair is close enough to a commensurate point that the two moiré patterns yield a supermoiré pattern with a sufficiently long length scale, and (ii) the supermoiré has a percolating topologically nontrivial QAH phase. For twist angles far from commensurability, the hBN layer acts as a source of disorder that can destroy the QAH effect. Our proposal can explain a number of current experimental observations. Finally, further experimental studies that can test this proposal more directly are suggested.

36 MATERIALS SCIENCE↗

Measurement of the properties of Higgs boson production at $\sqrt{s}$ = 13 TeV in the H → γγ channel using 139 fb -1 of pp collision data with the ATLAS experiment

Measurements of Higgs boson production cross-sections are carried out in the diphoton decay channel using 139 fb -1 of pp collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS experiment at the LHC. The analysis is based on the definition of 101 distinct signal regions using machine-learning techniques. The inclusive Higgs boson signal strength in the diphoton channel is measured to be $1.04^{+0.10}_{-0.09}$. Cross-sections for gluon-gluon fusion, vector-boson fusion, associated production with a W or Z boson, and top associated production processes are reported. An upper limit of 10 times the Standard Model prediction is set for the associated production process of a Higgs boson with a single top quark, which has a unique sensitivity to the sign of the top quark Yukawa coupling. Higgs boson production is further characterized through measurements of Simplified Template Cross-Sections (STXS). In total, cross-sections of 28 STXS regions are measured. The measured STXS cross-sections are compatible with their Standard Model predictions, with a p-value of 93%. The measurements are also used to set constraints on Higgs boson coupling strengths, as well as on new interactions beyond the Standard Model in an effective field theory approach. No significant deviations from the Standard Model predictions are observed in these measurements, which provide significant sensitivity improvements compared to the previous ATLAS results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗