Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microstructure generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Influence of cooling rate on the development of multiple generations of {gamma}' precipitates in a commercial nickel base superalloy

The compositional and microstructural evolution of different generations of {gamma}' precipitates during the continuous cooling of a commercial nickel base superalloy, Rene88DT, has been characterized by three dimensional atom probe tomography coupled with energy-filtered transmission electron microscopy studies. After solutionizing in the single {gamma} phase field, continuous cooling at a very high rate results in a monomodal size distribution of {gamma}' precipitates with a high nucleation density and non-equilibrium compositions. In contrast, a relatively slower cooling rate ({approx} 24 deg. C/min) results in a multi-modal size distribution of {gamma}' precipitates with the larger first generation primary precipitates exhibiting close to equilibrium composition, along with the smaller scale secondary {gamma}' precipitates, exhibiting non-equilibrium composition (excess of Co and Cr, depleted in Al and Ti). The composition of the {gamma} matrix near these precipitates also exhibits similar trends with the composition being closer to equilibrium near the primary precipitates as compared to the secondary precipitates. - Highlights: {yields} Effect of cooling rate on the precipitation of {gamma}' particles in commercial nickel base superalloy. {yields} Couples EFTEM and 3DAP studies to determine the composition and morphology of {gamma}' precipitates. {yields} Determination of near and far field compositional variations within the gamma matrix leading to subsequent precipitation.

36 MATERIALS SCIENCE↗

In situ monitoring of microstructure evolution during thermal processing of uranium-zirconium alloys using laser-generated ultrasound

In this study, laser-generated ultrasound was used to monitor microstructure evolution during thermal processing of as-cast, polycrystalline binary uranium-zirconium metallic fuel alloys with compositions of U-20wt.%Zr (U-20Zr), U-50wt.%Zr (U-50Zr) and U-80wt.%Zr (U-80Zr). Ultrasonic waveforms were recorded during heating and cooling the samples from room temperature to >973 K and back. A phase transition temperature for all three compositions was estimated from the temperature at which an abrupt and rapid reduction in ultrasonic velocities was observed. Microstructural features on the length scale of tens of micrometers were inferred from the observation of scattering of ultrasonic waves by elastic heterogeneities above ~823 K in U-20Zr, while a hysteresis in the ultrasonic velocities of U-80Zr upon cooling was attributed to a partial retention of the high temperature phase following thermal annealing. The U-50Zr alloy exhibited a reversible viscoelastic response above 933 K, as evidenced by the observation of high frequency attenuation of the shear component of the waveforms at high temperature. Ultrasonic measurements were supplemented by in situ transmission electron microscopy (TEM). The TEM images revealed that the δ-U-Zr matrix in the three compositions underwent a spinodal decomposition above ~823 K into nanoscale regions. The ultrasonic measurements revealed larger, micron-scale structure evolution in the U-20Zr alloy at the same temperature. This large-scale structure is associated with heterogeneous regions having different Zr content. Our findings show the potential heating rate dependence of microstructural evolution in U-Zr alloys and highlight differences in the thermomechanical response and associated length scales during thermal annealing between single- and dual-phase compositions. These results demonstrate the utility of laser ultrasonics to rapidly and efficiently scan phase boundaries and monitor micrometer-scale structure evolution in metallic fuel alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Temperature-dependent mechanical properties and crystal plasticity parameters for additively manufactured Haynes-214 alloy: Experiments and numerical modeling

Our experimental mechanical testing data demonstrated that the additively manufactured (AM) laser powder bed fusion (L-PBF) Haynes-214 alloy exhibits non-linear mechanical properties as the temperature rises from ambient to 870 °C. Crystal plasticity (CP) simulations provide an effective approach to gaining deeper insights into microstructure-property linkages under thermomechanical loading. This method can reduce the need for costly high-temperature mechanical testing while accounting for the effects of crystallographic texture and grain morphology on the mechanical behavior of AM materials. However, calibrating a CP model is time-consuming because individual simulations are computationally expensive and hundreds (or more) of iterations over parameter sets may be required. To address this issue, we have designed a machine learning-differential evolution (ML-DE) CP framework that can accurately interpolate the tensile properties of AM L-PBF Haynes-214 alloy across a wide temperature range from ambient to 870 °C, with minimal reliance on experimental data. The framework uses electron backscatter diffraction (EBSD) measurements to generate statistically equivalent microstructural volume elements to serve as inputs to the CP modeling framework. Stress–strain curves were generated from 1000 CP simulations, which serve as the training data set for the three ML regression algorithms explored: linear, extra-trees, and multi-layer perceptron. These three regression models were independently evaluated to compare their efficiency and identify the most suitable algorithm for the given problem. Results revealed that the extra-trees ML regressor outperforms the other models in both qualitative and quantitative aspects with an R 2 of 0.98. Subsequently, the differential evolution optimization approach is employed to calibrate the ML-based CP material parameters with experimental results obtained at various temperatures. Finally, temperature-dependent CP material parameters are formulated. The effectiveness and efficiency of the designed framework are validated through comparison with experimental results, demonstrating a high degree of agreement. These calibrated parametric constitutive equations enable further use of the CP model to study the deformation behavior of this alloy under a wide range of thermo-mechanical loading conditions.

36 MATERIALS SCIENCE↗

Heterogeneous energetic material damage simulator (HEDS): A deep learning approach to simulate damage–sensitivity linkages

Damage in the microstructures of energetic materials (EMs), such as propellants and plastic bonded explosives (PBXs), can significantly alter their response to external loads. Both sensitization and desensitization can occur, causing concerns with safety and performance in the field; predictive models that connect damage and the sensitivity of EMs can enable design and provide confidence in their robustness and reliability. However, modeling of damage evolution is challenging for real microstructures of EMs; samples of damaged EMs are difficult to obtain, thereby hindering experiments and direct numerical simulations to determine the sensitivity of EMs at various stages of damage. Here, we develop an approach to generate synthetic, i.e., in silico produced, damaged microstructures for use in simulations to connect damage levels to sensitivity. The development of the present workflow to generate and impose varying levels of damage in microstructures, known as HEDS (Heterogeneous Energetic Material Damage Simulator), begins with a small set of images of damaged PBXs and combines a collection of deep neural network techniques to generate microstructures with varying levels of damage. By making the synthetic microstructures conform closely to those observed in available real, imaged microstructures, we develop an ensemble of damaged microstructures that can be used for in silico shock experiments. HEDS develops these microstructure ensembles as level set fields, which are directly employed in a sharp interface Eulerian hydrocode where shock simulations are performed to quantify the energy release rate from hotspot fields generated in the microstructure. These capabilities can be useful for the analysis and assessment of changes in the sensitivity of EMs and to design formulations that are less susceptible to damage-induced changes in sensitivity and performance.

Fang, Irene (ORCID:0009000844557122)↗

Effect of multiple repairs in girth welds of pipelines on the mechanical properties

This work presents the results of multiple weld repairs in the same area in seamless API X-52 microalloyed steel pipe. Four conditions of shielded metal arc welding repairs and one as-welded specimen of the girth weld were characterized to determine changes in the microstructure, grain size in the heat affected zone, and to evaluate their effect on the mechanical properties of the weld joints. The mechanical properties by means of tension tests, Charpy-V impact resistance and Vickers hardness of the welds were analyzed. The results indicate that significant changes are not generated in the microstructural constituents of the heat affected zone. Grain growth in the heat affected zone at the specimen mid-thickness with the number of repairs was observed. Tensile strength of the weld joints meets the requirement of the API 1104 standard even after the fourth weld repair. Significant reduction in Charpy-V impact resistance with the number of weld repairs was found when the notch location was in the intersection of the fusion line with the specimen mid-thickness. A significant increase in the Vickers hardness of the heat affected zone occurred after the first repair and a gradual decrease in the Vickers hardness occurred as the number of repairs increases.

36 MATERIALS SCIENCE↗

CHEMISTRY IN DIFFUSE CLOUDS WITH TRANSIENT MICROSTRUCTURE

Microstructure is observed on many lines of sight in the diffuse interstellar medium, mainly through variations in atomic line absorptions on timescales of a decade or less. This timescale implies that microstructure exists on a size scale comparable with that of the solar system; it is overpressured and transient. Both observations and theory confirm that a specific chemistry occurs in microstructure. We therefore explore a model of diffuse interstellar gas in which the chemistry in diffuse clouds is supplemented by chemistry in many transient and tiny perturbations. These perturbations are here assumed to be of unidentified origin, but it is assumed that ambipolar diffusion occurs within them. For plausible physical parameters, we find that this model can account for the range of molecular column densities observed in diffuse clouds, including species not usually accounted for by conventional models. Some molecular ions, predicted to be generated in the microstructure (including HS{sup +}, CH{sup +} {sub 2}, CH{sup +} {sub 3}, H{sub 2}O{sup +}, and H{sub 3}O{sup +}) but not yet observed in diffuse clouds, should be present at levels that may allow their detection.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicting grid-size-dependent fracture strains of DP980 with a microstructure-based post-necking model

Ductile fracture is a local phenomenon, and it is well established that fracture strain levels depend on both stress triaxiality and the resolution (grid size) of strain measurements. Two-dimensional plane strain post-necking models with different representative volume element (RVE) sizes are used to predict the size-dependent fracture strain of a commercial dual-phase steel, DP980. The models are generated from the actual microstructures, and the individual phase flow properties and literature-based individual phase damage parameters for the Johnson-Cook model are used for ferrite and martensite. A monotonic relationship is predicted: the smaller the model size, the higher the fracture strain. Thus, a general framework is developed to quantify the size-dependent fracture strains for multiphase materials. In addition to the RVE sizes, the influences of intrinsic microstructure features, i.e., the flow curve and fracture strains of the two constituent phases, on the predicted fracture strains also are examined. Application of the derived fracture strain versus RVE size relationship is demonstrated with large clearance trimming simulations with different element sizes.

Cheng, G. (ORCID:0000000268604420)↗

A Finite Difference Analysis of the Effect of Graphene Additions on the Electrical Conductivity of Polycrystalline Copper

A finite-difference method was used to explore the effect of graphene on the bulk electrical conductivity of copper-graphene composites. In this capacity, grain orientation information from pure copper and copper-graphene composites were used to generate synthetic 3D microstructures. The electrical conductivity of these microstructures were calculated using the finite difference method assuming different average grain sizes. From these calculations, we demonstrate that when high-conductivity grain boundaries are present within the microstructure arising from the presence of graphene, an increase in the bulk electrical conductivity is observed. On the other hand, the difference in textures between copper and copper-graphene composites may not account for a significant difference in bulk electrical conductivity. In comparison, the copper grain size has a considerably larger effect on electrical conductivity as previously anticipated. This is one of the first demonstrations of a physical basis for enhanced conductivity composites and presents pathways for further investigations on the effects of composite microstructural features, material interfaces and graphene content on electrical performance.

Frazier, William E.↗

A Comparative Study on Artificial Neural Network, Phenomenological-Based Constitutive and Modified Fields–Backofen Models to Predict Flow Stress in Ti-4Al-3V-2Mo-2Fe Alloy

The flow curve was obtained from the superplastic tensile tests in the temperature range of 1033-1153 K and strain rate range of 0.001-0.1 s{sup −1}. Results showed that strain hardening (SH) was insensitive to deformation parameter variation but with the nature of material, while stable state (SS) and dynamic softening (DS) were significantly associated with a thermal activated process. The occurrence of secondary hardening and softening was attributed to discontinuous dynamic recrystallization. And the generation of necklace microstructure at grain boundaries was caused by bulging. Based on the experimental data, the artificial neural network (ANN), phenomenological-based constitutive (PBC) and modified Fields–Backofen (MFB) models were developed, and their predictability and adaptability for the description of the flow behavior during hot processing were evaluated by analyzing the employed standard statistical parameters. Comparatively, ANN model is capable of tracing the complex flow behavior including SH, SS and DS substages. Concerning PBC model, it can not only predict flow stress with satisfactory accuracy, but also represent the flow trend with the larger strain. MFB model adapts well to the flow curve with a broad SH region without DS effect.

36 MATERIALS SCIENCE↗

Fission gas bubbles and recrystallization-induced degradation of the effective thermal conductivity in U-7Mo fuels

We have developed a mesoscale model to calculate the degradation of the effective thermal conductivity in irradiated U-Mo alloys caused by the fission-induced gas bubbles and recrystallization. The phase-field approach is employed to generate the grain microstructures of U-7Mo fuels with intra- and inter-granular gas bubbles. Based on the phase-field microstructures, the thermal conductivities of U-7Mo as a function of the fission density can be predicted by the developed mesoscale model. The predicted values of effective thermal conductivities are consistent with available experimental data. Results show that the effective thermal conductivity decreases rapidly with recrystallization compared to the one prior to recrystallization, which can be attributed to the sudden increase of grain boundary densities and corresponding intergranular gas bubbles at high fission densities. Smaller grain size fuel structure has a lower thermal conductivity at the same fission density due to the increased grain boundary density. The current study can provide a better understanding of the fission-induced degradation mechanism of the thermal conductivity in U-Mo fuels.

36 MATERIALS SCIENCE↗

An optimum approximation of n-point correlation functions of random heterogeneous material systems

An approximate solution for n-point correlation functions is developed in this study. In the approximate solution, weight functions are used to connect subsets of (n-1)-point correlation functions to estimate the full set of n-point correlation functions. In previous related studies, simple weight functions were introduced for the approximation of three and four-point correlation functions. In this work, the general framework of the weight functions is extended and derived to achieve optimum accuracy for approximate n-point correlation functions. Such approximation can be utilized to construct global n-point correlation functions for a system when there exist limited information about these functions in a subset of space. To verify its accuracy, the new formulation is used to approximate numerically three-point correlation functions from the set of two-point functions directly evaluated from a virtually generated isotropic heterogeneous microstructure representing a particulate composite system. Similarly, three-point functions are approximated for an anisotropic glass fiber/epoxy composite system and compared to their corresponding reference values calculated from an experimental dataset acquired by computational tomography. Results from both virtual and experimental studies confirm the accuracy of the new approximation. The new formulation can be utilized to attain a more accurate approximation to global n-point correlation functions for heterogeneous material systems with a hierarchy of length scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of the spectral and coherent properties of a supercontinuum with pronounced soliton structures in the spectrum by using phase-modulated femtosecond pump pulses

It is found experimentally for the first time that the initial phase modulation of femtosecond pump pulses considerably affects the degree of coherence of the short-wavelength radiation of a supercontinuum with pronounced soliton structures in the spectrum generated in a microstructure fibre. The long-wavelength soliton radiation preserves the complete coherence upon changing the phase modulation of the pump pulse despite considerable variations of the carrier frequency of solitons. The maximum width of the supercontinuum and the maximum degree of coherence of its short-wavelength radiation are achieved for small positive values of the phase modulation parameters. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Implicit Approach to Phase Field Modeling of Solidification for Additively Manufactured Alloys [Slides]

We are leveraging modern algorithms and computational science to provide a route to predictive simulation of microstructure evolution on emerging exascale architectures. We are utilizing the fastest supercomputers in the world for modeling and simulation of microstructure evolution for generation of data under AM conditions. Solidification conditions in AM can be tailored for the reliable design of materials to specific performance requirements. Developing computational tools to further characterize alloys and correlate the processing-structure-properties-performance (PSPP) relationship.

36 MATERIALS SCIENCE↗

Mechanical Failure Risk Management for In-Service CSP Nitrate Hot Tanks

The hot thermal energy storage tanks in many operating (Gen2) concentrating solar power plants are designed to contain molten nitrate solar salt at 565 Degrees Celsius and are constructed from 347H stainless steel (SS). From previous work, it is known that 347H SS weldments are potentially susceptible to stress-relaxation cracking (SRC), particularly in the heat-affected zone above 540 Degrees Celsius when no post-weld heat-treatment (PWHT) is performed. However, residual stresses can be reduced when weldments receive PWHT, while at the same time a crack-resistant microstructure is being generated. The overarching goal of this project was to optimize cost-effective, thickness-dependent, localized PWHT procedures and to investigate for feasible non-destructive evaluation (NDE) at commercial scale for hot tanks in Gen2 CSP using 347H SS.

14 SOLAR ENERGY↗

Metal hydride alloys with improved rate performance

Methods of preparing improved metal hydride alloy materials are provided. The alloys include a mixture of at least four of vanadium, titanium, nickel, chromium, and iron. The alloy is processed by at least one of thermal and physical treatment to generate a refined microstructure exhibiting improved kinetics when used as electrodes in MH batteries (e.g., higher discharge current). The thermal treatment includes rapid cooling of the alloy at greater than 10.sup.4 K/s. The physical treatment includes mechanical pulverization of the alloy after cooling. The microstructure is a single phase (body centered cubic) with a heterogeneous composition including a plurality of primary regions having a lattice parameter selected from the range of 3.02 .ANG. to 3.22 .ANG. and a plurality of secondary regions having a lattice parameter selected from the range of 3.00 .ANG. to 3.22 .ANG. and at least one physical dimension having a maximum average value less than 1 .mu.m.

36 MATERIALS SCIENCE↗

Generative Adversarial Networks and Mixture Density Networks-Based Inverse Modeling for Microstructural Materials Design

Abstract There are two broad modeling paradigms in scientific applications: forward and inverse. While forward modeling estimates the observations based on known causes, inverse modeling attempts to infer the causes given the observations. Inverse problems are usually more critical as well as difficult in scientific applications as they seek to explore the causes that cannot be directly observed. Inverse problems are used extensively in various scientific fields, such as geophysics, health care and materials science. Exploring the relationships from properties to microstructures is one of the inverse problems in material science. It is challenging to solve the microstructure discovery inverse problem, because it usually needs to learn a one-to-many nonlinear mapping. Given a target property, there are multiple different microstructures that exhibit the target property, and their discovery also requires significant computing time. Further, microstructure discovery becomes even more difficult because the dimension of properties (input) is much lower than that of microstructures (output). In this work, we propose a framework consisting of generative adversarial networks and mixture density networks for inverse modeling of structure–property linkages in materials, i.e., microstructure discovery for a given property. The results demonstrate that compared to baseline methods, the proposed framework can overcome the above-mentioned challenges and discover multiple promising solutions in an efficient manner.

36 MATERIALS SCIENCE↗