Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxygen vacancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

N2-to-NH3 conversion by excess electrons trapped in point vacancies on 5f-element dioxide surfaces

Ammonia (NH 3 ) is one of the basic chemicals in artificial fertilizers and a promising carbon-free energy storage carrier. Its industrial synthesis is typically realized via the Haber−Bosch process using traditional iron-based catalysts. Developing advanced catalysts that can reduce the N 2 activation barrier and make NH 3 synthesis more efficient is a long-term goal in the field. Most heterogeneous catalysts for N 2 -to-NH 3 conversion are multicomponent systems with singly dispersed metal clusters on supporting materials to activate N 2 and H 2 molecules. Herein, we report single-component heterogeneous catalysts based on 5 f actinide dioxide surfaces (ThO 2 and UO 2 ) with oxygen vacancies for N 2 -to-NH 3 conversion. The reaction cycle we propose is enabled by a dual-site mechanism, where N 2 and H 2 can be activated at different vacancy sites on the same surface; NH 3 is subsequently formed by H − migration on the surface via associative pathways. Oxygen vacancies recover to their initial states after the release of two molecules of NH 3 , making it possible for the catalytic cycle to continue. Our work demonstrates the catalytic activities of oxygen vacancies on 5 f actinide dioxide surfaces for N 2 activation, which may inspire the search for highly efficient, single-component catalysts that are easy to synthesize and control for NH 3 conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Support Effect and Surface Reconstruction in In 2 O 3 / m- ZrO 2 Catalyzed CO 2 Hydrogenation

Here, we investigate the chemical and structural dynamics at the interface of In 2 O 3 /m-ZrO 2 and their consequences on the CO 2 hydrogenation reaction (CO 2 HR) under reaction conditions. While acting to enrich CO 2 , monoclinic zirconia (m-ZrO 2 ) was also found to serve as a chemical and structural modifier of In 2 O 3 that directly governs the outcome of the CO 2 HR. These modifying effects include the following: (1) Under reaction conditions (above 623 K), partially reduced In 2 O 3 , i.e., InO x (0 < x < 1.5), was found to migrate in and out of the subsurface of m-ZrO 2 in a semireversible manner, where m-ZrO 2 accommodates and stabilizes InO x by serving as a reservoir. The decreased concentration of surface InO x under elevated temperatures coincides with significantly decreased selectivity toward methanol and a sharp increase of the reverse water–gas shift reaction. The reconstruction-induced variation of InO x concentration appears to be one of the most important factors contributing to the altered catalytic performance of CO 2 HR at different reaction conditions. (2) The strong interactions and reactions between m-ZrO 2 and In 2 O 3 result in the activation of a pool of In–O bonds at the In 2 O 3 /m-ZrO 2 interface to form oxygen vacancies. On the other hand, the high dispersity of In 2 O 3 nanostructures onto m-ZrO 2 prevents their over-reduction under catalytically relevant conditions (up to 673 K), when bare In 2 O 3 is unavoidably reduced into the metallic phase (In 0 ). The relationship between the extent of reduction of In 2 O 3 and catalytic performance (CO 2 conversion, CH 3 OH selectivity, or yield of CH 3 OH) suggests the presence of an optimum coverage of surface InO x and oxygen vacancies under reaction conditions. The conventional model that links catalytic performance solely to the coverage of oxygen vacancies appears invalid in the present case. In situ analysis also allows the observation of surface reaction intermediates and their interconversions, including the reduction of CO 3 * into formate, a precursor for the formation of methanol and CO. The combinative ex situ and in situ study sheds light on the reaction mechanism of the CO 2 HR on In 2 O 3 /m-ZrO 2 -based catalysts. Our findings on the large-scale surface reconstructions, support effect, and the reaction mechanism of In 2 O 3 /m-ZrO 2 for CO 2 HR may apply to other related metal oxide catalyzed CO 2 reduction reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Correlations for the specific heat capacity of ( U x Pu 1 - x ) 1 - y Gd y O 2 - z derived from molecular dynamics

We report UO 2 is the primary conventional fuel used in most nuclear reactors with Gd 2 O 3 commonly added as a burnable absorber to produce a more level power distribution in the reactor core at the beginning of operation. It can also be mixed with other actinide oxides to produce mixed oxide (MOx) fuel. In this study, molecular dynamics simulations were used to predict the specific heat capacity of Gd-doped PuO 2 , UO 2 and (U, Pu)O 2 MOx accommodating Gd 3+ substituted at cation sites via two charge compensation mechanisms - oxygen vacancy formation and the oxidation of U 4+ to U 5+ . The specific heat capacity values for PuO 2 and UO 2 are in good agreement with other studies showing a distinct peak at high temperatures - above 1800 K. As Gd 3+ is added, the peak height reduces for each composition considered. An analytical fit was applied to the data where Gd 3+ was fully charge compensated by either oxygen vacancies or U 5+ . The expression was then validated by predicting the specific heat capacity for three compositions of (Ux Pu 1-x ) 1-y Gd y O 2-z containing both oxygen vacancies and U 5+ , and compared to molecular dynamics data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Active and passive defects in tetragonal tungsten bronze relaxor ferroelectrics

Tetragonal tungsten bronze (TTB) based oxides constitute a large family of dielectric materials which are known to exhibit complex distortions producing incommensurately modulated superstructures as well as significant local deviations from their average symmetry. The local deviations produce diffuse scattering in diffraction experiments. The structure as well as the charge dynamics of these materials are anticipated to be sensitive to defects, such as cation or oxygen vacancies. In this work, in an effort to understand how the structural and charge dynamical properties respond to these two types of vacancy defects, we have performed measurements of dielectric susceptibilities and single crystal diffraction experiments of two types of TTB materials with both ‘filled’ (Ba 2 NdFeNb 4 O 15 and Ba 2 PrFeNb 4 O 15 ) and ‘unfilled’ (Sr 0.5 Ba 0.5 Nb 2 O 6 ) cation sublattices. We also perform these measurements before and after oxygen annealing, which alters the oxygen vacancy concentrations. Surprisingly, we find that many of the diffuse scattering features that are present in the unfilled structure are also present in the filled structure, suggesting that the random fields and disorder that are characteristic of the unfilled structure are not responsible for many of the local structural features that are reflected in the diffuse scattering. Furthermore, oxygen annealing clearly affected both color and dielectric properties, consistent with a diminishment of the oxygen vacancy concentration, but had little effect on observed diffuse patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Engineering of Grain Boundaries in CeO 2 Enabling Tailorable Resistive Switching Properties

Abstract Defect engineering in valence change memories aimed at tuning the concentration and transport of oxygen vacancies are studied extensively, however mostly focusing on contribution from individual extended defects such as single dislocations and grain boundaries. In this work, the impact of engineering large numbers of grain boundaries on resistive switching mechanisms and performances is investigated. Three different grain morphologies, that is, “random network,” “columnar scaffold,” and “island‐like,” are realized in CeO 2 thin films. The devices with the three grain morphologies demonstrate vastly different resistive switching behaviors. The best overall resistive switching performance is shown in the devices with “columnar scaffold” morphology, where the vertical grain boundaries extending through the film facilitate the generation of oxygen vacancies as well as their migration under external bias. The observation of both interfacial and filamentary switching modes only in the devices with a “columnar scaffold” morphology further confirms the contribution from grain boundaries. In contrast, the “random network” or “island‐like” structures result in excessive or insufficient oxygen vacancy concentration migration paths. The research provides design guidelines for grain boundary engineering of oxide‐based resistive switching materials to tune the resistive switching performances for memory and neuromorphic computing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of strain on SrFeO 3-δ oxidation, reduction, and water dissociation: Insights from ambient pressure X-ray photoelectron spectroscopy

The oxidation and reduction of metal oxides and their interaction with the environment play a critical role in their use for energy storage and conversion applications. The formation of surface adsorbates and their impact on oxide electronic structure can be challenging to probe experimentally, particularly for thin films which enable the study of epitaxial strain but have low surface areas. Here we present a detailed study using ambient pressure X-ray photoelectron spectroscopy of the reduction and oxidation of strained SrFeO 3-δ , induced by changes in temperature, oxygen partial pressure, and water vapor exposure. We find that in comparison to the oxidized lattice, application of tensile strain promotes the formation of oxygen vacancies at the surface, facilitating the subsequent incorporation of oxygen into the lattice in an oxygen environment. While tensile strain does promote the formation of hydroxyls from water dissociation, the kinetics of this process appear more sluggish than on less-strained surfaces, likely due to a competitive surface interaction with oxygen or bulk absorption of hydroxyl species. These findings relating strain, oxygen vacancies, and surface reactivity yield important insight into the surface functionality of oxides for energy conversion and storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Operando leaching of pre-incorporated Al and mechanism in transition-metal hybrids on carbon substrates for enhanced charge storage

Insufficient exposure and utilization of active sites often induces an inferior reactivity for transition-metal-based two-dimensional (2D) materials. In response, we for the first time propose a universal "nano-tailoring" strategy to incorporate abundant defects and active sites into low-crystallinity nanosheets by electrochemically leaching of Al species. With MnAl layered double hydroxides (LDHs) as a representative example, potassium-birnessite MnO 2 (AK-MnO 2 ) with oxygen vacancies and abundant edge sites is successfully produced. The oxygen vacancies are shown to help optimize the electron-transfer and ion-adsorption capability. These integrated advantages endow the AK-MnO 2 with a high capacitance value of 239 F g –1 at 100 A g –1 . By further combining with soft X-ray absorption spectroscopy techniques, we unravel that the reducibility of M 2+ in M 2+ Al-LDH serves as the key descriptor for the reconstruction rate. Here, this "nano-tailoring" strategy can provide some important implications and clues to manipulating 2D materials for efficient energy storage and conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Developing a Chemical and Structural Understanding of the Surface Oxide in a Niobium Superconducting Qubit

We report superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a detailed assessment of the surface oxide that forms in ambient conditions for transmon test qubit devices patterned from a niobium film. We observe that this oxide exhibits a varying stoichiometry with NbO and NbO 2 found closer to the niobium film and Nb 2 O 5 found closer to the surface. In terms of structural analysis, we find that the Nb 2 O 5 region is semicrystalline in nature and exhibits randomly oriented grains on the order of 1-2 nm corresponding to monoclinic N-Nb 2 O 5 that are dispersed throughout an amorphous matrix. Using fluctuation electron microscopy, we are able to map the relative crystallinity in the Nb 2 O 5 region with nanometer spatial resolution. Through this correlative method, we observe that amorphous regions are more likely to contain oxygen vacancies and exhibit weaker bonds between the niobium and oxygen atoms. Based on these findings, we expect that oxygen vacancies likely serve as a decoherence mechanism in quantum systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Preparation and electrochemical properties of high-entropy oxide Li x (CrMnCoNiZn) 3-x O 4

High-entropy oxides (HEOs) have gained significant attention as anode materials for lithium-ion batteries (LIBs) due to their high theoretical specific capacity, synergistic effects of constituent elements, and enhanced structural stability induced by high entropy. Here, this study investigates the electrochemical properties of a novel series of HEOs, Li x (CrMnCoNiZn) 3-x O 4 , synthesized via the sol-gel method. As lithium content increases, the electrochemical lithium storage performance of the HEOs improves, attributed to the rise in high-valence states and oxygen vacancies. The high valence state of elements facilitates greater electron transfer, enhancing the specific capacity during lithium insertion. Additionally, a higher concentration of oxygen vacancies boosts ionic conductivity and lithium ion diffusion kinetics, leading to superior electrochemical performance. Among the synthesized materials, Li 0.11 (CrMnCoNiZn) 2.89 O 4 exhibited the best performance, delivering a discharge capacity of 365 mAh·g −1 after 100 cycles at 100 mA·g −1 , 257 mAh·g −1 after 1000 cycles at 1 A·g −1 , and a rate capacity of 196 mAh·g −1 at 2 A·g −1 . The Li + diffusion coefficient reached 2.78 × 10 −15 cm 2 ·s −1 . This work not only deepens the understanding of HEOs' electrochemical behavior in LIBs but also provides insights into the impact of lithium ion substitution on their performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Efficient CO2 and Natural Gas Refinery for Ethylene Production - Catalyst Development for Oxidative Coupling of Methane (OCM)

We designed a new electro-catalyst for oxidative coupling of methane (OCM) reaction, the structure of the Sc doped La0.3Sr0.7TiO3-d (LaSrTi) Sc doping to LaSrTi leading to lattice expansion and more distorted lattice, Investigated the effect of doping on the oxygen vacancy formation energy DFT calculations shows that Sc doping facilitate oxygen vacancy formation. Quantifying the surface basicity of the sample before and after Sc doping Sc doped sample exhibits high surface basicity.

catalysis↗
DOE OSTI2023

Plasmonic Energetic Electrons Drive CO 2 Reduction on Defective Cu 2 O

Plasmonic photoreduction of CO 2 is valuable for decarbonization and producing value-added chemicals. However, insights into the mechanisms of this reaction remain elusive, particularly regarding the roles of structural defects and their interplay with the nonequilibrium charge carriers. Here, we report density functional theory calculations on Cu 2 O, a prototype photocatalyst, through which we investigate CO 2 reduction over three defected facets to reveal the interfacial charge transfer and bond dynamics under plasmonic excitation. We find that the activation barrier of C–O bond cleavage decreases from 3.2 to about 1 eV, assisted by oxygen vacancies, and that the remaining barrier can be further reduced or eliminated at the plasmon-excited states when Cu 2 O is integrated with plasmonic metals. The regeneration of oxygen vacancies (by H 2 to form water) on Cu 2 O to complete the catalysis cycle is feasible and not affected by the energetic electrons. Furthermore, our calculations thus show the important synergistic effect of energetic electrons and point defects to promote CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Engineering metal-oxide interface by depositing ZrO 2 overcoating on Ni/Al 2 O 3 for dry reforming of methane

Zirconium oxide (ZrO 2 ) was deposited onto Ni/Al 2 O 3 catalyst as overcoating by atomic layer deposition (ALD) for dry reforming of methane (DRM). High-temperature heating during H-2-reduction could transform the ALD-prepared ZrO 2 thin film to tetragonal phase and crack the encapsulating layer on Ni sites, which constructed a beneficial Ni-ZrO x interface. Here, interfacial surface oxygen vacancies on ZrO 2 overcoating were induced by the partial reduction of ZrO 2 surface during high-temperature H 2 reduction, with the assistance of Ni. During DRM, the interfacial oxygen vacancies enhanced CO 2 activation by dissociating CO 2 and releasing active O, thereby limiting carbon formation. For DRM at 700 °C and 800 °C, Ni/Al 2 O 3 with 5 cycles of ZrO 2 ALD overcoating enhanced both activity and stability significantly. For a 100-h DRM test at 600 °C, no deactivation was observed for the Ni/Al 2 O 3 catalyst with 10 cycles of ZrO 2 ALD overcoating, as compared to 59% relative activity loss of Ni/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Computationally Accelerated Discovery of High Entropy Pyrochlore Oxides

High entropy ceramics provide enhanced flexibility for tailoring a wide range of physical properties, emerging from the diverse chemical and configurational degrees of freedom. Expanding upon the endeavors of recently synthesized high entropy ceramics in rock salt, fluorite, spinel, and perovskite structures, we explore the relative feasibility of formation of high entropy pyrochlore oxides, A 2 B 2 O 7 , with multication occupancy of the B-site, estimated from first-principles-based thermodynamic descriptors. Subsequently, we used Monte Carlo simulations to estimate the phase composition, oxygen vacancy concentration, and local ionic segregation as a function of temperature and oxygen partial pressure. In synergy with the theoretical calculations, we have investigated the synthesis of several multicomponent oxides with a pyrochlore composition, related to our computational investigations, resulting in four phase pure and one 97.4% pure high entropy pyrochlore oxides. Ultimately, our approach allows us to evaluate potential impurity phases, ionic disorder, and oxygen vacancy concentration in response to the experimental variables, thereby making realistic predictions that can direct and accelerate experimental synthesis of novel multicomponent ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Intervening Oxygen Enabled Magnetic Moment Modulation in Spinel Nanostructures

Oxygen vacancies and lattice oxygen on the surface of nanoparticles play crucial roles in the magnetism of transition metal oxides. A fundamental understanding of the interactions between the 2p orbitals of oxygen anions and the 3d orbitals of metal cations is of immense interest for applications due to specific electronic, magnetic, and chemical properties. The spinel nanostructures Co 3 O 4 ,Fe 3 O 4 , and CoFe 2 O 4 present a unique model to alter coordination and bonding due to d electrons and oxygen 2p states. We performed complementary experimental techniques and corresponding model calculations to show that the overall net magnetism differs significantly between the O 2 -rich and -deficient environments. It was found that in monometallic spinel oxides (e.g., Co 3 O 4 and Fe 3 O 4 ), the changes in the spin moment are relatively small (~0.08μ B per formula unit) compared to those in the bimetallic spinel oxide CoFe 2 O 4 (~0.40 μ B per formula unit). Finally, our study illustrates that the O 2 -rich/deficient conditions alter the exchange of O h sites and adjust the metal ion moments so as to impact the overall magnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Node support input to HydroGEN STCH project quarterly report

n this quarter, we further refined our water splitting (WS) reaction calculations on the surface of SrTi 0.5 Mn 0.5 O 3 . Among various surface configurations for WS imposed by surface orientations, terminations, and neighboring chemical species, we hypothesized that (1) the WS reaction energy should be exothermic and (2) the surface oxygen vacancy formation energy should be in a reasonable range compared to the bulk oxygen vacancy formation energy to be accessible during the reduction and WS reaction conditions.

08 HYDROGEN↗
DOE OSTI2021

Active Tuning of Optical Constants in the Visible–UV: Praseodymium-Doped Ceria—a Model Mixed Ionic–Electronic Conductor

Mixed ionic-electronic conductors offer chemical and electrical means for active tuning of their optical constants, e.g. with variations in oxygen non-stoichiometry in Pr 0.1 Ce 0.9 O 2-δ , enabling implementation of adaptive thin film optical devices. Here, we demonstrate in-situ chemo-tuning of the extinction coefficient in Pr 0.1 Ce 0.9 O 2-δ at elevated temperatures and provide a tuning model that treats the interdependence of mobile oxygen vacancies and small polarons coupled to variations in optically active praseodymium ions. Further, a new means for electro-tuning of the optical constants of mixed ionic-electronic conductors was demonstrated experimentally and modeled for Pr 0.1 Ce 0.9 O 2-δ thin films deposited on grid-like electrode structures. Modeling of non-steady state optical transmittance modulations in the latter allows for estimation of oxygen vacancy mobility that determines the switching speed of the device. Quenched-in values of nr and k to room temperature become nonvolatile, providing a modulation range in the extinction coefficient of Δk ~0.1 (change of ~800%) and in the refractive index of Δn r ~0.1 (relative to initial n r of ~2.35). Key figures of merit including, transmission optical modulation of ~0.04 per 1 mV nm -1 , switching energy per area of 670 pJ μm -2 and switching times of seconds, were demonstrated, with further improvements possible.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Analysis of defects in In 2 O 3 :H synthesized in presence of water vapor and hydrogen gas mixture

Using hybrid functional-based density functional theory calculations, we analyze the structure and kinetics of defects formed in two competing synthesis routes to prepare hydrogen-doped In 2 O 3 films, using a hydrogen and oxygen gas mixture vs synthesis in the presence of water vapor. For both of these synthesis routes, we find that H + is the dominant defect species: when the Fermi level is close to the conduction band, H + has a lower formation energy than other intrinsic or extrinsic defects. Our results also suggest that water molecules spontaneously split into H + (which occupies octahedral voids) and OH – interstitials (which occupies vacant oxygen lattice sites or oxygen vacancies). From the analysis of the binding energies between these different defects, we conclude that these defects do not cluster and are most likely to stay spatially distributed throughout the films. In addition, the sum of formation energies of an oxygen (i.e., O$^{2–}_i$) and a H + interstitial is close to the formation energy of a OH – interstitial, meaning that water molecules are completely split into 2H + and O$^{2–}_i$ at the synthesis conditions. Further, in the presence of H 2 + O 2 gas mixture, oxygen interstitials occupy oxygen vacancies while hydrogen interstitials occupy vacant oxygen lattice sites and form bonds with lattice oxygens. Our analysis of the defect equilibria suggests that the hydrogen content in films synthesized in the presence of water vapor is higher than films synthesized in the presence of a hydrogen gas mixture. At high dopant concentrations, a hydrogen bond network is formed in the system and this leads to large distortions in the lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗