Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “metathesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Origins of Enhanced Ion Transport in Nanostructured Anion-Conducting Polyelectrolytes

Ion-conducting polymer chemistry and microstructure profoundly impact membrane water uptake and ionic conductivity. Water uptake strongly impacts ionic conductivity; yet excess water uptake compromises ion-exchange membrane mechanical properties. Although nanophase separation has been proposed to overcome this trade-off, it is unclear how polymer backbone architecture governs ionic nanostructure and its subsequent impact on water uptake and conductivity. Here, we integrate experiments and molecular dynamics simulations to elucidate the role of backbone chemistry in governing ionic nanostructure, hydration behavior, and ion transport in anion-conducting polyelectrolytes (ACPs). We systematically investigate hydrocarbon polynorbornene (PNB)-based ACPs with three distinct backbone architectures: vinyl-addition polymerization (VAP), ring-opening metathesis polymerization (ROMP), and hydrogenated ROMP. While maintaining comparable ion exchange capacities (IECs) and identical side-chain chemistry, we isolate the effects of backbone structure. We show that nanophase-separated ionic nanostructures originate in the dry state and evolve upon hydration through heterogeneous water uptake, with water preferentially partitioning into ion-rich domains. This nanophase separation arises from a delicate interplay between ionic segregation propensity and the entropic barrier imposed by backbone stiffness. Specifically, flexible backbones intensify attractive ion–ion interactions by reducing the entropic penalty for backbone deformation, promoting nanophase separation, while rigid backbones suppress ionic nanostructure formation. Nanophase-separated ion domains locally concentrate water upon hydration, which in turn enables the connectivity required for fast transport at lower water concentration values. Furthermore, these findings demonstrate that backbone chemistry can be tuned as a design lever to promote nanophase separation and enhance ion transport without excessive water uptake.

Anions↗
DOE OSTI2022

Rapid atom-efficient polyolefin plastics hydrogenolysis mediated by a well-defined single-site electrophilic/cationic organo-zirconium catalyst

Polyolefins comprise a major fraction of single-use plastics, yet their catalytic deconstruction/recycling has proven challenging due to their inert saturated hydrocarbon connectivities. Here a very electrophilic, formally cationic earth-abundant single-site organozirconium catalyst chemisorbed on a highly Brønsted acidic sulfated alumina support and characterized by a broad array of experimental and theoretical techniques, is shown to mediate the rapid hydrogenolytic cleavage of molecular and macromolecular saturated hydrocarbons under mild conditions, with catalytic onset as low as 90 °C/0.5 atm H 2 with 0.02 mol% catalyst loading. For polyethylene, quantitative hydrogenolysis to light hydrocarbons proceeds within 48 min with an activity of > 4000 mol(CH 2 units)·mol(Zr) –1 ·h –1 at 200 °C/2 atm H 2 pressure. Under similar solventless conditions, polyethylene-co–1-octene, isotactic polypropylene, and a post-consumer food container cap are rapidly hydrogenolyzed to low molecular mass hydrocarbons. Regarding mechanism, theory and experiment identify a turnover-limiting C-C scission pathway involving ß-alkyl transfer rather than the more common σ-bond metathesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lighting up hot stuff

Plasmonic heating by nanoparticles has been used to promote a range of chemical reactions. Now, thermoplasmonic activation has been applied to latent ruthenium catalysts, enabling olefin metathesis initiated by visible and infrared light. Additionally, the desire to harness light to drive chemical transformations has surely existed as long as the study of chemistry itself. In the earliest documented applications, light was used simply as a heat source — for example, in the distillation of liquids. Since that time, our knowledge of how light and matter interact has increased exponentially, with greater mechanistic and molecular understanding enabling modern photochemists to design molecules with a myriad of finely tuned optical properties for catalysis, biochemistry, optoelectronics and more. Nonetheless, the design and optimization of molecules to achieve specific optical properties is still challenging, and for some applications, a return to the ‘simplest’ transformation — that of light to heat — can offer a more efficient approach to achieve light-mediated chemical reactions. Now, writing in Nature Chemistry, Yossi Weizmann and colleagues describe a strategy for organic and polymer synthesis driven by the conversion of light to heat.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Controlled patterning of crystalline domains by frontal polymerization

Materials with hierarchical architectures that combine soft and hard material domains with coalesced interfaces possess superior properties compared with their homogeneous counterparts. These architectures in synthetic materials have been achieved through deterministic manufacturing strategies such as 3D printing, which require an a priori design and active intervention throughout the process to achieve architectures spanning multiple length scales. Here we harness frontal polymerization spin mode dynamics to autonomously fabricate patterned crystalline domains in poly(cyclooctadiene) with multiscale organization. This rapid, dissipative processing method leads to the formation of amorphous and semi-crystalline domains emerging from the internal interfaces generated between the solid polymer and the propagating cure front. The size, spacing and arrangement of the domains are controlled by the interplay between the reaction kinetics, thermochemistry and boundary conditions. Small perturbations in the fabrication conditions reproducibly lead to remarkable changes in the patterned microstructure and the resulting strength, elastic modulus and toughness of the polymer. Furthermore, this ability to control mechanical properties and performance solely through the initial conditions and the mode of front propagation represents a marked advancement in the design and manufacturing of advanced multiscale materials. Drawing inspiration from biological systems in which structural complexity develops through dissipative reaction–diffusion processes, this study explores a transformative synthetic manufacturing strategy aimed at harnessing the principles underpinning morphogenic growth, unlocking new avenues for advanced materials design and fabrication. Synthetic coupled reaction-transport processes offer a versatile yet relatively underexplored method to manipulate the spatial attributes of synthetic materials10. Here we introduce an innovative manufacturing approach based on frontal ring-opening metathesis polymerization (FROMP) that draws parallels with morphogenic growth and development, enabling the formation of patterned microstructures within polymeric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ni-catalysed dicarbofunctionalization for the synthesis of sequence-encoded cyclooctene monomers

The properties of polymeric materials can be modulated by factors such as sequence control or functional group modifications. However, the synthesis of new macromolecular scaffolds is limited by the accessibility of structurally diverse monomers. This work describes a one-step, nickel-catalysed synthesis of 5,6-diaryl cyclooctene monomers from the feedstock chemical 1,5-cyclooctadiene. The reaction proceeds in a modular, regio- and diastereoselective fashion, granting access to both homo- and hetero-diaryl cyclooctene monomers that smoothly undergo ring-opening metathesis polymerization (ROMP). The resulting 1,2-diaryl-substituted polymers possess sequences with head-to-head styrene dyads that have not been previously explored, giving rise to unique and tunable properties. Density functional theory calculations highlight mechanistic aspects of the nickel-catalysed diarylation reaction and the ruthenium-catalysed ROMP process, revealing a previously unappreciated role of the boronic ester in promoting migratory insertion, which was leveraged to provide enantioinduction.

Catalytic mechanisms↗
DOE OSTI2025

Real-time process monitoring and automated control for direct ink write 3D printing of frontally polymerizing thermosets

Additive manufacturing (AM) enables the fabrication of complex geometries, yet its application to thermosets remains limited by post-processing requirements. Frontal ring-opening metathesis polymerization (FROMP) offers a promising alternative, enabling energy-efficient, in situ curing of freestanding thermoset structures. This study presents a real-time process monitoring and automated control system for direct ink writing (DIW) of FROMP thermosets. By integrating thermochromic leuco dyes and computer vision, we enable real-time polymerization front tracking, allowing autonomous printing parameter adjustments for consistent geometries across resin formulations. The system’s accuracy was validated against manual tracking, demonstrating precise front velocity detection. Its adaptability was confirmed by printing freestanding mechanical springs with different resins, achieving consistent geometries and mechanical properties despite front velocity variations. These findings highlight the potential of automated DIW control for scalable, repeatable, and material-agnostic 3D printing of thermosets.

Mejia, Edgar Brian [Sandia National Laboratories (↗
DOE OSTI2021

Mechanochemical synthesis and structural analysis of trivalent lanthanide and uranium diphenylphosphinodiboranates

Phosphinodiboranates (H 3 BPR 2 BH 3 – ) are a class of borohydrides that have merited a reputation as weakly coordinating anions, which is attributed in part to the dearth of coordination complexes known with transition metals, lanthanides, and actinides. We recently reported how K(H 3 BP t Bu 2 BH 3 ) exhibits sluggish salt elimination reactivity with f-metal halides in organic solvents such as Et 2 O and THF. Here we report how this reactivity appears to be further attenuated in solution when the t Bu groups attached to phosphorus are exchanged for R = Ph or H, and we describe how mechanochemistry was used to overcome limited solution reactivity with K(H 3 BPPh 2 BH 3 ). Grinding three equivalents of K(H 3 BPPh 2 BH 3 ) with UI 3 (THF) 4 or LnI 3 (Ln = Ce, Pr, Nd) allowed homoleptic complexes with the empirical formulas U(H 3 BPPh 2 BH 3 ) 3 (1), Ce(H 3 BPPh 2 BH 3 ) 3 (2), Pr(H 3 BPPh 2 BH 3 ) 3 (3), and Nd(H 3 BPPh 2 BH 3 ) 3 (4) to be prepared and subsequently crystallized in good yields (50–80%). Single-crystal XRD studies revealed that all four complexes exist as dimers or coordination polymers in the solid-state, whereas 1 H and 11 B NMR spectra showed that they exist as a mixture of monomers and dimers in solution. Treating 4 with THF breaks up the dimer to yield the monomeric complex Nd(H 3 BPPh 2 BH 3 ) 3 (THF) 3 (4-THF). XRD studies revealed that 4-THF has one chelating and two dangling H 3 BPPh 2 BH 3 – ligands bound to the metal to accommodate binding of THF. In contrast to the results with K(H 3 BPPh 2 BH 3 ), attempting the same mechanochemical reactions with Na(H 3 BPH 2 BH 3 ) containing the simplest phosphinodiboranate were unsuccessful; only the partial metathesis product U(H 3 BPH 2 BH 3 )I 2 (THF) 3 (5) was isolated in poor yields. Here, despite these limitations, our results offer new examples showing how mechanochemistry can be used to rapidly synthesize molecular coordination complexes that are otherwise difficult to prepare using more traditional solution methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Janus bottlebrush compatibilizers

Bottlebrush random copolymers (BRCPs), consisting of a random distribution of two homopolymer chains along a backbone, can segregate to the interface between two immiscible homopolymers. BRCPs undergo a reconfiguration, where each block segregates to one of the homopolymer phases, adopting a Janus-type structure, reducing the interfacial tension and promoting adhesion between the two homopolymers, thereby serving as a Janus bottlebrush copolymer (JBCP) compatibilizer. Here, we synthesized a series of JBCPs by copolymerizing deuterated or hydrogenated polystyrene (DPS/PS) and poly(tert-butyl acrylate) (PtBA) macromonomers using ruthenium benzylidene-initiated ring-opening metathesis polymerization (ROMP). Subsequent acid-catalyzed hydrolysis converted the PtBA brushes to poly(acrylic acid) (PAA). The JBCPs were then placed at the interface between DPS/PS homopolymers and poly(2-vinyl pyridine) (P2VP) homopolymers, where the degree of polymerization of the backbone (N BB ) and the grafting density (GD) of the JBCPs were varied. Neutron reflectivity (NR) was used to determine the interfacial width and segmental density distributions (including PS homopolymer, PS block, PAA block and P2VP homopolymer) across the polymer-polymer interface. Our findings indicate that the star-like JBCP with N BB = 6 produces the largest interfacial broadening. Increasing N BB to 100 (rod-like shape) and 250 (worm-like shape) reduced the interfacial broadening due to a decrease in the interactions between blocks and homopolymers by stretching of blocks. Decreasing the GD from 100% to 80% at N BB = 100 caused an increase the interfacial width, yet further decreasing the GD to 50% and 20% reduced the interfacial width, as 80% of GD may efficiently increase the flexibility of blocks and promote interactions between homopolymers, while maintaining relatively high number of blocks attached to one molecule. The interfacial conformation of JBCPs was further translated into compatibilization efficiency. Thin film morphology studies showed that only the lower N BB values (N BB = 6 and N BB = 24) and the 80% GD of N BB = 100 had bicontinuous morphologies, due to a sufficient binding energy that arrested phase separation, supported by mechanical testing using asymmetric double cantilever beam (ADCB) tests. These provide fundamental insights into the assembly behavior of JBCPs compatibilizers at homopolymer interfaces, opening strategies for the design of new BCP compatibilizers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tricyclononenes and tricyclononadienes as efficient monomers for controlled ROMP: understanding structure–propagation rate relationships and enabling facile post-polymerization modification

Grubbs 3rd-generation (G3) pre-catalyst-initiated ring-opening metathesis polymerization (ROMP) remains an indispensable tool in the polymer chemist's toolbox. Tricyclononenes (TCN) and tricyclononadienes (TCND) represent under-explored classes of monomers for ROMP that have the potential to both advance fundamental knowledge (e.g., structure-polymerization kinetics relationships) and serve as practical tools for the polymer chemist (e.g., post-polymerization functionalization). In this work, a library of TCN and TCND imides, monoesters, and diesters, along with their exo-norbornene counterparts, were synthesized to compare their behaviors in G3-initiated ROMP. Real-time 1 H NMR was used to study their polymerization kinetics; propagation rates ( k p ) were extracted for each monomer. To understand the relationships between monomer structure and ROMP propagation rates, density functional theory methods were used to calculate a variety of electronic and steric parameters for each monomer. While electronic parameters (e.g., HOMO energy levels) correlated positively with the measured k p values, steric parameters generally gave improved correlations, which indicates that monomer size and shape are better predictors for k p than electronic parameters for this data set. Furthermore, the TCND diester—which contains an electron-deficient cyclobutene that is resistant to ROMP—and its polymer p(TCND) are shown to be highly reactive toward DBU-catalyzed conjugate addition reactions with thiols, providing a protecting- and activating-group free strategy for post-polymerization modification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unveiling the covalency of versatile Pu(iii)-N bonds in a unique plutonium(iii) complex

A trivalent plutonium–pyrazinyl–tetrazolate complex Na 2 [Pu(Hdtp)(dtp) 2 (H 2 O) 4 ]·9H 2 O (Pu_dtp, H 2 dtp = 2,3-di-1H-tetrazol-5-ylpyrazine) was synthesized through metathesis reaction of plutonium bromide and Na 2 (dtp)·2H 2 O in water. This structure is particularly notable among complexes formed by trivalent f-elements and the dtp 2− ligand in aqueous media. In contrast to other trivalent f-elements, including all Ln 3+ (with the exception of Pm 3+ ) and Cm 3+ , preferentially coordinated with eight water molecules rather than the nitrogen donors of the dtp 2− ligand, Pu 3+ exhibits a distinct affinity for nitrogen coordination. This observation provides strong evidence that the 5f electrons in Pu 3+ are more delocalized than other studied trivalent f-elements. In Pu_dtp, three distinct Pu(III)–N bonds are present: one Pu(III)–N5 from pyrazinyl, one Pu(III)–N4 from the least electronegative nitrogen in the tetrazolate, and three Pu(III)–N1/N2/N3 from the most electronegative nitrogens in the tetrazolate. Experimental Pu(III)–N bond lengths, Wiberg bond indices (WBI), natural localized molecular orbitals (NLMO), quantum theory of atoms in molecules (QTAIM), and energy decomposition analysis (EDA), reveal a covalency trend: Pu(III)–N from the most electronegative nitrogen in tetrazolate > Pu(III)–N from the least electronegative nitrogen in tetrazolate > Pu(III)–N from pyrazinyl. This trend arises from the increased negative charge on the most electronegative nitrogen atoms in the tetrazolate ring, enhancing electrostatic Pu–N1/N2/N3 interactions. These stronger electrostatic interactions lead to shorter bond lengths, thereby enhancing orbital overlap and greater covalency, compared to the less electronegative nitrogen in tetrazolate (Pu–N4) and the neutral pyrazinyl nitrogen (Pu–N5).

Bai, Zhuanling [Colorado School of Mines, Golden, ↗
DOE OSTI2025

Equilibrium-gated pattern formation: How molecular dissociation thermodynamics drive emergent behavior in dissipative polymeric systems

Emergent patterns in biological systems arise through dissipative processes that balance reaction and transport phenomena, producing highly functional properties from self-regulating mechanisms. Synthetic fabrication, by contrast, often relies on user-controlled, multistep methods that lack the self-organizing capabilities of natural systems. Inspired by nature, we sought chemical systems that integrate strongly coupled reaction and transport phenomena, identifying frontal ring-opening metathesis polymerization (FROMP) as a method capable of creating diverse forms and functions through reactive processing. By employing discrete molecular initiators, FROMP allows precise control of key reaction steps—inhibition, initiation, and propagation. Using an integrated computational and experimental framework, we uncover how near-equilibrium inhibition dynamics, coupled with far-from-equilibrium reaction kinetics, drive pattern formation in frontally polymerized synthetic materials. We propose the concept of equilibrium-gated pattern formation, demonstrating how initiator chemistry can be tuned to achieve programmable macroscale properties. Our study reveals a surprising insight: Emergent behavior in FROMP systems arises from the inhibition-dominated regime of resin composition, expanding prior observations that such behavior is confined to a narrow compositional space near the boundary between front quenching and uniform front propagation. We identify a broader compositional window, far from the quenching regime, where emergent behavior reliably manifests. This expanded design space significantly enhances the operational flexibility of reactive systems and their capacity for self-organization. Furthermore, these insights provide a roadmap for designing bioinspired materials with self-organizing capabilities, unlocking possibilities in synthetic manufacturing.

Architected Polymers↗
DOE OSTI2021

The intrinsic electrochemical behavior of layered Cu 2 WSe 4 nanoparticles

Nanoplates of Cu 2 WSe 4 (~50 nm) were synthesized via a hot-injection method by one-pot selenation of WCl 6 and Cu(acac) 2 . This synthetic route provided another perspective towards the intrinsic electrochemical properties of Cu 2 MSe 4 (M = Mo or W), where their nanoparticles were previously synthesized via a metathesis route. In conclusion, cations-dependent cathodic events and surface activation anodic events were identified by cyclic voltammetry in acetonitrile.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Vernier template synthesis of molecular knots

Molecular knots are often prepared using metal helicates to cross the strands. Here we found that coordinatively mismatching oligodentate ligands and metal ions provides a more effective way to synthesize larger knots using Vernier templating. Strands composed of different numbers of tridentate 2,6-pyridinedicarboxamide groups fold around nine-coordinate lanthanide (III) ions to generate strand-entangled complexes with the lowest common multiple of coordination sites for the ligand strands and metal ions. Ring-closing olefin metathesis then completes the knots. A 3:2 (ditopic strand:metal) Vernier assembly produces +3 1 #+3 1 and –3 1 #–3 1 granny knots. Vernier complexes of 3:4 (tetratopic strand:metal) stoichiometry selectively form a 378-atom-long trefoil-of-trefoils triskelion knot with 12 alternating strand crossings or, by using opposing stereochemistry at the terminus of the strand, an inverted-core triskelion knot with six alternating and six nonalternating strand crossings.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Chemically recyclable polyolefin-like multiblock polymers

Polyolefins are the most important and largest volume plastics produced. Unfortunately, the enormous use of plastics and lack of effective disposal or recycling options have created a plastic waste catastrophe. Here in this work, we report an approach to create chemically recyclable polyolefin-like materials with diverse mechanical properties through the construction of multiblock polymers from hard and soft oligomeric building blocks synthesized with ruthenium-mediated ring-opening metathesis polymerization of cyclooctenes. The multiblock polymers exhibit broad mechanical properties, spanning elastomers to plastomers to thermoplastics, while integrating a high melting transition temperature (T m ) and low glass transition temperature (T g ), making them suitable for use across diverse applications (T m as high as 128°C and T g as low as –60°C). After use, the different plastics can be combined and efficiently deconstructed back to the fundamental hard and soft building blocks for separation and repolymerization to realize a closed-loop recycling process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

FROMP-from-Monomer

This repository provides the 1D reaction-diffusion simulation engine for the multi-scale framework. It takes monomer-level kinetic and thermodynamic descriptors as inputs, approximated from quantum chemical calculations, to simulate and predict the macroscopic propagation behavior of Frontal Ring-Opening Metathesis Polymerization (FROMP). By solving a coupled 1D reaction-diffusion PDE system, this tool predicts front propagation speed, front temperature, and degree of conversion. The solver explicitly captures the three fundamental ROMP steps, initiator activation/inhibition, chain initiation, and propagation, while accounting for high-temperature cycloreversion as a competing pathway. The numerical implementation uses FEniCS to handle the coupled heat diffusion and reaction kinetics.

Chua, Lauren [Massachusetts Inst. of Technology (M↗
DOE OSTI2023

Modernist materials synthesis: Finding thermodynamic shortcuts with hyperdimensional chemistry

Synthesis remains a challenge for advancing materials science. A key focus of this challenge is how to enable selective synthesis, particularly as it pertains to metastable materials. This perspective addresses the question: how can “spectator” elements, such as those found in double ion exchange (metathesis) reactions, enable selective materials synthesis? By observing reaction pathways as they happen (in situ) and calculating their energetics using modern computational thermodynamics, we observe transient, crystalline intermediates that suggest that many reactions attain a local thermodynamic equilibrium dictated by local chemical potentials far before achieving a global equilibrium set by the average composition. Furthermore, using this knowledge, one can thermodynamically “shortcut” unfavorable intermediates by including additional elements beyond those of the desired target, providing access to a greater number of intermediates with advantageous energetics and selective phase nucleation. Ultimately, data-driven modeling that unites first-principles approaches with experimental insights will refine the accuracy of emerging predictive retrosynthetic models for complex materials synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Videos of Chemically Activated Frontal Polymerization of Thermosets

Video recordings of the frontal ring-opening metathesis polymerization (FROMP) of thermoset polymer specimens in 10mm glass test tubes were collected in order to measure the front speed resulting from varied front initiation methods. Maximum front temperature was also measured. Polymerization resins comprised of dicyclopentadiene (DCPD) with 5 wt% 5-ethylidene-2-norbornene (ENB) added, grubbs’ second generation catalyst, and tributyl phosphite (TBP) inhibitor (8000:1:1 monomer:initiator:inhibitor ratio). Polymerization fronts were triggered using concentrated solutions of grubbs’ third generation catalyst in various solvents.

Cramblitt, Anna C.↗