Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Passive seismic experiment - A summary of current status

The data set obtained from the four-station Apollo seismic network including signals from approximately 11,800 events, is surveyed. Some refinement of the lunar model will result, but its gross features remain the same. Attention is given to the question of a small, molten lunar core, the answer to which remains dependent on analysis of signals from a far side impact. Seventy three sources of repeating, deep moonquakes have been identified, thirty nine of which have been accurately located. Concentrated at depths from 800 to 1000 km, the periodicities of these events have led to the hypothesis that they are generated by tidal stresses. Lunar seismic data has also indicated that the meteoroid population is ten times lower than originally determined from earth based observations. Lunar seismic activity is much lower and mountainous masses show no sign of sinking, in contrast to earth, as a result of the lunar crust being four times thicker. While much work remains to be done, significant correlation between terrestrial and lunar observations can be seen.

Latham, G. V.↗

Geophysical inferences of thermal-chemical structures in the lower mantle

Lateral variations of the temperature field in the lower mantle have been reconstructed using new results in mineral physics and seismic tomographic data. We show that, with the application of high-pressure experimental values of thermal expansivity and of sound velocities, the slow seismic anomalies in the lower mantle under the Pacific and Africa can be converted into realistic-looking plume structures with large dimensions of 0(1000 km). The outer fringes of the plumes have an excess temperature of around 400 K. In the core of the plumes are found tonguelike structures with extremely high thermal anomalies. These values can exceed 1200 K and are too high to be explained on the basis of thermal anomalies alone. We suggest that these major plumes in the deep mantle may be driven by both thermal and chemical buoyancies or that enhanced conductive heat-transfer may be important there.

Yuen, D. A.↗

A model of convergent plate margins based on the recent tectonics of Shikoku, Japan

A viscoelastic finite element plate tectonic model is applied to displacement data for the island of Shikoku, Japan. The flow properties and geometry of the upper portions of the earth are assumed known from geophysical evidence, and the loading characteristics are determined from the model. The nature of the forces acting on the Philippine Sea plate, particularly in the vicinity of the Nankai trough, is determined. Seismic displacement data related to the 1946 Nankaido earthquake are modeled in terms of a thick elastic plate overlying a fluidlike substratum. The sequence of preseismic and seismic displacements can be explained in terms of two independent processes operating on elastic lithospheric plates: a strain accumulation process caused by vertical downward forces acting on or within the lithosphere in the vicinity of the trench, and a strain release process caused by plate failure along a preexisting zone on weakness. This is a restatement of Reid's elastic rebound theory in terms of elastic lithospheric plates.

Bischke, R. E.↗

Lunar near-surface structure

Seismic refraction data obtained at the Apollo 14, 16, and 17 landing sites permit a compressional wave velocity profile of the lunar near surface to be derived. Beneath the regolith at the Apollo 14 Fra Mauro site and the Apollo 16 Descartes site is material with a seismic velocity of about 300 m/sec, believed to be brecciated material or impact-derived debris. Considerable detail is known about the velocity structure at the Apollo 17 Taurus-Littrow site. Seismic velocities of 100, 327, 495, 960, and 4700 m/sec are observed. The depth to the top of the 4700-m/sec material is 1385 m, compatible with gravity estimates for the thickness of mare basaltic flows, which fill the Taurus-Littrow valley. The observed magnitude of the velocity change with depth and the implied steep velocity-depth gradient of more than 2 km/sec/km are much larger than have been observed on compaction experiments on granular materials and preclude simple cold compaction of a fine-grained rock powder to thicknesses of the order of kilometers.

Cooper, M. R.↗

Plate tectonics and crustal deformation around the Japanese Islands

We analyze over a century of geodetic data to study crustal deformation and plate motion around the Japanese Islands, using the block-fault model for crustal deformation developed by Matsu'ura et al. (1986). We model the area including the Japanese Islands with 19 crustal blocks and 104 faults based on the distribution of active faults and seismicity. Geodetic data are used to obtain block motions and average slip rates of faults. This geodetic model predicts that the Pacific plate moves N deg 69 +/- 2 deg W at about 80 +/- 3 mm/yr relative to the Eurasian plate which is much lower than that predicted in geologic models. Substantial aseismic slip occurs on the subduction boundaries. The block containing the Izu Peninsula may be separated from the rigid part of the Philippine Sea plate. The faults on the coast of Japan Sea and the western part of the Median Tectonic Line have slip rates exceeding 4 mm/yr, while the Fossa Magna does not play an important role in the tectonics of the central Japan. The geodetic model requires the division of northeastern Japan, contrary to the hypothesis that northeastern Japan is a part of the North American plate. Owing to rapid convergence, the seismic risk in the Nankai trough may be larger than that of the Tokai gap.

Hashimoto, Manabu↗

Kinematics of a large-scale intraplate extending lithosphere: The Basin-Range

Upper lithospheric structure of the Cordilleran Basin Range (B-R) is characterised by an E-W symmetry of velocity layering. The crust is 25 km thick on its eastern active margin, thickening to 30 km within the central portion and thinning to approx. 25 km on the west. Pn velocities of 7.8 to 7.9 km/s characterize the upper mantle low velocity cushion, 7.4 km/s to 7.5 km/s, occurs at a depth of approx. 25 km in the eastern B-R and underlies the area of active extension. An upper-crustal low-velocity zone in the eastern B-R shows a marked P-wave velocity inversion of 7% at depths of 7 to 10 km also in the area of greatest extension. The seismic velocity models for this region of intraplate extension suggest major differences from that of a normal, thermally underformed continental lithosphere. Interpretations of seismic reflection data demonstrate the presence of extensive low-angle reflections in the upper-crust of the eastern B-R at depths from near-surface to 7 to 10 km. These reflections have been interpreted to represent low-angle normal fault detachments or reactivated thrusts. Seismic profiles across steeply-dipping normal faults in unconsolidated sediments show reflections from both planar to downward flatening (listric) faults that in most cases do not penetrate the low-angle detachments. These faults are interpreted as late Cenozoic and cataclastic mylonitic zones of shear displacement.

Smith, R. B.↗

Characterization of the Marquez Dome buried impact crater using gravity and magnetic data

The buried impact crater, Marquez Dome, located in Leon County in east central Texas, is an approximately 15 km diameter structure whose central uplift is now partially exposed due to headward erosion of the post-impact cover. The central uplift is approximately 3 km in diameter and the rocks within it have been uplifted more than 1200 m above their regional level. The crater rim remains buried and previous attempts to determine its location have had to rely on seismic reflection data and geologic well logs. These attempts have been somewhat successful in mapping the extent of the disturbed zone around Marquez Dome, but more limited in their ability to image the shallow buried rim. In an attempt to define accurately the whole Marquez Dome structure and assist in the selection of drilling sites, a geophysical investigation involving gravity and magnetic data over the central uplift and the surrounding area has been undertaken.

Wong, A. M.↗

Study of gravity and magnetic anomalies using MAGSAT data

The results of modeling satellite-elevation magnetic and gravity data using the constraints imposed by near surface data and seismic evidence shows that the magnetic minimum can be accounted for by either an intracrustal lithologic variation or by an upwarp of the Curie point isotherm. The long wavelength anomalies of the NOO's-vector magnetic survey of the conterminous U.S. were contoured and processed by various frequency filters to enhance particular characteristics. A preliminary inversion of the data was completed and the anomaly field calculated at 450 km from the equivalent magnet sources to compare with the POGO satellite data. Considerable progress was made in studing the satellite magnetic data of South America and adjacent marine areas. Preliminary versions of the 1 deg free-air gravity anomaly map (20 m gal contour interval) and the high cut (lambda approximately 8 deg) filtered anomaly maps are included.

Braile, L. W.↗

Patterns of seismic activity preceding large earthquakes

A mechanical model of seismic faults is employed to investigate the seismic activities that occur prior to major events. The block-and-spring model dynamically generates a statistical distribution of smaller slipping events that precede large events, and the results satisfy the Gutenberg-Richter law. The scaling behavior during a loading cycle suggests small but systematic variations in space and time with maximum activity acceleration near the future epicenter. Activity patterns inferred from data on seismicity in California demonstrate a regional aspect; increased activity in certain areas are found to precede major earthquake events. One example is given regarding the Loma Prieta earthquake of 1989 which is located near a fault section associated with increased activity levels.

Shaw, Bruce E.↗

The Cretaceous-Tertiary Impact Crater and the Cosmic Projectile that Produced it

Evidence gathered to date from topographic data, geophysical data, well logs, and drill-core samples indicates that the buried Chicxulub basin, the source crater for the approximately 65 Ma Cretaceous-Tertiary (K/T) boundary deposits, is approximately 300 km in diameter. A prominent topographic ridge and a ring of gravity anomalies mark the position of the basin rim at approximately 150 km from the center. Wells in this region recovered thick sequences of impact-generated breccias at 200-300 m below present sea level. Inside the rim, which has been severely modified by erosion following impact, the subsurface basin continues to deepen until near the center it is approximately 1 km deep. The best planetary analog for this crater appears to be the 270 km-diameter Mead basin on Venus. Seismic reflection data indicate that the central zone of downward displacement and excavation (the transient crater is approximately 130 km in diameter, consistent with previous studies of gravity anomaly data). Our analysis of projectile characteristics utilizes this information, coupled with conventional scaling relationships, and geochemical constraints on the mass of extraterrestrial material deposited within the K/T boundary layer. Results indicate that the Chicxulub crater would most likely be formed by a long-period comet composed primarily of nonsilicate materials (ice, hydrocarbons, etc.) and subordinate amounts (less than or equal to 50 percent) primitive chondritic material. This collision would have released the energy equivalent to between 4 x 10(exp 8) and 4 x 10(exp 9) megatons of TNT. Studies of terrestrial impact rates suggest that such an event would have a mean production rate of approximately 1.25 x 10(exp -9) y(exp -1). This rate is considerably lower than that of the major mass extinctions over the last 250 million years (approximately 5 x 10(exp -7) y(exp -1). Consequently, while there is substantial circumstantial evidence establishing the cause-effect link between the Chicxulub basin forming event and the K/T biological extinctions, the results of our analysis do not support models of impact as a common or singular causative agent of mass extinctions on Earth.

Sharpton, Virgil L.↗

GRM crustal magnetic anomalies: Separating the Lord Howe Rise and Norfolk Ridge submarine structures

Multiple source bodies often lie within the resolution element of the MAGSAT and POGO data. Small weak sources lying near larger stronger sources will tend to be missed, although they do contribute to the total observed anomaly. Lower elevation magnetic anomaly surveys such as GRM alleviate this problem through the combined effects of significantly greater resolution and stronger signal amplitude. This permits the detection of smaller source bodies, and analysis of their structure and nature. The improvement a GRM will provide is demonstrated in the Lord Howe Rise/Norfolk Ridge area east of Australia, between the Tasman Sea and south Fiji Basin. The submarine features origin have important plate tectonic implications. The Lord Howe Rise (LHR) is a continental fragment broken off from Australia by the opening of the Tasman Sea. It is a wide, shallow structure lying between 160 and 165 deg longitude at 23 to 37 deg S latitude. Seismic refraction data show the LHR crust extending to depths in excess of 20 km.

Frey, H.↗

Apollo 14 active seismic experiment.

Explosion seismic refraction data indicate that the lunar near-surface rocks at the Apollo 14 site consist of a regolith 8.5 meters thick and characterized by a compressional wave velocity of 104 meters per second. The regolith is underlain by a layer with a compressional wave velocity of 299 meters per second. The thickness of this layer, which we interpret to be the Fra Mauro Formation, is between 16 and 76 meters. The layer immediately beneath this has a velocity greater than 370 meters per second. We found no evidence of permafrost.

Watkins, J. S.↗

Density of the lunar interior.

It is attempted to derive the constraints that can be placed on the density of the lunar interior. The moment of inertia of the moon and its mean density are being considered in the investigation together with the mass and density of the lunar crust that have been inferred from the seismic refraction data recorded by the passive seismometer. The calculations presented show that the density of the lunar interior can easily approach values as high as 3.5 for a fraction of the lunar mass which lies in the range from 1/2 to 2/3.

Gast, P. W.↗

Proterozoic Bushveld-Vredefort catastrophe: Possible causes and consequences

Bushveld Complex and Vredefort Dome are unique features, formed in close proximity during the same time interval, approximately 2 Ga. Both show evidence of catastrophic events in the shallow marine environment of the otherwise stable Kaapvaal Craton. Explanation by multiple impacts of an asteroid, brecciated by an inter-asteroidal collision and disintegrating in Earth's gravity field is supported by pseudotachylite, shatter cones, coesite, and stishovite at Vredefort but these shock phenomena were not found in the Bushveld Complex. The Bushveld Complex was formerly interpreted as a lopolith, a view incompatible with gravity, electrical resistivity, magnetic, and seismic-reflection data. It is outlined by five inward-dipping lobes of layered ultramafic-mafic plutonic rocks that partly coalesce to form a basin-like feature 400 km in diameter and 65,000 sq. km. in area, equivalent to a small lunar mare. The Bushveld Complex is orders of magnitudes larger than other proposed terrestrial impact structures and differs from them in important ways. Its principal members, in order of age, are Rooiberg Felsite, RLS, and Lebowa Granite. The Bushveld-Vredefort events occurred during the interval from neutral or reducing atmosphere to oxidizing atmosphere. This transition is usually related to the evolution of photosynthesizing organisms. If the impact hypothesis for Bushveld-Vredefort can be confirmed, it may represent a global catastrophe sufficient to contribute to environmental changes favoring aerobic photosynthesizing eukaryotes over anaerobic prokaryotes.

Elston, W. E.↗

Structure and Kinematics of a Complex Crater: Upheaval Dome, Southeast, Utah

Two vastly different phenomena, extraterrestrial impact and salt diapirism, have been proposed for the origin of Upheaval Dome. Upheaval Dome is a about 2.5-km-diameter structural dome surrounded by a 5-km-diameter ring structural depression, which is in turn flanked by extensive, nearly flat-lying Colorado Plateau strata. Seismic refraction data and geologic mapping indicate that the dome originated by the collapse of a transient cavity formed by impact; data also show that rising salt has had a negligible influence on dome development. Evidence for this includes several factors: (1) a rare lag deposit of impactite is present; (2) fan-tailed fracture surfaces (shatter surfaces) and a few shattercones are present; (3) the top of the underlying salt horizon is at least 500 m below the center of the dome, with no exposures of salt in the dome to support the possibility that a salt diapir has ascended through it; (4) sedimentary strata in the center are significantly imbricated by top-to-the-center thrust faulting and are complexly folded; (5) top-to-the-center low-angle normal faults are found at the perimeter of the structure; and (6) clastic dikes are widespread. The scarcity of melt rocks and shock fabrics is attributed to approximately 0.5 km of erosion; the structures of the dome reflect processes of complex crater development at a depth of about 0.5 km below the crater floor. Based on mapping and kinematic analysis, we infer that the dome formed mainly by centerward motion of rock units along listric faults. Outcrop-scale folding and upturning of beds, especially common in the center, largely resulted from this motion. In addition, we have detected some centerward motion of fault-bounded wedges resulting from displacements on subhorizontal faults that conjoin and die out within horizontal bedding in the perimeter of the structure. Collectively, the observed deformation accounts for the creation of both the central uplift and the encircling ring syncline.

Kriens, B. J.↗

Computing Fault Displacements from Surface Deformations

Simplex is a computer program that calculates locations and displacements of subterranean faults from data on Earth-surface deformations. The calculation involves inversion of a forward model (given a point source representing a fault, a forward model calculates the surface deformations) for displacements, and strains caused by a fault located in isotropic, elastic half-space. The inversion involves the use of nonlinear, multiparameter estimation techniques. The input surface-deformation data can be in multiple formats, with absolute or differential positioning. The input data can be derived from multiple sources, including interferometric synthetic-aperture radar, the Global Positioning System, and strain meters. Parameters can be constrained or free. Estimates can be calculated for single or multiple faults. Estimates of parameters are accompanied by reports of their covariances and uncertainties. Simplex has been tested extensively against forward models and against other means of inverting geodetic data and seismic observations. This work

Lyzenga, Gregory↗

Water Storage and Transport Processes During Impact Experiments on Nominally Anhydrous Minerals

Water, in the form of structurally bound hydrogen in the crystal lattice of nominally anhydrous minerals (NAMs), strongly influences many important physical processes on terrestrial planets and planetary objects. Water enhances the rates of plastic deformation and controls the degree of partial melting in silicate rocks, which influences the generation of melt and therefore the nature of planetary volcanism. Water has also been experimentally demonstrated to influence the nature of lattice preferred orientation in deformed aggregates, and thus may be important in the interpretation of seismic anisotropy data collected from planetary bodies, such as from the current InSight mission on Mars. Therefore, much attention has been focused on characterizing the distribution and concentration of water in the planets and rocky bodies of our solar system.

Tielke, J.↗

Continuous monitoring of the lunar or Martian subsurface using on-board pattern recognition and neural processing of Rover geophysical data

The ultimate goal is to create an extraterrestrial unmanned system for subsurface mapping and exploration. Neural networks are to be used to recognize anomalies in the profiles that correspond to potentially exploitable subsurface features. The ground penetrating radar (GPR) techniques are likewise identical. Hence, the preliminary research focus on GPR systems will be directly applicable to seismic systems once such systems can be designed for continuous operation. The original GPR profile may be very complex due to electrical behavior of the background, targets, and antennas, much as the seismic record is made complex by multiple reflections, ghosting, and ringing. Because the format of the GPR data is similar to the format of seismic data, seismic processing software may be applied to GPR data to help enhance the data. A neural network may then be trained to more accurately identify anomalies from the processed record than from the original record.

Mcgill, J. W.↗