Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reversible computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Observable in the reversible reaction gamma + d yields n + p

Calculations are presented on the effect of the two-body charge and current density effects on the observables in the photodisintegration of a deuteron. The computations are performed in a cartesian coordinate system, initially for gamma rays plane-polarized in the x-direction. Unpolarized photons are treated with an incoherent superposition of transition amplitudes for gamma rays polarized in the x- and y- directions. Account is taken of recoil and interaction energies after an initial state is defined. Consideration is focused on the cross section, polarization, and asymmetry of the reaction at low and medium energy incident gamma rays.

Rustgi, M. L.↗

Flow-Field Measurements in a Wing-Fuselage Junction Using an Embedded Particle Image Velocimetry System

A novel, embedded, 2D Particle Image Velocimetry system has been developed and implemented to obtain off-body velocity measurements in the junction of an 8% wing-body configuration in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. Although the initial purpose for implementing the system during this test was to evaluate system performance and identify potential risks, the system worked remarkably well and a considerable amount of data were obtained in the wing-fuselage junction near the trailing edge at a Reynolds Number of 2.4 Million and angle of attack of 5 degrees. In addition to providing notable efficiencies with regard to image acquisition and test operations, the PIV system proved to be quite capable of capturing unique details of the flow separation to complement the extensive suite of measurement techniques applied during the test. Instantaneous PIV vector fields reveal that the flow separation is not stationary but rather highly dynamic. Mean flow statistics calculated from the PIV measurements highlight where reverse flow and Reynolds stresses are concentrated in the separated region and agree well with results from the embedded Laser Doppler Velocimeter system and Computational Fluid Dynamics. The comparisons and additional insight gained during this effort will help guide system improvements for follow-on tests.

Jenkins, Luther N.↗

Update on the Juncture Flow PIV Results and Future Plans

A novel, embedded, 2D Particle Image Velocimetry system has been developed and implemented to obtain off-body velocity measurements in the junction of an 8% wing-body configuration in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. Although the initial purpose for implementing the system during this test was to evaluate system performance and identify potential risks, a considerable amount of data were obtained in the wing-fuselage junction near the trailing edge at a Reynolds Number of 2.4 Million and angle of attack of 5 degrees. In addition to providing notable efficiencies with regard to image acquisition and test operations, the PIV system captured unique details of the flow separation to complement the extensive suite of measurement techniques applied during the test. Instantaneous PIV vector fields reveal that the flow separation is not stationary but rather highly dynamic. Mean flow statistics calculated from the PIV measurements highlight where reverse flow and Reynolds stresses are concentrated in the separated region and agree well with results from the embedded Laser Doppler Velocimeter system and Computational Fluid Dynamics. The comparisons and ional insight gained during this effort will help guide system improvements for the upcoming entry in 2020.

Jenkins, Luther N.↗

An Efficient GPU-Accelerated Multi-Source Global Fit Pipeline for LISA Data Analysis

The large-scale analysis task of deciphering gravitational wave signals in the LISA data stream will be difficult, requiring a large amount of computational resources and extensive development of computational methods. Its high dimensionality, multiple model types, and complicated noise profile require a global fit to all parameters and input models simultaneously. In this work, we detail our global fit algorithm, called “Erebor,” designed to accomplish this challenging task. It is capable of analysing current state-of-the-art datasets and then growing into the future as more pieces of the pipeline are completed and added. We describe our pipeline strategy, the algorithmic setup, and the results from our analysis of the LDC2A Sangria dataset, which contains Massive Black Hole Binaries, compact Galactic Binaries, and a parameterized noise spectrum whose parameters are unknown to the user. The Erebor algorithm includes three unique and very useful contributions: GPU acceleration for enhanced computational efficiency; ensemble MCMC sampling with multiple MCMC walkers per temperature for better mixing and parallelized sample creation; and special online updates to reversible-jump (or trans-dimensional) sampling distributions to ensure sampler mixing and accurate initial estimates for detectable sources in the data. We recover posterior distributions for all 15 (6) of the injected MBHBs in the LDC2A training (hidden) dataset. We catalog ∼12000 Galactic Binaries (∼8000 as high confidence detections) for both the training and hidden datasets. All of the sources and their posterior distributions are provided in publicly available catalogs.

LISA global fit↗

Swirling jet turbulent mixing and combustion computations

Computations are presented describing the mixing and combustion of swirling jets in a coaxial stream. It is demonstrated that the boundary layer equations represent the flow reasonably well until reversed flow is imminent. For the range of parameters investigated indications are that the edge velocity has little effect on the behavior of the flow. Furthermore, confining the flow with a constant pressure wall, or impressing a favorable pressure gradient on the coaxial flow, acts to reduce the severity of the centerline adverse pressure gradient created by the swirl decay. A simple scalar eddy viscosity model, including a potential core formulation, is shown to described the behavior of weak swirling flow in the far region but is only in fair agreement with observations in the near region. The effects of swirl on a burning hydrocarbon jet exhausting into a cold coaxial stream are shown to be intensified by the reduction of the density due to combustion. The enhanced mixing properties of high swirl flow produce rapid diffusion of the burning gases into the cold edge flow causing early cessation of the NO producing reactions. Computations show that doubling the initial jet swirl could reduce the NO production by 25 percent.

Rubel, A.↗

Chemical Thermodynamics and the Mathematical Integration of Reaction Kinetics

Key advances in the development of numerical methods for non-reacting compressible flows have been enabled by translating physical requirements into concrete numerical guidelines, such as the satisfaction of entropy inequalities for shock-capturing techniques [Lax, Contributions to Nonlinear Functional Analysis (1971) 603-634]. In the present work, we present nonlinear numerical analysis tools that draw from Chemical Thermodynamics , the branch of Nonequilibrium Thermodynamics that deals with chemical reactions. Through Gibbs formalism, chemical thermodynamics provides a well-known theoretical expression for the chemical equilibrium constant of a reaction in terms of reduced chemical potentials. A less-known, yet extremely valuable result, due to [Krambeck, Arch. Ration. Mech. Anal. , 38 (1970) 317], states that when this expression is implemented, mass-action kinetic models are consistent with the dynamical prescriptions of the 2nd law of thermodynamics. For fixed-temperature ordinary differential equations modeling constant-volume reacting gas mixtures, this leads to a decreasing Helmholtz free energy. If the temperature is allowed to vary in accordance with conservation of energy (1st law), this leads to the statement of increasing entropy. These nonlinear prescriptions can, and should be, used to further develop temporal integration techniques for reaction kinetics. We demonstrate that Krambeck's result holds even when the equilibrium constants are approximated from data. We prove this result by constructing the implicit free energy and the implicit entropy inherent to a given approximation. This is first done for a 5-species, 17-reaction model problem for air. With this structure established, elements of discrete entropy-stability theory [Tadmor, Acta Numer. , 12 (2003) 451] are leveraged to examine the consistency of time-integration schemes with these prescriptions. Using chemical potentials, one can compute the respective contributions of the kinetics model and of the temporal scheme to free energy/entropy variations. We introduce a nonlinear-stable version of the Discontinuous-Galerkin (DG) scheme in time which shows robustness improvements over the standard linearly-stable version. Most notably, the maximum timestep that can be resolved with the nonlinearly-stable variant tends to grow with polynomial order, in contrast to the linearly-stable variant. We generalize our constructions to arbitrary systems of reversible chemical reactions, ultimately showing that the compressible reacting Euler system admits the opposite of the implicitly constructed thermodynamic entropy as a mathematical entropy . This lays important theoretical foundations towards robust scheme development [Harten, J. Comput. Phys. 49 (1983) 151-164].

STMD↗

Ultrasonic Doppler measurement of renal artery blood flow

Studies were made of (1) blood flow redistribution during lower body negative pressure (LBNP), (2) the profile of blood flow across the mitral annulus of the heart (both perpendicular and parallel to the commissures), (3) testing and evaluation of a number of pulsed Doppler systems, (4) acute calibration of perivascular Doppler transducers, (5) redesign of the mitral flow transducers to improve reliability and ease of construction, and (6) a frequency offset generator designed for use in distinguishing forward and reverse components of blood flow by producing frequencies above and below the offset frequency. Finally methodology was developed and initial results were obtained from a computer analysis of time-varying Doppler spectra.

Freund, W. R.↗

Overlapping emission peaks in the solar C I multiplets at lambda 1560 and lambda 1657

Observations of the C I multiplets at 1560 and 1657 A made with the University of Colorado spectrometer on the OSO 8 satellite are presented and compared with computed profiles for the Vernazza-Avrett-Loeser solar atmosphere. These are optically thick emission lines formed in the solar chromosphere that show the central reversals typical of such lines. In each multiplet there is an interesting case of overlapping emission peaks which shows that such peaks do not constructively combine but instead weaken. This behavior is easily understood and reproduced with an optically thick, non-LTE mode of formation for these lines and is not consistent with an optically thin mechanism. We also find that the shapes of these blends are very sensitive to the magnitude of the nonthermal microvelocities.

Shine, R. A.↗

Observation of gravity waves during the extreme tornado outbreak of 3 April 1974

A continuous wave-spectrum high-frequency radiowave Doppler sounder array was used to observe upper-atmospheric disturbances during an extreme tornado outbreak. The observations indicated that gravity waves with two harmonic wave periods were detected at the F-region ionospheric height. Using a group ray path computational technique, the observed gravity waves were traced in order to locate potential sources. The signals were apparently excited 1-3 hours before tornado touchdown. Reverse ray tracing indicated that the wave source was located at the aurora zone with a Kp index of 6 at the time of wave excitation. The summation of the 24-hour Kp index for the day was 36. The results agree with existing theories (Testud, 1970; Titheridge, 1971; Kato, 1976) for the excitation of large-scale traveling ionospheric disturbances associated with geomagnetic activity in the aurora zone.

Hung, R. J.↗

Biomimetic robots using EAP as artificial muscles - progress and challenges

Biology offers a great model for emulation in areas ranging from tools, computational algorithms, materials science, mechanisms and information technology. In recent years, the field of biomimetics, namely mimicking biology, has blossomed with significant advances enabling the reverse engineering of many animals' functions and implementation of some of these capabilities.

robotics↗

Comparative efficiency of finite, boundary and hybrid element methods in elastostatics

The comparative computational efficiencies of the finite element (FEM), boundary element (BEM), and hybrid boundary element-finite element (HBFEM) analysis techniques are evaluated for representative bounded domain interior and unbounded domain exterior problems in elastostatics. Computational efficiency is carefully defined in this study as the computer time required to attain a specified level of solution accuracy. The study found the FEM superior to the BEM for the interior problem, while the reverse was true for the exterior problem. The hybrid analysis technique was found to be comparable or superior to both the FEM and BEM for both the interior and exterior problems.

Schwartz, C. W.↗

Research related to improved computer aided design software package

The comparative computational efficiencies of the finite element (FEM), boundary element (BEM), and hybrid boundary element-finite element (HVFEM) analysis techniques are evaluated for representative bounded domain interior and unbounded domain exterior problems in elastostatics. Computational efficiency is carefully defined in this study as the computer time required to attain a specified level of solution accuracy. The study found the FEM superior to the BEM for the interior problem, while the reverse was true for the exterior problem. The hybrid analysis technique was found to be comparable or superior to both the FEM and BEM for both the interior and exterior problems.

Walston, W. H., Jr.↗

Configurations of corotating shocks in the outer heliosphere

Configurations of corotating shocks in the outer heliosphere are computed on the assumption that the shocks move at constant speeds between collisions. The basic physical process is the interaction of a forward shock with a reverse shock. The points at which this interaction takes place are determined algebraically in terms of the initial shock positions and speeds. Between the points at which the shocks interact, the shocks have the form of Archimedian spirals. Shock configurations are determined for the case of two corotating shock pairs originating at 2.5 AU and for a single shock pair at 2.5 AU. In both cases the heliosphere is divided into several distinct regions distinguished by the number of times the particles have passed through a shock. Since the shock strengths decrease when a forward shock interacts with a reverse shock, corotating shocks are expected to be weaker at larger distances from the sun.

Burlaga, L. F.↗

Driven, steady-state RFP computations

The pseudospectral three-dimensional MHD code of Dahlburg et al. (1986 and 1987) is used to compute the dynamical behavior of a channel of magnetofluid carrying an axial current and magnetic flux. This situation contains the essential MHD behavior of the reversed-field pinch (RFP). An externally imposed electric field is applied to an initially current-free magnetofluid and drives currents that rise and eventually fluctuate about values corresponding to pinch ratios Theta of about 1.3, 2.2, and 4.5. A period of violent turbulence leads to an approximately force-free core, surrounded by an active MHD boundary layer that is not force-free. A steady state is reached that can apparently be sustained indefinitely (for several hundred Alfven transit times or longer). The turbulence level and time variability in the steady state increase with increasing Theta. The average toroidal magnetic field at the wall reverses for Theta = 2.2 and 4.5, but not for Theta = 1.3. Negative toroidal current filaments are observed. The Lundquist numbers are of the order of a few hundred.

Dahlburg, J. P.↗

Myths and realities: Defining re-engineering for a large organization

This paper describes the background and results of three studies concerning software reverse engineering, re-engineering, and reuse (R3) hosted by the Internal Revenue Service in 1991 and 1992. The situation at the Internal Revenue--aging, piecemeal computer systems and outdated technology maintained by a large staff--is familiar to many institutions, especially among management information systems. The IRS is distinctive for the sheer magnitude and diversity of its problems; the country's tax records are processed using assembly language and COBOL and spread across tape and network DBMS files. How do we proceed with replacing legacy systems? The three software re-engineering studies looked at methods, CASE tool support, and performed a prototype project using re-engineering methods and tools. During the course of these projects, we discovered critical issues broader than the mechanical definitions of methods and tool technology.

Yin, Sandra↗

Combustion Instabilities Modeled

NASA Lewis Research Center's Advanced Controls and Dynamics Technology Branch is investigating active control strategies to mitigate or eliminate the combustion instabilities prevalent in lean-burning, low-emission combustors. These instabilities result from coupling between the heat-release mechanisms of the burning process and the acoustic flow field of the combustor. Control design and implementation require a simulation capability that is both fast and accurate. It must capture the essential physics of the system, yet be as simple as possible. A quasi-one-dimensional, computational fluid dynamics (CFD) based simulation has been developed which may meet these requirements. The Euler equations of mass, momentum, and energy have been used, along with a single reactive species transport equation to simulate coupled thermoacoustic oscillations. A very simple numerical integration scheme was chosen to reduce computing time. Robust boundary condition procedures were incorporated to simulate various flow conditions (e.g., valves, open ends, and choked inflow) as well as to accommodate flow reversals that may arise during large flow-field oscillations. The accompanying figure shows a sample simulation result. A combustor with an open inlet, a choked outlet, and a large constriction approximately two thirds of the way down the length is shown. The middle plot shows normalized, time-averaged distributions of the relevant flow quantities, and the bottom plot illustrates the acoustic mode shape of the resulting thermoacoustic oscillation. For this simulation, the limit cycle peak-to-peak pressure fluctuations were 13 percent of the mean. The simulation used 100 numerical cells. The total normalized simulation time was 50 units (approximately 15 oscillations), which took 26 sec on a Sun Ultra2.

Paxson, Daniel E.↗

A real time spectrum to dose conversion system

A system has been developed which permits the determination of dose in real time or near real time directly from the pulse-height output of a radiation spectrometer. The technique involves the use of the resolution matrix of a spectrometer, the radiation energy-to-dose conversion function, and the geometrical factors, although the order of matrix operations is reversed. The new technique yields a result which is mathematically identical to the standard method while requiring no matrix manipulations or resolution matrix storage in the remote computer. It utilizes only a single function for each type dose required and each geometric factor involved.

Farmer, B. J.↗

Nickel-cadmium Battery Cell Reversal from Resistive Network Effects

During the individual cell short-down procedures often used for storing or reconditioning nickel-cadmium (Ni-Cd) batteries, it is possible for significant reversal of the lowest capacity cells to occur. The reversal is caused by the finite resistance of the common current-carrying leads in the resistive network that is generally used during short-down. A model is developed to evaluate the extent of such a reversal in any specific battery, and the model is verified by means of data from the short-down of a f-cell, 3.5-Ah battery. Computer simulations of short-down on a variety of battery configurations indicate the desirability of controlling capacity imbalances arising from cell configuration and battery management, limiting variability in the short-down resistors, minimizing lead resistances, and optimizing lead configurations.

Zimmerman, A. H.↗