Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “self”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Frequency up-conversion of a high-power microwave pulse propagating in a self-generated plasma

In the study of the propagation of a high-power microwave pulse, one of the main concerns is how to minimize the energy loss of the pulse before reaching the destination. A frequency autoconversion process that can lead to reflectionless propagation of powerful electromagnetic pulses in self-generated plasmas is studied. The theory shows that, under the proper condition, the carrier frequency omega of the pulse shifts upward during the growth of local plasma frequency omega(pe). Thus, the self-generated plasma remains underdense to the pulse. A chamber experiment to demonstrate the frequency autoconversion during the pulse propagation through the self-generated plasma is conducted. The detected frequency shift is compared with the theoretical result calculated by using the measured electron density distribution along the propagation path of the pulse. Good agreement is obtained.

Kuo, S. P.↗

Self-diffusion of magnesium in spinel and in equilibrium melts - Constraints on flash heating of silicates

An isotopic tracer is used to measure Mg self-diffusion in spinel and coexisting melt at bulk chemical equilibrium. The diffusion coefficients were calculated from the measured isotope profiles using a model that includes the complementary diffusion of Mg-24, Mg-25, and Mg-26 in both phases with the constraint that the Mg content of each phase is constant. The activation energy and preexponential factor for Mg self-diffusion in spinel are, respectively, 384 +/- 7 kJ and 74.6 +/- 1.1 sq cm/s. These data indicate Mg diffusion in spinel is much slower than previous estimates. The activation energy for Mg self-diffusion in coexisting melt is 343 +/- 25 kJ and the preexponential factor is 7791.9 +/- 1.3 sq cm/s. These results are used to evaluate cooling rates of plagioclase-olivine inclusions (POIs) in the Allende meteorite. Given a maximum melting temperature for POIs of about 1500 C, these results show that a 1-micron radius spinel would equilibrate isotopically with a melt within about 60 min.

Sheng, Y. J.↗

Design issues for a reinforcement-based self-learning fuzzy controller

Fuzzy logic controllers have some often cited advantages over conventional techniques such as PID control: easy implementation, its accommodation to natural language, the ability to cover wider range of operating conditions and others. One major obstacle that hinders its broader application is the lack of a systematic way to develop and modify its rules and as result the creation and modification of fuzzy rules often depends on try-error or pure experimentation. One of the proposed approaches to address this issue is self-learning fuzzy logic controllers (SFLC) that use reinforcement learning techniques to learn the desirability of states and to adjust the consequent part of fuzzy control rules accordingly. Due to the different dynamics of the controlled processes, the performance of self-learning fuzzy controller is highly contingent on the design. The design issue has not received sufficient attention. The issues related to the design of a SFLC for the application to chemical process are discussed and its performance is compared with that of PID and self-tuning fuzzy logic controller.

Yen, John↗

Properties of Extruded PS-212 Type Self-Lubricating Materials

Research has been underway at the NASA Lewis Research Center since the 1960's to develop high temperature, self-lubricating materials. The bulk of the research has been done in-house by a team of researchers from the Materials Division. A series of self-lubricating solid material systems has been developed over the years. One of the most promising is the composite material system referred to as PS-212 or PM-212. This material is a powder metallurgy product composed of metal bonded chromium carbide and two solid lubricating materials known to be self-lubricating over a wide temperature range. NASA feels this material has a wide potential in industrial applications. Simplified processing of this material would enhance its commercial potential. Processing changes have the potential to reduce processing costs, but tribological and physical properties must not be adversely affected. Extrusion processing has been employed in this investigation as a consolidation process for PM-212/PS-212. It has been successful in that high density bars of EX-212 (extruded PM-212) can readily be fabricated. Friction and strength data indicate these properties have been maintained or improved over the P.M. version. A range of extrusion temperatures have been investigated and tensile, friction, wear, and microstructural data have been obtained. Results indicate extrusion temperatures are not critical from a densification standpoint, but other properties are temperature dependent.

Waters, W. J.↗

Design issues of a reinforcement-based self-learning fuzzy controller for petrochemical process control

Fuzzy logic controllers have some often-cited advantages over conventional techniques such as PID control, including easier implementation, accommodation to natural language, and the ability to cover a wider range of operating conditions. One major obstacle that hinders the broader application of fuzzy logic controllers is the lack of a systematic way to develop and modify their rules; as a result the creation and modification of fuzzy rules often depends on trial and error or pure experimentation. One of the proposed approaches to address this issue is a self-learning fuzzy logic controller (SFLC) that uses reinforcement learning techniques to learn the desirability of states and to adjust the consequent part of its fuzzy control rules accordingly. Due to the different dynamics of the controlled processes, the performance of a self-learning fuzzy controller is highly contingent on its design. The design issue has not received sufficient attention. The issues related to the design of a SFLC for application to a petrochemical process are discussed, and its performance is compared with that of a PID and a self-tuning fuzzy logic controller.

Yen, John↗

A self-reconfigurable manipulator system with dextrous bracing structure

The authors present a dextrous bracing structure of a dual-arm system as a means of implementing a self-reconfigurable manipulator system. The dextrous bracing structure allows a dual-arm system to relocate the bracing point between two arms, select the type of contact as the bracing point, and lock or release the joints of individual arms. The self-reconfigurable dual-arm system is now capable of reconfiguring its topology through serial, parallel and bracing structures, supporting general types of contact, rigid or sliding, as well as locking or releasing some of its joints as needed. The focus is on an analysis of the effects of the dextrous bracing on the performance of a dual-arm system in terms of dual-arm manipulabilities and resistivities. The analysis shows that a self-reconfigurable dual-arm system with a dextrous bracing structure gives continuously varying performance characteristics ranging from serial to parallel structures.

Lee, Sukhan↗

Self-pumped phase conjugation and four-wave mixing in 0- and 45-deg-cut n-type BaTiO3:Co

Relatively fast self-pumped phase-conjugate and four-wave-mixing rise times are reported in n-type cobalt-doped barium titanate. With the crystal oriented in a 45-deg cut as compared with the same crystal in a 0-deg cut we find a factor of 3 decrease in the 0-90-percent rise time to 800 ms with 25-mW input power at 514.5 nm. Also, the self-pumped phase-conjugate reflectivity increases from 20 to 40 percent. We deduce that the phase conjugation is from internally seeded stimulated photorefractive backscattering. The four-wave-mixing rise time of the 45-deg-cut crystal is 4 ms with a reflectivity of 48 percent when the pumping beams are derived from self-pumped phase conjugation that has an input power of 25 mW.

Garrett, M. H.↗

Self-consistent models for triaxial galaxies with flat rotation curves - The disk case

We examine the possibility of constructing scale-free triaxial logarithmic potentials self-consistently, using Schwarzschild's linear programing method. In particular, we explore the limit of nonaxisymmetric disks. In this case it is possible to reduce the problem to the self-consistent reconstruction of the disk surface density on the unit circle, a considerably simpler problem than the usual 2D or 3D one. Models with surface densities of the form Sigma = (x exp n + (y/q) exp n) exp - 1/n with n = 2 or 4 are investigated. We show that the complicated shapes of the 'boxlet' orbit families (which replace the box orbit family found in potentials with smooth cores) limit the possibility of building self-consistent models, though elliptical disks of axis ratio above 0.7 and a restricted range of boxier models can be constructed. This result relies on using sufficiently fine bins, smaller than the 10 deg bins commonly used in 2D or 3D investigations. It also indicates the need for caution in interpreting N-body models of triaxial halos in which the core of the potential is numerically smoothed.

Kuijken, Konrad↗

Self-mode-locked chromium-doped forsterite laser generates 50-fs pulses

Stable transform-limited (delta nu-delta tau = 0.32) femtosecond pulses with a FWHM of 50 fs were generated from a self-mode-locked chromium-doped forsterite laser. The forsterite laser was synchronously pumped by a CW mode-locked Nd:YAG (82 MHz) laser that generated picosecond pulses (200-300 ps) and provided the starting mechanism for self-mode-locked operation. Maximum output power was 45 mW for 3.9 W of absorbed pumped power with the use of an output coupler with 1 percent transmission. The self-mode-locked forsterite laser was tuned from 1240 to 1270 nm.

Seas, A.↗

Self-replication of chemical systems based on recognition within a double or a triple helix - A realistic hypothesis

A scenario is proposed for the non-enzymatic self-replication of short RNA molecules. The self-replication of an oligopyrimidine strand is considered and the process of template-directed synthesis based on recognition within a double helix is discussed. Replication mechanisms are suggested for selected oligonucleotides. The mechanisms are based on Watson-Crick base pairing between complementary nucleotides as well as Hoogsteen base pairing between a duplex and the complementary third strand. It is suggested that self-replication based on these mechanisms may be accomplished but may result in a substantial amount of misinformation transfer when mixed oligonucleotides are used.

Kanavarioti, Anastassia↗

Self-consistent electrostatic potential due to trapped plasma in the magnetosphere

A steady state solution for the self-consistent electrostatic potential due to a plasma confined in a magnetic flux tube is considered. A steady state distribution function is constructed for the trapped particles from the constants of the motion, in the absence of waves and collisions. Using Liouville's theorem, the particle density along the geomagnetic field is determined and found to depend on the local magnetic field, self-consistent electric potential, and the equatorial plasma distribution function. A hot anisotropic magnetospheric plasma in steady state is modeled by a bi-Maxwellian at the equator. The self-consistent electric potential along the magnetic field is calculated assuming quasineutrality, and the potential drop is found to be approximately equal to the average kinetic energy of the equatorially trapped plasma. The potential is compared with that obtained by Alfven and Faelthammar (1963).

Miller, Ronald H.↗

Radiation-Protected Protocols For Self-Testing Of Microcircuits

Ionizing radiation need not trigger unintended self-testing. Protocols installed in certain microcircuits permitting functional self-testing do not consider possibility of inadvertent triggering by protons or energetic heavy ions in space or satellite orbit. Recommended devices be rendered immune to so-called single event effects of energetic ions in cosmic rays, flares, or trapped-charge belts surrounding Earth and some other planets. Proposed pair of stimuli be applied to device in specified manner to start self-test. Protocol can require two or more stimuli at single node, or pair of stimuli at two nodes, or some more complicated combination.

Nichols, Donald K.↗

Testing self-timed circuits using scan paths

Testing is an essential part of any digital system design and one that can be made much easier if testing is considered during the design process rather than after the system is complete. There are a number of techniques for integrating testability into system design, but many of these traditional testing methods used for synchronous circuits are not directly applicable to non-clocked asynchronous circuits. As a result, many asynchronous circuits do not employ design for testability techniques. A method of using the familiar model of scan paths modified to test self-timed systems are presented. Specifically, circuits designed using a library of self-timed modules to assemble systems with two-phase transition control and bundled data paths are considered. The method involves modifying these self-timed modules such that circuits designed from them have a built-in scan path.

Khoche, Ajay↗

A self-defining hierarchical data system

The Self-Defining Data System (SDS) is a system which allows the creation of self-defining hierarchical data structures in a form which allows the data to be moved between different machine architectures. Because the structures are self-defining they can be used for communication between independent modules in a distributed system. Unlike disk-based hierarchical data systems such as Starlink's HDS, SDS works entirely in memory and is very fast. Data structures are created and manipulated as internal dynamic structures in memory managed by SDS itself. A structure may then be exported into a caller supplied memory buffer in a defined external format. This structure can be written as a file or sent as a message to another machine. It remains static in structure until it is reimported into SDS. SDS is written in portable C and has been run on a number of different machine architectures. Structures are portable between machines with SDS looking after conversion of byte order, floating point format, and alignment. A Fortran callable version is also available for some machines.

Bailey, J.↗

State-space self-tuner for on-line adaptive control

Dynamic systems, such as flight vehicles, satellites and space stations, operating in real environments, constantly face parameter and/or structural variations owing to nonlinear behavior of actuators, failure of sensors, changes in operating conditions, disturbances acting on the system, etc. In the past three decades, adaptive control has been shown to be effective in dealing with dynamic systems in the presence of parameter uncertainties, structural perturbations, random disturbances and environmental variations. Among the existing adaptive control methodologies, the state-space self-tuning control methods, initially proposed by us, are shown to be effective in designing advanced adaptive controllers for multivariable systems. In our approaches, we have embedded the standard Kalman state-estimation algorithm into an online parameter estimation algorithm. Thus, the advanced state-feedback controllers can be easily established for digital adaptive control of continuous-time stochastic multivariable systems. A state-space self-tuner for a general multivariable stochastic system has been developed and successfully applied to the space station for on-line adaptive control. Also, a technique for multistage design of an optimal momentum management controller for the space station has been developed and reported in. Moreover, we have successfully developed various digital redesign techniques which can convert a continuous-time controller to an equivalent digital controller. As a result, the expensive and unreliable continuous-time controller can be implemented using low-cost and high performance microprocessors. Recently, we have developed a new hybrid state-space self tuner using a new dual-rate sampling scheme for on-line adaptive control of continuous-time uncertain systems.

Shieh, L. S.↗

Relativistic induced Compton scattering in synchrotron self-absorbed sources

We present a model of the radio emission from synchrotron self-absorbed sources, including the effects of induced Compton scattering by the relativistic electrons in the source. Order of magnitude estimates show that stimulated scattering becomes the dominant absorption process when (kT(sub B)/m(sub e) c(exp 2))Tau(sub T) greater than or approximately 1.0. Numerical simulations demonstrate that relativistic induced Compton scattering limits the brightness temperature of a self-absorbed synchroton sources to T(sub B) less than or approximately 2 x 10(exp 11) nu(exp -1/p + 3) (sub zero, 9) gamma(exp p + 2/p + 5) (sub min) K, where gamma(sub min) is the low-energy cutoff to the relativistic electron distribution with a power-law index of p. It can also significantly flatten the radio spectrum. The radio spectrum of the core of 3C 279 is well matched by a model in which stimulated scattering is important, and the additional constraint T(sub B) less than 2 x 10(exp 11)K may be important to the interpretation of the broadband spectra in variable extragalactic compact radio sources. Stimulated scattering reduces the amplitude of the radio frequency variability relative to the X-ray variability, an effect which can be detected by multiwavelength variability studies. Data for a sample of resolved compact radio cores indicate that it is inconsistent to neglect induced Compton scattering when inferring the physical parameters of the sources. The necessary generalizations to the standard synchrotron self-Compton theory are p resented.

Sincell, Mark W.↗

A novel computational method to simulate non-enzymatic self-replication

Non-enzymatic, template-directed synthesis of oligonucleotides has been extensively studied in the laboratory as a model to understand the kind of chemical processes that might have contributed to the origin of life on Earth. Several oligonucleotides have been shown to catalyze the synthesis of their complements from activated mononucleotides; however, a restricted number of them have been found to self-replicate. Recently we developed an efficient modified cellular automata method that supports the study of self-replicating oligonucleotides. With this method the oligonucleotide molecules are represented as active cells imbedded in a two-dimensional array of inactive cells symbolizing the environment. Random movements and probability-governed chemical reactions occurring in a cellular space can effectively simulate the experimental behavior observed in self-directed replication of oligonucleotides.

Navarro-Gonzalez, Rafael↗

Using FU Orionis outbursts to constrain self-regulated protostellar disk models

One-dimensional, convective, vertical structure models and one dimensional time-dependent, radial diffusion models are combined to create a self-consistent picture in which FU Orionis outbursts occur in young stellar objects (YSOs) as the result of a large-scale, self-regulated, thermal ionization instability in the surrounding protostellar accretion disk. Although active accretion disks have long been postulated to be ubiqitous among low-mass YSOs, few constraints have until now been imposed on physical conditions in these disks. By fitting the results of time-dependent disk models to observed timescales of FU Orionis events, we estimate the magnitude of the effective viscous stress in the inner disk (r approximately less than 1 AU) to be, in accordance with an ad hoc 'alpha' prescription, the product of the local sound speed, pressure scale height, and an efficiency factor alpha of 10(exp -4) where hydrogen is neutral and 10(exp 3) where hydrogen is ionized. We hypothesize that all YSOs receive infall onto their outer disks which is steady (or slowly declining with time) and that FU Orionis outbursts are self-regulated, disk outbursts which occur only in systems which transport matter inward at a rate sufficiently high to cause hydrogen to be ionized in the inner disk. We estimate a critical mass flux of dm(sub crit)/dt = 5 x 10(exp 7) solar mass/yr independent of the magnitude of alpha for systems with one solar mass, three solar radius central objects. Infall accretion rates in the range of dm(sub in)/dt = 1-10) x 10(exp -6) solar mass/yr produce observed FU Orionis timescales consistent with estimates of spherical molecular cloud core collapse rates. Modeled ionization fronts are typically initiated near the inner edge of the disk and propogate out to a distance of several tens of stellar radii. Beyond this region, the disk transports mass steadily inward at the supplied constant infall rate. Mass flowing through the innermost disk annulus is equal to dm(sub in)/dt only in a time-averaged sense and is regulated by the ionization of hydrogen in the inner disk such that long intervals (approximately 1000 yr) of low-mass flux: (1-30) x 10(exp -8) solar mass/yr are punctuated by short intervals (approximately 100 yr) of high-mass flux: (1-30) x 10(exp -5) solar mass/yr. Timescales and mass fluxes derived for quiescent and outburst stages are consistent with estimates from observations of T Tauri and FU Orionis systems, respectively.

Bell, K. R.↗