Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redundancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Utilization of low-redundancy convolutional codes

This paper suggests guidelines for the utilization of low-redundancy convolutional codes with emphasis on providing a quick look capability (no decoding) and a moderate amount of coding gain. The performance and implementation complexity of threshold, Viterbi, and sequential decoding when used with low-redundancy, systematic, convolutional codes is discussed. An extensive list of optimum, short constraint length codes is found for use with Viterbi decoding, and several good, long constraint length codes are found for use with sequential decoding.

Cain, J. B.↗

Management of analytical redundancy in digital flight control systems for aircraft

This paper presents a design method for optimal redundancy management for nonlinear systems with application to highly maneuvering aircraft. The approach taken is based on selecting the failure states to be covered by the system design and constructing a cost function that represents the cost of making an incorrect decision. The decision logic which minimizes the cost requires a bank of extended Kalman filters running in parallel. This produces a severe computational requirement. To reduce this requirement, a suboptimal logic is developed based on using a nonlinear single-stage prediction algorithm in the filters with filter gains and decision logic selected using steady-state results obtained from a linearization of the vehicle and sensor dynamics. The design process is then applied to designing a redundancy management system for the F8-C aircraft. Results indicate that the system is superior in failure detection to a system using the same structure but using a linear single-stage prediction algorithm in the filters.

Montgomery, R. C.↗

Study of the redundancy of telemetry information of the Luna-9 and Luna-13 automatic lunar probes

Knowledge of the statistical characteristics of natural telemetry information is important for the development of principles and methods of reduction of redundancy of telemetry messages as well as planning of on-board information compression devices. An evaluation was made to determine these characteristics for the telemetry information of the Luna-9 and Luna-13 automatic lunar probe, to allow estimation of the redundancy of the information. Histograms as well as numerical characteristics were used.

Kantor, A. V.↗

Architectural concepts and redundancy techniques in fault-tolerant computers

This paper presents a description of redundancy techniques employed in the design of fault-tolerant computers, and a discussion of the effects of functional requirements, technology constraints, and cost considerations which enter into the choice of these techniques. The STAR computer, developed at the Jet Propulsion Laboratory for long-duration planetary spacecraft missions, is discussed along with several later fault-tolerant computer designs. The class of computers described in this paper employs dynamic redundancy, i.e., the machine is divided into a set of submodules, each with standby spares; a special hard core monitor unit detects and diagnoses faults, and effects automated recovery by replacing failed parts.

Rennels, D. A.↗

Redundancy of hydraulic flight control actuators

The constraint of requiring airplanes to have inherent aerodynamic stability can be removed by using active control systems. The resulting airplane requires control system reliability approaching that of the basic airframe. Redundant control actuators can be used to achieve the required reliability, but create mechanization and operational problems. Of numerous candidate systems, two different approaches to solving the problems associated with redundant actuators which appear the most likely to be used in advanced airplane control systems are described.

Chenoweth, C. C.↗

On redundant variables in Lagrangian mechanics, with applications to perturbation theory and KS regularization

It is shown that it is possible to make a change of variables in a Lagrangian in such a way that the number of variables is increased. The Euler-Lagrange equations in the redundant variables are obtained in the standard way (without the use of Lagrange multipliers). These equations are not independent but they are all valid and consistent. In some cases they are simpler than if the minimum number of variables are used. The redundant variables are supposed to be related to each other by several constraints (not necessarily holonomic), but these constraints are not used in the derivation of the equations of motion. The method is illustrated with the well known Kustaanheimo-Stiefel regularization. Some interesting applications to perturbation theory are also described.

Broucke, R.↗

Reconfigurable redundancy management for aircraft flight control

A highly fault tolerant digital computer system has been configured based on extensive experience with flight proven, redundant digital flight control systems. The feasibility of minimizing hardware complexity is shown while maintaining high levels of fault tolerance. The emerging hardware design combines reconfiguration concepts with conventional hardware redundancy techniques and special operational software to provide dual fail operate performance with a basic triplex system. The design provides high reliability and flight safety, enhances maintainability, and reduces life cycle cost while offering improved performance for future aircraft.

Bosch, J. A.↗

Model for redundant-sensor signal errors

Report describes application of order statistics to analysis of failure modes in redundant systems. Report provides detailed mathematical discussion of approach, accompanied by graphs and equations. Techniques are relevant to process that demand high reliability, such as manufacture of dangerous chemicals. It also includes discussion of quad-redundant system.

Sowada, D. J.↗

Synchronous transfer circuits for redundant systems

Circuit arrangements for flip-flops, counters, and clock drivers in redundant systems ensure that control is synchronously transferred to surviving components when failure occurs. In addition to original application to spacecraft systems, redundant circuits have terrestrial uses in power generators, solar-energy converters, computers, vehicle controllers, and other systems demanding high reliability.

Nagano, S.↗

Evaluation of the F-8 DFBW analytic redundancy sensor FDI algorithm using telemetry data

In this paper we present a reliable technique for failure detection and identification (FDI) for dual redundant flight control sensors aboard the NASA F-8 digital fly-by-wire (DFBW) aircraft, and we discuss the successful application of the technique to identifying failures injected on test flight telemetry data. The technique exploits the analytic redundancy which exists as relationships among variables being measured by dissimilar instruments. With straightforward modification the technique may be extended to provide failure monitoring of a single remaining sensor after the identified failure of its companion sensor.

Deckert, J. C.↗

F-8 DFBW sensor failure identification using analytic redundancy

The structure of a sensor failure detection and identification system designed for the NASA F-8 DFBW aircraft is outlined. The system is for use in a dual-redundant environment, and it takes maximal advantage of all functional relationships among the sensed variables. The identification logic uses the quality sequential probability ratio, which provides a useful on-line measure of confidence in the various forms of analytic redundancy. Preliminary simulation results indicate good behavior of the analytic decision statistic, based on the sequential probability ratio test.

Deckert, J. C.↗

Redundant system reliability analysis

Computer Aided Redundant System Reliability Analysis (CARSARA) program facilitates reliability assessment of fault-tolerance reconfigurable systems. CARSRA accounts for influences from transient faults and is used to model wide range of redundancy management strategies.

Masreliez, C. J.↗

Application of fully stressed design procedures to redundant and non-isotropic structures

An evaluation is presented of fully stressed design procedures for sizing highly redundant structures including structures made of composite materials. The evaluation is carried out by sizing three structures: a simple box beam of either composite or metal construction; a low aspect ratio titanium wing; and a titanium arrow wing for a conceptual supersonic cruise aircraft. All three structures are sized by ordinary fully-stressed design (FSD) and thermal fully stressed design (TFSD) for combined mechanical and thermal loads. Where possible, designs are checked by applying rigorous mathematical programming techniques to the structures. It is found that FSD and TFSD produce optimum designs for the metal box beam, but produce highly non-optimum designs for the composite box beam. Results from the delta wing and arrow wing indicate that FSD and TFSD exhibits slow convergence for highly redundant metal structures. Further, TFSD exhibits slow oscillatory convergence behavior for the arrow wing for very high temperatures. In all cases where FSD and TFSD perform poorly either in obtaining nonoptimum designs or in converging slowly, the assumptions on which the algorithms are based are grossly violated. The use of scaling, however, is found to be very effective in obtaining fast convergence and efficiently produces safe designs even for those cases when FSD and TFSD alone are ineffective.

Adelman, H. M.↗

New Algorithms Manage Fourfold Redundancy

Redundant sensors, actuators, and computers improve reliability of complex control systems, such as those in nuclear powerplants and aircraft. If one or more redundant elements fail, another takes over so that normal operation is not interrupted. Quad selection filter rejects data from null-failed and hardover-failed and hardover-failed units.

Gelderloos, H. C.↗

Description of a dual fail-operational redundant strapdown inertial measurement unit for integrated avionics systems research

Attention is given to a redundant strapdown inertial measurement unit for integrated avionics. The system consists of four two-degree-of-freedom turned rotor gyros and four two-degree-of-freedom accelerometers in a skewed and separable semi-octahedral array. The unit is coupled through instrument electronics to two flight computers which compensate sensor errors. The flight computers are interfaced to the microprocessors and process failure detection, isolation, redundancy management and flight control/navigation algorithms. The unit provides dual fail-operational performance and has data processing frequencies consistent with integrated avionics concepts presently planned.

Bryant, W. H.↗

Design of a developmental dual fail operational redundant strapped down inertial measurement unit

An experimental redundant strap-down inertial measurement unit (RSDIMU) is being developed at NASA-Langley as a link to satisfy safety and reliability considerations in the integrated avionics concept. The unit consists of four two-degrees-of-freedom (TDOF) tuned-rotor gyros, and four TDOF pendulous accelerometers in a skewed and separable semi-octahedron array. The system will be used to examine failure detection and isolation techniques, redundancy management rules, and optimal threshold levels for various flight configurations. The major characteristics of the RSDIMU hardware and software design, and its use as a research tool are described.

Morrell, F. R.↗

Description of a dual fail operational redundant strapdown inertial measurement unit for integrated avionics systems research

An experimental redundant strapdown inertial measurement unit (RSDIMU) is developed as a link to satisfy safety and reliability considerations in the integrated avionics concept. The unit includes four two degree-of-freedom tuned rotor gyros, and four accelerometers in a skewed and separable semioctahedral array. These sensors are coupled to four microprocessors which compensate sensor errors. These microprocessors are interfaced with two flight computers which process failure detection, isolation, redundancy management, and general flight control/navigation algorithms. Since the RSDIMU is a developmental unit, it is imperative that the flight computers provide special visibility and facility in algorithm modification.

Bryant, W. H.↗

Reconfiguring redundancy management

A redundancy management system is described wherein input signals from a sensor are provided redundantly in parallel so that a primary control signal may be selected. Median value signals for groups of three sensors are detected in median value selectors of selection filter. The detected median value signals are then also compared in a subtractor/comparator to determine whether any of them exceed the others by an amount greater than the signal level for a failed sensor. If so, the exceeding detected medium value signal is sent to a control computer as the primary control signal. If not, the lowest level detected medium value signal is sent as the primary control signal.

Gelderloos, H. J. C.↗