Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sample environments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Aerothermodynamic Environment Definition for the Genesis Sample Return Capsule

NASA's Genesis sample return mission will be the first to return material from beyond the Earth-Moon system. NASA Langley Research Center supported this mission with aerothermodynamic analyses of the sample return capsule. This paper provides an overview of that effort. The capsule is attached through its forebody to the spacecraft bus. When the attachment is severed prior to Earth entry, forebody cavities remain. The presence of these cavities could dramatically increase the heating environment in their vicinity and downstream. A combination of computational fluid dynamics calculations and wind tunnel phosphor thermography tests were employed to address this issue. These results quantify the heating environment in and around the cavities, and were a factor in the decision to switch forebody heat shield materials. A transition map is developed which predicts that the flow aft of the penetrations will still be laminar at the peak heating point of the trajectory. As the vehicle continues along the trajectory to the peak dynamic pressure point, fully turbulent flow aft of the penetrations could occur. The integrated heat load calculations show that a heat shield sized to the stagnation point levels will be adequate for the predicted environment aft of the penetrations.

Cheatwood, F. McNeil↗
DOE OSTI2020

Synthesis routes to eliminate oxide impurity segregation and their influence on intergrain connectivity in K-doped BaFe 2 As 2 polycrystalline bulks

The poor reproducibility of intergrain critical current density $J_c$ in Fe-based superconductors is often believed to result from uncontrolled grain boundary (GB) connectivity degraded by extrinsic factors such as the local or global impurity concentration or GB porosity or cracks. Earlier we found that Ba and K can appear as oxide impurities at GBs, along with GB-wetting FeAs. In this study, we evaluated how the sample preparation environment and purity of the starting materials influence the polycrystalline $J_c$ in K-doped BaFe 2 As 2 (Ba122) bulks. Using a high-performance glovebox, the oxygen and water levels were significantly reduced, eliminating traces of FeAs. We report oxide impurities and Ba (or K) segregation associated with oxygen in the starting materials were significantly reduced by using high purity starting materials. This combination essentially doubled the best $J_c$(4.2 K) values to 2.3 × 10 5 at self-field and 1.6 × 10 4 A cm –2 at 10 T and analytical scanning transmission electron microscopy showed no GB or O segregation in the best samples, but did show dark Z-contrast and distinct nanoscale porosity. Our work shows that an inert synthesis environment and high purity K and Ba do reduce current-blocking oxygen impurity and GB impurity phases, allowing deeper exploration of the role of extrinsic and intrinsic GB blocking effects in controlling the $J_c$ of polycrystalline Ba122.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Design of a robot-automated flat plate/reflection geometry x-ray diffraction setup for accelerated materials discovery and structural screening

Here, we report the design, construction, and automation of a flat plate sample loading, alignment, and data acquisition system for X-ray diffraction measurements in reflection geometry implemented at the Stanford Synchrotron Radiation Lightsource. The system is built onto a single platform, enabling facile transferability, and is compartmentalized into sample storage, sample transfer, and sample position/alignment segments. The core feature of this system is a six-axis robotic arm that offers a large range of highly reproducible and programable movements. The degrees of freedom of the robot arm enable adaptability in which movements can be modified to fit various beamline environments and sample configurations. Samples are housed on 3D printed sample mounts, which are arranged onto a 6 × 2 array of sample cassettes capable of holding 7 samples. Using sample mounts designed for solid oxide electrolysis button cells (SOECs), the maximum tray capacity is 84 samples, which can be aligned and run in ~ 24 hours with long exposure scans. The sample array is additionally capable of accommodating a range of sample sizes and geometries due to the rapid 3D printed fabrication. The components of the setup will be described in detail and performance will be demonstrated with a set of representative SOEC and XRD standard samples. Opportunities for future developments and integration with the automated setup are summarized.

08 HYDROGEN↗
NASA NTRSDate not supplied

Fabrication and Performance Characterization of Electrospun Nanofibers for Terrestrial and Space Applications

Passive thermal control is vital in space, especially for extended missions involving cryogen storage needing protection from sunlight. This presentation covers the development of a thermal coating with wavelength-selective characteristics using polymeric materials that scatter sunlight with minimal absorption, resulting in high solar reflectance. Furthermore, these coatings allow emission in infrared wavelengths, making them suitable for deep-space missions requiring extended storage. The study chose polymer and surface morphology suitable as solar reflectors that are lightweight, compact, and easily manufacturable, focusing on different multilayered nanofibers made using polytetrafluoroethylene and polyethylene-oxide (PTFE-PEO), polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP), and silica (SiO2). To understand how these materials interact with sunlight, we analyze light propagation through several layers of electrospun nanofibers to determine spectral reflectance, absorptance, and transmittance by solving the Maxwell equations. The model is also compared with measurements of spectral reflectance and transmittance of the various electrospun nanofibers using spectrophotometers interfaced with integrating spheres in the ultraviolet, visible, near-infrared, and mid-infrared wavelengths. The presentation will also describe the design and analysis, fabrication of the nanofibers using electrospinning, and several experimental characterization techniques to determine suitability for space applications. The nanofibers are tested using various tools to determine their suitability for cryogenic applications in space. Lastly, the samples were tested under low vacuum conditions and exposing them to sunlight inside a vacuum chamber maintained at 300 K. Relative to the incoming solar flux (1000 W/m2), only 1% of the energy was absorbed under these operating conditions. With further optimization and testing under high vacuum cryogenic environments, the samples could demonstrate much lower absorption or higher reflection of incoming solar radiation, which can translate to low temperatures suitable for cryogen storage.

Chieloka Ibekwe↗
NASA NTRS2017

Identification of Novel Desiccation-Tolerant S. cerevisiae Strains for Deep Space Biosensors

NASA's BioSentinel mission, a secondary payload that will fly on the Space Launch System's first Exploration Mission (EM-1), utilizes the budding yeast S. cerevisiae to study the biological response to the deep space radiation environment. Yeast samples are desiccated prior to launch to suspend growth and metabolism while the spacecraft travels to its target heliocentric orbit beyond Low Earth Orbit. Each sample is then rehydrated at the desired time points to reactivate the cells. A major risk in this mission is the loss of cell viability that occurs in the recovery period following the desiccation and rehydration process. Cell survival is essential for the detection of the biological response to features in the deep space environment, including ionizing radiation. The aim of this study is to mitigate viable cell loss in future biosensors by identifying mutations and genes that confer tolerance to desiccation stress in rad51, a radiation-sensitive yeast strain. We initiated a screen for desiccation-tolerance after rehydrating cells that were desiccated for three years, and selected various clones exhibiting robust growth. To verify retention of radiation sensitivity in the isolated clones - a crucial feature for a successful biosensor - we exposed them to ionizing radiation. Finally, to elucidate the genetic and molecular bases for observed desiccation-tolerance, we will perform whole-genome sequencing of those rad51 clones that exhibit both robust growth and radiation sensitivity following desiccation. The identification and characterization of desiccation-tolerant strains will allow us to engineer a biological model that will be resilient in face of the challenges of the deep space environment, and will thus ensure the experimental success of future biosensor missions.

S. cerevisiae↗
NASA NTRS2017

Identification of Novel Desiccation-Tolerant S. cerevisiae Strains for Deep Space Biosensors

NASA's BioSentinel mission, a secondary payload that will fly on the Space Launch Systems first Exploration Mission (EM-1), utilizes the budding yeast S. cerevisiae to study the biological response to the deep space radiation environment. Yeast samples are desiccated prior to launch to suspend growth and metabolism while the spacecraft travels to its target heliocentric orbit beyond Low Earth Orbit. Each sample is then rehydrated at the desired time points to reactivate the cells. A major risk in this mission is the loss of cell viability that occurs in the recovery period following the desiccation and rehydration process. Cell survival is essential for the detection of the biological response to features in the deep space environment, including ionizing radiation.The aim of this study is to mitigate viable cell loss in future biosensors by identifying mutations and genes that confer tolerance to desiccation stress in rad51, a radiation-sensitive yeast strain. We initiated a screen for desiccation-tolerance after rehydrating cells that were desiccated for three years, and selected various clones exhibiting robust growth. To verify retention of radiation sensitivity in the isolated clonesa crucial feature for a successful biosensorwe exposed them to ionizing radiation. Finally, to elucidate the genetic and molecular bases for observed desiccation-tolerance, we will perform whole-genome sequencing of those rad51 clones that exhibit both robust growth and radiation sensitivity following desiccation. The identification and characterization of desiccation-tolerant strains will allow us to engineer a biological model that will be resilient in face of the challenges of the deep space environment, and will thus ensure the experimental success of future biosensor missions.

S. cerevisiae↗
DOE OSTI2024

Application of printed strain gauges in prototypical nuclear reactor conditions

This report discusses the current development and testing of additively manufactured temperature sensors and resistive/ capacitive strain gauges. This has potential to improve the sensor design and manufacturing techniques to meet the requirements of in-pile monitoring of mechanical properties and structural health of materials and specimens in current and advanced nuclear test reactors (i.e., in terms of environment conditions, sample geometry, and materials compatibility). The developmental additively manufactured strain gauges are exposed to separate effects testing (i.e., mechanical strain (up to 1000 µe), high temperature (up to 700 °C)) to determine environmental factors that affect the performance of the strain gauge. The robustness and integrity of a printed strain gauge layer exposed to a molten salt environment for up to 500 hours was evaluated, with the goal of assessing material compatibility of printed strain sensors for instrumented surveillance test articles in molten salt reactors. In addition, sensor qualification methodologies are further developed for determining the reliability and robustness at the interface of the additively manufactured strain gauge materials.

36 - MATERIALS SCIENCE↗
DOE OSTI2026

The gas-phase mass–metallicity relation of dwarf galaxies across large-scale environments using the CAVITY parent sample

Context. The gas-phase mass–metallicity relation (MZR) of galaxies shows a noticeable break in slope and an increased scatter at low stellar masses, suggesting that the physical processes governing chemical enrichment differ between dwarf and high-mass systems. Dwarf galaxies, in particular, are highly susceptible to both internal and environmental mechanisms due to their shallow potential wells. Aims. The primary aim of this work is to assess whether a single, universal MZR can describe dwarf galaxies across diverse large-scale environments, or whether systematic environmental variations emerge. To probe these, we examine the MZR and star formation rate (SFR) of dwarf galaxies with stellar masses in the range of 8.9 < log(M ★ /M ⊙ ) < 9.5. Methods. Using optical spectra from the Sloan Digital Sky Survey, we measured the fluxes of key emission lines via the pyPipe3D full spectral fitting pipeline. Aperture-corrected fluxes, along with multiple metallicity indicators and calibrations, were used to derive the MZR and the SFR for 353, 311, and 22 dwarf galaxies located in voids, filaments, and clusters, respectively. Results. We find a systematic variation in the MZR slope, steeper in voids (0.28 ± 0.03) and progressively flatter in clusters (0.17 ± 0.08), indicating a dependence of the MZR on the large-scale environment in this mass regime. When galaxies are separated by local density, no significant differences are observed between isolated and non-isolated dwarfs in voids. Isolated dwarf galaxies in filaments also exhibit properties similar to those of their counterparts in voids. However, non-isolated filament galaxies exhibit similar MZR slopes comparable to those of cluster dwarfs and flatter slopes than their counterparts in voids. Conclusions. We report both large- and local-scale environmental dependencies in the gas-phase metallicity and in the slope of the MZR for dwarf galaxies. Consistent with the general consensus on the pre-processing of galaxies in filaments, our results indicate that the influence of the local environment becomes increasingly significant within the filamentary regions of the cosmic web, affecting the chemical enrichment and star formation activity of low-mass systems. These findings further suggest that a portion of the scatter commonly observed in the MZR of dwarf galaxies arises from environmental effects.

Bidaran, Bahar [Dpto. de Física Teórica y del Cosm↗
NASA NTRSDate not supplied

Aerothermal Analysis and Environment Predictions for the Mars Sample Retrieval Lander (SRL)

Mars Sample Retrieval Lander (SRL) is the next mission to Mars, and an integral part of the proposed Mars Sample Return (MSR) Program. Aerothermal Analysis of the SRL capsule takes advantage of the design and analysis of the Mars Science Laboratory and the Mars 2020 missions, findings from the MEDLI and MEDLI2 heatshield instrumentation campaigns, and developments in predictive capabilities over the last 20 years. In particular, SRL is being designed to enter the Mars atmosphere at velocities as high as 8 km/s, which would be the highest for a Mars entry, and is expected to encounter additional shock layer radiation physics compared to previous missions to Mars. This paper presents the status of analysis including the overall methodology, models and assumptions of the aerothermal environment predictions, with a focus on differences from the approaches and modeling used for Mars 2020 and MSL.

Mars↗
NASA NTRSDate not supplied

Aerothermal Analysis and Environment Predictions for the Mars Sample Retrieval Lander (SRL)

Mars Sample Retrieval Lander (SRL) is the next mission to Mars, and an integral part of the proposed Mars Sample Return (MSR) Program. Aerothermal Analysis of the SRL capsule takes advantage of the design and analysis of the Mars Science Laboratory and the Mars 2020 missions, findings from the MEDLI and MEDLI2 heatshield instrumentation campaigns, and developments in predictive capabilities over the last 20 years. In particular, SRL is being designed to enter the Mars atmosphere at velocities as high as 8 km/s, which would be the highest for a Mars entry, and is expected to encounter additional shock layer radiation physics compared to previous missions to Mars. This paper presents the status of analysis including the overall methodology, models and assumptions of the aerothermal environment predictions, with a focus on differences from the approaches and modeling used for Mars 2020 and MSL.

Mars↗
DOE OSTI2021

Novel Gloeobacterales spp. from Diverse Environments across the Globe

Photosynthetic Cyanobacteria and their descendants are the only known organisms capable of oxygenic photosynthesis. Their metabolism permanently changed the Earth’s surface and the evolutionary trajectory of life, but little is known about their evolutionary history. Genomes of the Gloeobacterales, an order of deeply divergent photosynthetic Cyanobacteria, may hold clues about the evolutionary process. However, there are only three published genomes within this order, and it is difficult to make broad inferences based on such little data. Here, I describe five species within the Gloeobacterales retrieved from publicly available databases and examine their photosynthetic gene content and the environments in which Gloeobacterales genomes and 16S rRNA gene sequences are found. The Gloeobacterales contain reduced photosystems and inhabit cold, wet-rock, and low-light environments. They are likely present in low abundances due to their low growth rate. Future searches for Gloeobacterales should target these environments, and samples should be deeply sequenced to capture the low-abundance taxa. Publicly available databases contain undescribed taxa within the Gloeobacterales. However, searching through all available data with current methods is computationally expensive. Therefore, new methods must be developed to search for these and other evolutionarily important taxa. Once identified, these novel photosynthetic Cyanobacteria will help illuminate the origin and evolution of oxygenic photosynthesis. Early branching photosynthetic Cyanobacteria such as the Gloeobacterales may provide clues into the evolutionary history of oxygenic photosynthesis, but there are few genomes or cultured taxa from this order. Five new metagenome-assembled genomes suggest that members of the Gloeobacterales all contain reduced photosystems and lack genes associated with thylakoids and circadian rhythms. Their distribution suggests that they may thrive in environments that are marginal for other species, including wet-rock and cold environments. These traits may aid in the discovery and cultivation of novel species in this clade.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2003

Evaporation Rate Study and NDMA Formation from UDMH/NO2 Reaction Products

Laboratory samples of uns-dimethylhydrazine (UDMH) fuel/oxidizer (nitrogen dioxide) non-combustion reaction products (UFORP) were prepared using a unique permeation tube technology. Also, a synthetic UFORP was prepared from UDMH, N-nitrosodimethylamine (NDMA), dimethylammonium nitrate, sodium nitrite and purified water. The evaporation rate of UFORP and synthetic UFORP was determined under space vacuum (approx 10(exp -3) Torr) at -40 ?C and 0 ?C. The material remaining was analyzed and showed that the UFORP weight and NDMA concentration decreased over time; however, NDMA had not completely evaporated. Over 85% of the weight was removed by subjecting the UFORP to 10(-3) Torr for 7 hours at -40 ?C and 4 hours at 0 ?C. A mixture of dimethylammonium nitrate and sodium nitrite formed NDMA at a rapid rate in a moist air environment. A sample of UFORP residue was analyzed for formation of NDMA under various conditions. It was found that NDMA was not formed unless nitrite was added.

Buchanan, Vanessa D.↗
NASA NTRS2016

Storage of Physical Sample Metadata in the Astrobiology Habitable Environments Database (AHED)

The National Aeronautics and Space Administration has begun an effort to store, curate, and publish information about physical samples collected and analyzed in conjunction with NASA-funded astrobiology research. Astrobiology is a multidisciplinary area of scientific research being conducted by collaborating teams of biologists, chemists, geologists, atmospheric scientists, oceanographers, astrophysicists, astronomers, and other specialists. Astrobiology studies the origin, evolution, and distribution of life in the Universe. NASA uses the results of astrobiology research to focus its future missions on targets of opportunity for the discovery of life off Earth. Astrobiology researchers conduct both field-based and laboratory-based research, during which physical samples are collected, processed, and catalogued. The cataloguing practices employed by different teams of astrobiologists vary widely, and there are no specific standards available to guide the collection and recording of astrobiology sample data. The disparity in data collection approaches and the lack of a centralized sample repository makes it difficult for astrobiology teams to share data and benefit from resultant synergies.To facilitate data sharing within the astrobiology community, NASA is developing a prototype database the Astrobiology Habitable Environments Database (AHED) and an associated set of data collection templates. The database will store information about samples, along with associated measurements and analyses, including information about biological cultures enriched or isolated from samples, and the results of analyses performed on the samples (e.g., via spectrography, microscopy, etc.). In addition, the system will store contextual information about field sites where samples were collected, the instruments or equipment used for analysis, and people and institutions involved in their collection. AHED is being implemented on top of Open Data Repository's Data Publisher [1], an open source software platform for the publication of scientific datasets. The data collection templates under development represent an initial attempt to propose a set of metadata for capture and storage within AHED. The design of these templates is being conducted by a consolidated group of astrobiologists from active research teams at NASA Ames Research Center, assisted by data science and software engineering specialists. These initial templates must be vetted with the broader astrobiology community through a defined process to ensure that they meet community needs. Each template captures a different type of data collection record. For each template, we are developing a list of fields to be captured, including a set of required entry fields, a set of recommended but optional fields, and a set of discretionary fields. A datatype selected from a variety of text and numeric types is specified for each field. Included is a 'choice' type that restricts user input to an enumerated list of values. Many of the fields and field values capture information of particular interest to the astrobiology community, and are intended to facilitate search and retrieval of relevant data across multiple datasets.

Keller, Rich↗
DOE OSTI2023

Mechanical Consequences of Oxygen Inhibition in Vat Polymerization

Vat polymerization is a type of additive manufacturing that is used extensively to produce micro-architected structures for mechanical applications, which brings the mechanical properties of photopolymerized resins into sharp focus. However, it is known that photopolymerization is sensitive to a number of factors, perhaps the most notorious of which is oxygen inhibition. Herein, the degree to which oxygen inhibition influences the macroscopic and microscopic properties of structures made using vat polymerization is explored. This work is motivated by an observation of lattices being >4 times softer in the experiment than predicted by simulation, which is hypothesized to be due to the material at the surface being incompletely cured. Furthermore, this hypothesis is supported by four-point bending tests in which flexural modulus is found to increase with beam thickness. Nanoindentation and bulk compression studies show that this surface softening is present for three distinct resins. Importantly, it is observed that structures post-print cured in nitrogen are stiffer than those post-print cured in air, however, regardless of the post-print curing environment, printing samples in the presence of oxygen makes them softer than samples photocured in nitrogen. Collectively, these results show the outsized influence of oxygen inhibition on micro-architected structures realized using vat polymerization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evaluation of the effects of neutron irradiation on first-generation corrosion mitigation coatings on SiC for accident-tolerant fuel cladding

In this work, high purity SiC and SiC/SiC composites coated with commercial TiN, Cr, CrN, or CrN/Cr multilayer coatings were irradiated in Ar or flowing PWR water in the Massachusetts Institute of Technology Nuclear Reactor Laboratory (MITR). Irradiation in Ar was performed in the core. In the water environment, identical samples were placed in one of three different locations: in-core, providing exposure to neutron damage and radiolysis-affected water; above-core, where samples were exposed to radiolysis-affected water but not neutron damage, or outside of the core, where samples were exposed to the coolant water without the effects of radiation. Radiation in Ar revealed significant cracking of all but the TiN coatings, attributed to differential swelling between the coating and substrate. Lattice swelling was not observed in any of the coatings, but 0.2% void swelling was observed in the Cr coating. All of the coatings failed during water exposures in the core. Likewise, CrN/Cr spalled in each condition. Cr was protective, except under radiation damage as a result of cracking, and TiN severely degraded in the core with no coating was found following exposure. A SiC/coating ATF cladding system is anticipated to perform adequately following improvements in coating ductility and purity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Novel data analysis method for obtaining better performance from a complex 3D-printed collimator

Additively manufactured scattered beam collimators are increasingly being employed to boost the sample to cell peak signal ratio in high pressure neutron diffraction studies because of manufacturing versatility and performance improvements. We study how the measured diffraction pattern is affected by the presence of a collimator downstream of the sample, and develop a novel protocol that provides more effective background rejection. This protocol takes into account critical performance-determinants that were identified in this study, namely: (i) effectively identifying the collimator pattern on the detector; (ii) understanding the dependence of this pattern on sample and cell composition; and (iii) accurately identifying and differentiating the different regions of the pattern on the detector based on the dependency of the cell or sample and finally (iv) resolving the intensities at regions of the detector where neutrons scattered from the sample are preferentially represented, in order to boost the sample to cell peak signal ratio. Application of this novel analysis protocol is shown to increase the collimator performance over the traditional method.

3D printing↗