Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “peak estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Applications of Power Spectral Analysis Methods to Maneuver Loads Obtained on Jet Fighter Airplanes During Service Operations

Power spectral densities of normal load factor have been obtained for two service operational training flights of a Republic F-84G airplane and three service operational training flights of a North American F-86A airplane in order to indicate the load-factor frequency content and possible uses of power spectral methods in analyzing maneuver load data. It was determined that the maneuvering load-factor time histories appeared to be described by a truncated normal distribution. The power spectral densities obtained were relatively level at frequencies below 0.03 cycle per second and varied inversely with approximately the cube of the frequency at the higher frequencies. In general, the frequency content was very low above 0.2 cycle per second. The load-factor peak distributions were estimated fairly well from the spectrum analysis. In addition, peak load data obtained during service operations of fighter-type airplanes with flight time totaling about 24,000 hours were examined and appeared to agree reasonably well with the type of equations obtained from spectrum peak-load distributions.

Mayer, John P.↗

Estimation of the intrinsic stresses in alpha-alumina in relation with its elaboration mode

The specific signatures of alpha-Al{sub 2}O{sub 3} by Fourier transform infrared (FTIR) spectroscopy were investigated to estimate the intrinsic stress in this compound according to its elaboration mode. Thus, alpha-alumina was prepared either by calcination of boehmite or gibbsite and also generated by oxidation of a metallic FeCrAl alloy. FTIR results were mainly supported by X-ray diffraction (XRD) patterns that allowed to determine the crystallite size and the strain in the various alpha aluminas. Moreover, the infrared peak at 378.7 cm{sup -1} was used as a reference for stress free alpha-alumina and the shift of this peak allowed to estimate intrinsic stresses, which were related to the morphology and to the specific surface area of aluminas according to their elaboration mode. These interpretations were confirmed by results obtained by cathodoluminescence experiments. - Graphical abstract: The infrared peak at 378.7 cm{sup -1} was used as a reference for stress free alpha-alumina and the shift of this peak allowed to estimate intrinsic stresses, which were related to the morphology and to the specific surface area of aluminas according to their elaboration mode.

36 MATERIALS SCIENCE↗

An early solar dynamo prediction: Cycle 23 is approximately cycle 22

In this paper, we briefly review the 'dynamo' and 'geomagnetic precursor' methods of long-term solar activity forecasting. These methods depend upon the most basic aspect of dynamo theory to predict future activity, future magnetic field arises directly from the magnification of pre-existing magnetic field. We then generalize the dynamo technique, allowing the method to be used at any phase of the solar cycle, through the development of the 'Solar Dynamo Amplitude' (SODA) index. This index is sensitive to the magnetic flux trapped within the Sun's convection zone but insensitive to the phase of the solar cycle. Since magnetic fields inside the Sun can become buoyant, one may think of the acronym SODA as describing the amount of buoyant flux. Using the present value of the SODA index, we estimate that the next cycle's smoothed peak activity will be about 210 +/- 30 solar flux units for the 10.7 cm radio flux and a sunspot number of 170 +/- 25. This suggests that solar cycle #23 will be large, comparable to cycle #22. The estimated peak is expected to occur near 1999.7 +/- 1 year. Since the current approach is novel (using data prior to solar minimum), these estimates may improve when the upcoming solar minimum is reached.

Schatten, Kenneth H.↗

An Early Prediction of the Amplitude of Solar Cycle 25

A “Solar Dynamo” (SODA) Index prediction of the amplitude of Solar Cycle 25 is described. The SODA Index combines values of the solar polar magnetic field and the solar spectral irradiance at 10.7 cm to create a precursor of future solar activity. The result is an envelope of solar activity that minimizes the 11-year period of the sunspot cycle. We show that the variation in time of the SODA Index is similar to several wavelet transforms of the solar spectral irradiance at 10.7 cm. Polar field predictions for Solar Cycles 21 – 24 are used to show the success of the polar field precursor in previous sunspot cycles. Using the present value of the SODA index, we estimate that the next cycle’s smoothed peak activity will be about 140 ± 30 solar flux units for the 10.7 cm radio flux and a Version 2 sunspot number of 135 ± 25. This suggests that Solar Cycle 25 will be comparable to Solar Cycle 24. The estimated peak is expected to occur near 2025.2 ± 1.5 year. Because the current approach uses data prior to solar minimum, these estimates may improve as the upcoming solar minimum draws closer.

Solar Cycle Predictions↗

Challenging a Global Land Surface Model in a Local Socio-Environmental System

Land surface models (LSMs) predict how terrestrial fluxes of carbon, water, and energy change with abiotic drivers to inform the other components of Earth system models. Here, we focus on a single human-dominated watershed in southwestern Michigan, USA. We compare multiple processes in a commonly used LSM, the Community Land Model (CLM), to observational data at the single grid cell scale. For model inputs, we show correlations (Pearson’s R) ranging from 0.46 to 0.81 for annual temperature and precipitation, but a substantial mismatch between land cover distributions and their changes over time, with CLM correctly representing total agricultural area, but assuming large areas of natural grasslands where forests grow in reality. For CLM processes (outputs), seasonal changes in leaf area index (LAI; phenology) do not track satellite estimates well, and peak LAI in CLM is nearly double the satellite record (5.1 versus 2.8). Estimates of greenness and productivity, however, are more similar between CLM and observations. Summer soil moisture tracks in timing but not magnitude. Land surface reflectance (albedo) shows significant positive correlations in the winter, but not in the summer. Looking forward, key areas for model improvement include land cover distribution estimates, phenology algorithms, summertime radiative transfer modelling, and plant stress responses.

54 ENVIRONMENTAL SCIENCES↗

Doppler radar observations of the three-dimensional turbulent structure of a quasi-steady thunderstorm

The spatial patterns and temporal evolution of Doppler radar-inferred turbulence within a quasi-steady, left-moving thunderstorm are reported. An organized downdraft circulation was observed, which maintained a persistent, continuously-propagating, anticyclonic and turbulent updraft. The updrafts attained peak speeds of 25 m/s, and maximum estimated reflectivity factors exhibited peak magnitudes of 50-55 dBZ. Mechanical and buoyant production appeared to be the primary generators of turbulence, although buoyancy generation may have also significantly contributed, since turbulent and dynamic entrainment into the vertically accelerating updraft was appreciable below the strongest turbulent activity at 7 km. Patterns of the radial shears of radial velocity exhibited a significant decrease in strength and areal coverage as the storm weakened, which is attributed to decreased activity of large turbulent eddies and the diminution of large-scale mean wind gradients produced by vertical exchanges of horizontal momentum and strong updraft gradients.

Knupp, K. R.↗

Diurnal variations of the Martian surface layer meteorological parameters during the first 45 sols at two Viking Lander sites

Wind speed, ambient and surface temperatures from both Viking Landers have been used to compute bulk Richardson numbers and Monin-Obukhov lengths during the earliest phase of the Mars missions. These parameters are used to estimate drag and heat transfer coefficients, friction velocities and surface heat fluxes at the two sites. The principal uncertainty is in the specification of the roughness length. Maximum heat fluxes occur near local noon at both sites, and are estimated to be in the range 15-20 W/sq m at the Viking 1 site and 10-15 W/sq m at the Viking 2 site. Maximum values of friction velocity occur in late morning at Viking 1 and are estimated to be 0.4-0.6 m/s. They occur shortly after dawn at the Viking 2 site where peak values are estimated to be in the range 0.25-0.35 m/s. Extension of these calculations to later times during the mission will require allowance for dust opacity effects in the estimation of surface temperature and in the correction of radiation errors of the Viking 2 temperature sensor.

Sutton, J. L.↗

Modeling of GE Appliances: Cost Benefit Study of Smart Appliances in Wholesale Energy, Frequency Regulation, and Spinning Reserve Markets

This report is the second in a series of three reports describing the potential of GE’s DR-enabled appliances to provide benefits to the utility grid. The first report described the modeling methodology used to represent the GE appliances in the GridLAB-D simulation environment and the estimated potential for peak demand reduction at various deployment levels. The third report will explore the technical capability of aggregated group actions to positively impact grid stability, including frequency and voltage regulation and spinning reserves, and the impacts on distribution feeder voltage regulation, including mitigation of fluctuations caused by high penetration of photovoltaic distributed generation. In this report, a series of analytical methods were presented to estimate the potential cost benefit of smart appliances while utilizing demand response. Previous work estimated the potential technical benefit (i.e., peak reduction) of smart appliances, while this report focuses on the monetary value of that participation. The effects on wholesale energy cost and possible additional revenue available by participating in frequency regulation and spinning reserve markets were explored.

appliances↗

Seasonal variation in methane ebullition in a temperate hydropower reservoir impacts annualized estimates

Estimates of ebullitive methane (CH4) emissions from reservoirs are highly uncertain, often based on spatial and temporal upscaling from a limited number of sampling sites and periods. While some of these estimates may adjust for seasonal variation in temperature, they rarely account for drawdown and the resulting changes in site depth and the areal extent of the reservoir. In Douglas Reservoir (Tennessee, USA), we conducted monthly sampling of 20 sites over 1 year to capture temporal and spatial variation in CH4 ebullition. We then compared various approaches for obtaining annualized, whole-reservoir ebullition estimates. CH4 ebullition fluxes were zero-inflated and highly skewed, with fluxes rising appreciably above zero in July and peaking in autumn. Estimates that did not account for drawdown overestimated annualized rates by 20%, though with high uncertainty. Seasonal variability and hotspots strongly influence annualized ebullition estimates and are important to account for in inventories and global upscaling.

Cardall, Anna [Brigham Young University]↗

National Dataset of EV Charging Stations With Estimates of Load and Vehicle Throughput

Current data from the AFDC provide locations and many details about EV charging stations, but not estimates of their peak loads or the number of vehicles they can accommodate. This dataset will augment the AFDC charging station locations with estimates of transmission load and vehicle throughput based on engineering specifications of the chargers, charging patterns based on vehicle types, battery capacities, and user behavior.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Waveform processing using neural network algorithms on the front-end electronics

In a multi-channel radiation detector readout system, waveform sampling, digitization, and raw data transmission to the data acquisition system constitute a conventional processing chain. The deposited energy on the sensor is estimated by extracting peak amplitudes, area under pulse envelopes from the raw data, and starting times of signals or time of arrivals. However, such quantities can be estimated using machine learning algorithms on the front-end Application-Specific Integrated Circuits (ASICs), often termed as “edge computing”. Edge computation offers enormous benefits, especially when the analytical forms are not fully known or the registered waveform suffers from noise and imperfections of practical implementations. In this work, we aim to predict peak amplitude from a single waveform snippet whose rising and falling edges containing only 3 to 4 samples. We thoroughly studied two well-accepted neural network algorithms, Multi-Layer Perceptron (MLP) and Convolutional Neural Network (CNN) by varying their model sizes. Further, to better fit front-end electronics, neural network model reduction techniques, such as network pruning methods and variable-bit quantization approaches, were also studied. By combining pruning and quantization, our best performing model has the size of 1.5 KB, reduced from 16.6 KB of its full model counterpart. It can reach mean absolute error of 0.034 comparing to that of a naive baseline of 0.135. Such parameter-efficient and predictive neural network models established feasibility and practicality of their deployment on front-end ASICs.

47 OTHER INSTRUMENTATION↗

Performance Assessment of a Dual-purpose HP-TES for a Typical Year Comparing Different Climate Zones

Complete electrification of heating and cooling systems in the United States would overload the existing electrical grid. To this end, recent research efforts have focused on energy storage as one way to reduce ever-increasing peak electricity demands. One such technology is heat pump integrated thermal-energy storage (HP-TES) systems, which can enable load-shifting and reduce demand during peak hours. In this work, a Modelica model of a 4-Ton, dual-mode (heating and cooling) HP-TES system using a room-temperature phase-change material (PCM) integrated through a secondary hydronic loop was developed and simulated for a typical meteorological year in Riverside, CA (ASHRAE Climate Zone 2B), and Chicago, IL (ASHRAE Climate Zone 5A), for a DOE small office prototype building. The COP improvement and demand reduction were analyzed during the time-of-use peak hours along with the required recharge cycle energy demand. A typical summer in Riverside, CA resulted in model-predicted peak COP increases of 50 – 100% compared to the baseline heat pump, especially at higher outdoor temperatures, coupled with maximum peak energy reductions of 22%. During shoulder and winter season simulations, heating energy savings were higher as outdoor temperatures dropped below the PCM phase change temperature. For Chicago, IL, backup heating was necessary to meet the required system capacity for very cold ambient conditions, resulting in winter peak energy savings between 16 – 60% when accounting for backup heating requirements. The recharge energy was found to be mostly below the baseline HP energy during the peak. With improved component selections and controls, the recharge energy may be reduced. The outcomes from the simulations can provide first-order estimates for potential peak energy savings, challenges, and required controls in any location before conducting any field testing.

25 ENERGY STORAGE↗

Modified jet noise source model for twin-jet shielding analysis

An analytical method to estimate the influence that a jet of heated flow has on the noise emission from a parallel jet is presented. The shielding jet is modelled as a cylinder of constant cross-section in which the flow speed and temperature are uniform throughout. The jet noise emission is modelled by a point source with directivity imposed. The directivity term consists of: a self-noise term, a shear-noise term, and a convection factor. The self- and shear-noise terms each contain a basic directivity factor multiplying a spectral shape function. The various components are evaluated based on comparison with isothermal jet radiation experimental data. The modified source term is incorporated into the jet shielding model and compared to heated twin jet shielding data. The estimated spectra agree well except further downstream of the nozzle where peak of the noise spectrum estimated by the model lies approximately one octave below the experimental peak. The noise reduction estimated by the model agrees favorably with experiment in the near downstream region. This discrepancy is explained in terms of the shielding mechanism which is dominant far downstream.

Gerhold, C. H.↗

Analysis of subpixel registration

The area of subpixel accuracy in image registration and edge detection was studied. Two main directions of research were pursued, edge detection and matching based on the digital geometry of edges, and random field models for probablistic analysis of registration error. In the edge detection approach, error bounds and error probabilities were computed using theoretical models. Algorithms were developed and tests on simulated imagery. The methods appear promising for high accuracy edge position estimation and registration, though further refinement of the procedures is required. Using random field models, a statistical measure of the quality of the cross correlation peak as an estimate of the offset between a sensed and a reference image was developed. Simulations were performed to determine the validity of this estimte with real imagery and to study the results of interpolating digital correlation functions to estimate the translation offset to subpixel accuracy.

Berenstein, C. A.↗

Final Report: Levitated Dipole Experiment

Since the very first experiments with the LDX, research progress was rapid and significant. Initial experiments were conducted with the high-field superconducting coil suspended by three thin rods. These experiments produced long-pulse, quasi-steady-state microwave discharges, lasting more than 10 s, having peak beta values of 20%. High-beta, near steady-state discharges have been maintained in LDX for more than 20 seconds, and this capability makes LDX the longest pulse fusion confinement experiment now operating in the U.S. fusion program. In both supported and levitated configurations, detailed measurements are made of discharge evolution, plasma dynamics and instability, and the roles of gas fueling, microwave power deposition profiles, and plasma boundary shape. High-temperature plasma is created by multifrequency electron cyclotron resonance heating allowing control of heating profiles. Depending upon neutral fueling rates, the LDX discharges contain a fraction of energetic electrons, with mean energies above 50 keV. Depending on whether or not the superconducting dipole is levitated or supported, the peak thermal electron temperature is estimated to exceed 500 eV and peak densities reach 10 18 m -3 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Report: Levitated Dipole Experiment

Since the very first experiments with the LDX, research progress was rapid and significant. Initial experiments were conducted with the high-field superconducting coil suspended by three thin rods. These experiments produced long-pulse, quasi-steady-state microwave discharges, lasting more than 10 s, having peak beta values of 20% [Garnier et al., Physics of Plasmas, 13 (2006) 056111]. High- beta, near steady-state discharges have been maintained in LDX for more than 20 seconds, and this capability made LDX the longest pulse fusion confinement experiment operating in the U.S. fusion program. A significant measure of progress in the LDX research program was the routine investigation of plasma confinement with a magnetically-levitated dipole and the resulting observations of confinement improvement. In both supported and levitated configurations, detailed measurements were made of discharge evolution, plasma dynamics and instability, and the roles of gas fueling, microwave power deposition profiles, and plasma boundary shape. High-temperature plasma was created by multi frequency electron cyclotron resonance heating at 2.45 GHz, 6.4 GHz, 10.5 GHz and 28 GHz allowing control of heating profiles. Depending upon neutral fueling rates, the LDX discharges contain a fraction of energetic electrons, with mean energies above 50 keV. Depending on whether or not the superconducting dipole was levitated or supported, the peak thermal electron temperature was estimated to exceed 500 eV and peak densities to approach 1e18 m -3 . We have found that levitation causes a strong inwards density pinch [Boxer et al., Nature Physics, 6 (2010) 207] and we have observed the central plasma density increase dramatically indicating a significant improvement in the confinement of a thermal plasma species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Estimation of the two-dimensional ocean current shear field with a synthetic aperture radar

A double inverse method to convert SAR data to estimates of current shear was developed theoretically. Problems of applying the technique to real SAR data were examined. The first step of the inversion process involved elimination of noise in the (x-vector, k-vector) wave spectra deduced from SAR images. The second step, estimation of current shear, required the existence of well defined swell and a favorable single of interaction between swell and ocean current. Application of the method in the Antarctic circumpolar current encountered sea conditions that both satisfied and violated these requirements. Where the wave-current geometry was favorable, realistic surface current velocity fields were obtained, suggesting the presence of a substantial mesoscale eddy. Another attempt to apply the method in the Gulf Stream produced wave spectral estimates that showed no clear peak and hence produced no current estimates.

Barnett, Tim P.↗

Evaluation of Tablet-Based Methods for Assessment of Contrast Sensitivity

Some astronauts have suffered degradation of vision during long-duration space flight, suffering from a condition that has come to be known as Spaceflight Associated Neuro-ocular Syndrome (SANS). While related morphological changes can be observed with imaging technologies such as optical coherence tomography (OCT), it may be useful to have a rapid method for functional vision assessment. In this paper, we compare three tablet-based methods for rapid assessment of contrast sensitivity. First, a relatively novel method developed expressly for touch screens, in which the subject ”swipes” a frequency/contrast sweep grating to indicate the boundary between visible and invisible patterns; second, a method-of-adjustment task in which the subject adjusts the contrast of a grating patch up and down to bracket the visual threshold; and third, a traditional temporal two-alternative forced choice (2AFC) task, in which the subject is presented with a near-threshold stimulus in one of two intervals, and must report the interval containing the stimulus. The swipe method shows variability comparable to the 2AFC method, and shows good agreement in estimates of the spatial frequency of peak sensitivity. The absolute sensitivity estimated with the swipe method is higher than that of the other methods, perhaps because subjects are biased to trace outside of the visible pattern region, or perhaps due to stimulus differences.

Mulligan, Jeffrey B.↗