Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magnetic insulators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Magnetic properties of the double trillium lattice antiferromagnet KBaCr 2 ⁢(PO 4 ) 3

Trillium lattices formed by corner-shared triangular units are the platform for magnetic frustration in three dimensions. Herein, we report structural and magnetic properties of the Cr-based (S = 3/2) double trillium lattice material KBaCr 2 ⁢(PO 4 ) 3 studied by x-ray diffraction, dc and ac magnetization, heat capacity, thermal conductivity, and 31 P nuclear magnetic resonance (NMR) measurements complemented by density-functional band-structure calculations. Magnetization, heat capacity, and 31 P NMR measurements reveal the magnetic transition at T N⁢1 ≃ 12.5 K in zero field followed by another transition (T N⁢2 ) at low temperatures in weak applied fields. The 31 P spin-lattice relaxation rate in the ordered state follows the T 3 behavior indicative of the two-magnon Raman process. Finally, the spin lattice of KBaCr 2 ⁢(PO 4 ) 3 comprises two crystallographically nonequivalent ferromagnetic sublattices that are coupled antiferromagnetically, thus eliminating frustration in this trillium network and leading to weak ferromagnetism in the vicinity of T N⁢1 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Octupolar versus Néel Order in Cubic 5d 2 Double Perovskites

We report time-of-flight neutron spectroscopy and neutron and x-ray diffraction studies of the 5 d 2 double perovskite magnets, Ba 2 M OsO 6 ( M = Zn , Mg , Ca ). We find that these materials host antiferromagnetically coupled 5 d 2 Os 6 + ions decorating a face-centered cubic (fcc) lattice and are found to remain cubic down to the lowest temperatures. They all exhibit thermodynamic anomalies consistent with a single phase transition at a temperature T * , and a gapped magnetic excitation spectrum with spectral weight concentrated at wave vectors typical of type-I antiferromagnetic orders. However, while muon spin resonance experiments show clear evidence for time-reversal symmetry breaking below T * , we observe no corresponding magnetic Bragg scattering signal. These results are shown to be consistent with ferro-octupolar symmetry breaking below T * , and are discussed in the context of other 5 d double perovskite magnets and theories of exotic orders driven by multipolar interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Optimized in situ crystal growth and disordered quasi-one-dimensional magnetism in Li 2 Mn 2 ( MoO 4 ) 3

We present that the quasi-one-dimensional structure of Li 2 Mn 2 ( MoO 4 ) 3 consists of three mutually distinct chains of Li 1 - x Mn x -centered polyhedra in which Mn ostensibly adopts a J = 5 / 2 Mn 2 + configuration. In situ x-ray scattering experiments carried out as crystallites emerge from a molten oxide solution facilitate the synthesis of large single crystals. Ex situ x-ray diffraction finds no evidence of long-range Li/Mn occupancy ordering, suggesting that the structure is effectively composed of finite chains of Mn moments of statistically varying lengths. UV/visible diffuse reflectance spectroscopy measurements establish a wide 3.43(12)-eV direct charge gap consistent with the local polyhedral coordination of the nominally Mn 2 + species. The temperature T dependence of the DC magnetic susceptibility χ reveals a fluctuating moment of only 2.74 μ B ± 0.01 μ B /Mn, dramatically reduced from the 5.9 μ B /Mn expected for Mn 2 + . Meanwhile, the Weiss temperature Θ W = - 89 ± 1 K reveals antiferromagnetic fluctuations that are stymied from reaching an ordered state apparently by the chemical disorder intrinsic to the polyhedral chains. Measurements of magnetization vs field H at T ≤ 10 K are far from saturation even at H = 5 T and are strongly non-Brillouin-like, instead scaling as H / T 0.24 ( 3 ) and suggesting the presence of quantum fluctuations associated with an eventual quasi-one-dimensional, disordered magnetic phase.

1-dimensional systems↗
DOE OSTI2022

Temperature-induced valence-state transition in double perovskite Ba 2 - x Sr x TbIrO 6

In this paper, a temperature-induced valence-state transition is studied in a narrow composition range 0.2 ≤ x ≤ 0.375 of Ba 2 - x Sr x TbIrO 6 by means of x-ray and neutron powder diffraction, resonant inelastic x-ray scattering, magnetic susceptibility, electrical resistivity, and specific heat measurements. The valence-state transition involves an electron transfer between Tb and Ir leading to the valence-state change between Tb 3 + / Ir 5 + and Tb 4 + / Ir 4 + phases. This first-order transition has a dramatic effect on the lattice, transport properties, and the long-range magnetic order at low temperatures for both Tb and Ir ions. Ir 5 + ion has an electronic configuration of 5 d 4 ( J eff = 0 ), which is expected to be nonmagnetic. In contrast, Ir 4 + ion with a configuration of 5 d 5 ( J eff = 1/2) favors a long-range magnetic order. For x = 0.1 with Tb 3 + / Ir 5 + configuration to the lowest temperature (2 K) investigated in this paper, a spin-glass behavior is observed around 5 K indicating Ir 5 + ( J eff = 0 ) ions act as a spacer reducing the magnetic interactions between Tb 3 + ions. For x = 0.5 with Tb 4 + / Ir 4 + configuration below the highest temperature 400 K of this paper, a long-range antiferromagnetic order at T N = 40 K is observed highlighting the importance of Ir 4 + ( J eff = 1/2) ions in promoting the long-range magnetic order of both Tb and Ir ions. For 0.2 ≤ x ≤ 0.375, a temperature-induced valence-state transition from high-temperature Tb 3 + / Ir 5 + phase to low-temperature Tb 4 + / Ir 4 + phase occurs in the temperature range 180 K ≤ T ≤ 325 K and the transition temperature increases with x . The compositional dependence demonstrates the ability to tune the the valence state for a critical region of x that leads to a concurrent change in magnetism and structure. Furthermore, this tuning ability could be employed with suitable strain in thin films to act as a switch as the magnetism is manipulated.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spin disorder in a stacking polytype of a layered magnet

Strongly correlated ground states and exotic quasiparticle excitations in low-dimensional systems are central research topics in the solid-state research community. The present work develops a layered material and explores the physical properties. Single crystals of 3⁢R–Na 2 ⁢MnTe⁢O 6 were synthesized via a flux method. Single-crystal x-ray diffraction and transmission electron microscopy reveal a crystal structure with ABC-type stacking and an R–3 space group, which establishes this material as a stacking polytype to previously reported 2⁢H–Na 2 ⁢MnTe⁢O 6 . Magnetic- and heat-capacity measurements demonstrate dominant antiferromagnetic interactions, the absence of long-range magnetic order down to 0.5 K, and field-dependent short-range magnetic correlations. A structural transition at ~23 K observed in dielectric measurements may be related to displacements of the Na positions. In conclusion, our results demonstrate that 3⁢R–Na 2 ⁢MnTe⁢O 6 displays low-dimensional magnetism, disordered structure and spins, and the system displays a rich structure variety.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and magnetic properties of the Shastry-Sutherland family R 2 Be 2 SiO 7 ( R = Nd , Sm , Gd-Yb )

Compounds forming the quasi-two-dimensional Shastry-Sutherland lattice (SSL) have attracted significant experimental and theoretical attention in the field of frustrated magnetism. This is primarily due to their realization of an exactly soluble J 1 –J 2 orthogonal dimer model capable of hosting magnetic order, dimer singlet, and plaquette singlet phases in zero applied field and their complex magnetic phase diagrams with fractional magnetization plateaus and possible superfluid and supersolid phases found between the plateau states. The discovery and characterization of SSL compounds based on rare-earth magnetic ions provide a direct route to study the stability and properties of these exotic magnetic phases in systems with a variety of different magnetic anisotropies. In this paper, we discuss the synthesis and magnetic characterization of polycrystalline samples of the R 2 ⁢Be 2 ⁢SiO 7 family, where R=Nd, Sm, and Gd-Yb. All family members crystallize in the space group $P\bar{⁢4}⁢2_1⁢m$ (113) and show no signs of long-range magnetic order above 2 K, except for R=Tb which orders antiferromagnetically at 2.6 K.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Stacking disorder and thermal transport properties of α-RuCl 3

α-RuCl 3 , a well-known candidate material for Kitaev quantum spin liquid, is prone to stacking disorder due to the weak van der Waals bonding between the honeycomb layers. After a decade of intensive experimental and theoretical studies, the detailed correlation between stacking degree of freedom, structure transition, magnetic, and thermal transport properties remains unresolved. In this work, we reveal the effects of a small amount of stacking disorder inherent even in high quality α-RuCl 3 crystals. This small amount of stacking disorder results in the variation of the magnetic ordering temperature, and it suppresses the structure transition and thermal conductivity. Crystals with a minimal amount of stacking disorder have a T N > 7.4 K and exhibit a well-defined structure transition around 140 K upon cooling. For those with more stacking faults and a T N below 7 K, the structure transition occurs well below 140 K upon cooling and is incomplete, manifested by the diffuse streaks and the coexistence of both high-temperature and low-temperature phases down to the lowest measurement temperature. Both types of crystals exhibit oscillatory field-dependent thermal conductivity and a plateaulike feature in thermal Hall resistivity in the field-induced quantum spin liquid state. However, α-RuCl 3 crystals with a minimal amount of stacking disorder have a higher thermal conductivity that pushes the thermal Hall conductivity to be closer to the half-integer quantized value. Importantly, these findings demonstrate a strong correlation between layer stacking, structure transition, magnetic, and thermal transport properties, underscoring the importance of interlayer coupling in α-RuCl3 despite the weak van der Waals bonding.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interfacial magnetic characteristics of nearly compensated gadolinium iron garnet

Reports on spin Hall magnetoresistance, magnonic spin currents from thermal gradients, and spin transfertorque magnetic random-access memory using compensated ferrimagnets largely discuss bulk magnetization but lack consideration of depth profiles or interfacial characteristics. Here, magnetic and structural characterization of profiles and interfaces was performed for nearly compensated gadolinium iron garnet (GdIG) thin films. X-ray diffraction and reciprocal space maps show that sputter deposited GdIG on Si is polycrystalline with the desired cubic garnet phase, and GdIG on gadolinium gallium garnet (GGG) is epitaxial with <0.06% compressive strain. Temperature-dependent magnetometry confirms the compensation temperatures of GGG/GdIG and Si/GdIG to be 285 and 260 K, respectively, both near room temperature. Interestingly, these measurements suggest the presence of unsaturated rare-earth moments, which result in a characteristic hysteresis between heating and cooling sequences in the magnetization-temperature curves at zero field. Depth-profile measurements from polarized neutron reflectometry (PNR) indicate up to 91% volume fraction in GdIG on Si. At the interface, PNR reveals a region containing magnetized Fe-doped GGG, a low-density GdIG at the GGG/GdIG interface, and a thin magnetically dead layer at the Si/GdIG interface. Cross-sectional transmission electron microscopy and energy dispersive x-ray spectroscopy confirm the assessment of PNR. In conclusion, the magnetic characteristics of interfacial regions are attributed to intermixing of Fe-Ga at the GGG/GdIG interface and the presence of amorphous Fe-Si at the Si/GdIG interface.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Planar Thermal Hall Effect from Phonons in Cuprates

A surprising “planar” thermal Hall effect, whereby the field is parallel to the current, has recently been observed in a few magnetic insulators; this effect has been attributed to exotic excitations such as Majorana fermions or chiral magnons. Here, we investigate the possibility of a planar thermal Hall effect in three different cuprate materials, in which the conventional thermal Hall conductivity 𝜅 xy (with an out-of-plane field perpendicular to the current) is dominated by either electrons or phonons. Our measurements show that the planar 𝜅 xy from electrons in cuprates is zero, as expected from the absence of a Lorentz force in the planar configuration. By contrast, we observe a sizable planar 𝜅 xy in those samples where the thermal Hall response is due to phonons, even though it should, in principle, be forbidden by the high crystal symmetry. Our findings call for a careful reexamination of the mechanisms responsible for the phonon thermal Hall effect in insulators.

Cuprates↗
DOE OSTI2025

Single-Crystal Diffuse Neutron Scattering Study of the Dipole-Octupole Quantum Spin-Ice Candidate Ce 2⁢ Zr 2 ⁢O 7 : No Apparent Octupolar Correlations Above 𝑇 = 0.05 K

The insulating magnetic pyrochlore Ce 2 ⁢Zr 2 ⁢O 7 has gained attention as a quantum spin-ice candidate with dipole-octupole character that arises from the crystal-electric-field ground-state doublet for the Ce 3+ Kramers ion. This dipole-octupole character permits both spin-ice phases based on magnetic dipoles and those based on more-exotic octupoles. This work reports low-temperature neutron diffraction measurements on single-crystal Ce 2 ⁢Zr 2⁢ O 7 with 𝑄 coverage both at low 𝑄, where the magnetic form factor for dipoles is near maximal, and at high 𝑄, covering the region where the magnetic form factor for Ce 3+ octupoles is near maximal. This study was motivated by recent powder neutron diffraction studies of other Ce-based dipole-octupole pyrochlores, Ce 2 ⁢Sn 2 ⁢O 7 and Ce 2 ⁢Hf 2 ⁢O 7 , which each showed temperature-dependent diffuse diffraction at high 𝑄, interpreted as arising from octupolar correlations. Our measurements use an optimized single-crystal diffuse scattering instrument that allows us to screen against strong Bragg scattering from Ce 2 ⁢Zr 2 ⁢O 7 . The temperature-difference neutron diffraction reveals a low-𝑄 peak consistent with dipolar spin-ice correlations reported in previous work, and an alternation between positive and negative net intensity at higher 𝑄. These features are consistent with our numerical-linked-cluster calculations using pseudospin interaction parameters previously reported for Ce 2 ⁢Zr 2⁢ O 7 , Ce 2 ⁢Sn 2 ⁢O 7 , and Ce 2 ⁢Hf 2 ⁢O 7 . Importantly, neither the measured data nor any of the NLC calculations show evidence for increased scattering at high 𝑄 resulting from octupolar correlations. We conclude that at the lowest attainable temperature for our measurements (𝑇 = 0.05 K), scattering from octupolar correlations in Ce 2 ⁢Zr 2 ⁢O 7 is not present in the neutron diffraction signal on the level of our observation threshold of around 0.1% of the low-𝑄 dipole scattering. We compare these results to those obtained earlier on powder Ce 2 ⁢Sn 2 ⁢O 7 and Ce 2⁢ Hf 2⁢ O 7 , and to low-energy inelastic neutron scattering from single-crystal Ce 2 ⁢Zr 2 ⁢O 7 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetic dynamics in NiTiO 3 honeycomb antiferromagnet using neutron scattering

The ilmenite NiTiO 3 consists of a buckled honeycomb lattice, with the Ni spins aligned ferromagnetically in-plane and antiferromagnetically out-of-plane. Using neutron spectroscopy, the magnetic structure and the dynamics were investigated as a function of temperature. Dispersive acoustic bands and nearly dispersionless optical bands at ≈ 3.7 meV are described by a highly anisotropy Heisenberg model with stronger antiferromagnetic (AFM) out-of-plane, weaker ferromagnetic (FM) in-plane interactions and an anisotropy gap of 0.95 meV. Furthermore, the order parameter yields a critical exponent between the Heisenberg and two-dimensional Ising models, consistent with highly anisotropic Heisenberg systems. The frustration parameter ≈ 2 supports a weakly frustrated system.

Antiferromagnets↗
DOE OSTI2026

Evidence of Chiral Fermion Edge Modes through Geometric Engineering of Thermal Hall Effect in 𝛼−RuCl 3

The experimental observation of half-integer-quantized thermal Hall conductivity in the Kitaev candidate material α-RuCl 3 has served as a signature of non-Abelian anyons through an associated chiral Majorana edge mode. However, both the reproducibility of the quantized thermal Hall conductivity and the fundamental nature of the associated heat carriers, whether bosonic or fermionic, are subjects of ongoing and vigorous debate. In a recent theoretical work, it was proposed that varying the sample geometry through creating constrictions can distinguish between different origins of the thermal Hall effect in magnetic insulators. Here, in this study, we provide experimental evidence of chiral fermion edge modes by comparing the thermal Hall effect of a geometrically constricted α-RuCl 3 sample with that of an unconstricted sample. In contrast to the unconstricted crystals where the thermal Hall signal fades below 5 K, the constricted crystals display a significant thermal Hall signal that remains measurable even at 2 K. This sharp difference agrees well with the theoretical prediction and provides compelling evidence for the contribution of chiral fermion edge modes to the thermal Hall effect in α-RuCl 3 . More broadly, this work confirms that the geometry dependence of the thermal Hall effect can help identify chiral spin liquids in candidate materials like α-RuCl 3 and paves the way for the experimental realization of thermal anyon interferometry.

Zhang, Heda [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2026

Dynamics and thermodynamics of the 𝑆 = $\frac{5}{2}$ almost Heisenberg triangular lattice antiferromagnet K 2⁢ Mn⁢(SeO 3 ) 2

Here, we report calorimetric, magnetic, and neutron scattering studies on an 𝑆 = 5/2, nearly Heisenberg triangular-lattice antiferromagnet K 2 ⁢Mn⁢(SeO 3 ) 2 with weak XXZ easy-axis anisotropy. Multiple magnetic phases are identified, including a noncollinear Y phase in zero field, a field-induced collinear 𝑚 = 1/3 magnetization plateau, and a high-field V phase. In the Y phase, the magnetic excitation spectrum exhibits both single-magnon excitations and an extended high-energy continuum. Both features are well described by nonlinear spin wave theory. In the field-induced phases, complex effects of the spectrum renormalization even for large 𝑆 = 5/2 material are clearly detectable. These results underscore the essential role of magnon-magnon interactions in the dynamics of large-𝑆 Heisenberg spin systems on a triangular lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Power Flow Spectroscopy Diagnostics & Platform Development at the Z Pulsed Power Facility

Large pulsed power accelerators deliver multi-MJ pulses of electrical energy to a variety of high energy density (HED) physics experiments that support stockpile science programs. Understanding the plasma formation mechanisms and resulting electrical power transport (or "power flow") in the vacuum magnetically insulated transmission lines (MITLs) is an important area of ongoing research, and could provide a means to improve the performance of today's pulsed power accelerators while improving confidence in the design options for next-generation pulsed power concepts. Power flow science has been studied for decades, but these studies have not provided a predictive understanding of plasma formation and expansion in MITL systems. Several recent factors in pulsed power system design have generated a renewed (and urgent) interest in developing validated, multi-physics power flow engineering models with increased scrutiny and understanding. Examples of these factors include (i) the use of high inductance experimental configurations that could increase current "loss", (ii) interest in long-pulse applications that require predictable pulse shapes, and (iii) the desire to develop a deeper understanding of how current loss phenomena scale to larger accelerator configurations. This work is directed to support the validation of multi-physics power flow engineering models required to realize pulsed power systems for the NNSA mission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Dissertation Proposal: Innovations in Pulsed Power and Plasma Science Theory Simulation and Experiment

Pulsed power and plasma physics are topics of great study at both Sandia National Laboratories (SNL or Sandia) and the University of New Mexico (UNM). The goal of this research is to further knowledge and understanding of these fields using the resources of both SNL and UNM in three ways. The first way is through the comprehension, application, and testing of theory. Reading and analytically deriving theoretical solutions of problems both real-world and simplified will allow for a fresh perspective and the furthering of the theory. One such theory is Ottinger's generalized theory for voltage measurement in magnetically insulated transmission lines (MITLs). By working through the math, a deeper understanding of the theory is gained from which one may add more physically accurate and/or more detailed physics into the theory. Additionally, understanding the theory lays a good foundation from which one can analyze, test, and compare results to the theory in the following two ways that will advance the fields of pulsed power and plasma physics. The second way is through the modeling and simulation of real-world and simplified problems that utilize and test the afore mentioned theories. Theory can be applied to a simulation domain by using the unstructured time-domain electromagnetic (UTDEM) codes EMPHASIS and EMPIRE as well as the physical modeling software CUBIT, all of which were developed at SNL. Problems such as the modeling and design of the extended MITL on HERMES III, the understanding of space-charge-limited emission from vacuum cathodes, and the interaction between a relativistic electron beam and an ideal gas can all be modeled, simulated, and analyzed with this set of codes. Here the advantage is three-fold. Firstly, theory that describes our understanding of these problems can be put to the test and advanced through iterative simulation and analysis. Secondly, the understanding of these problems will have a positive impact on national security through the advancement of the technological capability of the United States of America. Thirdly, and not unrelated to the prior advantage, is the validation and verification of EMPIRE and EMPHASIS. This segues into the third way, which is through experiment and the comparison of experiment to simulated and theoretical results. Performing experimental comparisons completes the scientific method and grounds all of the work in reality. Being able to physically test theory and simulation is necessary for any real conclusions to be drawn. Another advantage for carrying out experimental work is to advance the physical testing capabilities of SNL. Several systems will be developed and tested through the course of this work that positively impact technological advancement of Sandia National Labs. Lastly, all of the above work will converge to yield a well-rounded perspective that ties the three categories of research together.

42 ENGINEERING↗
DOE OSTI2021

Imaging Electrons in Two Dimensional Materials (Final report)

Two-dimensional (2D) materials have extraordinary characteristics that offer promising new approaches for science and technology. Electrons in graphene can move ballistically through a sheet, even though it is only a single atom thick. And transition metal dichalcogenide materials can be cleaved into 2D flakes of all types – metals, semiconductors, insulators, magnetic materials, and superconductors. To benefit from these discoveries, the science needs to be understood to transform 2D materials into useful new devices and systems. The evolution in time of atomic scale graphene structures has been studied in time with a transmission electron microscope (TEM), and ballistic transport of electrons in graphene was been imaged using a cooled scanning probe microscope (SPM), as well as electron motion in MoS 2 . Graphene is only one atom thick but is extremely strong, creating the opportunity to fabricate atomic scale structures in the lateral direction. Using an atomic resolution TEM, a suspended sheet of graphene can be shaped by a Si impurity atom on its surface that acts like a chisel to open up apertures, one atom at a time. The electrons in the TEM provide both the chiseling energy and the ability to image the results. Electrons and holes in graphene form a new type of electronic system with conical conduction and valence bands that meet at the Dirac point, with no energy gap. For moderate densities, the carriers form a Fermi liquid with ballistic transport over micron-scale distances. Using a cooled SPM the cyclotron orbit of electrons in graphene has been imaged. In the magnetic focusing regime, electrons leaving a point contact circle around and leave from a second point contact when the cyclotron diameter is equal to the contact spacing. The paths of electrons are focused - they enter at different angles but converge again at the exiting contact. When the SPM tip knocks an electron out of its orbit, an imaging signal is created. The ballistic motion of carriers in graphene opens the way for ballistic devices that manipulate beams of electrons and holes. Our collaborator Gil-Ho Lee, in Philip Kim's group, created a collimating contact by placing zig-zag absorbers on either side of entering electrons. Our cooled SPM was used to image the electron beam and determine its 9-degree halfwidth. By changing the gate voltage, a collimated beam of holes was also created, opening the way for colliding beam experiments. Coherent beams of carriers are desirable for quantum information processing. Via Andreev reflection, superconducting contacts can covert Cooper pairs in a superconductor to an ingoing and outgoing electrons and holes. Using our cooled SPM, Andreev reflection was imaged from a superconducting contact on a graphene device. Magnetic focusing was used to create an incoming beam of electrons and an outgoing beam of holes, detected by a third point contact. The images show a clear transition from normal reflection above the superconducting transition temperature to Andreev reflection as the device is cooled. Transition metal dichalcogenides offer a wide array of materials that can be exfoliated into ultrathin 2D sheets. A cooled SPM can be used to detect quantum dots as well as to image electron flow. The tip charge capacitively couples to electrons on the dot, acting as a gate to tune the dot conductance. Coulomb blockade peaks appear as a bullseye pattern in an SPM image as the tip is raster scanned above the dot. This approach was used to detect quantum dots in a MoS 2 channel as the carrier density was reduced and electrons pooled in low energy points. Through our DOE supported research, cooled SPM imaging has proven to be a very useful tool to uncover the motion of electrons and holes in the new quantum materials graphene and MoS 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterization of the Redesigned Extended MITL for HERMES III

Modeling and simulation of the legacy HERMES III Magnetically Insulated Transmission Line (MITL) has been performed using EMPHASIS, an unstructured time-domain electromagnetic (UTDEM) particle-in-cell (PIC) simulation software. This design when used lost roughly half of its current before the pulse reached the load. The cause of the current loss in the MITL was found to be the vacuum impedance changes along the MITL. The MITL was then redesigned to maintain constant impedance and simulated in EMPHASIS once again. Following predicting simulation results, the new MITL was then built, installed, and tested, showing minimal current loss and good agreement with simulation and theoretical results, all of which are reported here. Additionally, an analysis of experimental voltage calculation techniques using cathode and anode currents is performed and compared to simulation results.

97 MATHEMATICS AND COMPUTING↗