Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optoelectronic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Transient X-ray Diffraction Reveals Nonequilibrium Phase Transition in Thin Films of CH 3 NH 3 PbI 3 Perovskite

Advantageous optoelectronic properties of methylammonium lead triiodide likely arise from coupling between photogenerated charge-carriers and the soft, deformable lattice. We investigate structural dynamics of MAPbI 3 films using time-resolved X-ray diffraction versus pump-probe time delay and pump intensity. During the first nanosecond, the lattice anisotropically distorts from tetragonal to cubic at excitation intensities that are insufficient to thermally induce the first-order thermodynamic phase transition at 330K. Further, the high-symmetry structure then relaxes back to the starting phase with 11 and 236-ns time constants via a different transition pathway than observed either in the first nanosecond or in previous reports for MAPbI 3 . Early-time dynamics are consistent with polaron formation and lattice strain stabilization while the slower recovery dynamics outlive radiative recombination and relates metastability. Fluence-independence of these lattice deformations in the low-power regime conveys relevance to optoelectronics including photovoltaics and highlights sustained involvement of non-equilibrium, photoinduced lattice reorganization in MAPbI 3 under functional conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultrafast hole transfer from monolayer ReS 2 to thin-film F 8 ZnPc

We report a combined experimental and computational study on the charge transfer properties of heterostructures formed by monolayer 1T’-ReS 2 and fluorinated zinc phthalocyanine, F 8 ZnPc. Two-dimensional (2D) ReS 2 monolayer flakes were exfoliated from bulk crystals, and a F 8 ZnPc film with a thickness of 4 nm was thermally deposited on ReS 2 . Density functional theory shows that the two materials form a type-II band alignment. In transient absorption measurements, photocarriers are selectively excited in ReS 2 and monitored in F 8 ZnPc. Here, we found that holes in ReS 2 can transfer to F 8 ZnPc on a time scale shorter than 0.35 ps. The transferred holes have a long lifetime in F 8 ZnPc on the order of 1 ns, confirming the lack of electron transfer. The efficient charge transfer from a 1T’ transition metal dichalcogenide monolayer to an organic semiconductor illustrates the feasibility of developing 2D/organic heterostructures with in-plane anisotropic electronic and optoelectronic properties.

2D materials↗
DOE OSTI2026

Atomic Alignment in PbS Nanocrystal Superlattices with Compact Inorganic Ligands via Reversible Oriented Attachment of Nanocrystals

Nanocrystals (NCs) serve as versatile building blocks for the creation of functional materials with NC self-assembly offering opportunities to enable novel material properties. Here, in this work, we demonstrate that PbS NCs functionalized with strongly negatively charged metal chalcogenide complex (MCC) ligands, such as Sn 2 S 6 4– and AsS 4 3– , can self-assemble into all-inorganic superlattices with both long-range superlattice translational and atomic-lattice orientational order. Structural characterizations reveal that the NCs adopt an unexpected edge-to-edge alignment, and numerical simulation clarifies that orientational order is thermodynamically stabilized by many-body ion correlations originating from the dense electrolyte. Furthermore, we show that the superlattices of Sn 2 S 6 4– -functionalized PbS NCs can be fully disassembled back into the colloidal state, which is highly unusual for orientationally attached superlattices with atomic-lattice alignment. The reversible oriented attachment of NCs, enabling their dynamic assembly and disassembly into effectively single-crystalline superstructures, offers a pathway toward designing reconfigurable materials with adaptive and controllable electronic and optoelectronic properties.

Landau-Ginzburg theory↗
DOE OSTI2020

Boosting Photoelectric Conductivity in Porphyrin-Based MOFs Incorporating C 60

Electronic structure calculations show that guest C60 in the porphyrin-containing metal organic frameworks Zn 2 (TCPB)(DA-ZnP) (DA-MOF; H 4 TCPB = 1,2,4,5-tetrakis(4-carboxyphenyl)benzene, DA-ZnP = [5,15-bis[(4-pyridyl)ethynyl]-10,20-diphenylporphinato]zinc(II)) and Zn 2 (TCPB)(F-ZnP) (F-MOF; F-ZnP = [5,15-di(4-pyridyl)-10,20-bis(pentafluorophenyl)porphinato]zinc(II)) engenders high photoelectrical conductivity due to efficient donor–acceptor charge-transfer (CT) interactions. Structural modifications at the meso position of the porphyrin influence the preferred positions of C 60 within the frameworks, giving rise to host–guest interactions with different anisotropic structural, electronic, and optoelectronic properties. A preferred slipped-parallel π-stacked interaction of C 60 that is predicted for NH 2 -substituted DA-MOF and F-MOF fosters strong CT transitions and lowers band gaps by ~1.0 eV compared to the pristine DA-MOF and F-MOF. Hopping rates computed using Marcus theory are found to be anisotropic and accelerated by multiple orders of magnitude across π-stacked interfaces created by C 60 incorporation, a consequence of strong electronic coupling between initial and final diabatic states. Calculations indicate that photoinduced electron transfer, as well as direct CT from porphyrin to C 60 upon irradiation, triggers a charge separation process that leads to the formation of what should be long-lived electron-trapped states at the heterojunctions. Lastly, design principles revealed here for the control of photophysical and electron-transfer processes will be useful for constructing new MOF-derived visible- and infrared-based optoelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Bidentate Ligand-Induced Oriented Transformation of CsPbBr 3 Perovskite Nanocrystals into Nanowires for X-ray Photodetectors

We report shape and dimensionality control by ligands is an efficient way to fabricate high-quality perovskite nanocrystals (NCs) with optoelectronic properties. Herein, to realize oriented transformations between different morphologies of CsPbBr 3 nanocrystals, we conceived of the use of defects and bidentate ligands to synergistically drive the reorientation of CsPbBr3nanocrystals into CsPbBr 3 nanowires (NWs). By employing aminocaproic acid as the bidentate ligand, CsPbBr 3 NWs were reconstructed from the CsPbBr 3 NCs (~7 nm) with 20-60 nm in width and several micrometers in length, as well as a 527 nm photoluminescence (PL) peak, 59% PL quantum yield, and 98.5 ns PL lifetime. The bidentate ligand-directed anisotropic shape evolution and growth of perovskite NWs from NCs was elucidated by transmission electronmicroscopy and PL studies. The photodetectors fabricated with the reconstructed CsPbBr 3 NWs displayed a photocurrent enhancement (2.75 × 10 -11 A) compared with that of the devices based on solution-synthesized NWs (2.28 × 10 -11 A). The device also showed a short response time, indicating its more sensitive photoelectric response. This process provides a viable approach to engineering diverse morphologies of perovskite nanocrystals for optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Shape Control of Colloidal Semiconductor Nanocrystals through Thermodynamically Driven Aggregative Growth

The optoelectronic properties of colloidal semiconductor nanocrystals (NCs) can be manipulated by changing their geometric shapes. The precise synthetic control over particle morphologies, however, has remained elusive. Conventional growth techniques rely on the kinetic assembly of atomic units, where supersaturation and precipitation processes can lead to a broad distribution of particle shapes. In this paper, we demonstrate that replacing atomic precursors with small-size nanocrystals as building blocks for larger colloids offers an easier, more predictive control over nanoparticle shape evolution. The reported growth strategy is illustrated via shape-selective syntheses of CdSe and CdS NC cubes, spheres, rods, as well as unprecedented “donut” and ring-like structures. Growth of desired particle morphologies was achieved by choosing an appropriate reaction solvent that minimizes the surface free energy through a unique shape formation. This so-called "aggregative growth mechanism" is explained using a thermodynamic model for interacting viscous colloids. We expect that this novel growth strategy will offer a viable platform for shape–selective synthesis of many inorganic colloids, providing pathways to optimizable optoelectronic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chemical crystallography by serial femtosecond X-ray diffraction

Abstract Inorganic–organic hybrid materials represent a large share of newly reported structures, owing to their simple synthetic routes and customizable properties 1 . This proliferation has led to a characterization bottleneck: many hybrid materials are obligate microcrystals with low symmetry and severe radiation sensitivity, interfering with the standard techniques of single-crystal X-ray diffraction 2,3 and electron microdiffraction 4–11 . Here we demonstrate small-molecule serial femtosecond X-ray crystallography (smSFX) for the determination of material crystal structures from microcrystals. We subjected microcrystalline suspensions to X-ray free-electron laser radiation 12,13 and obtained thousands of randomly oriented diffraction patterns. We determined unit cells by aggregating spot-finding results into high-resolution powder diffractograms. After indexing the sparse serial patterns by a graph theory approach 14 , the resulting datasets can be solved and refined using standard tools for single-crystal diffraction data 15–17 . We describe the ab initio structure solutions of mithrene (AgSePh) 18–20 , thiorene (AgSPh) and tethrene (AgTePh), of which the latter two were previously unknown structures. In thiorene, we identify a geometric change in the silver–silver bonding network that is linked to its divergent optoelectronic properties 20 . We demonstrate that smSFX can be applied as a general technique for structure determination of beam-sensitive microcrystalline materials at near-ambient temperature and pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Homoepitaxial growth of 9,10-diphenylanthracene

Organic single crystals are often shown to have significantly improved optoelectronic properties over polycrystalline thin films such as exciton diffusivity and carrier mobility. There is growing interest in incorporating such crystals in organic electronics despite a number of challenges. In this work, the homoepitaxial vapor phase growth modes for 9,10-diphenylanthracene (DPA) homoepitaxy are mapped as a function of growth rate and temperature using in situ ultra-low current reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), and atomic force microscopy (AFM). Vapor phase deposition was performed on free-standing single crystal DPA substrates, which show clear Kikuchi patterns. At room temperature, a transition from Frank-Van der Merwe layer-by-layer growth to step-flow growth is observed as the deposition rate is decreased, while at lower temperatures a Stranski-Krastanov layer-plus-island growth is observed. This is the first demonstration of true step-flow growth from room temperature vapor phase deposition for organic semiconductors and is reminiscent of traditional semiconductor growth regimes. Accordingly, these results could lead to improved control over growth and doping of organic single crystals, and lead to enhanced single crystal organic optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unveiling defect-mediated carrier dynamics in monolayer semiconductors by spatiotemporal microwave imaging

The optoelectronic properties of atomically thin transition-metal dichalcogenides are strongly correlated with the presence of defects in the materials, which are not necessarily detrimental for certain applications. For instance, defects can lead to an enhanced photoconduction, a complicated process involving charge generation and recombination in the time domain and carrier transport in the spatial domain. Here, we report the simultaneous spatial and temporal photoconductivity imaging in two types of WS 2 monolayers by laser-illuminated microwave impedance microscopy. The diffusion length and carrier lifetime were directly extracted from the spatial profile and temporal relaxation of microwave signals, respectively. Time-resolved experiments indicate that the critical process for photoexcited carriers is the escape of holes from trap states, which prolongs the apparent lifetime of mobile electrons in the conduction band. As a result, counterintuitively, the long-lived photoconductivity signal is higher in chemical-vapor deposited (CVD) samples than exfoliated monolayers due to the presence of traps that inhibits recombination. Overall, our work reveals the intrinsic time and length scales of electrical response to photoexcitation in van der Waals materials, which is essential for their applications in optoelectronic devices.

42 ENGINEERING↗
DOE OSTI2025

Band Gap Engineering and Metastable Phase Discovery in Cu 2 BaSnS 4– x Se x Nanocrystals via Topotactic Anion Exchange

Earth-abundant multinary inorganic chalcogenides, such as Cu 2 BaSnS 4–x Se x (CBTSSe), have emerged as promising absorbers for next-generation solar cells. However, accessing colloidal CBTSSe nanocrystals, including metastable polymorphs with more favorable optoelectronic properties, remains a critical synthetic challenge. Herein, we report the first use of topotactic anion exchange to access metastable crystal structures in soft chemistry syntheses. By varying the stoichiometry of selenium precursors, we directly synthesize Cu 2 BaSnS 4–x Se x (0 ≤ x ≤ 4) nanocrystals with a broad band gap tunability of 1.51–2.04 eV. At x = 4, a new metastable trigonal phase of Cu 2 BaSnSe 4 is isolated. This phase arises via an in-situ topotactic anion exchange from sulfur-rich Cu 2 BaSnS 4–x Se x intermediates, while retaining both the cation sublattice and overall nanocrystal morphology. The trigonal Cu 2 BaSnSe 4 exhibits a nearly direct band gap that is 280 meV lower than its thermodynamically stable orthorhombic counterpart, aligning more closely with the optimal band gap for single-junction solar cells. In contrast, a post-synthetic anion exchange route leads to the thermodynamically preferred orthorhombic polymorph, pointing to the critical nature of the in-situ transformation. Our findings open a versatile pathway for both polymorphic and morphological control in colloidal nanocrystals, expanding the synthetic design space for new optoelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hybrid Metal Halides: Advancing Optoelectronic Materials (Final Technical Report)

Hybrid metal halides, particularly main group halide perovskites, are a unique class of materials that offer exceptional optoelectronic properties along with a remarkable materials design space. Initial research on this class of materials was driven by the ability of the prototype hybrid 3D perovskite-structured compound methylammonium lead iodide to function as the active layer in thin film solar cells. It is now known that this class of materials comprise a large family with tunable band gaps, relatively high charge carrier mobilities in both single crystal and polycrystalline forms, and relatively low concentrations of (deleterious) electrically active states within the band gap. Beyond applications in solar cells, the potential of these materials has been extended to emitters in light emitting diodes, and active components of radiation detectors. Complementing new functionality, the design space for hybrid metal halides continues to increase with discovery of new structural motifs. In this project, the combination of organic and inorganic functionalities has been employed to open pathways to the design and synthesis new, functional hybrid metal halides. Beyond the simple perovskites, Ruddlesden-Popper and Dion-Jacobsen compounds, and other variants, such as the newly advanced “hollow” perovskites have been studied. The materials have provided routes to understanding the unique electronic properties of hybrid metal halides because of their natural quantum well structures as well as other means of controlling band gaps and band dispersions. Understanding these materials, including the design rules for their formation, their structures and compositions in bulk and in thin films form, and the role of local (non-crystallographic) structure has an important aspect of this endeavor. The goal of advancing new materials and new fundamental understanding within this deceptively simple, yet fascinating class of compounds, so richly endowed with interesting and useful functionality, has been fulfilled.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mechanistic Insight into Tunable Spin Relaxation in Two-Dimensional Type-II Ligand-Perovskite Heterostructures

Two-dimensional (2D) metal-halide perovskites with spin-dependent optical properties hold great promise for spintronic and quantum applications. However, their spin lifetimes, especially for n = 1 2D perovskites, are typically limited to subpicosecond time scales due to rapid spin relaxation driven by strong spin−orbit coupling (SOC), electron−hole exchange interactions, and phonon-mediated scattering. Here, we demonstrate that type-II ligand-perovskite heterostructures overcome these constraints by reducing electron−hole wave function overlap and exciton binding energy. Compared to the type-I 2D perovskite (PEA) 2 PbI 4 with a spin lifetime of 0.29 ps at room temperature, our engineered type-II systems achieve substantially extended spin lifetimes, ∼6.37 ps for (4Tm) 2 PbI 4 and ∼18.47 ps for (4TCNm) 2 PbI 4 . In both materials, spatial charge separation across the perovskite−ligand interface mitigates the Bir−Aronov− Pikus (BAP) mechanism. Temperature- and fluence-dependent measurements reveal Elliott−Yafet (EY)-dominated spin relaxation in (4Tm) 2 PbI 4 , consistent with the observation of coherent phonon oscillation, whereas (4TCNm) 2 PbI 4 exhibits D’yakonov−Perel (DP)-dominated spin relaxation, with weaker phonon coupling further suppressing the EY relaxation, enabling spin lifetimes up to ∼126.81 ps at 5 K. Our findings establish a structural design framework for tailoring spin dynamics in 2D perovskites, offering a promising strategy to engineering spin and optoelectronic properties via rational ligand engineering.

Excitons↗
DOE OSTI2026

First-principles theory of direct-gap optical emission in hexagonal Ge and its enhancement via strain engineering

The emergence of hexagonal Ge (2H-Ge) as a candidate direct-gap group-IV semiconductor for Si photonics mandates a rigorous understanding of its optoelectronic properties. Theoretical predictions of a “pseudodirect” band gap, characterized by weak oscillator strength, contrast with a claimed high radiative recombination coefficient 𝐵 comparable to conventional (cubic) InAs. We compute 𝐵 in 2H-Ge from first principles and quantify its dependence on temperature, carrier density, and strain. For unstrained 2H-Ge, our calculated spontaneous emission spectra corroborate that measured photoluminescence corresponds to direct-gap emission, but with 𝐵 being approximately three orders of magnitude lower than in InAs. We confirm a pseudodirect-to-direct-gap transition under ∼2% [0001] uniaxial tension, which can enhance 𝐵 by up to 3 orders of magnitude, making it comparable to that of InAs. Beyond quantifying the strong enhancement of 𝐵 via strain engineering, our analysis suggests the dominance of additional, as-yet unquantified recombination mechanisms in this nascent material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Identifying Photoinduced Dipolar Polarization and Orbit–Orbit Interaction between Excitons in Organic–Inorganic Hybrid Perovskites

Abstract Photoinduced polarization and orbit–orbit interaction are important issues in hybrid perovskites toward developing optoelectronic functionalities. This paper identifies that photoinduced polarization occurs in hybrid perovskites with mixed‐cation methylammonium (MA)/formamidinium (FA) (MA x FA (1− x ) PbI 3 ) by measuring bulk polarization at 1 MHz in a magnetic field. Interestingly, when the internal dipole moment is increased upon increasing the MA:FA ratio, the photoinduced dipolar polarization can be substantially enhanced, clarifying the controversial issue of whether photoexcitation can induce a dielectric polarization within dipolar polarization regime in hybrid perovskites. Furthermore, upon increasing photoinduced dipolar polarization, it is found that the intrinsic orbit–orbit interaction between excitons can be increased, revealed by monitoring photocurrent change (Δ J sc ) upon switching the photoexcitation between linear and circular polarizations. This presents that organic cations are directly involved in the orbit–orbit interaction within band structures. Clearly, the studies provide an insightful understanding of the dipole moment effects on photoinduced dipolar polarization and orbit–orbit interaction between excitons in hybrid perovskites toward controlling the optoelectronic properties.

Dou, Yixuan↗
DOE OSTI2021

CsPbI 3 Nanocrystals Go with the Flow: From Formation Mechanism to Continuous Nanomanufacturing

Despite the groundbreaking advancements in the synthesis of inorganic lead halide perovskite (LHP) nanocrystals (NCs), stimulated from their intriguing size-, composition-, and morphology-dependent optical and optoelectronic properties, their formation mechanism through the hot-injection (HI) synthetic route is not well-understood. Here in this work, for the first time, in-flow HI synthesis of cesium lead iodide (CsPbI 3 ) NCs is introduced and a comprehensive understanding of the interdependent competing reaction parameters controlling the NC morphology (nanocube vs nanoplatelet) and properties is provided. Utilizing the developed flow synthesis strategy, a change in the CsPbI 3 NC formation mechanism at temperatures higher than 150 °C, resulting in different CsPbI 3 morphologies is revealed. Through comparison of the flow- versus flask-based synthesis, deficiencies of batch reactors in reproducible and scalable synthesis of CsPbI 3 NCs with fast formation kinetics are demonstrated. The developed modular flow chemistry route provides a new frontier for high-temperature studies of solution-processed LHP NCs and enables their consistent and reliable continuous nanomanufacturing for next-generation energy technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Surface Trap Dynamics and Gamma‐Ray Detection Enhancement in Passivated FAPbBr 3 Perovskite Crystals

Perovskite‐based direct radiation detectors offer a compelling platform for room‐temperature gamma spectroscopy due to their high sensitivity, tunable optoelectronic properties, and compatibility with solution processing. While prior studies on formamidinium lead tribromide (FAPbBr 3 ) have shown that surface passivation mitigates deep trap state impact on the charge collection efficiency (CCE), the influence of surface‐based shallow traps on time‐resolved detector response remains largely unexplored. In this article, a digital signal processing (DSP) method is applied to analyze waveform rising edge dynamics in FAPbBr 3 single‐crystal detectors, identifying prompt and delayed charge collection components. Using the second derivative of the collected charge signal, the onset of shallow trap reemission is isolated, occurring 1.1 µs after carrier generation. Surface passivation suppressed deep trap states, shifting carrier occupancy toward shallower traps and extending the temporal window of delayed charge collection. This delayed contribution correlates with measurable changes in the temporal and amplitude distributions of detector events. By leveraging time‐domain filtering informed by these dynamics, a selective enhancement in signal quality and gamma peak‐to‐Compton ratio (PCR) is achieved, while preserving over 90% of photoelectric events. An improvement in the PCR to 1.80, from the original 1.09, is enabled by focusing on high collection efficiency events corresponding to reemitted carriers in the 1.1 to 3 µs range after the generation event. These results demonstrate a pathway for leveraging shallow trap dynamics to enhance spectral fidelity in time‐resolved perovskite detectors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Blading Phase–Pure Formamidinium–Alloyed Perovskites for High–Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

Currently, blade-coated perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs), i.e. greater than 20%, normally employ methylammonium lead tri-iodide with a sub-optimal bandgap. Alloyed perovskites with formamidinium (FA) cation have narrower bandgap and thus enhance device photocurrent. However, FA-alloyed perovskites show low phase stability and high moisture sensitivity. Here, we report that incorporating 0.83 molar percent organic halide salts (OHs) into the perovskite inks enables phase-pure, highly crystalline FA-alloyed perovskites with extraordinary optoelectronic properties. Here, the OH molecules modulate the crystal growth, enhance the phase stability, passivate ionic defects at the surface and/or grain boundaries, and enhance the moisture stability of the perovskite film. We demonstrate a high efficiency of 22.0% under 1 sun illumination for blade-coated PSCs with an open-circuit voltage of 1.18 V, corresponding to a very small voltage deficit of 0.33 V, and significantly improved operational stability with 96% of the initial efficiency retained under one sun illumination for 500 hours.

14 SOLAR ENERGY↗
DOE OSTI2020

Choose Your Own Adventure: Fabrication of Monolithic All-Perovskite Tandem Photovoltaics

Metal halide perovskites (MHPs) have transfixed the photovoltaic (PV) community due to their outstanding and tunable optoelectronic properties coupled to demonstrations of high-power conversion efficiencies (PCE) at a range of bandgaps. This has motivated the field to push perovskites to reach the highest possible performance. One way to increase the efficiency is by fabricating multijunction solar cells, which can split the solar spectrum, reducing thermalization loss. Low-cost all-perovskite tandems have a real chance to soon exceed 30% PCE, which could transform the PV industry. Achieving this goal requires the identification of perovskite sub-cells that are both highly efficient and can be effectively integrated. In this review, it is discussed how to navigate the multiple-choice adventure in choosing between the myriad of options and considerations present when deciding what perovskite materials, contact layers, and processing tools to use. Some of the potential fabrication pitfalls often encountered in MHP based tandem PVs are highlighted, so that they can hopefully be avoided in the future.

14 SOLAR ENERGY↗