Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “persistent image”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Patterns and Controls on Island-Wide Aboveground Biomass Accumulation in Second-Growth Forests of Puerto Rico

Understanding the heterogeneity of biomass accumulation in second-growth tropical forests following land use abandonment is important for informing ecosystem carbon models and forest restoration efforts. There is an urgent need for a broad sample of second-growth forests to enhance our knowledge of carbon accumulation in human-dominated landscapes, especially for older forests. Puerto Rico has predominantly second-growth forests, ranging in age from approximately 25 to more than 80 years. We used an island-wide sample of airborne lidar from the NASA Goddard Lidar, Hyperspectral, and Thermal (G-LiHT) Airborne Imager collected on March 2017, forest inventory data, and data on forest age, precipitation, soils, and land use to estimate aboveground biomass stocks in moist and wet, second-growth tropical forests. Biomass accumulation rates in Puerto Rico were lower, on average, than in other Neotropical forests. Median biomass across >16,700 ha of older second-growth forests was 105 Mg ha−1, and sampled biomass rarely surpassed 250 Mg ha−1. Differences in biomass by age were large and persistent across different substrates and land uses, with a plateau in the pattern of island-wide biomass accumulation after about 33 years. A spatial regression model showed that multiple factors were related to biomass accumulation, including time since abandonment, geologic substrate, past land use as coffee or pasture, precipitation, topographic wetness index, and slope. Our findings have important consequences for the total carbon storage and expected climate mitigation benefits of large-scale reforestation efforts, and highlight the value of airborne lidar for quantifying biomass variability in complex tropical landscapes.

Sebastián Martinuzzi↗

Large-scale Coronal Dimming Foreshadowing a Solar Eruption on 2011 October 1

Understanding large-scale solar eruptions requires detailed investigation of the entire system's evolution, including the magnetic environment enveloping the source region and searches for precursor activity prior to event onset. We combine stereoscopic observations from the Solar Dynamics Observatory (SDO) and STEREO-B spacecraft for several hours before a filament ejection, M1.2-class eruptive flare, and coronal mass ejection (CME) originating in NOAA active region (AR) 11305 on 2011 October 1. Two episodes of significant preeruption coronal dimming that occurred well to the southeast of the ejected filament are identified. The CME subsequently took off with a substantial component of velocity toward the dimming, which became very pronounced during eruption. We used SDO/Helioseismic and Magnetic Imager (HMI) data to reconstruct the magnetic environment of the system and found that it contains a null point near the dimming region. AR 11305 had quite complex connections to nearby ARs 11302 and 11306, as well as to other regions of decayed AR flux. The intensifying and spatially expanding precursor dimming was accompanied by southeastward rising motions of loops toward the null point and northeastward and southwestward motions of loops retracting away. These motions and the dimming are consistent with persistent magnetic reconnection occurring at the null point as it moved upward and southeastward, thereby removing a strapping magnetic field high above AR 11305. Eventually, the filament was ejected explosively toward the null point. We conclude that the breakout model for solar eruptions provides a compelling account of this event. Furthermore, we conjecture that preeruption dimmings may be much more frequent than currently recognized.

solar flares↗

Structures on Europa

Four classes of lineation patterns have been identified on Europa in the area covered by high-resolution Voyager 2 images. These include dark, wedge-shaped bands in the west-central part of the area; triple bands associated with diagonally trending, global lineations; gray concentric curvilinear bands in the southeastern part; and ridges near the terminator. The major structures appear to have been formed by tidal forces centered on the axis pointing toward Jupiter, but variations in the detail of the structural patterns may have been caused by internal forces. The older strain patterns tend to be rejuvenated by younger fractures. The most persistent rejuvenated strain patterns are the global diagonal fractures, probably formed by conjugate shear, and the straight and curvilinear fractures that apparently caused an early dichotomy in fracture patterns.

Lucchitta, B. K.↗

Top-down Estimate of Dust Emissions Through Integration of MODIS and MISR Aerosol Retrievals With the Geos-chem Adjoint Model

Predicting the influences of dust on atmospheric composition, climate, and human health requires accurate knowledge of dust emissions, but large uncertainties persist in quantifying mineral sources. This study presents a new method for combined use of satellite-measured radiances and inverse modeling to spatially constrain the amount and location of dust emissions. The technique is illustrated with a case study in May 2008; the dust emissions in Taklimakan and Gobi deserts are spatially optimized using the GEOSChem chemical transport model and its adjoint constrained by aerosol optical depth (AOD) that are derived over the downwind dark-surface region in China from MODIS (Moderate Resolution Imaging Spectroradiometer) reflectance with the aerosol single scattering properties consistent with GEOS-chem. The adjoint inverse modeling yields an overall 51% decrease in prior dust emissions estimated by GEOS-Chem over the Taklimakan-Gobi area, with more significant reductions south of the Gobi Desert. The model simulation with optimized dust emissions shows much better agreement with independent observations from MISR (Multi-angle Imaging SpectroRadiometer) AOD and MODIS Deep Blue AOD over the dust source region and surface PM10 concentrations. The technique of this study can be applied to global multi-sensor remote sensing data for constraining dust emissions at various temporal and spatial scales, and hence improving the quantification of dust effects on climate, air quality, and human health.

MODIS aerosol retrievals↗

Automated Tracking of Shallow Maritime Clouds on Geostationary Imagery to Extract Lifecycle Characteristics

Shallow moist convection is ubiquitous throughout the tropics and represents a key player in boundary layer processes. Satellites have provided many statistics on shallow clouds, such as size, structure, and geographical coverage, from static views of recurring cloud fields. But determining why certain cloud features appear and persist for different periods requires a time-evolving view of their behaviors. Geostationary satellites provide a unique opportunity to follow the time evolution of individual convective features, given their enhanced spatial and temporal sampling. A cloud-tracking tool was developed to identify properties of cloud lifecycle from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP2EX) field campaign of 2019. The mission conducted intensive sampling of shallow cumulus in the West Pacific Ocean, in tandem with Rapid Scan imagery from the Advanced Himawari Imager (AHI) on the Japan Meteorological Agency’s (JMA) Himawari-8 satellite. Shallow cumulus was segmented according to thresholds in 0.5-km visible reflectance and with blurring techniques. Despite being limited to daytime hours, the segmentations yielded the best resolution possible for capturing cloud initiation and decay. The tracking procedure is based on a computer vision package that includes Kalman filters for motion prediction, object overlap search, and the Hungarian (or Kuhn-Munkres) matching algorithm for track designation. AHI radiances available within the tracked cloud boundaries are assembled to form individual spectral histories. The resulting catalog provides thousands of cloud histories for domains measuring only a few degrees in latitude and longitude. We present an overview of the cloud-tracking tool, strategies to identify development stages from cloud tracks, and preliminary results that document cumulus lifecycle properties from satellite. The application of AHI 0.5-km reflectance has both strengths and limitations when attempting to track lifecycles of the smallest resolvable clouds. We show that by aggregating cloud tracks from a few case studies of CAMP2EX, we can discern differences in cloud lifetime and development according to ensembles selected from areas of interest. The results demonstrate an ability to quantify lifetimes and assess rates of change in cloud characteristics that are likely controlled by the surrounding environment and meteorology.

Cloud Tracking↗

Automated Tracking of Shallow Maritime Clouds on Geostationary Imagery to Extract Lifecycle Characteristics

Shallow moist convection is ubiquitous throughout the tropics and represents a key player in boundary layer processes. Satellites have provided valuable insight on shallow clouds, such as size, structure, and geographical coverage, from static views of recurring cloud fields. But determining why certain cloud features appear and persist for different periods requires a time-evolving view of their behaviors. Geostationary satellites provide a unique opportunity to follow the time evolution of individual convective features, given their enhanced spatial and temporal sampling. A cloud-tracking tool was developed to identify properties of cloud lifecycle from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP2EX) field campaign of 2019. The mission conducted intensive sampling of shallow cumulus in the West Pacific Ocean, in tandem with Rapid Scan imagery from the Advanced Himawari Imager (AHI) on the Japan Meteorological Agency’s (JMA) Himawari-8 satellite. Shallow cumulus were segmented according to thresholds in 0.5-km visible reflectance and with blurring techniques. Despite being limited to daytime hours, the segmentations yielded the best resolution available for capturing cloud initiation, growth, and decay. The tracking procedure is based on a computer vision package that includes Kalman filters for motion prediction, object overlap search, and the Hungarian (or Kuhn-Munkres) matching algorithm for track designation. AHI radiances available within the tracked cloud boundaries are assembled to form individual spectral histories. The resulting catalog provides thousands of cloud histories for domains measuring only a few degrees in latitude and longitude. We present an overview of the cloud-tracking tool and its results for cloud fields sampled throughout CAMP2EX by the airborne P-3. Cloud tracks were selected from about 10 flights to form ensembles, specific groups of tracks occurring in a region with airborne sampling. Cloud lifecycle properties, including duration and maximum area, are calculated for all ensemble members, and analyzed for cloud behavior and P-3 coincidences. By following this strategy, we quantitatively assess the degree of airborne sampling for specific cloud classes defined by the lifecycle calculations. We can summarize which cloud classes had more sampling, the stage of development during sampling, and general differences in character (e.g., isolated congestus vs. cold-pool producer).

Cloud Tracking↗

Comparison of hard X-ray spectra obtained by spectrometers on Hinotori and SMM and detection of 'superhot' component

Hard X-ray spectra in solar flares obtained by the broadband spectrometers aboard Hinotori and SMM are compared. Within the uncertainty brought about by assuming the typical energy of the background X-rays, spectra by the Hinotori spectrometer are usually consistent with those by the SMM spectrometer for flares in 1981. On the contrary, flares in 1982 persistently show 20-50-percent higher flux by Hinotori than by SMM. If this discrepancy is entirely attributable to errors in the calibration of energy ranges, the errors would be about 10 percent. Despite such a discrepancy in absolute flux, in the the decay phase of one flare, spectra revealed a hard X-ray component (probably a 'superhot' component) that could be explained neither by emission from a plasma at about 2 x 10 to the 7th K nor by a nonthermal power-law component. Imaging observations during this period show hard X-ray emission nearly cospatial with soft X-ray emission, in contrast with earlier times at which hard and soft X-rays come from different places.

Nitta, Nariaki↗

Application of Advanced Earth Observations and Model Simulations to Improve Air Quality Monitoring in the Hindu-Kush-Himalayan Region

Air pollution is a serious environmental health concern in the Hindu Kush Himalayan (HKH) region of south-central Asia, as rapid industrialization and population growth have led to increased anthropogenic emissions from transportation, residential, industrial, energy, and biomass burning sources. Natural emissions from dust and forest fires are additional sources of air pollutants that can exacerbate air quality in the region. The combination of the complex pollutant mixtures and atmospherically stable weather conditions during the winter monsoon can visibility reductions and hazardous air quality from persistent haze episodes. The Kathmandu Valley is especially vulnerable to extreme haze issues due to the surrounding mountains that restrict air movement and retains pollutants in the atmosphere. This study uses state-of-the-art satellite observations and modeling capabilities in conjunction with ground-based networks to provide a comprehensive data toolkit for advancing air quality monitoring and forecasting decisions in the HKH region. The toolkit includes new generation satellite observations from the TROPOspheric Monitoring Instrument (TROPOMI), Geostationary Environment Monitoring Spectrometer (GEMS), and Advanced Meteorological Imager, which provide high spatiotemporal information on NO2, HCHO, SO2, O3, and aerosol optical depth (AOD). Particulate matter with diameters less than 2.5 micrometers (PM2.5) are derived from the satellite-retrieved AOD using ground-based observations and forecast model data. The satellite observations are also used to initialize and constrain forecast model systems designed for the HKH region. This talk will highlight the performance of the air quality toolkit for enhancing decision-making processes during exceptional air quality events in the region. Note: Presentation includes additional attachment of full presentation with sound and animation (best when viewed as slide show) with runtime of 15 min 32 secs

Aaron Naeger↗

Paleolakes on Mars

Observational evidence such as outflow channels and valley networks suggest that in the past there was flowing water on Mars. The images of fluvial features on Mars logically suggest that there must exist downstream locations in which the water pooled and the sediment load deposited (i.e. lakes). Sediments and morphological features associated with the martian paleolakes are believed to occur in Valles Marineris, and several large basins including Amazonis, Chryse and Elysium planitia. As Mars became progressively colder over geological time, any lakes on its surface would have become seasonally, and eventually perennially ice-covered. We know from polar lakes on Earth that ice-covered lakes can persist even when the mean annual temperature falls below freezing. Thus, the most recent lacustrine sediments on Mars were probably deposited in ice-covered lakes. While life outside of the Earth's atmosphere has yet to be observed, there is a general consensus among exobiologists that the search for extraterrestrial life should be based upon liquid water. The inference that there was liquid water on Mars during an earlier epoch is the primary motivation for considering the possibility of life during this time. It would be of enormous interest from both an exobiological and paleolimnological perspective to discover lakes or the evidence of former lakes on another planet such as Mars. Limnology would then become an interplanetary science.

NASA Center ARC↗

Rootless Cones on Mars: A Consequence of Lava-Ground Ice Interaction

Fields of small cratered cones on Mars are interpreted to have formed by rootless eruptions due to explosive interaction of lava with ground ice contained within the regolith beneath the flow. Melting and vaporization of the ice, and subsequent explosive expansion of the vapour, act to excavate the lava and construct a rootless cone around the explosion site. Similar features are found in Iceland, where flowing lava encountered water-saturated substrates. The martian cones have basal diameters of c. 30-1000 m and are located predominantly in the northern volcanic plains. High-resolution Mars Orbiter Camera images offer significant improvements over Viking data for interpretation of cone origins. A new model of the dynamics of cone formation indicates that very modest amounts of water ice are required to initiate and sustain the explosive interactions that produced the observed features. This is consistent with the likely low availability of water ice in the martian regolith. The scarcity of impact craters on many of the host lava flows indicates very young ages, suggesting that ground ice was present as recently as less than 10 - l00 Ma, and may persist today. Rootless cones therefore act as a spatial and temporal probe of the distribution of ground ice on Mars, which is of key significance in understanding the evolution of the martian climate. The location of water in liquid or solid form is of great importance to future robotic and human exploration strategies, and to the search for extraterrestrial life.

Fagents, S. A.↗

Ground-Based Vision Tracker for Advanced Air Mobility and Urban Air Mobility

Advanced Air Mobility (AAM) Air Mobility and Urban Air Mobility (UAM) require aircraft surveillance and monitoring for safety and security. Persistent tracking of flying objects provides Air Traffic Control (ATC) and Air Traffic Management (ATM) continuous coverage and knowledge of the national airspace (NAS). Since there are numerous more AAM and UAM aircraft than commercial aircraft, it will be challenging to utilize the same ATC/ATM architectures. A first step in creating a similar ATC/ATM architecture for AAM/UAM will require ground-based and airborne-based sensors to provide monitoring, which will be difficult in urban environments due to GPS degradation. This paper proposes a vision-based tracking method with static cameras by utilizing image subtraction and blob detection, which avoids adding additional electromagnetic interferences in the environment with sensors such as radar. The ground-based vision tracker (GBVT) outputs the detected objects' azimuth and elevation angles from unmanned aerial system (UAS) flight tests. Future and ongoing work includes sending the detected objects' azimuth and elevation angles as inputs for an extended Kalman filter (EKF) to estimate the position and velocity of the detected object.

distributed sensing↗

Automated Tracking of Shallow Cu Growth Rates on Geostationary Imagery and Linkages to Cloud Organization

Shallow moist convection is ubiquitous throughout the tropics and represents a key player in boundary layer processes. Common tropical cloud features, such as convective rolls and cold pool fronts, form and persist for different periods within environments that support such development. Determining differences in lifecycle amongst these features in varying environments requires viewing their evolution from initiation to decay. Geostationary satellites provide a means to follow the clouds with enhanced spatiotemporal sampling from space. We apply a cloud-tracking tool to study lifecycle properties of shallow cumulus sampled during the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP2Ex) field campaign of 2019. The mission conducted airborne and shipborne operations over the West Pacific Ocean, in tandem with Rapid Scan imagery from the Advanced Himawari Imager (AHI) on the Japan Meteorological Agency’s (JMA) Himawari-8 satellite. Shallow cumulus was segmented on AHI 0.5-km visible reflectance and tracked during the daylit hours of several research flights that exhibited ideal atmospheric conditions for tracking. The resulting cloud tracks were collected according to regions containing airborne sampling of individual clouds at various stages of their lifecycles, yielding ensembles of tracks in separate environments. We present an analysis on lifecycle properties extracted from the cloud-track ensembles and their potential connections to cloud organizations observed throughout CAMP2Ex. Each ensemble is evaluated by calculating cloud-layer growth rates and comparing to spatial parameters, including track-achieved area and cloud-top height. The apparent clustering of growth rates for specific ensembles is then compared against overall cloud organizations, such as isolated congestus and cold pool fronts, that are observed with the airborne data. Finally, we consider how such differences in cloud growth appear in the airborne radar observations of intercepted cloud tracks.

Cloud Tracking↗

Venus - Atmospheric motion and structure from Mariner 10 pictures

The Mariner 10 television cameras imaged the planet Venus in the visible and near ultraviolet for a period of 8 days at resolutions ranging from 100 meters to 130 kilometers. The general pattern of the atmospheric circulation in the upper tropospheric/lower stratospheric region is displayed in the pictures. Atmospheric flow is symmetrical between north and south hemispheres. The equatorial motions are zonal (east-west) at approximately 100 meters per second, consistent with the previously inferred 4-day retrograde rotation. Angular velocity increases with latitude. The subsolar region, and the region downwind from it, show evidence of large-scale convection that persists in spite of the main zonal motion. Dynamical interaction between the zonal motion and the relatively stationary region of convection is evidenced by bowlike waves.

Murray, B. C.↗

Remote sensing evidence for regolith water vapor sources on Mars

McCord et al. (1977) have presented earth-based photometric imaging data of an event associated with the 1973 dust storm on Mars. The initial dust cloud in Solis Lacus and two regions to the north and south appeared anomalously bright at blue wavelengths. Water frosts, hazes, and/or clouds were identified, and it was suggested that the water responsible for these findings may have originated from Solis Lacus. More recently, a more intensive review of the observational record of Mars was undertaken. Earth-based telescope observations and data from the Mariner and Viking missions have revealed that Solis Lacus has been a center of repeated activity. Persistent activity in the vicinity of Noachis-Hellespontus and in the border regions of Syrtis Major was also discovered. A review of the observations is provided and possible interpretations are discussed. The obtained results appear to support the original proposal that Solis Lacus may be a source of water vapor. Noachis-Hellespontus seems to be a similar vapor source

Huguenin, R. L.↗

Absorbers seen near the Venus cloud tops from Pioneer Venus

Pioneer Venus Orbiter measurements of planetary contrast at the Venus cloud tops are discussed. Images of the cloud tops at wavelengths between 1990 and 3400 A were obtained by the Pioneer UV Spectrometer together with broadband imagery and polarimetry at 2700 and 3650 A from the Orbiter Cloud Photopolarimeter at Venus phase angles of 33 to 130 deg. The planet is found to be darkest at the point where the UV Spectrometer line of sight penetrates perpendicular to the cloud tops, indicating that the absorbing material must be deep in the atmosphere. The contrast observed at wavelengths shortward of 3200 A is explained by SO2 absorption in the dark regions, while the persistence of the contrast at longer wavelengths requires the presence of an additional absorber or absorbers closely associated with the SO2, and a haze of submicron particles overlying the cloud tops in the bright regions. The correlations found between contrast and polarization indicate that no single constituent or change in vertical structure can account for the UV contrast. The origin of the markings is instead explained by a model in which absorbers subject to photochemical destruction are mixed upward into the cloud top region.

Esposito, L. W.↗

A Coupled Evaluation of Operational MODIS and Model Aerosol Products for Maritime Environments Using Sun Photometry: Evaluation of the Fine and Coarse Mode

Although satellite retrievals and data assimilation have progressed to where there is a good skill for monitoring maritime Aerosol Optical Depth (AOD), there remains uncertainty in achieving further degrees of freedom, such as distinguishing fine and coarse mode dominated species in maritime environments (e.g., coarse mode sea salt and dust versus fine mode terrestrial anthropogenic emissions, biomass burning, and maritime secondary production). For the years 2016 through 2019, we performed an analysis of 550 nm total AOD550, fine mode AOD (FAOD550; also known as FM AOD in the literature), coarse mode AOD (CAOD550), and fine mode fraction (η550) between Moderate Resolution Spectral Imaging Radiometer (MODIS) V6.1 MOD/MYD04 dark target aerosol retrievals and the International Cooperative for Aerosol Prediction (ICAP) core four multi-model consensus (C4C) of analyses/short term forecasts that assimilate total MODIS AOD550. Differences were adjudicated by the global shipboard Maritime Aerosol Network (MAN) and selected island AERONET sun photometer observations with the application of the spectral deconvolution algorithm (SDA). Through a series of conditional and regional analyses, we found divergence included regions of terrestrial influence and latitudinal dependencies in the remote oceans. Notably, MODIS and the C4C and its members, while having good correlations overall, have a persistent +0.04 to +0.02 biases relative to MAN and AERONET for typical AOD550 values (84th% < 0.28), with the C4C underestimating significant events thereafter. Second, high biases in AOD550 are largely associated with the attribution of the fine mode in satellites and models alike. Thus, both MODIS and C4C members are systematically overestimating AOD550 and FAOD550 but perform better in characterizing the CAOD550. Third, for MODIS, findings are consistent with previous reports of a high bias in the retrieved Ångström Exponent, and we diagnosed both the optical model and cloud masking as likely causal factors for the AOD550 and FAOD550 high bias, whereas for the C4C, it is likely from secondary overproduction and perhaps numerical diffusion. Fourth, while there is no wind-speed-dependent bias for surface winds <12 m s−1, the C4C and MODIS AOD550s also overestimate CAOD550 and FAOD550, respectively, for wind speeds above 12 m/s. Finally, sampling bias inherent in MAN, as well as other circumstantial evidence, suggests biases in MODIS are likely MODIS and the C4C products have their own strengths and challenges for a given climate application and discuss needed research. even larger than what was diagnosed here. We conclude with a discussion on how

Aerosols↗

Evaluation of VIIRS, GOCI, and MODIS Collection 6 AOD Retrievals Against Ground Sunphotometer Observations Over East Asia

Persistent high aerosol loadings together with extremely high population densities have raised serious air quality and public health concerns in many urban centers in East Asia. However, ground-based air quality monitoring is relatively limited in this area. Recently, satellite-retrieved Aerosol Optical Depth (AOD) at high resolution has become a powerful tool to characterize aerosol patterns in space and time. Using ground AOD observations from the Aerosol Robotic Network (AERONET) and the Distributed Regional Aerosol Gridded Observation Networks (DRAGON)-Asia Campaign, as well as from handheld sunphotometers, we evaluated emerging aerosol products from the Visible Infrared Imaging Radiometer Suite (VIIRS) aboard the Suomi National Polar-orbiting Partnership (S-NPP), the Geostationary Ocean Color Imager (GOCI) aboard the Communication, Ocean, and Meteorology Satellite (COMS), and Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) (Collection 6) in East Asia in 2012 and 2013. In the case study in Beijing, when compared with AOD observations from handheld sunphotometers, 51% of VIIRS Environmental Data Record (EDR) AOD, 37% of GOCI AOD, 33% of VIIRS Intermediate Product (IP) AOD, 26% of Terra MODIS C6 3km AOD, and 16% of Aqua MODIS C6 3km AOD fell within the reference expected error (EE) envelope (+/-0.05/+/- 0.15 AOD). Comparing against AERONET AOD over the JapanSouth Korea region, 64% of EDR, 37% of IP, 61% of GOCI, 39% of Terra MODIS, and 56% of Aqua MODIS C6 3km AOD fell within the EE. In general, satellite aerosol products performed better in tracking the day-to-day variability than tracking the spatial variability at high resolutions. The VIIRS EDR and GOCI products provided the most accurate AOD retrievals, while VIIRS IP and MODIS C6 3km products had positive biases.

Xiao, Q.↗

Applications of thermal infrared imagery for energy conservation and environmental surveys

The survey procedures, developed during the winter and summer of 1976, employ color and color infrared aerial photography, thermal infrared imagery, and a handheld infrared imaging device. The resulting imagery was used to detect building heat losses, deteriorated insulation in built-up type building roofs, and defective underground steam lines. The handheld thermal infrared device, used in conjunction with the aerial thermal infrared imagery, provided a method for detecting and locating those roof areas that were underlain with wet insulation. In addition, the handheld infrared device was employed to conduct a survey of a U.S. Army installation's electrical distribution system under full operating loads. This survey proved to be cost effective procedure for detecting faulty electrical insulators and connections that if allowed to persist could have resulted in both safety hazards and loss in production.

Carney, J. R.↗