Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismic source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Event Location using Arrival Times from Seismic and Acoustic Phenomena

Accurately locating seismoacoustic sources with geophysical observations helps to monitor natural and anthropogenic phenomena. Sparsely deployed infrasound arrays can readily locate large sources thousands of kms away, but small events typically produce signals observable at only local to regional distances. At such distances, accurate location efforts rely on observations across smaller regional or temporary deployments which often consist of single-channel infrasound sensors that cannot record direction of arrival. Event locations can also be aided by inclusion of ground coupled airwaves (GCA). This study demonstrates how we can robustly locate a catalog of seismoacoustic events using infrasound, GCA, and seismic arrival times at local to near-regional distances. We employ a probabilistic location framework using simplified forward models. Our results indicate that both single-channel infrasound and GCA arrival times can provide accurate estimates of event location in the absence of array-based observations even when using simple models. However, one must carefully choose model uncertainty bounds to avoid underestimation of confidence intervals.

58 GEOSCIENCES↗
DOE OSTI2021

Using Dense Array Waveform Correlations to Build a Velocity Model with Stochastic Variability

In an ongoing effort to improve 3D seismic-wave propagation modeling for frequencies up to 10 Hz, we used cross correlations between vertical-component waveforms from an underground chemical explosion to estimate the statistical properties of small-scale velocity heterogeneities. The waveforms were recorded by a dense 2D seismic array deployed during the Source Physics Experiments for event number 5 (SPE-5) in a series of six underground chemical explosions, conducted at the Nevada National Security Site. The array consisted of 996 geophones with a 50–100 m grid spacing, deployed at the SPE site at the north end of the Yucca Flat basin. The SPE were conducted to investigate the generation and propagation of seismic and acoustic waves from underground explosions. Comparisons of decay rates of waveform cross correlations as function of interstation distance, computed for observed and synthetic seismograms from the SPE-5 chemical explosion, were used to constrain statistical properties of correlated stochastic velocity perturbations representing small-scale heterogeneities added to a geology-based velocity model of the Yucca Flat basin. Using comparisons between recorded and simulated waveform cross correlations, we were able to recover sets of statistical properties of small-scale velocity perturbations in the velocity model that produce the best-fit between the recorded and simulated ground motion. The stochastic velocity fluctuations in the velocity model that produced the smallest misfits have a horizontal correlation distance of between 400 and 800 m, a vertical correlation distance between 100 and 200 m, and a standard deviation of 10% from the nominal model velocity in the alluvium basin layers. They also have a horizontal correlation distance of 1000 m, a vertical correlation distance of 250 m, and a standard deviation of 6% in the underlying and consolidated sedimentary layers, up to a depth of 4 km. Comparisons between observed and simulated wavefields were used to assess the proposed small-scale heterogeneity enhancements to the Yucca Flat basin model. We found that adding a depth-resolved stochastic variability to the geology-based velocity model improves the overall performance of ground-motion simulations of an SPE-5 explosion in the modeled frequency range up to 10 Hz. The results may be applicable to other similar basins.

58 GEOSCIENCES↗
DOE OSTI2020

Using onset times from frequent seismic surveys to understand fluid flow at the Peace River Field, Canada

With our limited knowledge of the relationship between changes in the state of an aquifer or reservoir and the corresponding changes in the elastic moduli, that is the rock physics model, hampers the effective use of time-lapse seismic observations for estimating flow properties within the Earth. A central problem is the complicated dependence of the magnitude of time-lapse changes on the saturation, pressure, and temperature changes within an aquifer or reservoir. We describe an inversion methodology for reservoir characterization that uses onset times, the calendar time of the change in seismic attributes, rather than the magnitude of the changes. We find that onset times are much less sensitive than magnitudes to the rock physics model used to relate time-lapse observations to changes in saturation, temperature and fluid pressure. We apply the inversion scheme to observations from daily monitoring of enhanced oil recovery at the Peace River field in Canada. An array of 1492 buried hydrophones record seismic signals from 49 buried sources. Time-shifts for elastic waves traversing the reservoir are extracted from the daily time-lapse cubes. In our analysis 175 images of time-shifts are transformed into a single map of onset times, leading to a substantial reduction in the volume of data. These observations are used in conjunction with bottom hole pressure data to infer the initial conditions prior to the injection, and to update the reservoir permeability model. The combination of a global and local inversion scheme produces a collection of reservoir models that are best described by three clusters. The updated model leads to a nearly 70 percent reduction in seismic data misfit. The final set of solutions successfully predict the observed normalized pressure history during the soak and flow-back into the wells between 82 and 175 days into the cyclic steaming operation.

58 GEOSCIENCES↗
DOE OSTI2026

Limited Dynamic Earthquake Triggering in Nevada

Dynamic triggering occurs when seismic waves from distant large earthquakes temporarily alter stress conditions along faults, potentially triggering new earthquakes hundreds to thousands of kilometers away from the source. Previous studies have linked triggered seismicity to anthropogenic activities such as geothermal, oil, and gas production. Although these activities are present in Nevada, little work has been conducted to explore dynamically triggered seismicity in Nevada. Here, we analyze a newly published, high-resolution earthquake catalog for Nevada to identify local seismicity dynamically triggered by teleseismic events (Mw≥7) from 2008 to 2023. We identify 94 dynamically triggered earthquakes concentrated in four distinct regions, which qualitatively show a modest positive correlation with geothermal well locations. Triggered seismicity in Nevada is predominantly delayed, with some instantaneously triggered by Rayleigh waves. The prevalence of delayed triggering indicates that pore fluid interactions may play a critical role in controlling dynamic triggering susceptibility in Nevada. Our results demonstrate that dynamic triggering can provide valuable insight to help identify critically stressed regions.

58 GEOSCIENCES↗
DOE OSTI2022

Estimating SHmax azimuth with P sources and vertical geophones: Use P-P reflection amplitudes or use SV-P reflection times?

We compared two methods for extracting the azimuth of maximum horizontal stress (SHmax) from 3D land-based seismic data generated by a P source and recorded with vertical geophones. In the first method, we used the direct-SV mode that is produced by all land-based P sources. P sources generate SV illumination that radiates in all azimuth directions from a source station and creates SV-P reflections that are recorded by vertical geophones. Unless stratigraphy has steep dip, SV-P raypaths recorded by vertical geophones are the reverse of P-SV raypaths recorded by horizontal geophones. Thus, SV-P data provide the same S-wave sensitivity to stress fields as popular P-SV data do. In the second method, we retrieved P-P reflections and then performed an amplitude-variation-with-azimuth (AVA) analysis of the amplitude-gradient behavior of P-P reflection wavelets. We did this analysis in narrow azimuth corridors to determine the gradient of reflection-wavelet amplitudes as a function of azimuth. This P-P AVA amplitude-gradient method has been of great interest in the reflection seismology community since it was introduced in the late 1990s. Each of these methods, AVA analysis of the gradient of P-P reflection amplitudes and azimuth-dependent arrival times of SV-P reflections, can be used to determine the azimuth of SHmax stress. We compare the results of the two methods with ground truth measurements of SHmax azimuth at a CO 2 sequestration site in the Michigan Basin. SHmax azimuths were determined from P-P and SV-P data at three major boundaries at depths of approximately 3500 ft (1067 m), 5500 ft (1676 m), and 7500 ft (2286 m). Two estimates of SHmax azimuth (one using SV-P data and one using P-P data) were made at each stacking bin inside a 24 mi 2 (62 km 2 ) image space. The result was approximately 98,000 estimates of SHmax azimuth across each of these three boundaries for each of these two prediction strategies. Histogram displays of PP AVA gradient estimates had peaks at correct azimuths of SHmax at all three depths, but the spread of the distributions widened with depth and split into two peaks at the deepest boundary. In contrast, each histogram of SHmax azimuth predicted by azimuth-dependent SV-P traveltimes had a single, definitive peak that was positioned at the correct SHmax azimuth at all three boundary depths.

Geochemistry & Geophysics↗
DOE OSTI2020

Generating Uncertainty Distributions for Seismic Signal Onset Times

Signal arrival-time estimation plays a critical role in a variety of downstream seismic analyses, including location estimation and source characterization. Any arrival-time errors propagate through subsequent data-processing results. In this article, we detail a general framework for refining estimated seismic signal arrival times along with full estimation of their associated uncertainty. Using the standard short-term average/long-term average threshold algorithm to identify a search window, we demonstrate how to refine the pick estimate through two different approaches. In both cases, new waveform realizations are generated through bootstrap algorithms to produce full a posteriori estimates of uncertainty of onset arrival time of the seismic signal. The onset arrival uncertainty estimates provide additional data-derived information from the signal and have the potential to influence seismic analysis along several fronts.

58 GEOSCIENCES↗
DOE OSTI2022

Time domain probabilistic seismic risk analysis using ground motion prediction equations of Fourier amplitude spectra

Modeling of Fourier amplitude spectra (FAS) of seismic motions has gained much attention in engineering seismology. In the past few years, several ground motion prediction equations (GMPEs) and inter-frequency correlation structure of FAS have been established. Due to many preferable characteristics of FAS, probabilistic seismic hazard/risk analysis is rapidly changing from ergodic, spectrum acceleration Sa(T 0 )-based approach to non-ergodic, site-specific, FAS-based approach. This paper presents time domain intrusive framework for probabilistic seismic risk analysis using GMPE of FAS. Herein, methodology for time domain stochastic ground motion modeling based on GMPEs of FAS is presented in some detail. The simulated uncertain motions are modeled as a random process and represented by polynomial chaos Karhunen-Loève expansion. The random process excitations are further propagated into the uncertain structural system using Galerkin stochastic finite element method (SFEM). Probabilistic evolution of structural response is solved, and such solution is used to develop seismic risk for any damage state. The presented framework is illustrated through seismic risk analysis of a four-story building subjected to possible earthquakes from two strike slip faults. The influences of the epistemic uncertainties in source stress drop Δσ and site attenuation κ0 on seismic risk are investigated. The need for non-ergodic seismic risk analysis with source-specific and site specific characterizations is emphasized.

58 GEOSCIENCES↗
DOE OSTI2022

Operational Forecasting of Induced Seismicity

Operational Forecasting of Induced Seismicity (ORION) is an open-source toolkit developed as part of the US Department of Energy SMART and NRAP programs. ORION is designed to help both expert and non-expert users understand the seismic hazard at a site. This tool analyzes how the seismic hazard evolves during injection of fluid, and can be used to identify potential mitigation strategies for observed or forecasted seismic activity. ORION is built using Python, and has an optional GUI where users can easily configure model parameters, evaluate temporal and spatial forecasts, and inspect key data (seismicity, fluid injection, pressure models, etc.).

Kroll, Kayla↗
DOE OSTI2022

CarbonSAFE Illinois (Macon County Final Report)

This report summarizes an extensive work package to present key activities and findings towards evaluating sites for geologic storage of CO 2 . The project was undertaken as a series of tasks that addressed risk, stakeholder engagement, business and economic issues, permitting, drilling and well testing, geologic characterization, seismic surveys, modeling, CO 2 source suitability and infrastructure development. Detailed reports associated with these tasks are included as appendices to this report.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Elastic Stochastic Full Waveform Inversion (eSFWI)

This collaboration between Lawrence Livermore National Security, LLC (LLNS) as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Chevron USA Inc., acting through its Chevron Technical Center division, aimed at developing next-generation computational methods for the Elastic Stochastic Full Waveform Inversion (eSFWI). Seismic imaging is heavily used in the oil and gas industry for identifying and operating subsurface reservoirs. Improved seismic imaging methods can improve productivity, lower costs, and improve operational and environmental safety. This CRADA demonstrated that new high-performance computing (HPC) architectures being rolled out over the next five years can enable unprecedented seismic imaging resolution when using eSFWI techniques to process active seismic data. An open-source computational mini-application was developed, capable of demonstrating near-peak performance for eSFWI algorithms on CPU and GPU enabled HPC platforms. Performance was demonstrated on LLNL HPC systems such as Lassen, as well as on Chevron systems. This project benefited Chevron USA Inc. by demonstrating the potential computational efficiency of their full waveform inversion capabilities used to characterize oil/gas reservoirs, which in turn benefits the public through potential increases in capabilities to perform analysis of leasing sites.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2025

Bayesian Inference for the Seismic Moment Tensor Using Regional Waveforms and Teleseismic- P Polarities with a Data-Derived Distribution of Velocity Models and Source Locations

The largest source of uncertainty in any source inversion is the velocity model used in the transfer function that relates observed ground motion to the seismic moment tensor. However, standard inverse procedure often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. Here, we incorporate this uncertainty into an estimation of the seismic moment tensor using a data-derived distribution of velocity models based on complementary geophysical data sets, including thickness constraints, velocity profiles, gravity data, surface-wave group velocities, and regional body-wave travel times. The data-derived distribution of velocity models is then used as a prior distribution of Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional and teleseismic-P waveforms. The use of multiple data sets is important for gaining resolution to different components of the moment tensor. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and interpreted in terms of the most probable source type.

58 GEOSCIENCES↗
DOE OSTI2026

Seismic Observations of the OSIRIS-REx Sample Return Capsule Reentry: Deployment, Signal Characteristics, and Wavefield Phenomenology

Controlled spacecraft reentries from interplanetary trajectories provide rare, well-characterized hypersonic sources for advancing seismoacoustic observation techniques. Here we present seismic observations of the OSIRIS-REx sample return capsule (SRC) reentry on 24 September 2023, recorded by 16 three-component nodal seismometers deployed near Eureka, Nevada, at ground distances of 7–20 km from the capsule trajectory. Air-to-ground coupled signals are detected at all stations, exhibiting impulsive onsets consistent with ballistic shock arrivals from the descending Mach cone. We characterize the seismic wavefield through signal amplitude, period, waveform cross-correlation, and array processing. Signal periods decrease systematically with increasing distance from the trajectory within the airport array, indicating that higher-frequency content becomes more prominent at greater offsets, opposite to expectations from geometric spreading and atmospheric absorption. Seismic array processing identifies frequency-dependent back-azimuth variations whose origin remains unresolved; possible contributing factors include source geometry, scattering by fine-scale layered structure in the stratosphere, and near-surface effects. These observations document a spatially complex seismic wavefield from a well-characterized hypersonic line source and provide constraints for future modeling of atmospheric propagation and air-to-ground coupling.

OSIRIS-REx↗
DOE OSTI2025

Cardinal: Seismic and Geoacoustic Array Processing

Data collected via seismic and infrasound array deployments are leveraged in the geosciences to detect and characterize a myriad of natural and anthropogenic sources. These deployments consist of numerous sensors placed in a predetermined configuration to amplify signal strength and improve the efficacy of array processing techniques used to measure signal directionality and waveform coherence. High‐fidelity feature extraction is often predicated on interstation distance as well as the frequency content and wavelength of an incident signal. Numerous array processing softwares analyze data in sequential frequency bands to obtain a more detailed characterization of a signal. However, current algorithms are limited in their ability to determine optimal array configuration for each band. We introduce an open‐source Python code, called Cardinal, to process seismic and infrasound array data in discretized time–frequency space with the option of applying an adaptive array design to determine optimal subarray configuration for each frequency band. To reduce computational time, the array processing step can be run in parallel using multithreading. Furthermore, the software has the capability to aggregate array processing results from different time–frequency pixels to produce separate sets of detections, or families, with added utility via the application of an adaptive semblance threshold, which aids in isolating signals‐of‐interest from coherent background noise. Upon appropriate configuration, Cardinal exhibits the potential to combine distinct seismic and infrasound phases into separate families.

Adaptive Array↗
DOE OSTI2021

Seismic isolation: A pathway to standardized advanced nuclear reactors

Standardizing advanced nuclear reactors is a pathway to substantially reducing their overnight capital cost and achieving parity with other power sources, including renewables and fossil fuels. The seismic load case has thwarted standardization of nuclear power plants because site-specific seismic hazard and local near-surface geology has triggered soil-structure-interaction analysis, design, equipment qualification, regulatory review, and licensing, ensuring that each build is different. To achieve standardized or site-independent certified advanced reactor designs, the impact of the seismic load case on the engineering and construction cost and time must be substantially mitigated. Seismic isolation is a mature technology that has been used for more than 30 years in non-nuclear sectors to substantially reduce earthquake demands in buildings and other infrastructure. In this paper, seismic isolation is used to enable standardization of advanced reactor designs, aimed at the complete re-use of a site-independent, certified design and repeated procurement of safety-class equipment. A pathway to standardized designs using seismic isolation is demonstrated for two fundamentally different advanced reactors: a molten salt reactor and a high temperature gas reactor. Each reactor building is equipped with three specialized pieces of safety-class equipment, namely, a reactor vessel, a steam generator, and a control rod drive mechanism housing that is attached to the reactor head. Analysis is performed per ASCE and ASME standards to design the buildings and the equipment for two base conditions: conventional (fixed base) and base isolated. The impact of the seismic load case is characterized for the reinforced concrete walls in the buildings and for the equipment, measured using vessel wall thickness and horizontal accelerations. Here the analysis results show that the fixed-base buildings, designed for a site of low seismic hazard (peak ground acceleration, PGA = 0.15 g) could be constructed at a site of much greater seismic hazard (PGA = 0.7 g) if seismic base isolation is employed. Importantly, the scope of the site-specific analysis, design, and qualification would be limited to the seismic isolators and the isolated substructure, drastically reducing plant-specific engineering, review, and licensing, and time to construction start. Regulatory challenges and opportunities with standardized reactor designs are identified.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

ORION: Operational FoRecastIng Of INduced Seismicity

The Operational Forecasting of Induced Seismicity toolkit “ORION” (ORION) is an open-source, observation-based ensemble forecasting toolkit which is geared towards helping operators understand the seismic hazard (i.e., probabilistic assessment of the magnitude and frequency of induced seismic events) at a site. ORION analyzes how the seismic hazard evolves during injection and suggests possible mitigation strategies to employ if an earthquake that exceeds certain threshold is observed. Through its ensemble modeling approach, ORION leverages the benefits of statistical-, physics-, and machine learning-based forecasting methodologies, while reducing the impact of each model’s respective limitations. The ORION toolkit consists of an easy-to-use GUI interface that affords a user as much or as little interaction as desired. Advanced capabilities allow the user to upload local, high-precision earthquake catalogs, projected injection profiles and/or spatiotemporal estimates of pressure/stress, and to tune various model parameters. ORION will then provide a spatial and temporal ensemble forecast of seismicity defined as the probability of exceedance of a given earthquake magnitude over a forecast period. Additionally, ORION will provide probability distribution of the statistically derived maximum possible earthquake magnitude that may be expected. Finally, ORION will provide suggested operational management strategies (e.g. reduce injection volumes at specific wells) based on the level of hazard.

NRAP,NRAP Tools,ORION,Operational Forcasting of In↗
DOE OSTI2021

Source Separation and Medium Change of Contained Chemical Explosions from Coda Wave Interferometry

Differences in the seismic coda of neighboring events can be used to investigate source location offsets and medium change with coda wave interferometry (CWI). We employ CWI to infer the known relative location between two chemical explosions in Phase I of the Source Physics Experiment (SPE). The inferred displacement between the first, SPE-1, and second, SPE-2, chemical explosion is between 6 and 18 m, with an expectation of 9.2 m, where the known separation is close to 9.4 m. We also employ CWI to find any velocity perturbation due to damage from SPE-2, by comparing its coda with the collocated third SPE chemical explosion, SPE-3. We find that damage due to SPE-2 must be confined to a spherical region with radius less than 10 m and velocity perturbation less than 25%.

58 GEOSCIENCES↗
DOE OSTI2025

Shear-Wave Radiation Patterns from Explosive and Earthquake Sources in Scattering, Heterogeneous Media

Distinguishing whether a seismic event is an earthquake or an explosion is a core problem in explosion monitoring. For simplistic models, earthquakes produce a predictable S-wavefield based on their radiation pattern, while an explosion produces no S-wavefield. However, observations from nuclear tests show that explosions can produce significant S-wave energy on both horizontal components. We perform numerical experiments using SPECFEM to constrain when an S-wavefield generated from an explosion might differ from one produced by an earthquake. We generate the S-wavefield for our explosions by placing the source location within a small region consisting of large velocity heterogeneities. For the 2D cases investigated here, a crucial condition is that the size of the region of heterogeneities must be much smaller (approximately 1/12th) than the minimum wavelength of the wavefield for our simulation setups. We investigate both isotropic heterogeneities and anisotropic heterogeneities. Initial results demonstrate that the heterogeneous region lowers the P/S amplitude ratios of an explosion. The presence of strong anisotropic heterogeneities near the source can also produce an S-wavefield with similar amplitudes to the P-wavefield. Lastly, we show that S-wave polarization angles vary as a function of azimuth and distance for explosive sources in the presence of small-scale heterogeneities.

58 GEOSCIENCES↗
DOE OSTI2020

Source Discretization Near Curvilinear Mesh Refinements in One Dimeions (Summer Internship Final Report)

Lawrence Livermore National Lab developed the seismic wave code SW4 for earthquake simulations, and has recently added the ability to specify mesh-refinement interfaces in the curvilinear mesh. The primary purpose of this is to allow for high resolution near the surface, with relatively fewer total points in the mesh leading to shorter computation time. Presently, the code does not allow for point-source forcing terms (commonly used in seismic simulations) to be located near these curvilinear mesh refinement interfaces. The goal of this internship was to investigate the discretization of point-source forcing terms in the seismic wave equation when the sources are located near the interfaces between two curvilinear meshes. Ultimately this will be incorporated into SW4 to allow for more realistic simulations to be carried out in this faster implementation.

97 MATHEMATICS AND COMPUTING↗