Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “raster”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Retinally stabilized differential resolution television display

A remote television viewing system employing an eye tracker is disclosed, wherein a small region of the image appears in high resolution, and the remainder of the image appears in low resolution. The eye tracker monitors the position of the viewer's line of sight. The eye tracker position data is transmitted to the remote television camera and control. Both the remote camera and television display are adapted to have selectable high-resolution and low resolution raster scan modes. The position data from the eye tracker is used to determine the point at which the high-resolution scan is to commence. The video data defining the observed image is encoded in a novel format, wherein in each data field, the data representing the position of the high resolution region of predetermined size appears first, followed by the high resolution zone video data and then the low-resolution region data. As the viewer's line of sight relative to the displayed image changes, the position of the high resolution region changes to track the viewer's line of sight.

Ruoff, C. F., Jr.↗
NASA NTRS1984

Soft X-ray polychromator for the Solar Maximum Mission

The XRP was designed to measure the following temporal and spatial properties of the active and flaring Sun: electron temperature, departures from steady state, ion kinetic temperatures, and electron density. The Bent Crystal Spectrometer (BCS) is capable of measuring the broadening and blue shifts often observed in the impulsive phase of flares. The six simultaneous line fluxes indicative of six different temperatures of formation observable by the Flat Crystal Spectrometer (FCS) allows the derivation of the differential emission measure of the plasma at each raster point. During the operational periods of the XRP hundreds of flares of C-level (GOES classification) were observed and brighter in both the FCS and BCS, including 5 X-flares. Associated theoretical work in atomic physics, stimulated in part by the promise of XRP measurements, has benefitted from the experimental data on solar plasmas which the XRP has provided in abundance.

Haisch, B. M.↗
NASA NTRS1985

Fabrication of optical components for the ultraviolet spectrometer and polarimeter on the Solar Maximum Mission

The Solar Maximum Mission (SMM) satellite was launched in February 1980 into a 573 km high circular orbit. It contains X-ray, UV, and optical instruments for the simultaneous observation of solar flares. The ultraviolet spectrometer and polarimeter (UVSP) is one of these instruments. The objectives of the UVSP require the employment of a raster scanning telescope to study the spatial dynamics of flares, the use of a high resolution spectrometer to select and scan spectral lines for temperature and velocity diagnostics, and the utilization of a polarimeter to measure magnetic fields in the solar transition zone. The present paper has the objective to provide a description of the optical fabrication techniques developed for the instrument. Attention is given to telescope mirrors, metering rods, the Ebert mirror, grating blanks, a four-mirror polarizer, beam splitter assemblies, beam splitter fabrication, deflector mirrors, and shipping containers.

Spencer, R. S.↗
NASA NTRS1985

Cartographic potential of SPOT image data

In late 1985, the SPOT (Systeme Probatoire d'Observation de la Terre) satellite is to be launched by the Ariane rocket from French Guiana. This satellite will have two High Resolution Visible (HRV) line array sensor systems which are capable of providing monoscopic and stereoscopic coverage of the earth. Cartographic applications are related to the recording of stereo image data and the acquisition of 20-m data in a multispectral mode. One of the objectives of this study involves a comparison of the suitability of SPOT and TM image data for mapping urban land use/cover. Another objective is concerned with a preliminary assessment of the potential of SPOT image data for map revision when merged with conventional map sheets converted to raster formats.

Welch, R.↗
NASA NTRS1986

Semiconductor Laser With Two-Dimensional Beam Steering

Modification of monolithic semiconductor injection laser capable of one-dimensional electronic beam steering enables deflection of beam in second direction. Such laser chip provides beam pointing or raster scanning for applications in optical communications, data processing, image scanning, and optical ranging.

Katz, J.↗
NASA NTRS1986

Photocurrent Imaging Detects Solar-Module Defects

Raster-scanned laser beam excites photocurrents in thin-film amorphous silicon devices. Solar-cell laser scanner uses two galvanometer-driven mirrors to scan laser-beam spot over surface of module or cell under test. Position signals from scan controllers used to index storage of photocurrent signal data in scan-converter image memory. Stored image displayed on television monitor.

Kim, Q.↗
NASA NTRS1985

PIFEX: An advanced programmable pipelined-image processor

PIFEX is a pipelined-image processor being built in the JPL Robotics Lab. It will operate on digitized raster-scanned images (at 60 frames per second for images up to about 300 by 400 and at lesser rates for larger images), performing a variety of operations simultaneously under program control. It thus is a powerful, flexible tool for image processing and low-level computer vision. It also has applications in other two-dimensional problems such as route planning for obstacle avoidance and the numerical solution of two-dimensional partial differential equations (although its low numerical precision limits its use in the latter field). The concept and design of PIFEX are described herein, and some examples of its use are given.

Gennery, D. B.↗
NASA NTRS1986

Time and space integrating acousto-optic folded spectrum processing for SETI

Time and space integrating folded spectrum techniques utilizing acousto-optic devices (AOD) as 1-D input transducers are investigated for a potential application as wideband, high resolution, large processing gain spectrum analyzers in the search for extra-terrestrial intelligence (SETI) program. The space integrating Fourier transform performed by a lens channels the coarse spectral components diffracted from an AOD onto an array of time integrating narrowband fine resolution spectrum analyzers. The pulsing action of a laser diode samples the interferometrically detected output, aliasing the fine resolution components to baseband, as required for the subsequent charge coupled devices (CCD) processing. The raster scan mechanism incorporated into the readout of the CCD detector array is used to unfold the 2-D transform, reproducing the desired high resolution Fourier transform of the input signal.

Wagner, K.↗
NASA NTRS1986

Display system software for the integration of an ADAGE 3000 programmable display generator into the solid modeling package C.A.D. software

A software system that integrates an ADAGE 3000 Programmable Display Generator into a C.A.D. software package known as the Solid Modeling Program is described. The Solid Modeling Program (SMP) is an interactive program that is used to model complex solid object through the composition of primitive geomeentities. In addition, SMP provides extensive facilities for model editing and display. The ADAGE 3000 Programmable Display Generator (PDG) is a color, raster scan, programmable display generator with a 32-bit bit-slice, bipolar microprocessor (BPS). The modularity of the system architecture and the width and speed of the system bus allow for additional co-processors in the system. These co-processors combine to provide efficient operations on and rendering of graphics entities. The resulting software system takes advantage of the graphics capabilities of the PDG in the operation of SMP by distributing its processing modules between the host and the PDG. Initially, the target host computer was a PRIME 850, which was later substituted with a VAX-11/785. Two versions of the software system were developed, a phase 1 and a phase 2. In phase 1, the ADAGE 3000 is used as a frame buffer. In phase II, SMP was functionally partitioned and some of its functions were implemented in the ADAGE 3000 by means of ADAGE's SOLID 3000 software package.

Montoya, R. J.↗
NASA NTRS1986

Polar-cap and coronal-hole-associated brightenings of the Sun at millimeter wavelengths

Mapping observations of the Sun at millimeter wavelengths were made on 16 to 22 July 1984 with the 45-m telescope of the Nobeyama Radio Observatory. Seven 36-GHz (8.3-mm) maps and five 98-GHz (3.1-mm) maps were taken with half-power beam widths of 46 arc sec and 17 arc sec, respectively. Instead of the conventional rastering technique, a radial-scan method was adopted in which every scan passes through the disk center. Accordingly, the variation of the atmosphere attenuation due to changes in the weather conditions can be easily estimated and removed by using the brightness values at the disk center as calibration data. Also, the pointing errors of the telescope due to the high-speed scans can be corrected by using the solar limbs as position references. The rms residual errors in relative brightness and position after the corrections were estimated to be approx. 2% and approx. 5 arc sec respectively. To further reduce these errors, enabled us to make high-quality maps with with or approx. 1% uncertainty in brightness. Here and in the following, brightness is expressed in terms of the average brightness of the solar disk as a unit. Note that the brightness temperature of the quiet Sun is approx. 8000 K and approx. 6000 K at 36 GHz and 98 GHz, respectively.

Kosugi, T.↗
NASA NTRS1985

Energy release topology in a multiple-loop solar flare

The temporal and spatial structures of the UV and X-ray emissions and the magnetic field configuration in the November 12, 1980 flare observed from SMM have been studied. The UV observations were done in the O V and Fe XXI lines with a spatial resolution of 10 arcsec. The observations show that the impulsive UV bursts, and also the hard X-ray bursts by their temporal correlation with the impulsive O V emission, occurred in small localized kernels. By comparing the O V, Fe XXI, and X-ray raster images of the flare with the magnetogram, these emission kernels were identified as footpoints of interacting magnetic flux loops. The temporal evolution of the O V/Fe XXI emission shows that there was considerable preheating in the flare plasma some 8-9 minutes prior to the onset of the main hard X-ray bursts. The results are interpreted as indicating that the primary flare energy release occurred in a highly sheared multiloop structure, which lies along a magnetic neutral line. By either beam particle propagation or convective motion, flare energy is transported via a common footpoint to another loop which brightened later. The preheating of the flare plasma is shown to create a more favorable environment for energetic particle acceleration which resulted in the main impulsive hard X-ray bursts.

Cheng, C.-C.↗
NASA NTRS1984

Microcomputer-based, statewide, digital land-surface information

The Center for Remote Sensing at Michigan State University is developing a statewide data base of land-surface information on an ERDAS 400 microcomputer system. The raster file structure uses 1 square-kilometer grid cells and contains 633 columns and 733 rows. The initial elements of this data base include (1) augmented Level I land cover; (2) average available soil water capacity; (3) topographic information; and (4) multiple-vector, windward distance to the Great Lakes. Other elements will be added to the data base in the future in order to serve the multidisciplinary needs of the research community at Michigan State University.

Lusch, D. P.↗
NASA NTRS1986

A comparison of photospheric electric current and ultraviolet and X-ray emission in a solar active region

This paper presents an extensive set of coordinated observations of a solar active region, taking into account spectroheliograms obtained with the aid of the Solar Maximum Mission (SMM) Ultraviolet Spectrometer Polarimeter (UVSP) instrument, SMM soft X-ray polychromator (XRP) raster maps, and high spatial resolution ultraviolet images of the sun in Lyman-alpha and in the 1600 A continuum. These data span together the upper solar atmosphere from the temperature minimum to the corona. The data are compared to maps of the inferred photospheric electric current derived from the Marshall Space Flight Center (MSFC) vector magnetograph observations. Some empirical correlation is found between regions of inferred electric current density and the brightest features in the ultraviolet continuum and to a lesser extent those seen in Lyman-alpha within an active region.

Haisch, B. M.↗
NASA NTRS1985

Infrared studies of the bipolar nebula OHO739

Infrared studies have been made of the M9 giant OHO739, which is embedded in a bipolar nebula, in order to study the structure and density distribution of the circumstellar disk, and preliminary results are reported. The degree of polarization across the 3.1 micron ice band in an 8 arcsec beam centered at the 2.2 micron peak is found to increase with extinction in the ice band, as expected for a bipolar scattering nebula. A distance of 2 kpc is inferred from the tilt angle of the bipolar axis and phase lag measurements of the OH maser. Maps made in the K band and in narrow bands at 2.85, 3.1, and 3.5 microns by raster-scanning OHO739 are presented. In all maps, the object is clearly elongated along the bipolar axis. Patterns of increases and decreases in extinction in the object are inferred to indicate that ice particles are widespread through the nebula and not just concentrated in the disk.

Tielens, A. G. G. M.↗
NASA NTRS1986

Orthographic terrain views using data derived from digital elevation models

A fast algorithm for producing three-dimensional orthographic terrain views uses digital elevation data and co-registered imagery. These views are created using projective geometry and are designed for display on high-resolution raster graphics devices. The algorithm's effectiveness is achieved by (1) the implementation of two efficient gray-level interpolation routines that offer the user a choice between speed and smoothness, and (2) a unique visible surface determination procedure based on horizon angles derived from the elevation data set.

Dubayah, R. O.↗
NASA NTRS1986

Techniques for increasing the update rate of real-time dynamic computer graphic displays

This paper describes several techniques which may be used to increase the animation update rate of real-time computer raster graphic displays. The techniques were developed on the ADAGE RDS 3000 graphic system in support of the Advanced Concepts Simulator at the NASA Langley Research Center. The first technique involves pre-processing of the next animation frame while the previous one is being erased from the screen memory. The second technique involves the use of a parallel processor, the AGG4, for high speed character generation. The description of the AGG4 includes the Barrel Shifter which is a part of the hardware and is the key to the high speed character rendition. The final result of this total effort was a four fold increase in the update rate of an existing primary flight display from 4 to 16 frames per second.

Kahlbaum, W. M., Jr.↗
NASA NTRS1986

Generation of attenuation corrected images from lidar data

The interpretation of data generated by aerosol backscatter lidars is often facilitated by presentation of RHI and PPI images. These pictures are especially useful in studies of atmospheric boundary layer structure where convective elements, stratifications and aerosol laden plumes can be easily delineated. Procedures used at the University of Wisconsin to generate lidar images on a color enhanced raster scan display are described.

Eloranta, E. W.↗
NASA NTRS1987

Color postprocessing for 3-dimensional finite element mesh quality evaluation and evolving graphical workstation

Three general tasks on general-purpose, interactive color graphics postprocessing for three-dimensional computational mechanics were accomplished. First, the existing program (POSTPRO3D) is ported to a high-resolution device. In the course of this transfer, numerous enhancements are implemented in the program. The performance of the hardware was evaluated from the point of view of engineering postprocessing, and the characteristics of future hardware were discussed. Second, interactive graphical tools implemented to facilitate qualitative mesh evaluation from a single analysis. The literature was surveyed and a bibliography compiled. Qualitative mesh sensors were examined, and the use of two-dimensional plots of unaveraged responses on the surface of three-dimensional continua was emphasized in an interactive color raster graphics environment. Finally, a postprocessing environment was designed for state-of-the-art workstation technology. Modularity, personalization of the environment, integration of the engineering design processes, and the development and use of high-level graphics tools are some of the features of the intended environment.

Panthaki, Malcolm J.↗