Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Comparing net zero pathways across the Atlantic A model inter-comparison exercise between the Energy Modeling Forum 37 and the European Climate and Energy Modeling Forum

Europe and North America account for 32 % of current carbon emissions. Due to distinct legacy systems, energy infrastructure, socioeconomic development, and energy resource endowment, both regions have different policy and technological pathways to reach net zero by the mid-century. Against this background, our paper examines the results from the net zero emission scenarios for Europe and North America that emerged from the collaboration of the European and American Energy Modeling Forums. Here, in our analysis, we perform an inter-comparison of various integrated assessments and bottom-up energy system models. A clear qualitative consensus emerges on five main points. First, Europe and the United States reach net zero targets with electrification, demand-side reductions, and carbon capture and sequestration technologies. Second, the use of carbon capture and sequestration is more predominant in the United States due to a steeper decarbonization schedule. Third, the buildings sector is the easiest to electrify in both regions. Fourth, the industrial sector is the hardest to electrify in the United States and transportation in Europe. Fifth, in both regions, the transition in the energy mix is driven by the substitution of coal and natural gas with solar and wind, but to a different extent.

100 % renewables↗
DOE OSTI2022

Summarizing experimental sensitivities of collider experiments to dark matter models and comparison to other experiments

Comparisons of the coverage of current and proposed dark matter searches can help us to understand the context in which a discovery of particle dark matter would be made. In some scenarios, a discovery could be reinforced by information from multiple, complementary types of experiments; in others, only one experiment would see a signal, giving only a partial, more ambiguous picture; in still others, no experiment would be sensitive and new approaches would be needed. In this whitepaper, we present an update to a similar study performed for the European Strategy Briefing Book performed within the dark matter at the Energy Frontier (EF10) Snowmass Topical Group We take as a starting point a set of projections for future collider facilities and a method of graphical comparisons routinely performed for LHC DM searches using simplified models recommended by the LHC Dark Matter Working Group and also used for the BSM and dark matter chapters of the European Strategy Briefing Book. These comparisons can also serve as launching point for cross-frontier discussions about dark matter complementarity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

On the computational solution of vector-density based continuum dislocation dynamics models: A comparison of two plastic distortion and stress update algorithms

Continuum dislocation dynamics models of mesoscale plasticity consist of dislocation transport-reaction equations coupled with crystal mechanics equations. The coupling between these two sets of equations is such that dislocation transport gives rise to the evolution of plastic distortion (strain), while the evolution of the latter fixes the stress from which the dislocation velocity field is found via a mobility law. Earlier solutions of these equations employed a staggered solution scheme for the two sets of equations in which the plastic distortion was updated via time integration of its rate, as found from Orowan's law. In this work, we show that such a direct time integration scheme can suffer from accumulation of numerical errors. We introduce an alternative scheme based on field dislocation mechanics that ensures consistency between the plastic distortion and the dislocation content in the crystal. The new scheme is based on calculating the compatible and incompatible parts of the plastic distortion separately, and the incompatible part is calculated from the current dislocation density field. Stress field and dislocation transport calculations were implemented within a finite element based discretization of the governing equations, with the crystal mechanics part solved by a conventional Galerkin method and the dislocation transport equations by the least squares method. A simple test was first performed to show the accuracy of the two schemes for updating the plastic distortion, which shows that the solution method based on field dislocation mechanics is more accurate. This method then was used to simulate an austenitic steel crystal under uniaxial loading and multiple slip conditions. By considering dislocation interactions caused by junctions, a hardening rate similar to discrete dislocation dynamics simulation results was obtained. Finally, the simulations show that dislocations exhibit some self-organized structures as the strain is increased.

36 MATERIALS SCIENCE↗
NASA NTRS2017

Application of Sweeping Jet Actuators on the NASA Hump Model and Comparison with CFDVAL2004 Experiments

Flow separation control over a wall-mounted hump model was studied experimentally to assess the performance of sweeping jet actuators. Results were compared to that of the 2004 CFD validation experiment (CFDVAL2004), which examined flow separation control with steady suction and unsteady zero-net-mass-flow actuators. Comparisons were carried out at low and high amplitude excitations. In addition to the active flow control methods, a passive flow control method (i.e., vortex generator) was used to complement the dataset. Steady/unsteady surface pressure measurements and surface oilflow visualization were used in the performance assessment of the actuators. The results indicated that the sweeping jet actuators are more effective than the steady suction and unsteady zero-net-mass-flow actuators. For the same momentum coefficient, the sweeping jet actuators produced more flow acceleration upstream of separation, more pressure recovery downstream, and consistently a smaller separation bubble.

Koklu, Mehti↗
DOE OSTI2020

Parallel Embeddings: a Visualization Technique for Contrasting Learned Representations

We introduce ``Parallel Embeddings'', a new technique that generalizes the classical Parallel Coordinates visualization technique from a sequence of features within a single matrix to a sequence of multiple feature matrices. This is accomplished by separately embedding each matrix in the sequence into a 2-D frame, juxtaposing these 2-D representations, then connecting points between frames. We outline how this visualization can be used for several ``model comparison'' tasks in machine learning. We compare user performance with Parallel Embeddings to a baseline using the TensorFlow Embedding Projector for estimating model accuracy and understanding conceptual model differences. We found that users were more accurate with Parallel Embeddings for model comparison and that users learned how to use Parallel Embeddings more quickly than TensorFlow Embedding Projector. Furthermore, users' analytical process using Embedding Projector was positively affected by using Parallel Embeddings beforehand.

Model comparison, machine learing, machine learnin↗
NASA NTRS2001

Mixing in the Extratropical Stratosphere: Model-measurements Comparisons using MLM Diagnostics

We evaluate transport processes in the extratropical lower stratosphere for both models and measurements with the help of equivalent length diagnostic from the modified Lagrangian-mean (MLM) analysis. This diagnostic is used to compare measurements of long-lived tracers made by the Cryogenic Limb Array Etalon Spectrometer (CLAES) on the Upper Atmosphere Research Satellite (UARS) with simulated tracers. Simulations are produced in Chemical and Transport Models (CTMs), in which meteorological fields are taken from the Goddard Earth Observing System Data Assimilation System (GEOS DAS), the Middle Atmosphere Community Climate Model (MACCM2), and the Geophysical Fluid Dynamics Laboratory (GFDL) "SKYHI" model, respectively. Time series of isentropic equivalent length show that these models are able to capture major mixing and transport properties observed by CLAES, such as the formation and destruction of polar barriers, the presence of surf zones in both hemispheres. Differences between each model simulation and the observation are examined in light of model performance. Among these differences, only the simulation driven by GEOS DAS shows one case of the "top-down" destruction of the Antarctic polar vortex, as observed in the CLAES data. Additional experiments of isentropic advection of artificial tracer by GEOS DAS winds suggest that diabatic movement might have considerable contribution to the equivalent length field in the 3D CTM diagnostics.

Ma, Jun↗
NASA NTRS1992

Measurements of LET spectra and comparison to models

Measurements of LET spectra for near-earth orbits with various inclinations and altitudes are presented. A comparison with calculated LET spectra shows that the contribution from direct ionizing galactic cosmic rays is well described by the models. An additional contribution to the spectra originates from stopping protons and from nuclear interactions of particles with material. In the case of an interaction, a large amount of energy is deposited in a small volume by target recoils or target fragments. These events will be called short range (SR) events. For a low-inclination orbit radiation belt protons are the main source of these events while galactic protons become more important when increasing the inclination to near-polar orbits. It is shown that the contribution of SR events for orbits with low altitude (324 km) and 57-deg inclination is comparable to that for an orbit with 28-deg inclination at a high altitude (510 km).

Wiegel, B.↗
DOE OSTI2023

Fundamental study of gas species transport in the oxygen electrode of solid oxide fuel and electrolysis cells

A fundamental analysis of multicomponent gas transport models was performed in application to the oxygen electrodes of solid oxide cells. It is common practice to neglect the effect of pressure gradients within oxygen electrodes, even though a net molar flux at the electrolyte surface implies that a pressure gradient must exist. The influence of both Darcy velocity and Knudsen flux are considered in the context of ordinary (Fickian) diffusion, the dusty gas model, and the binary friction model. Comparisons between the models and different sets of assumptions are made via parametric studies on operating load, oxygen partial pressure, microstructural properties, and electrode thickness. Results show that the pressure gradient will have a significant impact on the oxygen concentration distribution and therefore the concentration overpotential. In electrolysis mode, pressure increases up to 1 atm are predicted, indicating that pressure at the electrode/electrolyte interface could contribute to electrode delamination. Additionally, it is found that Darcy's law is insufficient for calculating the pressure distribution without accounting for the flux due to Knudsen diffusion. Additionally, it is found that for the range of properties typical of oxygen electrodes, there is a negligibly small difference between the dusty gas model and binary friction model from a practical standpoint.

08 HYDROGEN↗
DOE OSTI2025

Decoding diffraction and spectroscopy data with machine learning: A tutorial

This Tutorial provides a step-by-step guide on how to apply supervised machine-learning techniques to analyze diffraction and spectroscopy data. This Tutorial details four models—a reconstruction-focused model, a regression-focused model, a hybrid reconstruction/regression model, and a multimodal model—that use x-ray diffraction profiles and vibrational density of states spectra to predict various microstructural descriptors. In this Tutorial, we cover data pre-processing steps, constructions of the models via dimensionality reduction and regression, training, and analysis of these models. Comparisons of the model’s performance are provided, highlighting the strength and weakness of the various approaches utilized.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The impact of composition choices on solar evolution: age, helio- and asteroseismology, and neutrinos

ABSTRACT The Sun is the most studied and well-known star, and as such, solar fundamental parameters are often used to bridge gaps in the knowledge of other stars, when these are required for modelling. However, the two most powerful and precise independent methodologies currently available to infer the internal solar structure are in disagreement. We aim to show the potential impact of composition choices in the overall evolution of a star, using the Sun as example. To this effect, we create two Standard Solar Models and a comparison model using different combinations of metallicity and relative element abundances and compare evolutionary, helioseismic, and neutrino-related properties for each. We report differences in age for models calibrated to the same point on the HR diagram, in red giant branch, of more than 1 Gyr, and found that the current precision level of asteroseismic measurements is enough to differentiate these models, which would exhibit differences in period spacing of 1.30–2.58 per cent. Additionally, we show that the measurement of neutrino fluxes from the carbon–nitrogen–oxygen cycle with a precision of around 17 per cent, which could be achieved by the next generation of solar neutrino experiments, could help resolve the stellar abundance problem.

Capelo, Diogo↗
DOE OSTI2021

Data-Driven Exploration of Climate Attractor Manifolds For Long-Term Predictability

Focal Area: This white paper responds to Focal Area 3. We seek to gain insight into decadal-scale climate predictability by applying novel manifold-finding probabilistic AI techniques to the complex data produced by Earth System models (ESMs) such as E3SM. The associated portfolio of research activities leverages DOE’s asset mix of HPC platforms, climate expertise, climate simulation codes, and AI expertise. Science Challenge: Climate and climate models are dynamical systems exhibiting properties that are interpretable through chaos theory. The theory contains an important concept that is relevant to multi-decade-scale climate prediction: a chaotic attractor. While the space containing all the possible states of the Earth’s atmosphere and ocean, the possible weather, is large, the realized states tend to stay near the smaller-dimensioned attractor. This behavior is responsible for the “order behind the irregularity” [1] of climate phenomena. Climate change can be thought of as a change in the properties of the attractor, and predicting the climate over years to decades is equivalent to predicting how those properties will change. To date, the attractor has been a useful conceptual tool, but has not been amenable to direct characterization. A new development is the advent of efficient high-dimensional manifold-finding probabilistic AI techniques, which permit a data-driven characterization of the ESM attractor and its probability distribution over weather states. Such a characterization would result in a natural dimensional reduction — a “non-linear Principal Components Analysis (PCA) adapted to climate simulation data” — leading to important advances in scenario-based long-term climate prediction, long-term prediction of water cycle extremes, ESM verification, inter-model comparison, and process model development.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Inclusive inelastic scattering of heavy ions and nuclear correlations

Calculations of inclusive inelastic scattering distributions for heavy ion collisions are considered within the high energy optical model. Using ground state sum rules, the inclusive projectile and complete projectile-target inelastic angular distributions are treated in both independent particle and correlated nuclear models. Comparisons between the models introduced are made for alpha particles colliding with He-4, C-12, and O-16 targets and protons colliding with O-16. Results indicate that correlations contribute significantly, at small momentum transfers, to the inelastic sum. Correlation effects are hidden, however, when total scattering distributions are considered because of the dominance of elastic scattering at small momentum transfers.

Cucinotta, Francis A.↗
NASA NTRS1953

Design and Test of Mixed-flow Impellers III : Design and Experimental Results for Impeller Model MFI-2A and Comparison with Impeller Model MFI-1A

A mixed-flow impeller was designed to give a prescribed blade-surface velocity distribution at mean blade height for a given hub-shroud profile. The blade shape at mean blade height, which was produced by the prescribed velocity distribution, was extended by means of radial lines to form the composite blade shape from hub to shroud. The resulting blade was relatively thick; therefore, it was necessary to retain the inverse blade taper which resulted from extension of the radial lines in order to prevent merging or near merging of the separate blades near the hub. For the first test version of the impeller, designated the MFI-2A, the blade height was arbitrarily made greater than that for the basic impeller (the MFI-2) to allow for viscous effects. At design equivalent speed of 1400 feet per second the peak pressure ratio and maximum adiabatic efficiency were 3.95 and 79 percent, respectively. The adiabatic efficiency of the MFI-2A is four points lower than that for impeller model MFI-1A, but because of the higher slip factor for the MFI-2A, the pressure ratios are approximately equal. The procedures followed in the design of the MFI-1A and MFI-2A were, in general, the same; and, although the prescribed initial condition resulted in geometrical configurations that were quite dissimilar, the resulting performance characteristics compare favorably with designs for which considerable development work has been necessary.

COMPRESSION AND COMPRESSORS↗
NASA NTRS1997

Surface Temperature Assimilation in Land Surface Models

This paper examines the utilization of surface temperature as a variable to be assimilated in offline land surface hydrological models. Comparisons between the model computed and satellite observed surface temperatures have been carried out. The assimilation of surface temperature is carried out twice a day (corresponding to the AM and PM overpass of the NOAA10) over the Red- Arkansas basin in the Southwestern United States (31 deg 50 min N - 36 deg N, 94 deg 30 min W - 104 deg 30 min W) for a period of one year (August 1987 to July 1988). The effect of assimilation is to reduce the difference between the surface soil moisture computed for the precipitation and/or shortwave radiation perturbed case and the unperturbed case compared to no assimilation.

Lakshmi, Venkataraman↗
NASA NTRS1999

Surface Temperature Assimilation in Land Surface Models

This paper examines the utilization of surface temperature as a variable to be assimilated in offline land surface hydrological models. Comparisons between the model computed and satellite observed surface temperatures have been carried out. The assimilation of surface temperature is carried out twice a day (corresponding to the AM and PM overpass of the NOAA10) over the Red-Arkansas basin in the Southwestern United States (31 degs 50 sec N - 36 degrees N, 94 degrees 30 seconds W - 104 degrees 3 seconds W) for a period of one year (August 1987 to July 1988). The effect of assimilation is to reduce the difference between the surface soil moisture computed for the precipitation and/or shortwave radiation perturbed case and the unperturbed case compared to no assimilation.

Lakshmi, Venkataraman↗