Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “module temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Program to design, fabricate, test, and deliver a thermal control-mixing control device for the George C. Marshall Space Flight Center

The development and testing of a temperature sensor and pulse duration modulation (PDM) diverter valve for a thermal control-mixing control device are described. The temperature sensor selected for use uses a fluidic pin amplifier in conjunction with an expansion device. This device can sense changes of less than 0.25 F with greater than 15:1 signal to noise ratio when operating with a typical Freon pump supplied pressure. The pressure sensitivity of the sensor is approximately 0.0019 F/kPa. The valve which was selected was tested and performed with 100% flow diversion. In addition, the valve operates with a flow efficiency of at least 95%, with the possibility of attaining 100% if the vent flow of the PDM can be channeled through the last stage of the diverter valve. A temperature sensor which utilized an orifice bridge circuit and proportional-vortex combination mixing valve were also evaluated, but the concepts were rejected due to various problems.

Thurston, T. S.↗
NASA NTRS1981

Combined photovoltaic and thermal-storage module

Module uses phase change heat absorbing wax to reduce peak temperatures, increasing electrical efficiency. Wax makes module more cost effective than conventional thermomodules by also storing thermal energy for air and water heating.

Stultz, J. W.↗
NASA NTRS1987

An earth outgoing longwave radiation climate model. I - Clear sky radiation

An earth outgoing longwave radiation (OLWR) climate model is presented. The model uses the upward radiative transfer parameterization of Thompson and Warren (1982) for radiation calculations, and a climatologic dataset from Crutcher and Meserve (1970) and Taljaard et al. (1969) to provide data on temperature, dewpoint, and geopotential height for various altitudes. Using the model for a monthly average radiation budget study, clear sky cases of OLWR were calculated for the global average, zonal averages, and global distributions. The regional results on North and South America were compared with GOES data and were found to agree well. The clear sky case shows that the OLWR field is highly modulated by water vapor, especially in the tropics, where the strongest longitudinal variations in OLWR occur. In the high latitudes, where cold air contains less water vapor, OLWR is basically modulated by the surface temperature.

Yang, Shi-Keng↗
NASA NTRS1989

Thermal enclosures for electronically scanned pressure modules operating in cryogenic environments

Specific guidelines to design, construct, and test ESP thermal enclosures for applications at cryogenic temperatures are given. The enclosures maintain the ESP modules at a constant temperature (10 C plus or minus 1 C) to minimize thermal zero and sensitivity shifts, to minimize the frequency of expensive on-line calibrations, and to avoid adverse effects on tunnel and model boundary layers. The enclosures are constructed of a rigid closed-cell foam and are capable of withstanding the stagnation pressures to 932kPa (135 psia) without reduction in thermal insulation properties. This construction procedure has been used to construct several thermal packages which have been successfully used in National Transonic Facility.

Mitchell, Michael↗
NASA NTRS1984

Electronically-Scanned Pressure Sensors

Sensors not pneumatically switched. Electronic pressure-transducer scanning system constructed in modular form. Pressure transducer modules and analog to digital converter module small enough to fit within cavities of average-sized wind-tunnel models. All switching done electronically. Temperature controlled environment maintained within sensor modules so accuracy maintained while ambient temperature varies.

Coe, C. F.↗
NASA NTRS1980

Heart rate, multiple body temperature, long-range and long-life telemetry system for free-ranging animals

The design details and rationale for a versatile, long-range, long-life telemetry data acquisition system for heart rates and body temperatures at multiple locations from free-ranging animals are presented. The design comprises an implantable transmitter for short to medium range transmission, a receiver retransmitter collar to be worn for long-range transmission, and a signal conditioner interface circuit to assist in signal discrimination and demodulation of receiver or tape-recorded audio outputs. Implanted electrodes are used to obtain an ECG, from which R-wave characteristics are selected to trigger a short RF pulse. Pulses carrying heart rate information are interrupted periodically by a series of pulse interval modulated RF pulses conveying temperature information sensed at desired locations by thermistors. Pulse duration and pulse sequencing are used to discriminate between heart rate and temperature pulses as well as radio frequency interference. The implanted transmitter may be used alone for medium and short-range tracking, or with a receiver-transmitter collar that employs commercial tracking equipment for transmissions of up to 12 km. A system prototype has been tested on a dog.

Lund, G. F.↗
NASA NTRS1993

Mechanosensory calcium-selective cation channels in epidermal cells

This paper explores the properties and likely functions of an epidermal Ca(2+)-selective cation channel complex activated by tension. As many as eight or nine linked or linkable equivalent conductance units or co-channels can open together. Open time for co-channel quadruplets and quintuplets tends to be relatively long with millimolar Mg2+ (but not millimolar Ca2+) at the cytosolic face of excised plasma membrane. Sensitivity to tension is regulated by transmembrane voltage and temperature. Under some circumstances channel activity is sychronized in rhythmic pulses. Certain lanthanides and a cytoskeleton-disturbing herbicide that inhibit gravitropic reception act on the channel system at low concentrations. Specifically, ethyl-N-phenylcarbamate promotes tension-dependent activity at micromolar levels. With moderate suction, Gd3+ provided at about 0.5 micromole at the extracellular face of the membrane promotes for several seconds but may then become inhibitory. Provision at 1-2 micromoles promotes and subsequently inhibits more vigorously (often abruptly and totally), and at high levels inhibits immediately. La3+, a poor gravitropic inhibitor, acts similarly but much more gradually and only at much higher concentrations. These properties, particularly these susceptibilities to modulation, indicate that in vivo the mechanosensitive channel must be mechanosensory and mechanoregulatory. It could serve to transduce the shear forces generated in the integrated wall-membrane-cytoskeleton system during turgor changes and cell expansion as well as transducing the stresses induced by gravity, touch and flexure. In so far as such transduction is modulated by voltage and temperature, the channels would also be sensors for these modalities as long as the wall-membrane-cytoskeleton system experiences mechanical stress.

NASA Discipline Number 40-50↗
NASA NTRS2000

Long-term Global Morphology of Gravity Wave Activity Using UARS Data

An extensive body of research this quarter is documented. Further methodical analysis of temperature residuals in Cryogenic Limb Array Etalon Spectrometer (CLAES) Version 8 level 3AT data show signatures during December 1992 at middle and high northern latitudes that, when compared to Naval Research Laboratory/Mountain Wave Forecast Model (NRL)/(MWFM) mountain wave hindcasts, reveal evidence of long mountain waves in these data over Eurasia, Greenland, Scandinavia and North America. The explicit detection of gravity waves in limb-scanned Cryogenic Infrared Spectrometers and Telescopes for the Atmosphere (CRISTA) temperatures is modeled at length, to derive visibility functions. These insights are used to convert CRISTA gravity wave temperature residuals into data that more closely resemble gravity wave fluctuations detected in data from other satellite instruments, such as Microwave Limb Sounder (MLS), Limb Infrared Monitor of the Stratosphere (LIMS) and Global Positioning System/Meteorology (GPS)/(MET). Finally, newly issued mesospheric temperatures from inversion of CRISTA 15gin emissions are analyzed using a new method that uses separate Kalman fits to the ascending and descending node data. This allows us to study global gravity wave amplitudes at two local times, 12 hours apart. In the equatorial mesosphere, where a large diurnal tidal temperature signal exists, we see modulations of gravity wave activity that are consistent with gravity wave-tidal interactions produced by tidal temperature variability.

Eckermann, Stephen D.↗
NASA NTRS2018

The Atmosphere-Ocean Interface Layer of NASA's Goddard Earth Observing System Model and Data Assimilation System Volume 51

The Goddard Earth Observing System (GEOS) general circulation model (GCM) includes modules for sea surface temperature (SST) diurnal warming and cool-skin layers. To support the application of a coupled atmosphere-ocean data assimilation capability, the GCM needs to be flexible enough to support both coupled atmosphere ocean general circulation model (AOGCM) and atmosphere-only (AGCM) configurations, with only minor configuration changes at the user interface. This document presents a formulation of an atmosphere-ocean interface layer (AOIL) that serves this purpose. Previous work by Akella et al. (2017) described a version of a model for near-surface temperature variations, including both both diurnal warming and cool-skin effects, that has been used since 2017 in the near-real-time GEOS FP (forward processing) weather analysis and forecasting system. The diurnal cycle of SST in that version of the GEOS atmospheric data assimilation system (ADAS) undergoes a sharp decay in the late afternoon (local time). The updated AOIL presented here includes a modification of the similarity function used in the diurnal warming model. Results from offline model runs illustrate an improvement in the near-surface (less than 0:5m depth) diurnal cycle compared to the original formulation. The new formulation requires minimal parameter tuning, and the improvements are robust across long (several month) simulation periods. This new model formulation, however, retains some deficiences from the previous module, such as a small warm bias in calm wind conditions for water depths below 1m. Our future work would include surface salinification and sea-ice into the AOIL.

Koster, Randal D.↗
NASA NTRS1979

Engineering aspects of a thermal control subsystem for the 25 kW power module

The paper presents the key trade study results, analysis results, and the recommended thermal control approach for the 25 kW power module defined by NASA. Power conversion inefficiencies and component heat dissipation results in a minimum heat rejection requirement of 9 kW to maintain the power module equipment at desired temperature levels. Additionally, some cooling capacity should be provided for user payloads in the sortie and free-flying modes. The baseline thermal control subsystem includes a dual-loop-pumped Freon-21 coolant with the heat rejected from deployable existing orbiter radiators. Thermal analysis included an assessment of spacecraft orientations, radiator shapes and locations, and comparison of hybrid heat pipe and all liquid panels.

Schroeder, P. E.↗
NASA NTRS1981

Development of a preprototype hyperfiltration wash water recovery subsystem

The use of hyperfiltration as a mode of reclamation of waste water on board an extended mission spacecraft was investigated. Two basic approaches are considered with respect to hyperfiltration of wash water recovery. The initial approach involves the use of a hollow fiber permeator and a tubular module, operating at ambient temperature. In this system, relatively large doses of biocides are used to control microbial activity. Since biocides require a long contact time, and many have adverse dematological effects as well as many interact with membrane material, a second approach is considered which involves operating at pasturization temperature.

Source record↗
NASA NTRS1982

Development of a HgCdTe photomixer and impedance matched GaAs FET amplifier

A research program for the development of a 10.6 micron HgCdTe photodiode/GaAs field effect transistor amplifier package for use at cryogenic temperatures (77k). The photodiode/amplifier module achieved a noise equivalent power per unit bandwidth of 5.7 times 10 to the 20th power W/Hz at 2.0 GHz. The heterodyne sensitivity of the HgCdTe photodiode was improved by designing and building a low noise GaAs field effect transistor amplifier operating at 77K. The Johnson noise of the amplifier was reduced at 77K, and thus resulted in an increased photodiode heterodyne sensitivity.

Shanley, J. F.↗
NASA NTRS1984

Helium and Hydrogen of the Local Interstellar Mdium Observed in the Vicinity of the Sun

The Sun illuminates the hydrogen and helium atoms of the interstellar medium through which it travels. As a result, the Sun and the whole solar system are imbedded in a glow of the resonance lines of hydrogen (H Lyman alpha; 121.6nm) and helium (58.4nm). From the intensity distribution of the glow in the solar system, the density of H and He in the local interstellar medium (LISM) and the direction of the relative motion between the Sun and the LISM in the vicinity of the Sun are derived. The velocity module and the LISM temperature are more adequately found from a measurement of the Lyman alpha line shape, which is an image of the velocity distribution of H atoms. The result is summarized and together the methods of interpretation and difficulties are dicusssed.

Bertaux, J. L.↗
NASA NTRS1985

Electric Field Containerless Processing Technology

The objective of this task is to develop the science and technology base required to design and construct a high temperature electric field positioning module that could be used by materials scientists to conduct containerless science experiments in a low gravity environment. Containerless science modules that employ electric fields to position and manipulate samples offer several advantages over acoustic or electromagnetic systems. The electric field system will operate not only at atmospheric pressures but also in a vacuum, in contrast to the acoustic modules which can only operate in atmosphere where the acoustic forces are sufficient. The electric field technique puts minimum energy into the sample, whereas the electromagnetic system can deposit energy into the sample through eddy current heat as well as physical mixing in the sample. Two types of electric field modules have been constructed and tested to date. One employs a charged sample and uses electrostatic forces to position and control the sample. The second type of module induces electrical polarization of the sample and electric field gradients to position and control the sample.

Elleman, D. D.↗
NASA NTRS1985

Module flammability research

New materials were developed which show promise of fabricating modules that can pass the Underwriter Laboratories Class A burning brand test for fire ratable solar cell modules. It is concluded that fire resistant module design require special high temperature materials and constructions to achieve Class B and Class A ratings. Also, synergisms exist between back surface materials and module configuration.

Sugimura, R. S.↗
NASA NTRS1991

Status of Sundstrand research

Wind shear detection status is presented in the form of view-graphs. The following subject areas are covered: second generation detection (Q-bias, gamma bias, temperature biases, maneuvering flight modulation, and altitude modulation); third generation wind shear detection (use wind shear computation to augment flight path and terrain alerts, modulation of alert thresholds based on wind/terrain data base, incorporate wind shear/terrain alert enhancements from predictive sensor data); and future research and development.

Bateman, Don↗
NASA NTRS1991

Gaseous oxygen detection using laser diodes

Transitions in the R-branch of the O2 A-band have been observed by modulating IR laser diode temperatures; on the basis of these transitions, O2 concentrations as low as 750 ppm can be determined. The transmission measurement's achievable precision correlates with an O2 concentration uncertainty of only 0.5 percent. Both the concentration and the static temperature of the gas are thereby determinable. Improved optics are being designed to improve these performance figures.

Fox, Curtis W.↗
NASA NTRS1999

Mapping the Martian Meteorology

The Mars-adapted version of the NASA/GISS general circulation model (GCM) has been applied to the hourly/daily simulation of the planet's meteorology over several seasonal orbits. The current running version of the model includes a diurnal solar cycle, CO2 sublimation, and a mature parameterization of upper level wave drag with a vertical domain extending from the surface up to the 6 micro b level. The benchmark simulations provide a four-dimensional archive for the comparative evaluation of various schemes for the retrieval of winds from anticipated polar orbiter measurements of temperatures by the Pressure Modulator Infrared Radiometer.

Allison, Michael↗