Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflection coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Radiation from the open end of a cylindrical or conical pipe and scattering from the end of a rod or slab

The radiation of sound through the open end of a cylindrical or conical pipe of any cross section, or through a hole in a plane wall, is analyzed theoretically. The scattering of a sound wave by the end of a rod or slab is also treated. Only the case in which the wavelength is large compared with a typical radial dimension of the opening or of the end is considered. The method of matched asymptotic expansions is employed. Results on end corrections and reflection coefficients previously obtained by Helmholtz (1860), Rayleigh (1945), and Bazer and Karp (1954), using intuitive arguments, are recovered and verified. Agreement is found with the exact results of Levine and Schwinger (1948) and Vainstein (1948), as well as with the small radial-dimension/wavelength results of Lesser and Lewis (1972), in the cases they treated. In addition various new results are obtained.

Ting, L.↗

Investigation of ground reflection and impedance from flyover noise measurements

An extensive series of flyover noise tests was conducted for the primary purpose of studying meteorological effects on propagation of aircraft noise. The test airplane, a DC 9-10, flew several level-flight passes at various heights over a taxiway. Two microphone stations were located under the flight path. A total of 37 runs was selected for analysis and processed to obtain a consistant set of 1/3 octave band sound pressure levels at half-second intervals. The goal of the present study was to use the flyover noise data to deduce acoustical reflection coefficients and hence, acoustical impedances.

Chapkis, R. L.↗

Effect of surface roughness on the microwave emission from soils

The effect of surface roughness on the brightness temperature of a moist terrain was studied through the modification of Fresnel reflection coefficient and using the radiative transfer equation. The modification involves introduction of a single parameter to characterize the roughness. It is shown that this parameter depends on both the surface height variance and the horizontal scale of the roughness. Model calculations are in good quantitative agreement with the observed dependence of the brightness temperature on the moisture content in the surface layer. Data from truck mounted and airborne radiometers are presented for comparison. The results indicate that the roughness effects are greatest for wet soils where the difference between smooth and rough surfaces can be as great as 50K.

Choudhury, B. J.↗

Reflection and radiation due to a quadrupole near a fluid interface

The reflection of sound at an interface between two fluid half-space in relative motion (one in motion and the other at rest), but with different density and different sound speed, is considered. The reflection coefficient is found in an explicitly closed form. A brief discussion of the effect of mean velocity, i.e., corresponding Mach number on different noise generating quadrupole directivities concludes the presentation of the paper. The graphs provided illustrate this aspect in a rather more convincing way.

Dash, R.↗

A finite element method for transmission in non-uniform ducts without flow Comparison with the method of weighted residuals

A finite element method is derived for studying the transmission of sound in nonuniform ducts without flow. The method is based on a weighted residuals technique and eight noded isoparametric elements. The method employs two computational schemes: the Helmholtz equation found through conservation equations, and the conservation equations themselves. Solutions are found for transmission and reflection coefficients for both two-dimensional and circular geometries. Numerical solutions are compared with those for a method of weighted residuals in the form of a modified Galerkin method, showing good agreement.

Astley, R. J.↗

Loaded horizontal antenna over an imperfect ground

The effect of loading for antennas over an imperfect ground is analyzed. The Fresnel reflection coefficient technique is used to derive an E-integral equation for the antenna current. An optimization method is employed to determine the critical loading parameter which enforces a traveling wave current on the antenna. Results are given for the critical loading parameters, antenna currents, input impedances, and radiation patterns for various antenna dimensions and ground parameters. Calculations of the time-domain behavior of the current are presented to show the effect of loading on antenna transient response.

Rahmat-Samii, Y.↗

Sound radiation from hyperboloidal inlet ducts

This paper presents rigorous solutions for the problem of sound radiation from various inlet ducts including hyperboloidal (or hyperbolic) inlet ducts and circular ducts with wide flange. The numerical results include the complex conversion (or reflection) coefficients and the radiation directivity for the various incident wave modes - spinning modes as well as axisymmetric modes. The analysis utilizes hyperboloidal wave functions which are defined here as a class of eigensolutions of the wave equation for oblate spheroidal coordinates, and is valid for the whole frequency range including frequencies above and below the cutoff frequencies of duct modes involved.

Cho, Y. C.↗

An impulse test technique with application to acoustic measurements

A method has been presented for measuring the acoustic properties of an absorbent material and a duct/nozzle system (with or without airflow) using a high voltage spark discharge as an impulse source of sound. The cross-spectra of the incident, reflected and transmitted acoustic pressure transients are analyzed by way of a FFT digital processor in the form of complex transfer functions. These transfer functions have a direct relationship to the termination impedance and radiation directivity. The impulse method has been justified by comparisons, with data obtained from existing methods (both experimental and theoretical), that show excellent agreement. Reflection coefficients and radiation impedances of various duct-nozzle systems and their associated far-field directivities are also presented as some of the applications of the impulse technique.

Salikuddin, M.↗

Effect of surface roughness on the microwave emission from soils

The effect of surface roughness on the brightness temperature of a moist terrain has been studied through the modification of Fresnel reflection coefficient and using the radiative transfer equation. The modification involves introduction of a single parameter to characterize the roughness. It is shown that this parameter depends on both the surface height variance and the horizontal scale of the roughness. Model calculations are in good quantitative agreement with the observed dependence of the brightness temperature on the moisture content in the surface layer. Data from truck mounted and airborne radiometers are presented for comparison. The results indicate that the roughness effects are great for wet soils where the difference between smooth and rough surfaces can be as great as 50 K.

Choudhury, B. J.↗

Differential correction capability of the GTDS using TDRSS data

A differential correction (DC) capability was implemented in the Goddard Trajectory Determination System (GTDS) to process satellite tracking data acquired via the Tracking and Data Relay Satellite System (TRDRSS). Configuration of the TDRSS is reviewed, observation modeling is presented, and major features of the capability are discussed. The following types of TDRSS data can be processed by GTDS: two way relay range and Doppler measurements, hybrid relay range and Doppler measurements, one way relay Doppler measurements, and differenced one way relay Doppler measurements. These data may be combined with conventional ground based direct tracking data. By using Bayesian weighted least squares techniques, the software allows the simultaneous determination of the trajectories of up to four different satellites - one user satellite and three relay satellites. In addition to satellite trajectories, the following parameters can be optionally solved: for drag coefficient, reflectivity of a satellite for solar radiation pressure, transponder delay, station position, and biases.

Liu, S. Y.↗

Inlet contour and flow effects on radiation

An experimental investigation of sound radiation from inlets with different contours with and without flow is being conducted to study the possibility of reducing noise radiated by aircraft engines. For each inlet configuration, complex directivity patterns and complex pressure reflection coefficients are measured as a function of a single space-time structure of the wave (up to a frequency of 4000Hz and an azimuthal wave number 6) and of flow velocity (up to Mach number 0.4) in a cylindrical duct located downstream the inlet. Experimental results of radiation from an unflanged duct are compared with theory. Effect of inlet contour and flow are deduced by comparing respectively unflanged duct and bellmouth measurements and, no flow and flow measurements with the bellmouth. Results are presented which indicate that the contour effect is significant near the cut-on frequency of a mode and emphasize the necessity for taking into account the inlet geometry in a radiation prediction. These results show also that internal flow has a weak effect on the amplitude of the directivity pattern

Ville, J. M.↗

Rigorous solutions for sound radiation from circular ducts with hyperbolic horns or infinite plane baffle

A rigorous treatment is presented of sound radiation from circular ducts with either a hyperbolic horn or an infinite plane baffle. In the analysis hyperboloidal wave functions are used, which are defined here, for the first time, as a class of eigensolutions of the wave equation for oblate spheroidal co-ordinates. The numerical results include the complex conversion (or reflection) coefficients and the radiation directivity for various incident wave modes, spinning modes as well as axisymmetric modes. The solutions are valid for the whole frequency range including frequencies above and below the cut-off frequencies of the duct modes involved.

Cho, Y. C.↗

Prediction of sound radiation from different practical jet engine inlets

Computer codes, capable of producing accurate results for nondimensional wave numbers (based on duct radius) of up to 20, were developed and used to generate results for various other inlet configurations. Both reflection coefficients and radiation patterns were calculated by the integral solution procedure for the following five inlet configurations: the NASA Langley Bellmouth, the NASA Lewis JT-15D-1 ground test nacelle, and three hyperbolic inlets of 50, 70, and 90 degrees. Results obtained are compared with results from other experimental and theoretical studies.

Zinn, B. T.↗

Fabrication and surface characterization of composite refractory compounds suitable for thermionic converters

Thermal faceting was observed for the high index planes of LaB6. The (100), (110), and (111) planes were found to be the most thermodynamically stable faces in vacuum in a study of electrode materials for thermionic emitters. The properties of adsorbed carbon, cesium, and cesium-oxygen layers were investigated on LaB6 single crystal surfaces as well as on Zr/0/W(100) and W(100). Cesium was found to increase electron reflection near the collision threshold on LaB6(100) and W(100) and to decrease the reflection on Zr/0/W(100). This difference may be explained by the unusually high threshold reflection coefficient of Zr/0/W without adsorbed cesium.

Davis, P. R.↗

Potential application of satellite radar to monitor soil moisture

The microwave backscattering characteristics of soils as a function of moisture content are reviewed as a basis for the evaluation of the applicability of satellite radar to soil moisture determinations. Results of experiments showing the dependence of the complex dielectric constant, power reflection coefficient and backscattering coefficient of soil on its volumetric moisture content are presented. Results of a research program using the truck-mounted University of Kansas microwave active spectrometer to determine if, by the proper choice of sensor frequency, polarization and incidence, the sensor dynamic range in response to moisture variations may be greater than its response to other variations are considered in detail, and the optimum conditions of frequency (between 4 and 5 GHz), angular incidence (between 7 and 20 deg from nadir) and polarization (HH) obtained are indicated. An empirical model for the backscattering coefficient as a function of gravimetric moisture content derived on the basis of the experimental data is presented, and it is noted that available airborne and spaceborne data confirm the results of the ground-based sensors.

Ulaby, F. T.↗

Application of 'steady' state finite element and transient finite difference theory to sound propagation in a variable duct - A comparison with experiment

Experimental data are presented for sound propagation in a simulated infinite hard wall duct with a large change in duct cross sectional area. The data are conveniently tabulated for further use. The 'steady' state finite element theory of Astley and Eversman (1981) and the transient finite difference theory of White (1981) are in good agreement with the data for both the axial and transverse pressure profiles and the axial phase angle. Therefore, numerical finite difference and finite element theories appear to be ideally suited for handling duct propagation problems which encounter large axial gradients in acoustic parameters. The measured energy reflection coefficient agrees with the values from the Astley-Eversman modal coupling model.

Baumeister, K. J.↗

Design of throat section of conical corrugated horns

A simple graphical method is presented for designing the junction between a conical corrugated horn and a smooth-wall circular waveguide. The method gives both an insight into the field behavior along the horn and an indication of the reflection coefficient at the horn-waveguide junction. It has been applied to the design of the DSN X-S band feedhorn and an improved corrugated throat section.

Olver, A. D.↗

Prediction of sound radiation from different practical jet engine inlets

The computer codes necessary for this study were developed and checked against exact solutions generated by the point source method using the NASA Lewis QCSEE inlet geometry. These computer codes were used to predict the acoustic properties of the following five inlet configurations: the NASA Langley Bellmouth, the NASA Lewis JT15D-1 Ground Test Nacelle, and three finite hyperbolic inlets of 50, 70 and 90 degrees. Thirty-five computer runs were done for the NASA Langley Bellmouth. For each of these computer runs, the reflection coefficient at the duct exit plane was calculated as was the far field radiation pattern. These results are presented in both graphical and tabular form with many of the results cross plotted so that trends in the results verses cut-off ratio (wave number) and tangential mode number may be easily identified.

Zinn, B. T.↗