Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pollution measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A Decade of Change in NO2 and SO2 over the Canadian Oil Sands As Seen from Space

A decade (20052014) of observations from the Ozone Monitoring Instrument (OMI) were used to examine trends in nitrogen dioxide(NO2) and sulfur dioxide (SO2) over a large region of western Canada and the northern United States, with a focus on the Canadian oil sands. In the oil sands, primarily over an area of intensive surface mining, NO2 tropospheric vertical column densities (VCDs) are seen to be increasing by as much as 10year, with the location of the largest trends in a newly developing NO2 lobe well removed from surface monitoring stations. SO2 VCDs in the oil sands have remained approximately constant. The only other significant increase in the region was seen in NO2 over Bakken gas fields in North Dakota which showed increases of up to5yr. By contrast, other locations in the region show substantial declines in both pollutants, providing strong evidence to the efficacy of environmental pollution control measures implemented by both nations. The OMI-derived trends were found to be consistent with those from the Canadian surface monitoring network, although in the case of SO2, it was necessary to apply a correction in order to remove the residual signal from volcanic eruptions present in the OMI data.

NO2↗

Probabilistic Damage Characterization Using the Computationally-Efficient Bayesian Approach

This work presents a computationally-ecient approach for damage determination that quanti es uncertainty in the provided diagnosis. Given strain sensor data that are polluted with measurement errors, Bayesian inference is used to estimate the location, size, and orientation of damage. This approach uses Bayes' Theorem to combine any prior knowledge an analyst may have about the nature of the damage with information provided implicitly by the strain sensor data to form a posterior probability distribution over possible damage states. The unknown damage parameters are then estimated based on samples drawn numerically from this distribution using a Markov Chain Monte Carlo (MCMC) sampling algorithm. Several modi cations are made to the traditional Bayesian inference approach to provide signi cant computational speedup. First, an ecient surrogate model is constructed using sparse grid interpolation to replace a costly nite element model that must otherwise be evaluated for each sample drawn with MCMC. Next, the standard Bayesian posterior distribution is modi ed using a weighted likelihood formulation, which is shown to improve the convergence of the sampling process. Finally, a robust MCMC algorithm, Delayed Rejection Adaptive Metropolis (DRAM), is adopted to sample the probability distribution more eciently. Numerical examples demonstrate that the proposed framework e ectively provides damage estimates with uncertainty quanti cation and can yield orders of magnitude speedup over standard Bayesian approaches.

Warner, James E.↗

Studying the 2019 Australian Bushfires Disaster using NASA Data: A Data-Driven Storytelling Approach

The 2019-2020 Australian fire season was particularly devastating, with millions of acres of land burned and impacts affecting Australian ecology, local populations and air quality, and the atmosphere. Australia saw unprecedented heat waves, with temperatures reaching 120 F (49.1 C) in January across central and eastern Australia. The fires gave rise to a host of atmospheric phenomenon, including smoke transport and lofting generated by storm-induced by fires, known as pyrocumulonimbus, reaching the stratosphere. NASA’s satellites not only tracked the event in real time, but also gathered data to further inform forecasting and response methods in the future. To better assist the public in understanding the lead up, impacts, and aftermath effects of these fires, the Science Outreach Team at NASA Langley Research Center’s Atmospheric Science Data Center (ASDC) Distributed Active Archive Center (DAAC) used Esri’s storymap tool to guide users through understanding relevant phenomenon, contributing factors, the effects this event has had on global atmospheric composition, and the science behind researching the tie between disasters and public health. The storymap uses data from the ASDC-supported NASA missions Measurements Of Pollution In The Troposphere (MOPITT), Cloud-Aerosol and Infrared Pathfinder Satellite Observation (CALIPSO), Clouds and the Earth’s Radiant Energy System (CERES), the Stratospheric Aerosol and Gas Experiment (SAGE III), and Multi-angle Imaging SpectroRadiometer (MISR). By using data-driven storytelling to communicate impacts of a large fire event, we hope to provide an accessible, engaging science outreach tool format.

Sanjana Paul↗

Studying the 2019-2020 Australian Bushfires Using NASA Data

The 2019-2020 season has been one of the worst fire seasons on record. Australia has seen unprecedented heat waves, with temperatures reaching 120 F (49.1 C) in January across central and eastern Australia. NASA's satellites not only tracked the event in real time, using resources such as the Global Actives Fires and Hotspots Dashboard you see below, but also collected large volumes of rich data that scientists and researchers can use to study the event and the regional and global effects of the disaster. In this Esri StoryMap, we will guide you through the factors leading up to the 2019-2020 Australian bushfires disaster, the effect this event has had on air quality and global atmospheric composition, and the science behind researching the tie between disasters and public health. This story map will use data from ASDC-supported NASA missions such as the Measurements Of Pollution In The Troposphere (MOPITT), Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO), Clouds and the Earth’s Radiant Energy System (CERES), Stratospheric Aerosol and Gas Experiment (SAGE III) on the International Space Station (ISS), and Multi-angle Imaging SpectroRadiometer (MISR).

Sanjana Paul↗

Investigating Drivers of Particulate Matter Pollution Over India and the Implications for Radiative Forcing With GEOS-Chem-TOMAS15

Ambient fine particulate matter (PM 2.5 ) concentrations in India frequently exceed 100 μg/m 3 during fall and winter pollution episodes. We use the GEOS-Chem chemical transport model with the TwO-Moment Aerosol Sectional microphysics scheme with 15 size bins (TOMAS15) to assess PM 2.5 composition and impacts on radiation and cloud condensation nuclei (CCN) during pollution episodes as compared to the seasonal (October-December) average. We conduct high resolution (0.25° × 0.3125°) nested-domain simulations over India for short-duration, high-PM2.5 episodes in the fall of 2015 and 2017. The simulations capture the magnitude and spatial patterns of pollution episodes measured by surface monitors (r PM2.5 = 0.69) although aerosol optical depth is underestimated. During the episodes, near-surface organic matter (OM), black carbon (BC), and secondary inorganic aerosol concentrations increase from seasonal averages by up to 36, 7, and 7 μg/m 3 , respectively. Episodic aerosol increases enhance cooling by lowering the top-of-atmosphere clear-sky direct radiative effect (DRE TOA ) during the 2015 episode (−6 W/m 2 ), with a smaller impact during the 2017 episode (−1 W/m 2 ). Differences in DRE TOA reflect larger increases in scattering aerosols in the column during the 2015 episode (+17 mg/m 2 ) than in 2017 (+13 mg/m 2 ), while absorbing aerosol column enhancements are smaller (+3 mg/m2) in both years. Changes in shortwave radiation at the surface (SW sfc ) are spatially similar to DRE TOA and mostly negative during both episodes. CCN enhancements (0.2% supersaturation) during these episodes occur across the western Indo-Gangetic Plain, coincident with higher PM 2.5 concentrations. Changes in DRE TOA , SW sfc , and CCN during high-PM 2.5 episodes may have implications for crops, the hydrologic cycle, and surface temperature.

PM2.5↗

Visible region remote spectroscopy of polluted water

The use of an airborne spectrometer for measuring the amount of pollutants under the surface of a body of water is discussed. Difficulties created by high water absorption, atmospheric absorption, molecular scattering by water, and atmospheric scattering for the range of wavelengths from 0.2 to 20.0 microns are described. It was determined that some form of quantitative measurement of subsurface pollutants is possible using an airborne spectrometer.

White, P. G.↗

The characterization of an air pollution episode using satellite total ozone measurements

A case study is presented which demonstrates that measurements of total ozone from a space-based platform can be used to study a widespread air pollution episode over the southeastern U.S. In particular, the synoptic-scale distribution of surface-level ozone obtained from an independent analysis of ground-based monitoring stations appears to be captured by the synoptic-scale distribution of total ozone, even though about 90 percent of the total ozone is in the stratosphere. Additional analyses of upper air meteorological data, other satellite imagery, and in situ aircraft measurements of ozone likewise support the fact that synoptic-scale variability of tropospheric ozone is primarily responsible for the observed variability in total ozone under certain conditions. The use of the type of analysis discussed in this study may provide an important technique for understanding the global budget of tropospheric ozone.

Fishman, Jack↗

Desert Dust Layers Over Polluted Marine Boundary Layers: ACE-2 Measurements and ACE-Asia Plans

Aerosols in ACE-Asia are expected to have some commonalties with those in ACE-2, along with important differences. Among the commonalities are occurrences of desert dust layers over polluted marine boundary layers. Differences include the nature of the dust (yellowish in the East Asia desert outflow, vs. reddish-brown in the Sahara Outflow measured in ACE-2) and the composition of boundary-layer aerosols (e.g., more absorbing, soot and organic aerosol in-the Asian plume, caused by coal and biomass burning, with limited controls). In this paper we present ACE-2 measurements and analyses as a guide to our plans for ACE-2 Asia. The measurements include: (1) Vertical profiles of aerosol optical depth and extinction (380-1558 nm), and of water vapor column and concentration, from the surface through the elevated desert dust, measured by the 14-channel Ames Airborne Tracking Sunphotometer (AATS-14); (2) Comparisons of airborne and shipborne sunphotometer optical depths to satellite-retrieved values, with and without desert dust; (3) Comparisons between airborne Sunphotometer optical depth and extinction spectra and those derived from coincident airborne in situ measurements of aerosol size distribution, scattering and absorption; (4) Comparisons between size distributions measured in situ and retrieved from sunphotometer optical depth spectra; (5) Comparisons between aerosol single scattering albedo values obtained by several techniques, using various combinations of measurements of backscatter, extinction, size distribution, scattering, absorption, and radiative flux. We show how analyses of these data can be used to address questions important to ACE-Asia, such as: (1) How do dust and other absorbing aerosols affect the accuracy of satellite optical depth retrievals? How important are asphericity effects? (2) How important are supermicron dust and seasalt aerosols to overall aerosol optical depth and radiative forcing? How well are these aerosols sampled by aircraft inlets and instruments? (3) How consistent are suborbital in situ and remote measurements of aerosols, among themselves and with satellite retrievals? What are the main reasons for observed inconsistencies?

Russell, Philip B.↗

Probing planetary pollution from space

The data sets obtained from instruments that have measured carbon monoxide and tropospheric ozone from space are reviewed. These instruments include a gas cell correlation radiometer named MAPS (Measurement of Air Pollution from Satellites), the Total Ozone Mapping Spectrometer, and the Stratospheric Aerosol and Gas Experiment. Particular attention is given to differential absorption lidar technology which can determine the vertical distribution of aerosols and selected trace gases with considerably more resolution than passive remote sensing techniques. The current plans for monitoring pollution from spaceborne platforms are also discussed.

Fishman, Jack↗

Method for detecting pollutants

A method is described for detecting and measuring trace amounts of pollutants of the group consisting of ozone, nitrogen dioxide, and carbon monoxide in a gaseous environment. A sample organic solid material that will undergo a chemical reaction with the test pollutant is exposed to the test environment and thereafter, when heated in the temperature range of 100-200 C., undergoes chemiluminescence that is measured and recorded as a function of concentration of the test pollutant. The chemiluminescence of the solid organic material is specific to the pollutant being tested.

Rogowski, R. S.↗

ASDC Distribution and Services of TEMPO Data

The Tropospheric Emissions: Monitoring of POllution (TEMPO) instrument represents a groundbreaking advancement in remote sensing technology, providing real-time and high-resolution measurements of atmospheric pollutants and air quality monitoring. This presentation will highlight the significance of TEMPO and its data distribution by NASA’s Atmospheric Science Data Center (ASDC) to facilitate the analyses by the research and end user communities. TEMPO's geostationary orbit allows for continuous and high-resolution measurements of key atmospheric pollutants, including nitrogen dioxide (NO 2 ), ozone (O 3 ), and formaldehyde (HCHO). As a result, researchers can investigate the distribution patterns of these pollutants on an hourly basis, providing valuable information for understanding regional and temporal variations in air quality. Furthermore, this presentation will highlight the usability of TEMPO data in complementing ground-based air quality monitoring networks. ASDC distribution services and tools facilitate efficient data handling and analysis to support research and application uses of TEMPO data. As part of NASA’s Earthdata ecosystem, TEMPO will be available through Earthdata Search and Worldview, as well as have variable and spatial subsetting capabilities. This presentation will provide an overview of data access and services available for TEMPO data.

Hazem Mahmoud↗

The EOS-Aura Mission

The EOS-Aura atmospheric chemistry mission is scheduled for launch in June 2004. Aura is the third of the large EOS observatories. The spacecraft carries an international instrument payload that has a planned six year lifetime. The Aura mission will collect data to help answer stratospheric and tropospheric atmospheric chemistry questions. The mission has the following four major objectives: 1) Track the ozone layer to determine if it is recovering as predicted. The four Aura instruments, HIRDLS, OMI, MLS, and TES will measure ozone, key source, radical, reservoir, tracer gases, and aerosols. Aura's unique design allows for major ozone controlling gases to be measured within the same air mass within a few minutes. The OMI instrument will continue the trends fiom NASA's TOMS series. 2) Track tropospheric pollutant sources and measure tropospheric ozone precursors. Major pollution sources include urban, industrial and biomass burning regions. Tropospheric trace gases will be measured, using TES and OMI, at an average spatial resolution of about approximately 15 km with near global coverage. 3) Measure key upper tropospheric atmospheric constituents that influence climate. The Aura instruments will monitor O3, H2O, CO, cirrus ice, and aerosols. EOS-Aura will fly in a sun-synchronous polar orbit about 15 minutes behind Aqua and make near coincident and synergistic measurements with the EOS- Aqua, Cloudsat, OCO, PARASOL and Calipso missions. Aura launched July 15,2004.

Schoeberl, Mark R.↗

The EOS-Aura Mission

The EOS-Aura atmospheric chemistry mission is scheduled for launch in June 2004. Aura is the third of the large EOS observatories. The spacecraft carries an international instrument payload that has a planned six year lifetime. The Aura mission will collect data to help answer stratospheric and tropospheric atmospheric chemistry questions. The mission has the following four major objectives: 1) Track the ozone layer to determine if it is recovering as predicted. The four Aura instruments, HIRDLS, OMI, MLS, and TES will measure ozone, key source, radical, reservoir, tracer gases, and aerosols. Aura's unique design allows for major ozone controlling gases to be measured within the same air mass within a few minutes. The OMI instrument will continue the trends from NASA's TOMS series. 2) Track tropospheric pollutant sources and measure tropospheric ozone precursors. Major pollution sources include urban, industrial and biomass burning regions. Tropospheric trace gases will be measured, using TES and OMI, at an average spatial resolution of about approx. 15 km with near global coverage. 3) Measure key upper tropospheric atmospheric constituents that influence climate. The Aura instruments will monitor O3, H2O, CO, cirrus ice, and aerosols. EOS-Aura will fly in a sun-synchronous polar orbit about 15 minutes behind Aqua and make near coincident and synergistic measurements with the EOS-Aqua, Cloudsat, OCO, PARASOL and Calipso missions. Aura launched July 15,2004.

Schoeberl, Mark R.↗

Satellite measurements of large-scale air pollution - Methods

A technique for deriving large-scale pollution parameters from NIR and visible satellite remote-sensing images obtained over land or water is described and demonstrated on AVHRR images. The method is based on comparison of the upward radiances on clear and hazy days and permits simultaneous determination of aerosol optical thickness with error Delta tau(a) = 0.08-0.15, particle size with error + or - 100-200 nm, and single-scattering albedo with error + or - 0.03 (for albedos near 1), all assuming accurate and stable satellite calibration and stable surface reflectance between the clear and hazy days. In the analysis of AVHRR images of smoke from a forest fire, good agreement was obtained between satellite and ground-based (sun-photometer) measurements of aerosol optical thickness, but the satellite particle sizes were systematically greater than those measured from the ground. The AVHRR single-scattering albedo agreed well with a Landsat albedo for the same smoke.

Kaufman, Yoram J.↗

Fabrication of glass gas cells for the HALOE and MAPS satellite experiments

The Halogen Occultation Experiment (HALOE) and the Measurement of Air Pollution from Satellites (MAPS) experiment are satellite-borne experiments which measure trace constituents in the Earth's atmosphere. The instruments which obtain the data for these experiments are based on the gas filter correlation radiometer measurement technique. In this technique, small samples of the gases of interest are encapsulated in glass cylinders, called gas cells, which act as very selective optical filters. This report describes the techniques employed in the fabrication of the gas cells for the HALOE and MAPS instruments. Details of the method used to fuse the sapphire windows (required for IR transmission) to the glass cell bodies are presented along with detailed descriptions of the jigs and fixtures used during the assembly process. The techniques and equipment used for window inspection and for pairing the HALOE windows are discussed. Cell body materials and the steps involved in preparing the cell bodies for the glass-to-sapphire fusion process are given.

Sullivan, E. M.↗

Differential correction technique for removing common errors in gas filter radiometer measurements

The Measurement of Air Pollution from Satellites (MAPS) gas filter radiometer experiment was designed to measure CO mixing ratios in the earth's atmosphere. MAPS also measures N2O to provide a reference channel for the atmospheric emitting temperature and to detect the presence of clouds. In this paper we formulate equations to correct the radiometric signals based on the spatial and temporal uniformity of the N2O mixing ratio in the atmosphere. Results of an error study demonstrate that these equations reduce the error in inferred CO mixing ratios. Subsequent application of the technique to the MAPS 1984 data set decreases the error in the frequency distribution of mixing ratios and increases the number of usable data points.

Wallio, H. A.↗

Spatial and Temporal Variability of Ground and Satellite Column Measurements of NO2 and O3 over the Atlantic Ocean During the Deposition of Atmospheric Nitrogen to Coastal Ecosystems Experiment

In situ measurements of O3 and nitrogen oxides (NO + NO2=NOx) and remote sensing measurements of total column NO2 and O3 were collected on a ship in the North Atlantic Ocean as part of the Deposition of Atmospheric Nitrogen to Coastal Ecosystems (DANCE) campaign in July August 2014,100 km east of the mid-Atlantic United States. Relatively clean conditions for both surface in situ mixing ratio and total column O3 and NO2 measurements were observed throughout the campaign. Increased surface and column NO2 and O3 amounts were observed when a terrestrial air mass was advected over the study region. Relative to ship-based total column measurements using a Pandora over the entire study, satellite measurements overestimated total column NO2 under these relatively clean atmospheric conditions over offshore waters by an average of 16. Differences are most likely due to proximity, or lack thereof, to surface emissions; spatial averaging due to the field of view of the satellite instrument; and the lack of sensitivity of satellite measurements to the surface concentrations of pollutants. Total column O3 measurements from the shipboard Pandora showed good correlation with the satellite measurements(r 0.96), but satellite measurements were 3 systematically higher than the ship measurements, in agreement with previous studies. Derived values of boundary layer height using the surface in situ and total column measurements of NO2 are much lower than modeled and satellite-retrieved boundary layer heights, which highlight the differences in the vertical distribution between terrestrial and marine environments.

Martins, Douglas K.↗