Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “producible well”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Novel method for the identification of the production flavor of neutral charmed mesons

We propose a new algorithm for the identification of the production flavor of neutral D mesons in the Belle II experiment. The algorithm exploits the correlation between the flavor of a reconstructed neutral D meson (signal D meson) and the electric charges of particles reconstructed in the rest of the e + e – →$c\bar{c}$ event. These include those originating from the decay of the other charm hadron produced in the event, as well as those possibly produced in association with the signal D meson. We develop the algorithm using simulation and calibrate it in data using decay modes that identify the flavor of the decaying neutral D meson. We use a data sample of e + e – collisions, corresponding to 362 fb –1 of integrated luminosity, collected by Belle II at center-of-mass energies near the Υ(4S) mass. The effective tagging efficiency in data is (47.91±0.07 (stat) ±0.51 (syst)) %, independent of the neutral-D-meson decay mode. This charm flavor tagger will approximately double the effective sample size of many CP-violation and charm-mixing measurements that so far have exclusively relied on neutral D mesons originating from D* ± decays. While developed for Belle II, the basic principles underlying the charm flavor tagger can be used in other experiments, including those at hadron colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1994

Implementation of a vibrationally linked chemical reaction model for DSMC

A new procedure closely linking dissociation and exchange reactions in air to the vibrational levels of the diatomic molecules has been implemented in both one- and two-dimensional versions of Direct Simulation Monte Carlo (DSMC) programs. The previous modeling of chemical reactions with DSMC was based on the continuum reaction rates for the various possible reactions. The new method is more closely related to the actual physics of dissociation and is more appropriate to the particle nature of DSMC. Two cases are presented: the relaxation to equilibrium of undissociated air initially at 10,000 K, and the axisymmetric calculation of shuttle forebody heating during reentry at 92.35 km and 7500 m/s. Although reaction rates are not used in determining the dissociations or exchange reactions, the new method produces rates which agree astonishingly well with the published rates derived from experiment. The results for gas properties and surface properties also agree well with the results produced by earlier DSMC models, equilibrium air calculations, and experiment.

Carlson, A. B.↗
DOE OSTI2022

Corrosivity Screening of Pyrolysis Bio-Oils by Short-Term Alloy Exposures. Laboratory Analytical Procedure (LAP), Issue Date: May 12, 2022

Bio-oils contain organic acids and oxygenated compounds that can lead to corrosion issues during bio-oil processing and storage. This Laboratory Analytical Procedure (LAP) allows for rapid screening of a bio-oil's corrosivity without the need for complex equipment and long-term exposures. A robust and repeatable method for assessing the corrosivity of bio-oils is necessary in order to remove materials degradation as an obstacle to research, upgrading, use and storage of bio-oils. This LAP involves the incubation of a representative alloy, 410 stainless steel (410 SS), specimen in bio-oil over a period of 48 hours at 50 degrees C in a sealed container. The corrosive species in the bio-oil react with and deplete alloy elements such as iron (Fe) and/or chromium (Cr) from the specimen into the bio-oil solution. The depletion of Fe and Cr from the specimen results in a significant mass loss that can be recorded. The mass loss is directly correlated to the corrosivity of a bio-oil. Examples of bio-oils in scope include the ones produced by fast pyrolysis and catalytic fast pyrolysis, as well as liquids produced from hydrothermal liquefaction.

09 BIOMASS FUELS↗
DOE OSTI2021

A machine-learning inverse model framework for rapid forecasting and history matching in unconventional reservoirs

Model-based optimization for real-time forecasting in unconventional reser-voirs requires novel methods and work?ows since the strategies and work?ows used in conventional reservoirs are either inapplicable, or prohibitively expen-sive and time-consuming. Insu?cient site data and computational expense of high-?delity simulations mean that work?ows with high-?delity simulations are not ideal for usage in comprehensive uncertainty quanti?cation stud-ies that require 1000s of forward model runs. We present an alternative, novel work?ow for unconventional reservoirs, based on the interplay between reduced-order models and machine-learning. Our physics-informed machine-learning (PIML) work?ow addresses the challenges to real-time reservoir management in uncoventionals, namely lack of data (the time-frame for which the wells have been producing), and computational expense of high-?delity modeling. We use the machine-learning paradigm of transfer-learning to bind together fast but less accurate reduced-order models with slow, but accurate high-?delity models and circumvent the di?culties inherent in the current state-of-the-art for unconventionals. Such a PIML work?ow, grounded in physics, is a viable candidate for real-time history matching and production forecasting in a fractured shale gas reservoir. The signi?cance of our approach is that while it is developed for a particu-lar well and site in the Marcelus Shale gas reservoir of the Appalachian basin (MSEEL), it is not wedded to it. We expect the same work?ow can be ap-plied to other shale formations (e.g., Woodford, Barnett, Utica, EagleFord) should site-data become available, using the same set of machine-learning techniques from transfer learning. Some ?ne-tuning (or minimal retraining of the neural networks) will be required to transfer knowledge across shale gas sites/formations but it is a clearly superior alternative to developing a new machine-learning model altogether when considering a di?erent site.

Srinivasan, Shriram↗
NASA NTRS1980

On the constancy of solar particle fluxes from track, thermoluminescence and solar wind measurements in lunar rocks

Evidence contained within lunar rocks concerning possible variations in solar activity over the last 1 to 2 million years is reviewed. The effects of solar wind particles, which are implanted at shallow depths, solar flare protons, which produce thermoluminescence as well as stable and radionuclides, and solar flare heavy nuclei, which produce tracks, are considered, and the quality and limitations of nuclear tracks measurements as indicators of solar flare flux histories are discussed. Methods used for the determination of the solar flare track production rate, which must be known in order to measure lunar rock surface exposure times, are compared, and it is concluded that most of the evidence favors the rate obtained by Blanford et al. (1975). Information on the constancy of the solar flare particle flux obtained by comparison of the effects of different surface phenomena with solar particle effects is then illustrated for the cases of comparisons between solar flare tracks and microcrater densities, solar flare particle fluxes measured over different periods, and comparisons of the solar flare track production rate with the solar wind flux and microcratering rate. It is noted that these studies provide no evidence for a change in solar particle flux by more than a factor of two over the last 10,000 to 1 million years, or for a change in the solar flare Fe/H ratio in the last 2 million years.

Zinner, E.↗
DOE OSTI2023

CRISPR/Cas9 mutants delineate roles of Populus FT and TFL1/CEN/BFT family members in growth, dormancy release and flowering

Abstract Vegetative and reproductive phase change and phenology are economically and ecologically important traits. Trees typically require several years of growth before flowering and, once mature, seasonal control of the transition to flowering and flower development is necessary to maintain vegetative meristems and for reproductive success. Members of two related gene subfamilies, FLOWERING LOCUST (FT) and TERMINAL FLOWER1 (TFL1)/CENTRORADIALIS (CEN)/BROTHER OF FT AND TFL1 (BFT), have antagonistic roles in flowering in diverse species and roles in vegetative phenology in trees, but many details of their functions in trees have yet to be resolved. Here, we used CRISPR/Cas9 to generate single and double mutants involving the five Populus FT and TFL1/CEN/BFT genes. The ft1 mutants exhibited wild-type-like phenotypes in long days and short days, but after chilling, to release dormancy, they showed delayed bud flush and GA3 could compensate for the ft1 mutation. After rooting and generating some phytomers in tissue culture, both cen1 and cen1ft1 mutants produced terminal as well as axillary flowers, indicating that the cen1 flowering phenotype is independent of FT1. The CEN1 showed distinct circannual expression patterns in vegetative and reproductive tissues and comparison with the expression patterns of FT1 and FT2 suggests that the relative levels of CEN1 compared with FT1 and FT2 regulate multiple phases of vegetative and reproductive seasonal development.

Forestry↗
DOE OSTI2025

The Henkin-McGill critical temperature test for explosives revisited: An overview of historical and modern method development

Many overarching standards, regulations, or other requirements necessitate that the critical temperature (T crit ) of an energetic material be known or estimate prior to operations such as heating. However, they rarely, if ever, provide a specific method for doing so. While other methods exist to calculate T crit , such as the Frank-Kamenetskii equation, computer simulation, etc., these cannot be readily utilized for energetics that are physical mixtures (i.e. most pyrotechnics) or materials where detailed material properties required for such calculations are lacking. Here, in this study, a COTS (commercial off-the-shelf) SBAT (Simulated Bulk Auto-ignition Test) apparatus is modified to perform Henkin cookoff tests. This creates a simple, efficient, and cost-effective solution to estimate required T crit values for energetic materials. After a historical overview of the evolution of the Henkin test, several common energetic materials (PETN, RDX, etc.) for which T crit has been readily calculated, and historical data is available, were analyzed for comparison and verification purposes. This was followed by a variety of pyrotechnic mixtures and other materials to where calculation methods cannot be readily used. The modified apparatus, as well as an updated sample shell sealing method, produced results that aligned well with historical data. It also produced reasonable T crit estimates for those materials where the Frank-Kamenetskii equation cannot be applied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Gasification of Coal and Biomass: The Route to Net-Negative-Carbon Power and Hydrogen

One promising process that is a candidate for meeting the goals of the US Department of Energy’s 21st Century Power Plant initiative is to gasify a mixture of coal and biomass to yield a syngas, which can have CO2 removed and then be used to produce hydrogen as well as an off-gas that can be used to flexibly produce power. This concept would overall be carbon net-negative and readily meet the 21st Century Power Plant initiative targets of smaller scale MW generation, high ramp rates and turndown, feedstock flexibility, and high efficiency—at a reasonable cost. Moreover, adding the large-scale production of “ultra-green” hydrogen yields a system tailored for the coming hydrogen economy, providing long-term energy storage and an attractive co-product for sale. The objective of the work being led by the Electric Power Research Institute, Inc. (EPRI), with support by Bechtel Corporation (Bechtel), Gas Technology Institute (GTI), Hamilton Mauer International, Inc. (HMI), Nebraska Public Power District (NPPD), NexantECA, Inc. (Nexant), and Wärtsilä, is to perform a front-end design and engineering (FEED) study on an oxygen-blown gasification system coupled with water-gas shift, pre-combustion CO2 capture, and pressure-swing adsorption working off a coal/biomass mix to yield high-purity hydrogen and a fuel off-gas that can generate power. Several designs are being considered that will be capable of producing 50 MW net from a flexible generator, over 8500 kg/hr of hydrogen, and net-negative CO2 emissions, at an efficiency of 50% net HHV. The plant would be hosted at an NPPD site, where opportunities for enhanced oil recovery and sequestration have been investigated and the need for low-carbon power and hydrogen is imminent. The principal biomass to be used is corn stover—prevalent in Nebraska where the plant will be located—mixed with Powder River Basin (PRB) coal, necessitating a gasifier that can use this feedstock and be flexible to allow other types. Waste plastics will also be reviewed for use. Two oxygen-blown gasifiers have been identified as candidates that have done testing with biomass including corn stover: the GTI gasifier—a high-pressure, fluidized-bed type—and HMI’s, a lower pressure moving-bed type. Both have relative advantages that are being investigated in the Phase I design study, with a resultant down select of one system for which the FEED will be performed in Phase II. The technical tasks for the proposed project are: • Design Development: Completion of design activities necessary to provide inputs for the FEED study. Multiple design cases will be assessed with the selection of the optimal one for the FEED. • Investment Case Preparation: Development of the draft investment case for the proposed process with business cases performed for the proposed host site and two other locations. • Host Site Selection: Evaluation of the two potential host sites within NPPD’s portfolio to select the preferred candidate based on technical, economic, and environmental considerations. • Environmental Information Volume (EIV) Development: Completion of the EIV for the host site. • FEED Study: Completion of a FEED study based on the design selected in Phase I. A Greenhouse Gas Life Cycle Analysis will also be performed for the process. • Update Investment Case: Finalization of the investment case based on findings from the FEED. The advantages of the proposed project are significant. Having an engaged U.S. power utility willing to provide a host site that will produce energy from coal plus a deep and experienced team is critical; the process meets all the goals of DOE’s 21st Century Power Plant initiative at an estimated total plant cost of ~$880M and a production cost of hydrogen of ~$2/kg-H2 while producing net-negative carbon power. If developed, this process has real commercial potential in the United States—supported by EPRI’s initial review of the considerable interest from selected U.S. utilities—and elsewhere around the globe. The process has fewer environmental hurdles compared to other concepts, lowering regulatory and protest risks—providing a pathway to preserving the viability of a critical indigenous energy source by transforming its use to match a changing world. This presentation will outline the motivation for the effort, summarize project plans, work completed to date, results of the Design Development task, and detailed work scope for the remainder of the project.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Gasification of Coal and Biomass: The Route to Net-Negative-Carbon Power and Hydrogen

One promising process that is a candidate for meeting the goals of the US Department of Energy’s 21st Century Power Plant initiative is to gasify a mixture of coal and biomass to yield a syngas, which can have CO2 removed and then be used to produce hydrogen as well as an off-gas that can be used to flexibly produce power. This concept would overall be carbon net-negative and readily meet the 21st Century Power Plant initiative targets of smaller scale MW generation, high ramp rates and turndown, feedstock flexibility, and high efficiency—at a reasonable cost. Moreover, adding the large-scale production of “ultra-green” hydrogen yields a system tailored for the coming hydrogen economy, providing long-term energy storage and an attractive co-product for sale. The objective of the work being led by the Electric Power Research Institute, Inc. (EPRI), with support by Bechtel Corporation (Bechtel), Gas Technology Institute (GTI), Hamilton Mauer International, Inc. (HMI), Nebraska Public Power District (NPPD), NexantECA, Inc. (Nexant), and Wärtsilä, is to perform a front-end design and engineering (FEED) study on an oxygen-blown gasification system coupled with water-gas shift, pre-combustion CO2 capture, and pressure-swing adsorption working off a coal/biomass mix to yield high-purity hydrogen and a fuel off-gas that can generate power. Several designs are being considered that will be capable of producing 50 MW net from a flexible generator, over 8500 kg/hr of hydrogen, and net-negative CO2 emissions, at an efficiency of 50% net HHV. The plant would be hosted at an NPPD site, where opportunities for enhanced oil recovery and sequestration have been investigated and the need for low-carbon power and hydrogen is imminent. The principal biomass to be used is corn stover—prevalent in Nebraska where the plant will be located—mixed with Powder River Basin (PRB) coal, necessitating a gasifier that can use this feedstock and be flexible to allow other types. Waste plastics will also be reviewed for use. Two oxygen-blown gasifiers have been identified as candidates that have done testing with biomass including corn stover: the GTI gasifier—a high-pressure, fluidized-bed type—and HMI’s, a lower pressure moving-bed type. Both have relative advantages that were investigated in the Phase I design study, with a resultant down select of one system for which the FEED will be performed in Phase II. The technical tasks for the project are: • Design Development: Completion of design activities necessary to provide inputs for the FEED study. Multiple design cases will be assessed with the selection of the optimal one for the FEED. • Investment Case Preparation: Development of the draft investment case for the proposed process with business cases performed for the proposed host site and two other locations. • Host Site Selection: Evaluation of the two potential host sites within NPPD’s portfolio to select the preferred candidate based on technical, economic, and environmental considerations. • Environmental Information Volume (EIV) Development: Completion of the EIV for the host site. • FEED Study: Completion of a FEED study based on the design selected in Phase I. A Greenhouse Gas Life Cycle Analysis will also be performed for the process. • Update Investment Case: Finalization of the investment case based on findings from the FEED. The advantages of the proposed project are significant. Having an engaged U.S. power utility willing to provide a host site that will produce energy from coal plus a deep and experienced team is critical; the process meets all the goals of DOE’s 21st Century Power Plant initiative at an estimated total plant cost of ~$880M and a production cost of hydrogen of ~$2/kg-H2 while producing net-negative carbon power. If developed, this process has real commercial potential in the United States—supported by EPRI’s initial review of the considerable interest from selected U.S. utilities—and elsewhere around the globe. The process has fewer environmental hurdles compared to other concepts, lowering regulatory and protest risks—providing a pathway to preserving the viability of a critical indigenous energy source by transforming its use to match a changing world. This presentation outlines the motivation for the effort, summarizes project plans, work completed to date, results of the Phase I effort and, and detailed work scope for the remainder of the project in the Phase II FEED effort.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Crop Modeling Application to Improve Irrigation Efficiency in Year-Round Vegetable Production in the Texas Winter Garden Region

Given a rising demand for quality assurance, rather than solely yield, supplemental irrigation plays an important role to ensure the viability and profitability of vegetable crops from unpredictable changes in weather. However, under drought conditions, agricultural irrigation is often given low priority for water allocation. This reduced water availability for agriculture calls for techniques with greater irrigation efficiency, that do not compromise crop quality and yield, and that provide economic benefit for producers. This study developed vegetable growing models for eight different vegetable crops (bush bean, green bean, cabbage, peppermint, spearmint, yellow straight neck squash, zucchini, and bell pepper) based on data from several years of field research. The ALMANAC model accurately simulated yields and water use efficiency (WUE) of all eight vegetables. The developed vegetable models were used to evaluate the effects of various irrigation regimes on vegetable growth and production in several locations in the Winter Garden Region of Texas, under variable weather conditions. Based on our simulation results from 960 scenarios, optimal irrigation amounts that produce high yield as well as reasonable economic profit to producers were determined for each vegetable crop. Overall, yields for all vegetables increased as irrigation amounts increased. However, irrigation amounts did not have a sustainable impact on vegetable yield at high irrigation treatments, and the WUEs of most vegetables were not significantly different among various irrigation regimes. When vegetable yields were compared with water cost, the rate decreased as irrigation amounts increased. Thus, producers will not receive economic benefits when vegetable irrigation water demand is too high.

Kim, Sumin↗
NASA NTRS2000

Balloon-Borne Observations of the Anisotropy of the Cosmic Microwave'Background on Angular Scales of 0.2 to 40 Degrees'

During this final period, BOOMERANG was deployed to McMurdo Mtn., Antarctica in late 1998 and successfully flew a 10.5 day long duration flight. The experiment returned excellent data, and produced the first resolved images of the early universe. These results, as well as those produced during a test flight over North America in August, 1997, are given in the references below. Analysis of the data from the 1998 flight is continuing. In parallel, we have begun to prepare the payload for a long-duration flight from McMurdo in December 2001. For this flight, the focal plane is being outfitted with polarization sensitive detectors, with the goal of detecting the polarization of the CMB that is predicted to exist at degree angular scales.

Source record↗
DOE OSTI2025

Effect of grafting density on the two-dimensional assembly of nanoparticles

Employing grazing-incidence small-angle X-ray scattering (GISAXS) and X-ray reflectivity (XRR), we demonstrate that films composed of polyethylene glycol (PEG)-grafted silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), as well as their binary mixtures, form highly stable hexagonal structures at the vapor–liquid interface. These nanoparticles exhibit remarkable stability under varying environmental conditions, including changes in pH, mixing concentration, and PEG chain length. Short-chain PEG grafting produces dense, well-ordered films, while longer chains produce more complex, less dense quasi-bilayer structures. AuNPs exhibit higher grafting densities than AgNPs, leading to more ordered in-plane arrangements. In binary mixtures, AuNPs dominate the population at the surface, while AgNPs integrate into the system, expanding the lattice without forming a distinct binary superstructure. In conclusion, these results offer valuable insights into the structural behavior of PEG-grafted nanoparticles and provide a foundation for optimizing binary nanoparticle assemblies for advanced nanotechnology applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Evaluation of the economic implications of varied pressure drawdown strategies generated using a real-time, rapid predictive, multi-fidelity model for unconventional oil and gas wells

Experience has suggested that pressure maintenance in hydraulically fractured reservoirs via lower, more sustained production drawdowns may offer improved cumulative recovery and overall resource extraction efficiency compared to more rapid drawdown approaches aimed at generating high initial production. However, given the inherent variability of oil and natural gas markets, operators pursue production strategies that maximize profitability over resource extraction efficiency. This study focuses on evaluating the implications of contrasting pressure drawdown strategies on the long-term production and resulting economics for a real, producing unconventional gas well in the Marcellus Shale of the Appalachian Basin using a techno-economic analysis approach. Our research combines elements of well-specific horizontal well design, production forecasting, equipment sizing and capital cost estimation, operating cost estimation, and revenue and tax calculations. Gas production forecast outlook scenarios were generated under varying pressure drawdowns using two approaches: 1) a novel physics-informed machine learning workflow and 2) traditional reservoir simulation. A discounted cash flow model was used to evaluate the resulting economic implications for each drawdown scenario—generating output for exploring the coupled effect of factors like the timing and volume of gas production, prevailing economic and market conditions for natural gas, and overall estimated ultimate recovery on profitability metrics such as internal rate of return and net present value. Results show that there is potential to maximize the cumulative gas produced in the specific case study well by employing a lower pressure drawdown. Conversely, the greatest profitability is achieved using rapid drawdown as signified by a small, specific subset of our outlook scenarios. On an averaging basis, we find that the combinations of highest cumulative producing and most profitable scenarios occur under lower drawdowns with long (>40 years) producing timeframes, but require higher relative gas price and lower discounting considerations. Further, the machine learning predictive outlooking capability proved effective for enabling rapid generation of a multitude of scenario forecasts. As a result, a variety of prominent example cases could be generated to strike the balance of greater productivity and economic return given their associated producing features and economic conditions when compared to similar producing scenarios—critical insight that offers improved decision support for unconventional oil and gas operations.

42 ENGINEERING↗
NASA NTRS2002

An Overview of the Earth Observing System MODIS Instrument Performance, Data Systems Performance, and Data Products Status and Availability

The Moderate Resolution Imaging Spectroradiometer (MODIS) on the Earth Observing System (EOS) Terra Mission began to produce data in February 2000. Now, approximately 2 years from that time, the instrument is operating well. All subsystems of the instrument are performing as expected, the signal-to-noise (S/N) performance meets or exceeds specifications, band-to-band registration meets specifications, geodetic registration of observations is nearing 50 meters (one sigma) and the spectral bands are located where they were intended to be pre-launch and attendant gains and offsets are stable to date. The data systems have performed well and are producing a wide variety of data products useful for scientific and applications studies in relatively consistent fashion extending from November 2000 to the present. Within the approximately 40 MODIS data products, several are new and represent powerful and exciting capabilities. The remainder of the MODIS products exceed or, at a minimum, match the capabilities of products from heritage sensors such as, for example, the Advanced Very High Resolution Radiometer (AVHRR). Efforts are underway to provide data sets for the greater Earth science community and to improve access to these products at the various Distributed Active Archive Centers (DAAC's) or through Direct Broadcast (DB) stations. The MODIS instrument on the EOS Aqua mission should also be expected to be in orbit and functioning in the Spring of 2002.

Salomonson, Vincent V.↗
NASA NTRS2002

Study of Air Pollution from Space Using TOMS: Challenges and Promises for Future Missions

A series of TOMS instruments built by NASA has flown on US, Russian, and Japanese satellites in the last 24 years. These instruments are well known for producing spectacular maps of the ozone hole that forms over Antarctica each spring. However, it is less well known that these instruments also provided first evidence that space-based measurements in UV of sufficiently high precision and accuracy can provide valuable information to study global air quality. We will use the TOMS experience to highlight the promises and challenges of future space-based missions designed specifically for air quality studies.

Bhartia, Pawan K.↗
DOE OSTI2022

Active Interrogation of the Snyder Shells using a SEA-7 Betatron

The shielded highly enriched uranium (HEU) problem is one that still needs to be addressed. As a first step towards a solution, the Snyder shells (depleted uranium) were actively interrogated with a SEA-7 betatron in various configurations using an MC15 as a detector. These configurations include masses from 0.55 to 5.1 kg, as well as 5.1 kg in a steel container. A strong electromagnetic field (EMF) background was identified in previous work, but the results in this work show all configurations produce a signal well above the background. An initial simulation capability was developed that produces the expected flux profile from the SEA-7 betatron, but further work needs to be done to determine the magnitude of the flux via a combination of experiment and simulation validation. Depleted uranium generally produces more neutrons than HEU, so additional future work will need to include similar measurements of HEU to confirm similar performance of the technique. Additionally the EMF background needs to be better characterized as a function of distance and angle from the SEA-7 source and mitigation techniques explored.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1986

Degradation mechanisms in thermal barrier coatings

The degradation mechanism in thermal barrier coating systems subjected to prolonged heating in air as well as to thermal cycling was studied. Bond coat oxidation was found to be the most important reason for degradation. The oxidation produced NiO as well as Al?O? in one set of samples, but the variation in initial coating structure made it difficult to resolve systematic differences between isothermally heated and thermally cycled samples. However, the contribution to degradation from changes in substrate composition seemed less in the cycled sample.

Shinde, S. L.↗