Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “propylene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

On the mechanism of radiation and thermal-induced degradation of the insulation cables in nuclear power plants-the presence of long-lived polyenyl C-centered radicals

Radiolytically and thermally produced long-lived polyenyl C-centered radicals in the nuclear power plants’ insulation cables are detected and measured after more than 45 months of aging since the irradiation and the thermal treatment. Electron Paramagnetic Resonance (EPR) results of the irradiated Cross-linked Polyethylene (XLPE) and Ethylene Propylene Rubber (EthProRu), used as primary insulation materials at Nuclear Power Plants (NPP), clearly demonstrate the presence of polyenyl radicals along with allyl and peroxyl radicals. The yields of these free radicals are dose-rate dependent. EPR results also show the presence of the long-lived polyenyl along with allyl and peroxyl free radicals in the thermally treated XLPE, and EthProRu. These free radicals can cause a major failure in the performance of these cables in NPPs. Besides, the results showed the enhancement in the oxidation reactions due to the migration of copper ions from the conductor to the bulk of the insulation. Further, this study also shows that the oxidation index (OI) and Elongation at Break (EAB) increases and decreases respectively at higher doses and temperatures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Lithium-ion hopping weakens thermal stability of LiPF 6 carbonate electrolytes

Lithium hexafluorophosphate (LiPF 6 )-based carbonate electrolytes are widely used in commercial lithium-ion batteries (LIBs), but their thermal instability limits the cycle life and safety of LIBs at elevated temperatures. Few studies have yielded insight into the initial PF 6 — decomposition reaction that promotes thermal instability of LiPF6-based electrolytes. Here, we find that lithium-ion hopping assisted by the overall reorientational motion of propylene carbonate molecules facilitates PF 6 — decomposition at elevated temperatures in 1 M LiPF 6 /propylene carbonate electrolyte. Further, we demonstrate that urea additives, by preventing lithium-ion hopping, suppress the initial LiPF 6 decomposition reaction and enhance the thermal stability of the electrolyte. LIB cell tests with LiNi 0.6 Mn 0.2 Co 0.2 O 2 ||Li 4 Ti 5 O 12 show improved LIB performance at elevated temperatures with the thermally stabilized electrolyte. This study provides key insights into the design of thermally stable LiPF 6 -based carbonate electrolytes for improving the cycle life, calendar life, and safety of LIBs in elevated-temperature applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Design of robust and versatile hydrocarbon-based single-ion-conducting polymer electrolytes

Hydrocarbon-based polymers offer several advantages, including lower environmental impacts, cost effectiveness, and the ability to finely tune properties. Here, we have developed trifluoromethanesulfonimide (TFSI)-functionalized poly(norbornene) (PNB) polymers utilizing a specifically designed oxa-Michael addition of a vinyl TFSI anion to an alcohol. Our results reveal that PNB-TFSI derivatives exhibit superior thermal stability and mechanical robustness compared with Nafion. The optimized PNB-TFSI-H-48 polymer (IEC 1.86 mmol/g) exhibits equivalent performance to Nafion as an anode ionomer in a proton exchange membrane fuel cell. Exchanging the counter ion to Li + enables PNB-TFSI to be used for Li-ion battery applications. Propylene carbonate plasticized PNB-TFSI derivatives achieve an Li-ion conductivity of over 10 −5 S/cm at 30°C. This Li polymer electrolyte exhibits excellent electrochemical stability (5 V vs. Li + /Li) and good cycling in a Li symmetric cell. These results highlight the potential and rational design of PNB-TFSI polymers for next-generation energy storage and conversion technologies.

08 HYDROGEN↗
DOE OSTI2021

Measurements of Intermediate Species in Fuel-Rich Oxidation of Ethylene, Toluene, and n -Decane

Polycyclic aromatic hydrocarbons (PAHs) are important precursors to the formation of soot and are also pollutant emissions from combustion devices, including internal combustion engines. To understand the formation of PAHs, the low-molecular-weight hydrocarbon chemistry leading to their formation needs to be understood. Toward this goal, fuel-rich oxidation of three different hydrocarbons, i.e., ethylene, toluene, and n-decane, has been investigated in an atmospheric pressure flow reactor at varying temperatures (1000–1350 K), equivalence ratios (φ = 3.0–12.0), and residence times of 0.25–1.5 s. The major C 1 to C 7 intermediates, such as methane, acetylene, ethylene, allene, propyne, propylene, vinylacetylene, 1,3-butadiene, cyclopentadiene, benzene, and toluene, were quantified using a gas chromatograph equipped with a flame ionization detector. The experimental tendency of intermediate species formation, e.g., the dependence of temperature, equivalence ratio, and residence time, was similar in ethylene oxidation and n-decane oxidation. The concentrations of intermediate species up to C 4 were higher in ethylene/n-decane oxidation than toluene oxidation, while a nearly equal or larger amount of C5–C7 species was produced in toluene oxidation. The experimental data were compared with modeling results using a detailed chemical kinetic mechanism. The calculated data using the kinetic model were in agreement with the experimental results. Additionally, a comprehensive kinetic analysis on the reaction pathways of each species was conducted to assess the differences in the oxidation chemistry with the change in the structure of hydrocarbons. In particular, in-depth analysis of benzene formation was performed, elucidating that two benzene formation pathways were important in ethylene and n-decane oxidation: (1) H elimination of the 2,4-cyclohexadienyl radical produced from the isomerization of the 2,4-cyclopentadienylmethyl radical, and (2) dehydrogenation of cyclohexadiene produced from reactions of vinyl radical with 1,3-butadiene. In toluene oxidation, it was found that benzene was primarily produced from toluene through the replacement of the methyl group with hydrogen.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Understanding Solvation Behavior of the Saturated Electrolytes with Small/Wide-Angle X-ray Scattering and Raman Spectroscopy

Concentrated electrolytes are attracting significant attention because the solvation structures could stabilize the interface, encouraging novel electrolyte development for high-voltage and long-cycle-life batteries. Saturated electrolytes, which have the highest salt concentrations, have been rarely studied because of their shortcomings of high viscosity and low ionic conductivity. Nevertheless, the exciting solvation structure in saturated solution is still worth studying, significantly broadening the comprehensive understanding of the solvation processes. In this work, we investigate the saturated lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) dissolved in seven different organic solvents, including propylene carbonate (PC), tetrahydrofuran (THF), acetonitrile (ACN), dimethylformamide (DMF), 1,2-dimethoxyethane (DME), diethylene glycol dimethyl ether (Diglyme), and tetraethylene glycol dimethyl ether (Tetraglyme). The combined small/wide-angle X-ray scattering and Raman spectroscopy are employed to study the global and local solvation structure. Here, this work demonstrates a method for detecting the structure of liquids, which will facilitate the study of structure–performance relationships and the screening of new electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Comparative Techno-economic Analysis and Life Cycle Assessment of Producing High-Value Chemicals and Fuels from Waste Plastic via Conventional Pyrolysis and Thermal Oxo-degradation

The rapid rise in global plastic production in recent decades has resulted in the massive generation of plastic waste. Over 75% of the plastic waste generated in the United States was sent to landfills, with a meager 8.7% recycled. Plastics are valuable feedstocks for platform chemicals and fuels. Chemical upcycling of waste high-density polyethylene (HDPE) is gaining more attention as a potentially feasible and environmentally friendly plastic waste management technology. Conventional pyrolysis (CPY) and thermal oxo-degradation (TOD) are two chemical upcycling technologies actively researched for decomposing waste HDPE into valuable chemicals and fuels. However, there are few studies on the techno-economic analysis (TEA) and life cycle assessment (LCA) of these technologies for converting waste HDPE to valuable products. This study conducts a comparative TEA and LCA study of the thermochemical decomposition of waste HDPE to produce gaseous (ethylene and propylene) and liquid (naphtha, diesel, and wax) products by CPY and TOD. The study elucidates and compares the impact of hydrocracking longer chain hydrocarbons to produce more valuable products on the TEA and LCA. The TEA showed that the fixed capital investment could range from $\$32.5$ million for TOD without hydrocracking to $\$244$ million for CPY with hydrocracking scenarios. Annual revenues range from $\$28.1$ million to $\$71.5$ million in favor of scenarios with hydrocracking. However, the net present value ranges from $\$1.4$ million to $\$265.8$ million in favor of scenarios without hydrocracking. Sensitivity analysis showed that fixed capital cost, facility capacity, and product prices have the biggest impact on the process economics of the facilities, while utilities and waste transportation to refineries have the biggest impact on environmental impacts. Here, the LCA showed that primary products from scenarios without hydrocracking can be more environmentally friendly than virgin products from petroleum processes. However, TOD and CPY with hydrocracking primary products have more emissions than those of virgin products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Decoding the Effect of Anion Identity on the Solubility of N -(2-(2-Methoxyethoxy)ethyl)phenothiazine (MEEPT)

Variations in the solubility of redox-active organic molecules (ROM) of interest for nonaqueous redox flow batteries (RFB), especially as the ROM state-of-charge changes during charge-discharge cycling, present significant molecular design challenges. The situation is further complicated as ROM solubility can be regulated by the choice of electrolyte salt and solvent that together with the ROM comprise the catholyte or anolyte (redox electrolyte) formulation, presenting materials design challenges. The ROM N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT) is a viscous liquid at room temperature and is miscible in several organic solvents, including acetonitrile and propylene carbonate. The MEEPT radical cation (MEEPT +· ) paired with tetrafluoroborate (BF 4 - ) in acetonitrile presents a 0.5 M solubility, a dramatic decrease when compared to the viscous liquid of neutral MEEPT. Here, in this study, we present a joint experimental, regression modeling, and molecular dynamics (MD) simulations investigation to explore MEEPT-X (where X represents the counteranion) salt solubility variability as a function of concentration and counteranion chemistry in acetonitrile. We find a strong dependence of the salt solubility on the counteranion and relate these findings to explicit intermolecular interactions between MEEPT +· and the counteranion in the electrolyte solution.

Perera, Anton S. [Univ. of Kentucky, Lexington, KY↗
DOE OSTI2022

Mechanistic Interpretations and Insights for the Oxidative Dehydrogenation of Propane via CO 2 over Cr 2 O 3 /Al 2 O 3 Catalysts

Oxidative dehydrogenation (ODH) of alkanes using carbon dioxide as a soft oxidant has recently emerged as a potentially attractive alternative to steam cracking for the production of light olefins. To elucidate reaction pathways and their dependence on the operating conditions, CO 2 -assisted propane dehydrogenation over a redox-active Cr 2 O 3 /Al 2 O 3 catalyst was examined in a packed bed reactor as a function of temperature, Cr 2 O 3 /CO 2 feed ratio, and residence time. Previous ODH studies have largely focused on CO 2 -rich conditions with the aim of preventing coke formation. However, at T = 600 °C the present study finds that the use of propane-rich conditions (1 ≤ C 3 H 8 /CO 2 ≤ 2.5) maximizes propylene production and selectivity while maintaining catalyst stability. In this work, it is postulated that the selective Mars van Krevelen dehydrogenation process is optimized at these ratios. Excess CO 2 apparently promotes nonselective dehydrogenation and dry reforming pathways that generate additional CO, adversely impacting catalyst stability via the Bouduard reaction. This hypothesis is supported by complementary investigations of the reverse water gas shift reaction and thermodynamic analysis. The findings and methodology presented here are likely applicable to related ODH processes with other alkanes and redox-active catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Unified Workflow for Sensitivity-Based Kinetic Analysis in Microkinetic Models

Degrees of rate control (DRC), apparent activation energies, and apparent reaction orders are established local sensitivity diagnostics for interpreting microkinetic models, but applying them routinely to large mechanisms often requires substantial reaction-specific bookkeeping, perturbation design, and postprocessing. Here, in this study, we present a unified derivative-based workflow that evaluates these quantities from a single compiled reaction-network model and target-rate definition. For any user-provided microkinetic model, the workflow compiles the mechanism into stoichiometrically consistent mass-action rate equations, solves the surface dynamics, and uses automatic differentiation to compute sensitivities with respect to rate constants, temperature, and gas partial pressures. By combining their calculations in the same framework, the workflow clearly demonstrates the relationships between different DRCs and the apparent activation energy. Using existing examples of propylene partial oxidation and methane oxidation on Pd(100), we verify expected transient redistribution of rate control, distinguish net Campbell DRCs from one-sided directional sensitivities, and show how apparent activation energy can be reconstructed either from one-sided DRCs or from state-based DRCs while critical mechanistic insights are obtained consistently. In the methane oxidation case, a pathway-subset test further illustrates how a simplified mechanism preserves key kinetic signatures of a full model, showing the potential of our user-friendly tool for model construction beyond kinetic analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Formation of Gas-Phase Allyl Radicals from Glycerol on Rutile TiO2(110)

The reaction pathways of glycerol on partially reduced TiO2(110) have been studied by a combination of molecular beam dosing and temperature-programmed desorption (TPD). Glycerol is found to bind more strongly to TiO2(110) than glycols due to an additional hydroxyl group in the molecule. When the Ti surface sites are saturated by glycerol, the majority of glycerol molecules (~ 95%) undergo further reactions to yield carbon-free (water and hydrogen) and carbon-containing products that are desorbed during the TPD ramp. In contrast to glycols for which both water and hydrogen arise exclusively from the cleavage of glycol O-H bonds, we identify two distinct reaction channels resulting from the cleavage of O-H and C-H bonds, respectively, for both water and hydrogen evolution from glycerol on TiO2(110). Quantitative determination of the desorption yields of water and hydrogen reveals that the C-H bond scission channel which occurs at higher temperature than the O-H bond scission channel, is a minor reaction channel for water formation, while it is a major reaction channel responsible for hydrogen evolution. For the carbon-containing products, we exclude both carbon deposition and carbon oxides (CO and CO2) formation, and identify the allyl radical as the major carbon-containing product. The formation of the allyl radical is accompanied by the formation of various minor carbon-containing products including propylene, acrolein, allyl alcohol, acetone, formaldehyde and ethylene. The different surface chemistries observed between glycerol and simpler alcohols and glycols on TiO2(110), suggest that smaller oxygenates cannot serve as models for larger oxygenates in probing their reaction pathways on oxide surfaces. The new reaction channels observed for glycerol on TiO2(110) may open up a new way to convert bio-renewable glycerol directly to pure hydrogen and hydrocarbons on TiO2. This work was supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences, and performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

Chen, Long↗
DOE OSTI2023

Fraction of Free-Base Nicotine in Simulated Vaping Aerosol Particles Determined by X-ray Spectroscopies

A new generation of electronic cigarettes is exacerbating the youth vaping epidemic by incorporating additives that increase the acidity of generated aerosols, which facilitate uptake of high nicotine levels. We need to better understand the chemical speciation of vaping aerosols to assess the impact of acidification. Here we used X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to probe the acid-base equilibria of nicotine in hydrated vaping aerosols. Here we show that, unlike the behavior observed in bulk water, nicotine in the core of aqueous particles was partially protonated when the pH of the nebulized solution was 10.4, with a fraction of free-base nicotine (α FB ) of 0.34. Nicotine was further protonated by acidification with equimolar addition of benzoic acid (α FB = 0.17 at pH 6.2). By contrast, the degree of nicotine protonation at the particle surface was significantly lower, with 0.72 < α FB < 0.80 in the same pH range. The presence of propylene glycol and glycerol completely eliminated protonation of nicotine at the surface (α FB = 1) while not affecting significantly its acid-base equilibrium in the particle core. These results provide a better understanding of the role of acidifying additives in vaping aerosols, supporting public health policy interventions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Key Experimental Considerations When Evaluating Functional Ionic Liquids for Combined Capture and Electrochemical Conversion of CO 2

Ionic liquids (ILs) are considered functional electrolytes for the electrocatalytic reduction of CO 2 (ECO 2 R) due to their role in the double-layer structure formation and increased CO 2 availability at the electrode surface, which reduces the voltage requirement. However, not all ILs are the same, considering the purity and degree of the functionality of the IL. Further, there are critical experimental factors that impact the evaluation of ILs for ECO 2 R including the reference electrode, working electrode construction, cosolvent selection, cell geometry, and whether the electrochemical cell is a single compartment or a divided cell. Here, we describe improved synthesis methods of imidazolium cyanopyrrolide IL for electrochemical studies in consideration of precursor composition and reaction time. We explored how IL with cosolvents (i.e. acetonitrile, dimethylformamide, dimethyl sulfoxide, propylene carbonate, and n-methyl-2-pyrrolidone) affects conductivity, CO 2 mass transport, and ECO 2 R activation overpotential together with the effects of electrode materials (Sn, Ag, Au, and glassy carbon). Acetonitrile was found to be the best solvent for lowering the onset potential and increasing the catalytic current density for the production of CO owing to the enhanced ion mobility in combination with the silver electrode. Further, the ECO 2 R activity of molecular catalysts Ni(cyclam)Cl 2 and iron tetraphenylsulfonato porphyrin (FeTPPS) on the carbon cloth electrode maintained high Faradaic efficiencies for CO in the presence of the IL. This study presents best practices for examining nontraditional multifunctional electrolytes amenable to integrated CO 2 capture and conversion technologies for homogeneous and heterogeneous ECO 2 R.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields

Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interfacial Response and Structural Adaptation of Structured Polyelectrolyte Thin Films

Ionizable block copolymers with distinctive block characteristics display the diversity crucial for the design of macromolecules for targeted applications. In contrast to van der Waals copolymers, their interfaces, which are critical to their function, consist of nanodomains, each of a different nature and thus unique interfacial behavior. Here, the interfacial response of a symmetric block copolymer with a sulfonated polystyrene polyelectrolyte center, tethered to polyethylene-r-propylene and terminated by poly(t-butyl styrene) is probed as polymer films are exposed to three polar solvents, water, propanol, and tetrahydrofuran (THF), using molecular dynamics simulations. Each of the solvents captures a distinctive interaction with the individual blocks. We find that at the film boundary, the interfacial response is initially dominated by that of the hydrophobic blocks to all solvents. At later times, the solvent distribution among the blocks, where water molecules associate predominantly with the sulfonated groups and propanol and THF reside at multiple different sites, determines the chemical composition and the polymer conformation at the interface. Altogether, these simulations provide the first direct molecular insight into the interfacial response of ionizable copolymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dependence of Linker Length and Composition on Ionic Conductivity and Lithium Deposition in Single-Ion Conducting Network Polymers

In this report, single-ion conducting electrolytes stand as promising alternatives to state-of-the-Art electrolytes in lithium batteries, although a single-ion conducting material with high Li + conductivity, stability in contact with lithium, and suitable mechanical properties has been slow to emerge. Here, we describe the synthesis of a series of single-ion conducting network polymers from the reaction of tetrakis(4-(chloromethyl)-2,3,5,6-Tetrafluorophenyl)borate with oligoethylene glycoxide linkers Li 2 O[(CH 2 CH 2 )O] n (n = 1, 2, 3, 9, and 22). Polymers with the longest linkers (n = 9 and 22; ANP-9 and ANP-10, respectively) form materials with conductivities of ~ 10 -6 S cm -1 at 100 °C. With the addition of 65 wt % propylene carbonate (PC), all the network polymers in the series exhibit high conductivities at ambient temperatures, with the n = 1 material (ANP-6) achieving a bulk ionic conductivity of 2.5 x 10 -4 S cm -1 at 25 °C. More conductive single-ion conducting gels could be prepared by using the less coordinating pentanediol dilithium salt as a linker (ANP-11; σ = 3.5 x 10 -4 S cm -1 at 25 °C), although this material exhibited a surprisingly high interfacial resistance in contact with a lithium electrode. In contrast, the gel formed with ANP-6 is notably stable in contact with metallic lithium electrodes, displays a lithium-ion transference number of unity, and boasts a wide electrochemical stability window of greater than 4.5 V. Temperature-dependent ac impedance analysis reveals that the ionic conductivity of this material-and likely the other gels in the series-matches closely to a Vogel-Tamman-Fulcher temperature model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Subdiffusive High-Pressure Hydrogen Gas Dynamics in Elastomers

We report elastomeric rubber materials serve a vital role as sealing materials in the hydrogen storage and transport infrastructure. With applications including O-rings and hose liners, these components are exposed to pressurized hydrogen at a range of temperatures, cycling rates, and pressure extremes. High-pressure exposure and subsequent rapid decompression often lead to cavitation and stress-induced damage of the elastomer due to localization of the hydrogen gas. Here, we use all-atom classical molecular dynamics simulations to assess the impact of compositional variations on gas diffusion within the commonly used elastomer ethylene–propylene–diene monomer (EPDM). With the aim to build a predictive understanding of precursors to cavitation and to motivate material formulations that are less sensitive to hydrogen-induced failure, we perform systematic simulations of gas dynamics in EPDM as a function of temperature, gas concentration, and cross-link density. Our simulations reveal anomalous, subdiffusive hydrogen motion at pressure and intermediate times. We identify two groups of gas with different mobilities: one group exhibiting high mobility and one group exhibiting low mobility due to their motion being impeded by the polymer. With decreasing temperatures, the low-mobility group shows increased gas localization, the necessary precursor for cavitation damage in these materials. At lower temperatures, increasing cross-link density led to greater hydrogen gas mobility and a lower fraction of caged hydrogen, indicating that increasing cross-link density may reduce precursors to cavitation. Finally, we use a two-state kinetic model to determine the energetics associated with transitions between these two mobility states.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unraveling Ion Transport in Trifluoromethanesulfonimide Pentablock Copolymer Membranes in Nonaqueous Electrolytes

Cation exchange membranes provide a key function in various nonaqueous energy storage technologies. As such, understanding the role of a nonaqueous liquid electrolyte on ion transport through a membrane is imperative. This study unravels relationships between membrane ion transport and electrolyte salt concentration utilizing a trifluoromethanesulfonimide-based pentablock copolymer membrane with polar and nonpolar nonaqueous electrolyte solutions. Here, the membrane plasticized with propylene carbonate (PC) exhibits a single-ion conductivity of 9.3 × 10 –6 S/cm at 25 °C. Tailoring the nonaqueous electrolyte and electrolyte salt concentration enables the single-ion conducting membrane to maintain a high cation transport number, >0.75, and boost ion conductivity more than 10 times to 1.3 × 10 –4 S/cm at 25 °C for the PC-based electrolyte solution. The findings provide critically important design parameters for energy storage systems utilizing nonaqueous electrolytes, such as Li- and Na-ion batteries and nonaqueous flow battery technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗