Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitridation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Selective semihydrogenation of acetylene in ethylene using defect-rich boron nitride catalyst from flux reconstruction

Efficient removal of trace acetylene from ethylene streams is essential for producing polymer-grade ethylene, yet achieving highly selective semihydrogenation without over-hydrogenation remains a long-standing challenge. A key barrier is the lack of a simple, low-cost catalyst that can activate hydrogen effectively while preventing ethylene from reacting further. Here we show that defect-rich boron nitride, prepared through a straightforward flux reconstruction method, serves as a highly selective and metal-free catalyst for acetylene semihydrogenation. The catalyst contains abundant open boron and nitrogen sites that enable efficient hydrogen activation and rapid release of ethylene, thereby avoiding over-hydrogenation. Experiments combined with isotope labeling and theoretical analysis reveal that these defects lower the energy barrier for hydrogen activation while accelerating product desorption. Our findings demonstrate a scalable strategy for defect engineering in boron nitride and highlight its potential as a robust, sustainable alternative to metal-based catalysts in industrial ethylene purification.

Wang, Tao [Oak Ridge National Laboratory (ORNL), O↗
DOE OSTI2022

Tuning colour centres at a twisted hexagonal boron nitride interface

The colour centre platform holds promise for quantum technologies, and hexagonal boron nitride has attracted attention due to the high brightness and stability, optically addressable spin states and wide wavelength coverage discovered in its emitters. However, its application is hindered by the typically random defect distribution and complex mesoscopic environment. In this study, employing cathodoluminescence, we demonstrate on-demand activation and control of colour centre emission at the twisted interface of two hexagonal boron nitride flakes. Further, we show that colour centre emission brightness can be enhanced by two orders of magnitude by tuning the twist angle. Additionally, by applying an external voltage, nearly 100% brightness modulation is achieved. Our ab initio GW and GW plus Bethe–Salpeter equation calculations suggest that the emission is correlated to nitrogen vacancies and that a twist-induced moiré potential facilitates electron–hole recombination. This mechanism is further exploited to draw nanoscale colour centre patterns using electron beams.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ammonia synthesis by photocatalytic hydrogenation of a N 2 -derived molybdenum nitride

Although metal complexes are known to split dinitrogen at ambient temperature and pressure, the synthesis of ammonia from these compounds and using H 2 as the terminal reductant has been rarely achieved. Here, we report photocatalytic ammonia synthesis from a N 2 -derived terminal molybdenum nitride and by using H 2 as the terminal reductant. An iridium hydride photocatalyst mediates the reaction upon irradiation with blue light. A molybdenum pentahydride was identified as the principal metal product arising following ammonia release. Conversion of the molybdenum pentahydride back to the terminal molybdenum nitride was accomplished in three-steps and completes a synthetic cycle for NH3 formation from N 2 and H 2 . Mechanistic investigations support a pathway involving photoexcitation of the iridium hydride and subsequent energy transfer rather than electron transfer. Deuterium labelling confirmed H 2 as the source of the N–H bonds. This photodriven, proton coupled electron transfer allows the use of H 2 as the terminal reductant for catalytic formation of NH 3 from N 2 using metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Oxidative dehydrogenation of propane on the oxygen adsorbed edges of boron nitride nanoribbons

Metal-free boron nitride has recently been reported to exhibit high catalytic activity and selectivity towards oxidative dehydrogenation of propane (ODHP). Despite several experimental studies, the exact nature and function of the active sites in this emerging catalyst are unknown. In the present work, density functional theory calculations are combined with microkinetic modeling to systematically explore the ODHP on oxygen passivated boron nitride nanoribbons (BNNRs). Here, the relative stabilities of different edge structures of BNNR were examined using ab initio thermodynamic analysis, and the most stable oxygen passivated edge structure was used for a mechanistic study. Microkinetic analysis revealed that a N 2 O or NO x -type active site is active and selective for the conversion of propane to propene. In addition to a heterogeneous catalytic cycle, the proposed N 2 O/NO x -type active sites are expected to be able to generate gas phase C 3 H 7 ˙, which in turn can trigger gas phase reactions of ODHP as experimentally speculated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photothermal behaviour of titanium nitride nanoparticles evaluated by transient X-ray diffraction

The photothermal properties of metal nitrides have recently received significant attention owing to diverse applications in solar energy conversion, photothermal therapies, photoreactions, and thermochromic windows. Here, the photothermal response of titanium nitride nanoparticles is examined using transient X-ray diffraction, in which optical excitation is synchronized with X-ray pulses to characterize dynamic changes in the TiN lattice. Photoinduced diffraction data is quantitatively analyzed to determine increases in the TiN lattice spacing, which are furthermore calibrated against static, temperature-dependent diffraction patterns of the same samples. Measurements of 20 nm and 50 nm diameter TiN nanoparticles reveal transient lattice heating from room temperature up to similar to 175 degrees C for the highest pump fluences investigated here. Increasing excitation intensity drives sublinear increases in lattice temperature, due to increased heat capacity at the higher effective temperatures achieved at higher powers. Temporal dynamics show that higher excitation intensity drives not only higher lattice temperatures, but also unexpectedly slower cooling of the TiN nanoparticles, which is attributed to heating of the solvent proximal to the nanoparticle surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Platinum-complexed phosphorous-doped carbon nitride for electrocatalytic hydrogen evolution

Sustainable hydrogen gas production is critical for future fuel infrastructure. Here, a series of phosphorous-doped carbon nitride materials were synthesized by thermal annealing of urea and ammonium hexafluorophosphate, and platinum was atomically dispersed within the structural scaffold by thermal refluxing with Zeise's salt forming Pt–N/P/Cl coordination interactions, as manifested in X-ray photoelectron and absorption spectroscopic measurements. The resulting materials were found to exhibit markedly enhanced electrocatalytic activity towards the hydrogen evolution reaction (HER) in acidic media, as compared to the P-free counterpart. This was accounted for by P doping that led to a significantly improved charge carrier density within C 3 N 4 , and the sample with the optimal P content showed an overpotential of only –22 mV to reach the current density of 10 mA cm –2 , lower than that of commercial Pt/C (–26 mV), and a mass activity (7.1 mA μg –1 Pt at –70 mV vs. reversible hydrogen electrode) nearly triple that of the latter. Finally, results from the present study highlight the significance of P doping in the manipulation of the electronic structures of metal/carbon nitride nanocomposites for high-performance HER electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Optimizing dicyandiamide pretreatment conditions for enhanced structure and electronic properties of polymeric graphitic carbon nitride

Graphitic carbon nitride, a polymeric semiconductor, possesses a distinctive electronic band structure and exceptional chemical stability, making it a highly promising material for various catalytic applications such as electrocatalysis, photocatalysis, and photo-electrocatalysis. However, its practical applications remain limited due to its low active site density and poor electrical conductivity. In this study, to overcome such limitations, we have conducted a thorough investigation to explore the impact of dicyandiamide (DCDA) precursor pretreatment prior to thermal polymerization to graphitic carbon nitride. The DCDA precursor was subjected to various pretreatment methods including grinding using mortar and pestle, recrystallization through stirring or probe sonication after dissolving in deionized water, and freeze drying, prior to thermal polymerization at 550 °C for 2 hours. The structural and morphological properties of the catalysts prepared were compared and characterized by X-ray diffraction (XRD), attenuated total reflectance–Fourier transform infrared (ATR-IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis while the electronic band gap properties were determined based on density functional theory (DFT) calculations for a set of crystalline systems having C/N ratios similar to those identified experimentally. In comparison to direct thermal polymerization, pretreated samples rendered the same product yield, diverse morphologies with flat or wrinkle structures, and reduced electrochemical resistance, making them suitable for use in various catalytic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Titanium surface nitriding by sodium amide in molten salts

A crystalline titanium nitride (TiN) layer on titanium foil is achieved using sodium amide (NaNH 2 ) as a nitrogen source in LiCl–KCl molten salts. Nanoindentation testing revealed exceptional mechanical properties, with the nitrided surface achieving a hardness of approximately 20.6 GPa, representing more than a four-fold increase compared to the untreated titanium substrate.

Wang, Tao [Oak Ridge National Laboratory (ORNL), O↗
DOE OSTI2025

Deterministic fabrication of highly reproducible monochromatic quantum emitters in hexagonal boron nitride

Quantum emitters in hexagonal boron nitride are important room temperature single-photon sources. However, conventional fabrication methods yield quantum emitters with dispersed and inconsistent spectral profiles, limiting their potential for practical quantum applications, which demand reproducible high quality single-photon sources. Here, we report the deterministic creation of highly reproducible monochromatic quantum emitters by applying carbon-ion implantation on freestanding hexagonal boron nitride flakes, while a carbon mask with suitable thickness was adapted to optimize the implantation results. Quantum emitters fabricated using this approach exhibited thermally limited monochromaticity, with an emission center wavelength of 590.7 ± 2.7 nm, a narrow full width at half maximum of 7.1 ± 1.7 nm, an emission rate of 1 MHz without optical engineering, and exceptional stability under ambient conditions. Density functional theory calculations and scanning transmission electron microscopy suggest that these emitters are comprised of boron centered carbon tetramers. This method provides a reliable single-photon source for optical quantum computing and potential future industry-scale applications.

Hua, Muchuan [Argonne National Laboratory (ANL), A↗
DOE OSTI2020

Controlling surface adatom kinetics for improved structural and optical properties of high indium content aluminum indium nitride

A non-traditional, for AlInN, method of controlling adatom kinetics and a low temperature growth condition were employed to improve the quality of high indium content aluminum indium nitride films. Metal-rich surfaces were used to enhance adatom mobility and compensate for the low growth temperature (Tsub ≤ 400 °C) effect of reducing surface diffusion lengths. The metal-rich approach resulted in 12 times lower x-ray diffraction full-width at half-maximum rocking curve figures of merit when compared to literature. In addition to promising photoluminescence emission, these results indicate improved structural quality over other reported approaches. AlInN films with ∼70% indium content were characterized via x-ray diffraction, atomic force microscopy, and photoluminescence spectroscopy with each technique indicating an optimal growth temperature of 350 °C. Al0.3In0.7N grown above 400 °C exhibited phase separation and a reduction in quality, while samples grown colder were predominantly single-phase and displayed improved photoluminescence at ∼1.45 eV. The photoluminescence spectra suggest emission from quantum wire-like structures with dimensions ranging from 15 to 18 nm. These low-temperature, metal-rich findings for high indium content AlInN are promising for future long-wavelength III-nitride optical devices.

Engel, Zachary (ORCID:0000000205021981)↗
DOE OSTI2020

Low-loss superconducting titanium nitride grown using plasma-assisted molecular beam epitaxy

Titanium nitride (TiN) is a known superconducting material that is attractive for use as passive components in superconducting circuits for both conventional and quantum information devices. In contrast to conventional synthesis techniques, here, plasma-assisted molecular beam epitaxy is reported to produce high-quality TiN on bare silicon wafers. Using a rf-plasma source to crack the nitrogen molecules and a conventional high-temperature effusion cell for titanium, TiN growth is completed under nitrogen-rich conditions. The growth and nucleation is monitored in situ, while the structure and composition are characterized using x-ray diffraction, atomic force microscopy, x-ray photoelectron spectroscopy, secondary ion mass spectroscopy, and scanning transmission electron microscopy. The stoichiometric TiN (111) films sit on an amorphous nitride layer with low impurity concentrations. The films superconduct with Tc=5.4 K, and coplanar waveguide resonators are fabricated with a small center width of 6 μm that demonstrate single-photon quality factors approaching 1M and high-power quality factors over 5M without observing saturation.

Richardson, C. J. K. (ORCID:0000000188175347)↗
DOE OSTI2023

Nucleation of cubic boron nitride on boron-doped diamond via plasma enhanced chemical vapor deposition

Cubic boron nitride (c-BN), with a small 1.4% lattice mismatch with diamond, presents a heterostructure with multiple opportunities for electronic device applications. However, the formation of c-BN/diamond heterostructures has been limited by the tendency to form hexagonal BN at the interface. In this study, c-BN has been deposited on free standing polycrystalline and single crystal boron-doped diamond substrates via electron cyclotron resonance plasma enhanced chemical vapor deposition (ECR-PECVD), employing fluorine chemistry. In situ x-ray photoelectron spectroscopy (XPS) is used to characterize the nucleation and growth of boron nitride (BN) films as a function of hydrogen gas flow rates during deposition. The PECVD growth rate of BN was found to increase with increased hydrogen gas flow. In the absence of hydrogen gas flow, the BN layer was reduced in thickness or etched. The XPS results show that an excess of hydrogen gas significantly increases the percent of sp2 bonding, characteristic of hexagonal BN (h-BN), particularly during initial layer growth. Reducing the hydrogen flow, such that hydrogen gas is the limiting reactant, minimizes the sp2 bonding during the nucleation of BN. TEM results indicate the partial coverage of the diamond with thin epitaxial islands of c-BN. The limited hydrogen reaction is found to be a favorable growth environment for c-BN on boron-doped diamond.

Physics↗
DOE OSTI2025

Diffusion coefficients predicting facet-dependent crystallization in amorphous silicon nitride

Amorphous silicon nitride is a common material in microelectronics devices, which acts as an insulating barrier. Extended annealing times at elevated temperature can initiate crystallization of α-Si 3 ⁢ N 4 , which does not possess the same barrier properties. Molecular dynamics can resolve the fundamental mechanism for α-Si 3 ⁢N 4 crystallization and the influence of local environments. Here, we compare two interatomic potentials and conclude that these models predict structural features (e.g., angular distributions and densities) which span the range of experimental measurements. We confirmed these models reproduce experimental estimates of activation energy and leveraged these models to identify crystallization drivers. We conclude that near-T g , facet-dependent silicon nitride crystal growth rates can be predicted directly by either bulk or interfacial diffusion properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Room-Temperature Ferromagnetism at an Oxide-Nitride Interface

Heterointerfaces have led to the discovery of novel electronic and magnetic states because of their strongly entangled electronic degrees of freedom. Single-phase chromium compounds always exhibit antiferromagnetism following the prediction of the Goodenough-Kanamori rules. So far, exchange coupling between chromium ions via heteroanions has not been explored and the associated quantum states are unknown. In this work, we report the successful epitaxial synthesis and characterization of chromium oxide (Cr 2 O 3 )-chromium nitride (CrN) superlattices. Room-temperature ferromagnetic spin ordering is achieved at the interfaces between these two antiferromagnets, and the magnitude of the effect decays with increasing layer thickness. First-principles calculations indicate that robust ferromagnetic spin interaction between Cr 3+ ions via anion-hybridization across the interface yields the lowest total energy. This work opens the door to fundamental understanding of the unexpected and exceptional properties of oxide-nitride interfaces and provides access to hidden phases at low-dimensional quantum heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Broadband titanium nitride disordered metasurface absorbers

We experimentally demonstrate titanium nitride (TiN) broadband metasurface perfect absorbers by conformally coating plasmonic TiN films onto disordered anodic aluminum oxide (AAO) nanotemplates. The disordered metasurface absorbers exhibit polarization-insensitive and weak angle-dependent perfect absorption over the entire visible and near-infrared spectral regions (300 < λ < 2500 nm). We show from experimental results and numerical simulations that the light scattering induced by the strong disorder of the AAO nanopores and the strong absorption of the TiN deposited on their sidewall are of critical importance for achieving broadband perfect absorption. The TiN disordered metasurface perfect absorbers are superior to many other types of broadband perfect absorbers previously reported and are more suitable for practical applications especially in harsh environments. The device concept for broadband perfect absorption based on plasmonic metal-nitride film coated disordered dielectric media could potentially be extended to significantly enhance the efficiency of solar energy harvesting and the performance of hot-carrier based optoelectronics.

Chang, Chun-Chieh (ORCID:0000000337282454)↗
DOE OSTI2022

Determination of the nonlinear thermo-optic coefficient of silicon nitride and oxide using an effective index method

There is little literature characterizing the temperature-dependent thermo-optic coefficient (TOC) for low pressure chemical vapor deposition (LPCVD) silicon nitride or plasma enhanced chemical vapor deposition (PECVD) silicon dioxide at temperatures above 300 K. In this study, we characterize these material TOC’s from approximately 300-460 K, yielding values of (2.51 ± 0.08) · 10 −5 K −1 for silicon nitride and (5.67 ± 0.53) · 10 −6 K −1 for silicon oxide at room temperature (300 K). We use a simplified experimental setup and apply an analytical technique to account for thermal expansion during the extraction process. We also show that the waveguide geometry and method used to determine the resonant wavelength have a substantial impact on the precision of our results, a fact which can be used to improve the precision of numerous ring resonator index sensing experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Efficient and compact thermo-optic phase shifter in silicon-rich silicon nitride

The design, fabrication, and characterization of low-loss ultra-compact bends in high-index (${n} = {3.1}$ at $\lambda = {1550}\;{\rm nm}$) plasma-enhanced chemical vapor deposition silicon-rich silicon nitride (SRN) were demonstrated and utilized to realize efficient, small footprint thermo-optic phase shifter. Compact bends were structured into a folded waveguide geometry to form a rectangular spiral within an area of ${65} \times {65}\;\unicode{x00B5}{{\rm m}^2}$, having a total active waveguide length of 1.2 mm. The device featured a phase-shifting efficiency of $8\;{\rm mW}/\pi$ and a 3 dB switching bandwidth of 15 KHz. Here, we propose SRN as a promising thermo-optic platform that combines the properties of silicon and stoichiometric silicon nitride.

Nejadriahi, Hani↗