SEARCH · Engineering Papers
Results for “optimized”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Optimized Performance and Cost Potential for Indirect Supercritical CO2 Coal Fired Power Plants
This presentation given at the 2021 ASME Turbo Expo (GT2021-58865) summarizes the techno-economic global optimization results of coal-fired utility scale power plants based on indirect sCO2 power cycles with and without carbon capture and storage (CCS).
Readout optimization of multi-amplifier sensing charge-coupled devices for single-quantum measurement
The non-destructive readout capability of the Skipper Charge Coupled Device (CCD) has been demonstrated to reduce the noise limitation of conventional silicon devices to levels that allow single-photon or single-electron counting. The noise reduction is achieved by taking multiple measurements of the charge in each pixel. These multiple measurements come at the cost of extra readout time, which has been a limitation for the broader adoption of this technology in particle physics, quantum imaging, and astronomy applications. This work presents recent results of a novel sensor architecture that uses multiple non-destructive floating-gate amplifiers in series to achieve sub-electron readout noise in a thick, fully-depleted silicon detector to overcome the readout time overhead of the Skipper-CCD. This sensor is called the Multiple-Amplifier Sensing Charge-Coupled Device (MAS-CCD) can perform multiple independent charge measurements with each amplifier, and the measurements from multiple amplifiers can be combined to further reduce the readout noise. We will show results obtained for sensors with 8 and 16 amplifiers per readout stage in new readout operations modes to optimize its readout speed. The noise reduction capability of the new techniques will be demonstrated in terms of its ability to reduce the noise by combining the information from the different amplifiers, and to resolve signals in the order of a single photon per pixel. The first readout operation explored here avoids the extra readout time needed in the MAS-CCD to read a line of the sensor associated with the extra extent of the serial register. The second technique explore the capability of the MAS-CCD device to perform a region of interest readout increasing the number of multiple samples per amplifier in a targeted region of the active area of the device.
Communication Lower Bounds and Optimal Algorithms for Multiple Tensor-Times-Matrix Computation
Multiple tensor-times-matrix (Multi-TTM) is a key computation in algorithms for computing and operating with the Tucker tensor decomposition, which is frequently used in multidimensional data analysis. Here, we establish communication lower bounds that determine how much data movement is required (under mild conditions) to perform the Multi-TTM computation in parallel. The crux of the proof relies on analytically solving a constrained, nonlinear optimization problem. We also present a parallel algorithm to perform this computation that organizes the processors into a logical grid with twice as many modes as the input tensor. We show that, with correct choices of grid dimensions, the communication cost of the algorithm attains the lower bounds and is therefore communication optimal. Finally, we show that our algorithm can significantly reduce communication compared to the straightforward approach of expressing the computation as a sequence of tensor-times-matrix operations when the input and output tensors vary greatly in size.
BOOTS: Bayesian Optimization for Optimal Test Selection
BOOTS is a package for optimal selection of candidate operating points in large-scale manufacturing applications. It is designed to optimally select operating points to maximize predicted values of product quality and resource efficiency according to a data-driven model. The package is based on the use of a multi-input multi-output (MIMO) Gaussian process model to describe the relationships between inputs (operating points) and outputs (product quality and resource efficiency). This package does not provide any site- or process-specific information.
Cycle-to-cycle variability in spark-assisted compression ignition engines near optimal mean combustion phasing
Stoichiometric spark-assisted compression ignition (SACI) combustion with exhaust gas recirculation (EGR) dilution has demonstrated higher part-load thermal efficiencies compared to spark-ignited engines, while maintaining ultra-low tailpipe emissions. However, SACI is often characterized by high cyclic variability in heat release or torque output, which poses a challenge to its implementation in light-duty vehicles. This paper presents an experimental investigation of cyclic variability in stoichiometric SACI combustion under EGR-dilute conditions, while maintaining mean combustion phasing (θ 50 ) near optimal timing for thermal efficiency. The present work focuses on SACI conditions where the flame-based heat release fraction is between approximately 10% and 40% of the overall heat release, and therefore contributes significantly to the combustion process. For the SACI conditions examined, the variability in θ 50 was driven by variability in autoignition timing, which in turn correlated with the start of measurable heat release (θ 02 ). High variability in θ 50 caused unstable work output due to very late combustion with poor or no end-gas autoignition. The use of a high ignition energy dual-coil offset ignition system had negligible impact in reducing θ 50 variability. Analysis of experimental data from close to 1000 operating conditions showed that the magnitude of θ 50 variability correlates with the flame-based heat release fraction ([Formula: see text]), for a large range of intake pressures, spark timings and exhaust gas recirculation levels. For the SACI conditions examined, combustion phasing variability was largely determined by flame-based combustion and particularly the initial flame formation (θ IGN-02 ), and minimally by the end-gas autoignition heat release. The analysis also demonstrated that θ 50 variability is amplified as the contribution of the flame to the overall heat release increases.
Data for Optimization of Pre-Commercial Enzymes Dosage for a Potential Lignocellulosic Biorefinery
Lignocellulolytic enzymes remain one of the primary cost constraints in second-generation (2G) ethanol biorefineries. Achieving efficient hydrolysis of structural carbohydrates with minimal enzyme dosage, maintaining slurry fermentability for industrially relevant ethanol titers, and maximizing ethanol yield per ton of biomass are among the major challenges in 2G processes. In this study, we optimized the dosages of pre-commercial cellulase (NS22257) and hemicellulase (NS22244) on pilot-scale, hydrothermally pretreated lignocellulosic substrates. Enzyme dosages were evaluated at three levels: 20 mg of cellulase with 7.25 mg of hemicellulase (ED-1), 40 mg with 14.5 mg (ED-2), and 60 mg with 21.75 mg (ED-3). As expected, the highest sugar yields were obtained with ED-3; however, for sweet sorghum, oilcane, and miscanthus, sugar yields from ED-2 and ED-3 were not significantly different (p < 0.05). For example, sweet sorghum produced 123.78 ± 1.54 g L−1 and 125.76 ± 0.46 g L−1 of total sugars (glucose and xylose) with ED-2 and ED-3, respectively. Although energycane exhibited a statistically significant difference between ED-2 and ED-3, the incremental gain with ED-3 was modest, increasing sugar release by only 9.02 g L−1 relative to ED-2. Importantly, ED-1 resulted in sugar yields of 88.88 ± 3.64 to 106.86 ± 1.21 g L−1, sufficient to achieve ethanol titers ≥40 g L−1, the threshold required for industrial relevance. A semi-integrated bioprocess validated this outcome, producing 42.09 ± 2.38 g L−1 ethanol and an estimated yield of 213.38 L of ethanol per dry ton of pretreated biomass, requiring only 20.83 L of cellulase and 6.25 L of hemicellulase per ton. Remarkably, these enzyme dosages were approximately tenfold lower than those reported in prior studies.
Challenges and Optimization of Mu2e Proton Target Design with Radiative Cooling
Mu2e, the Muon-to-Electron Conversion Experiment, aims to identify physics beyond the Standard Model, namely, the conversion of muons to electrons without the emission of neutrinos. The muons are produced from pions generated in a production target when it is hit by an 8 GeV proton beam from the Fermilab Booster/Main Injector. The proton target design space is strongly constrained by a one-year operating lifetime and the need for radiative cooling in a vacuum environment. Uncertainties in the lifetime of the existing baseline design – a monolithic, segmented tungsten target – are large, particularly due to unknown impacts of radiation damage at the very high proton fluences expected in the experiment. We have begun evaluation of a new design utilizing Inconel 718 over the WL10 used in the existing target design. As a result, the structural design of the target has evolved significantly. This evolution focuses on lowering the target temperature, minimizing obstruction to muons, increasing structural stability, maximizing fatigue lifetime, simplifying the fabrication process, and more. The thermal management, structural stability and fatigue lifetime are emphasized here. These optimizations have led to a promising new target design for the Mu2e experiment.
A descriptive model for determining optimal human performance in systems. Volume 3 - An approach for determining the optimal role of man and allocation of functions in an aerospace system
Optimal role of man in space, allocation of men and machines in aerospace systems, and descriptive model for determining optimal human performance
Second order conditions of optimality for constrained optimization problems in finite dimensional spaces
Conditions of optimality for constrained optimization problem
Analytic solution for optimal two-impulse 180 deg transfer between noncoplanar orbits and the optimal orientation of the transfer plane.
Optimal two impulse transfer through 180 degree range angle between Keplerian noncoplanar orbits, minimizing impulse by transfer plane optimal orientation
On the equivalence of optimal control problems and the transformation of optimal control problems with compact control regions into Lagrange problems
Equivalence of optimal control problems and transformation of optimal control problems with compact control regions into Lagrange problems
Analytic solution for optimal two-impulse 180 deg transfer between noncoplanar orbits and the optimal orientation of the transfer plane
Optimal two impulse transfer through 180 degree range angle between Keplerian noncoplanar orbits, minimizing impulse by transfer plane optimal orientation
Optimal shuttle trajectory - Vehicle design using parameter optimization
Space shuttle optimal design problem, applying accelerated gradient parameter optimization technique
The synthesis of optimal controls for linear, time-optimal problems with retarded controls.
Optimization problems involving linear systems with retardations in the controls are studied in a systematic way. Some physical motivation for the problems is discussed. The topics covered are: controllability, existence and uniqueness of the optimal control, sufficient conditions, techniques of synthesis, and dynamic programming. A number of solved examples are presented.
Optimization of multi-constrained structures based on optimality criteria
A weight-reduction algorithm is developed for the optimal design of structures subject to several multibehavioral inequality constraints. The structural weight is considered to depend linearly on the design variables. The algorithm incorporates a simple recursion formula derived from the Kuhn-Tucker necessary conditions for optimality, associated with a procedure to delete nonactive constraints based on the Gauss-Seidel iterative method for linear systems. A number of example problems is studied, including typical truss structures and simplified wings subject to static loads and with constraints imposed on stresses and displacements. For one of the latter structures, constraints on the fundamental natural frequency and flutter speed are also imposed. The results obtained show that the method is fast, efficient, and general when compared to other competing techniques. Extensions to the generality of the method to include equality constraints and nonlinear merit functions is discussed.
Investigation, development and application of optimal output feedback theory. Volume 2: Development of an optimal, limited state feedback outer-loop digital flight control system for 3-D terminal area operation
This report contains the development of a digital outer-loop three dimensional radio navigation (3-D RNAV) flight control system for a small commercial jet transport. The outer-loop control system is designed using optimal stochastic limited state feedback techniques. Options investigated using the optimal limited state feedback approach include integrated versus hierarchical control loop designs, 20 samples per second versus 5 samples per second outer-loop operation and alternative Type 1 integration command errors. Command generator tracking techniques used in the digital control design enable the jet transport to automatically track arbitrary curved flight paths generated by waypoints. The performance of the design is demonstrated using detailed nonlinear aircraft simulations in the terminal area, frequency domain multi-input sigma plots, frequency domain single-input Bode plots and closed-loop poles. The response of the system to a severe wind shear during a landing approach is also presented.
Structural optimization by generalized, multilevel optimization
In the present development history for both a general multilevel optimization capability and a three-level structural optimization, which is taken to be qualitatively equivalent to a multilevel implementation, a structure is partitioned into a number of substructuring levels where each substructure corresponds to a subsystem. The method is illustrated by a portal framework that decomposes into individual beams, each of which is a box that can be further decomposed into stiffened plates. Substructuring therefore spans three different levels. Since further extensions would only add to the intermediate substructuring levels, the three-level case is qualitatively complete.