Results for “machine learning optimization” — Page 10

NASA NTRSDate not supplied

Harmonized Sentinel-1 SAR Global River Geometry and Inundation Database

Satellite-based observations on river geometries are sporadic in time, space, or both. Most satellite-based surface water maps, river widths, water surface elevations (WSE), slopes, and bathymetry are asynchronized in time and space. The current configuration of satellites such as Sentinel-6 measured the WSE but is missing the river width, slopes, and depths. To advance hydrological sciences research, there is a need to produce a harmonized time series of river geometry data of non-SWOT satellites in partnership with the upcoming SWOT mission. The SWOT satellite will measure river width, height, and slope but missing river depth measurements in space and time. Further, none of these current satellites measure the WSE, river width, and slopes synchronously. In this work, we use the Sentinel-1 SAR satellite data archive from 2015 to the present to create a global river width and surface water database at the reach scale. A modified version of the Sentinel SAR surface water classification algorithm from ASF is used to quantify the surface water extent on the stream approximately every six days (at the equator) at 10m spatial resolution globally. This 10m water mask is fed into a workflow to quantify the river widths, surface water inundations, slopes, and synthetic bathymetry in SWORD (SWOT River Database) stream networks. A Satellite HAND is used to address the cloud obscured surface water observations using a trained machine learning algorithm. We use WSE derived from the Global Water Monitor from NASA GSFC, Hydroweb from LEGOS, and ICESat-2 to harmonize the WSE observation. And Landsat-8/9 and Sentinel-2 water observations to fill the gaps in the Sentinel-1 SAR database. We use Congo River Basin as a test case where we have more than 500 radar altimetry-based WSE, continuous series of Sentinel-1, ICESat-2, Landsat-8/9, and Sentinel-2 observations. A Congo River hydrologic model is used to generate the streamflow discharge. The satellite observed river reaches are assimilated with the stream flows computed by the routing models. And the downstream reaches in the river network without satellite observations get optimized for discharge/river geometry at each observation cycle. Our final product is a harmonized river geometry dataset (reach's water extent, WSE, slope, synthetic bathymetry) for Congo Basin's SWORD reaches.

Chandana Gangodagamage↗

NASA NTRSDate not supplied

Global 3D Data Visualization and Analysis Platform with Advanced Machine Learning Capabilities in Support of Lunar Exploration

Introduction: The science goals for NASA’s Artemis program include: a) Understanding the character and origin of lunar polar volatiles, b) Conducting experimental science in the lunar environment and c) Investigating and mitigating exploration risks. The permanently shadowed regions (PSRs) on the Lunar south pole are expected to host large quantities of water-ice and volatiles that are important for sustainable Lunar exploration. There are several missions such as onboard Korea Pathfinder Lunar Orbiter (KPLO: Korean name Danuri) with onboard ShadowCam camera, Astrobotic Peregrine Mission One [4], and other efforts underway to obtain high resolution topographic, minerals, volatiles and other information on the moon. We envision a need in immediate future for platforms to integrate these data sets, provide rendering and visualization capabilities in the context of a 3D Lunar globe for easier information access and analysis. NASA's Celestial Mapping System (CMS) is developed to address the need for 3D tools for planetary science investigations, mission planning, in-situ operations, in a 3D-first design constructed around a unified view of a planetary globe. At present CMS provides many critical functionalities that include: 1) equipment planning and optimized placement on Lunar surface 2) line-of-sight (LOS) analysis 3) powerful measurement tools based on 3D terrain with realistic 3D models to represent rovers, astronauts and equipment 4) visualization of derived mapping products (e.g. resource maps), and 5) a data engine for hosting new observations that are not available in other contemporary lunar data tools. Planetary Data Ingestion: CMS can consume and analyze data from locally hosted and external third party sources. It is compatible with Open Geospatial Consortium (OGC) data and file standards and currently integrates datasets from the Astrogeology Science Center of USGS. This includes global and local data acquired from NASA (LRO, Clementine, Lunar Orbiter) and JAXA (SELENE/Kaguya), with capability of integrating more datasets. In addition, users can specify other WMS-hosted data endpoints, which CMS can then query and stream data from automatically. To set-up an automated process for ingestion and accurate rendering, visualization and analysis of external 3rd party planetary datasets within CMS, we initiated the process of ingesting unique dataset of super-enhanced images of the permanently shadowed regions (PSRs) at the lunar poles which were produced by the Hyper-effective nOise Removal U-net Software (HORUS) tool. This tool was developed to enhance the extremely low-light images of the interior of PSRs and provide the ability to see within these regions at and discern surface features (i.e. boulders and craters) down to 3 meters in size. We focused on the Nobile region on the Lunar south pole, selected site for VIPER mission and stitched several images to create a high-resolution map within one of the PSR of Nobile crater. Figure 1 shows the dark PSR zone form the original NAC layer of LRO as the base layer (left image) and the illuminated areas within that crater (center) which was created by ingesting and merging several of HORUS generated images. At present we employ a semi-automated process to ensure spatial accuracy and merger of several overlapping zones. However, we are in the process of completely automating this process by employing AI based techniques that would rank, sort, and stack the images based on their information density. The georectification of the images would employ selected features. Analysis on Ingested Planetary Datasets: Once an external planetary data-set is successfully ingested, georectified and merged seamlessly as a data-layer; CMS’ numerous analysis tools can be used on this data. A Line of Sight (LOS) tool has been developed for CMS which analyzes terrain profiles and obstructions to determine visibility for remote observers. Figure 1 (right image) shows the viewshed analysis on the same PSR in the Nobile region. The yellow pin shows the observer location outside the PSR. The yellow area shows the visible part of PSR. The obstructed area with no visibility for the observer is shown in red. The Measurements tool allows the user to take area and distance measurements of features on the terrain using various shapes. Measurement type can be specified in a number of ways: Line, Path, Polygon, Circle, Ellipse, Square, Rectangle or Freehand. Once the shape is specified, elevation information can then be extracted along each of these shapes. Figure 2 (left) shows the measurements performed on a crater n illuminated PSR in Nobile region. The equipment placement tool allows the user to place a 3D equipment model at a desired location and analyze its coverage area. The equipment placement tool is coupled with LOS to determine the coverage. Figure 2 (right) shows an equipment placed on the Lunar terrain and it’s coverage area. The red rays are blocked sight lines and the green rays are non-obstructed sight lines with the cyan lines showing the point of intersection with the terrain. More details are provided in the video demonstrations in Reference 5. Overcoming Polar Distortions: 3D geospatial applications exhibit significant distortions in polar imagery due to several reasons: 1) distortions in the source imagery, 2) incompatible tessellation algorithms at the poles, and 3) map projections. We are leveraging new tessellation algorithms and reprojecting data using projections that are better suited for Lunar poles. The goal is to seamlessly switch to polar projections while maintaining 3D view and navigation.

Maps↗

NASA NTRSDate not supplied

Global 3D Data Visualization and Analysis Platform With Advanced Machine Learning Capabilities in Support of Lunar Exploration

Introduction: The science goals for NASA’s Artemis program include: a) Understanding the character and origin of lunar polar volatiles, b) Conducting experimental science in the lunar environment and c) Investigating and mitigating exploration risks [1]. The permanently shadowed regions (PSRs) on the Lunar south pole are expected to host large quantities of water-ice and volatiles that are important for sustainable Lunar exploration [2]. There are several missions such as onboard Korea Pathfinder Lunar Orbiter (KPLO: Korean name Danuri) with onboard ShadowCam camera [3], Astrobotic Peregrine Mission One [4], and other efforts underway to obtain high resolution topographic, minerals, volatiles and other information on the moon. We envision a need in immediate future for platforms to integrate these data sets, provide rendering and visualization capabilities in the context of a 3D Lunar globe for easier information access and analysis. NASA's Celestial Mapping System (CMS) [5] is developed to address the need for 3D tools for planetary science investigations, mission planning, in-situ operations, in a 3D-first design constructed around a unified view of a planetary globe. At present CMS provides many critical functionalities that include: 1) equipment planning and optimized placement on Lunar surface 2) line-of-sight (LOS) analysis 3) powerful measurement tools based on 3D terrain with realistic 3D models to represent rovers, astronauts and equipment 4) visualization of derived mapping products (e.g. resource maps), and 5) a data engine for hosting new observations that are not available in other contemporary lunar data tools [5, 7]. Planetary Data Ingestion: CMS can consume and analyze data from locally hosted and external third party sources. It is compatible with Open Geospatial Consortium (OGC) data and file standards and currently integrates datasets from the Astrogeology Science Center of USGS. This includes global and local data acquired from NASA (LRO, Clementine, Lunar Orbiter) and JAXA (SELENE/Kaguya), with capability of integrating more datasets. In addition, users can specify other WMS-hosted data endpoints, which CMS can then query and stream data from automatically. To set-up an automated process for ingestion and accurate rendering, visualization and analysis of external 3rd party planetary datasets within CMS, we initiated the process of ingesting unique dataset of super-enhanced images of the permanently shadowed regions (PSRs) at the lunar poles which were produced by the Hyper-effective nOise Removal U-net Software (HORUS) tool [8]. This tool was developed to enhance the extremely low-light images of the interior of PSRs and provide the ability to see within these regions at and discern surface features (i.e. boulders and craters) down to 3 meters in size. We focused on the Nobile region on the Lunar south pole, selected site for VIPER mission and stitched several images to create a high-resolution map within one of the PSR of Nobile crater. Figure 1 shows the dark PSR zone form the original NAC layer of LRO as the base layer (left image) and the illuminated areas within that crater (center) which was created by ingesting and merging several of HORUS generated images. At present we employ a semi-automated process to ensure spatial accuracy and merger of several overlapping zones. However, we are in the process of completely automating this process by employing AI based techniques that would rank, sort, and stack the images based on their information density. The georectification of the images would employ selected features. Analysis on Ingested Planetary Datasets: Once an external planetary data-set is successfully ingested, georectified and merged seamlessly as a data-layer; CMS’ numerous analysis tools can be used on this data. A Line of Sight (LOS) tool has been developed for CMS which analyzes terrain profiles and obstructions to determine visibility for remote observers [5,6]. Figure 1 (right image) shows the viewshed analysis on the same PSR in the Nobile region. The yellow pin shows the observer location outside the PSR. The yellow area shows the visible part of PSR. The obstructed area with no visibility for the observer is shown in red. The Measurements tool allows the user to take area and distance measurements of features on the terrain using various shapes. Measurement type can be specified in a number of ways: Line, Path, Polygon, Circle, Ellipse, Square, Rectangle or Freehand. Once the shape is specified, elevation information can then be extracted along each of these shapes. Figure 2 (left) shows the measurements performed on a crater n illuminated PSR in Nobile region. The equipment placement tool allows the user to place a 3D equipment model at a desired location and analyze its coverage area. The equipment placement tool is coupled with LOS to determine the coverage. Figure 2 (right) shows an equipment placed on the Lunar terrain and it’s coverage area. The red rays are blocked sight lines and the green rays are non-obstructed sight lines with the cyan lines showing the point of intersection with the terrain. More details are provided in the video demonstrations in Reference 5. Overcoming Polar Distortions: 3D geospatial applications exhibit significant distortions in polar imagery due to several reasons: 1) distortions in the source imagery, 2) incompatible tessellation algorithms at the poles, and 3) map projections. We are leveraging new tessellation algorithms and reprojecting data using projections that are better suited for Lunar poles. The goal is to seamlessly switch to polar projections while maintaining 3D view and navigation.

Maps↗

NASA NTRSDate not supplied

Transient Optimization for the Betterment of Turbine Electrified Energy Management

Gas turbine engine transients are associated with degraded compressor operability, which must be addressed by the engine control system and accounted for in the engine design. Failure to do so may result in events such as compressor stall/surge and combustor blow out. Transient operability concerns constrain the engine design and can result in sacrifices of efficiency and/or thrust responsiveness. The traditional approach to transient operability management is control logic that limits the fuel flow command. A companion paper presents a strategy for optimizing the transient fuel flow control logic taking into consideration transient operability and thrust responsiveness. The study covered here extends this idea to an electrified gas turbine engine that employs a power/energy management concept known as Turbine Electrified Energy Management (TEEM). TEEM uses an electric power system interfaced with the engine (hence the term ‘electrified gas turbine engine’) to further improve transient operability and alleviate associated design constraints. There can be costs associated with implementing TEEM in terms of power and energy requirements that impact the size of the electrical power system. However, the results of this study show that through optimization of the transient limit logic, power and energy requirements needed to implement TEEM can be significantly reduced. Among the conclusions that can be drawn from the results of the illustrative application covered herein are: (1) there is a reduction in the electric machine power requirement to manage operability during accelerations by 200 to 400 hp, and (2) power transfer from the low pressure spool (LPS) to the high pressure spool (HPS) is the most effective option for improving operability during decelerations, followed by the options of only injecting power on the HPS or only extracting power from the LPS.

transient↗

NASA NTRSDate not supplied

Transient Optimization for the Betterment of Turbine Electrified Energy Management

Gas turbine engine transients are associated with degraded compressor operability, which must be addressed by the engine control system and accounted for in the engine design. Failure to do so may result in events such as compressor stall/surge and combustor blow out. Transient operability concerns constrain the engine design and can result in sacrifices of efficiency and/or thrust responsiveness. The traditional approach to transient operability management is control logic that limits the fuel flow command. A companion paper presents a strategy for optimizing the transient fuel flow control logic taking into consideration transient operability and thrust responsiveness. The study covered here extends this idea to an electrified gas turbine engine that employs a power/energy management concept known as Turbine Electrified Energy Management (TEEM). TEEM uses an electric power system interfaced with the engine (hence the term ‘electrified gas turbine engine’) to further improve transient operability and alleviate associated design constraints. There can be costs associated with implementing TEEM in terms of power and energy requirements that impact the size of the electrical power system. However, the results of this study show that through optimization of the transient limit logic, power and energy requirements needed to implement TEEM can be significantly reduced. Among the conclusions that can be drawn from the results of the illustrative application covered herein are: (1) there is a reduction in the electric machine power requirement to manage operability during accelerations by 200 to 400 hp, and (2) power transfer from the low pressure spool (LPS) to the high pressure spool (HPS) is the most effective option for improving operability during decelerations, followed by the options of only injecting power on the HPS or only extracting power from the LPS.

transient↗

NASA NTRSDate not supplied

Datascope to Enable Earth Independent Medical Operations (EIMO)

BACKGROUND: NASA has amassed sixty years of knowledge and experience relevant to maintenance of crew health and performance in low earth orbit. The Apollo Program introduced the importance of ensuring progressively autonomous operational capability. Earth Independent Medical Operations (EIMO) will require a gradual shift in the balance of medical responsibility, management, and authority from terrestrial to space-based assets. Terrestrial assets will continue to be essential for pre-mission screening and planning in addition to maintenance of crew health and performance. However, new capabilities are needed to enable EIMO and the amount of data required to support these systems, and mitigate the impacts of data transmission delays and reduced bandwidth coupled with lack of cloud-like resources and on-board computing capacity that is currently unclear or operationally insufficient. OVERVIEW: The overall goal of EIMO is to develop artificial intelligence (AI)-based solutions to analyze crew health and performance data utilizing a clinical decision support system (CDSS) to provide crew medical officers (CMO) with the equivalent of real-time, on-board medical consults. The EIMO ecosystem is envisioned as a “system of systems” where embedded reference databases and real-time data streams from multiple input vectors continuously and seamlessly assess crew health and performance. EIMO will be designed to make recommendations to the CMO using multi-modal AI-based natural language processing and machine learning methods with interoperability to push/pull data within and between multiple vehicle and habitat architectures. DISCUSSION: Data flows and storage/retrieval capacity are severely constrained during space missions and the challenges will become even greater during exploration missions. Just as each past program from Mercury to the International Space Station (ISS) required rethinking the interaction between ground-based controllers and space-based crew, so too will future missions to the Moon and Mars. While the NASA High-Performance Spaceflight Computing Processor project aims to increase computational capacity by 100 times over current spaceflight computers, the projected deliverable still lags considerably behind what will be needed to enable an AI-driven CDSS. Restrictions in processing speed and data storage capacity, coupled with transmission bottlenecks and delays, necessitate definition and optimization of an integrated data architecture to enable a progressively autonomous medical capability.

Medical operations↗

NASA NTRS2023

Comparative Analysis of Empirical and Machine Learning Models for Chla Extraction Using Sentinel-2 and Landsat OLI Data: Opportunities, Limitations, and Challenges

Remote retrieval of near-surface chlorophyll-a (Chla) concentration in small inland waters is challenging due to substantial optical interferences of various water constituents and uncertainties in the atmospheric correction (AC) process. Although various algorithms have been developed to estimate Chla from moderate-resolution terrestrial missions (∼10–60 m), the production of both accurate distribution maps and time series of Chla has proven challenging, limiting the use of remote analyses for lake monitoring. Here, we develop a support vector regression (SVR) model, which uses satellite-derived remote-sensing reflectance spectra () from Sentinel-2 and Landsat-8 images as input for Chla retrieval in a representative eutrophic prairie lake, Buffalo Pound Lake (BPL), Saskatchewan, Canada. Validated against in situ Chla from seven ice-free seasons (N ∼ 200; 2014–2020), the SVR model outperformed both locally tuned, -fed empirical models (Normalized Difference Chlorophyll Index, 2- and 3-band, and OC3) and Mixture Density Networks (MDNs) by 15–65%, while exhibiting comparable performance to a locally trained MDN, with an error of ∼35%. Comparison of Chla retrieval models, AC processors (iCOR, ACOLITE), and radiometric products (Rayleigh-corrected, surface, and top-of-atmosphere reflectance) showed that the best Chla maps and optimal time series (up to 100 mg m−3) were produced using a coupled SVR-iCOR system.

algal blooms↗

NASA NTRSDate not supplied

Towards an Aviation Large Language Model by Fine-tuning and Evaluating Transformers

In the aviation domain, there are many applications for machine learning and artificial intelligence tools that utilize natural language. For example, there is a desire to know the commonalities in written safety reports such as voluntary post incidents reports or create more accurate transcripts of air traffic management conversations. Another use-case is the possibility of extracting airspace procedures and constraints currently written in documents such as Letters of Agreement (LOA) which is used as the evaluation case in this paper. These applications can benefit from the use of state-of-the-art Natural Language Processing (NLP) techniques when adapted to the language/phraseology specific to the aviation domain. This paper evaluates the viability of transferring pre-trained large language models to the aviation domain by adapting transformer based models using aviation datasets. This paper utilized two datasets to adapt a ‘Robustly Optimized Bidirectional Encoder Representations from Transformers Approach’ (RoBERTa) model and two down-stream classification tasks to assess its performance. These datasets are all built upon Letters of Agreement which are Federal Aviation Administration (FAA) documents that formalize airspace operations across the national airspace system. The first two datasets are used for the adaptation of RoBERTa to the aviation domain and were of different sizes to assess the number of documents needed to adapt to the aviation domain. They contain many examples of ‘aviation English’ using domain specific terminology and phrasing which serves as a representative basis to perform the unsupervised adaptation. The second dataset is a separate set of LOA documents with two sets of classification labels to be used for evaluation; one at the document level and one at the line level. These down-stream evaluations allowed the measurement of improvement by adapting RoBERTa. The accuracy increased by 4-6% on both tasks and the F1 score on the class of interest increased by 4-8% from the adaptation.

Air Traffic Management↗

NASA NTRSDate not supplied

Towards an Aviation Large Language Model by Fine-tuning and Evaluating Transformers

In the aviation domain, there are many applications for machine learning and artificial intelligence tools that utilize natural language. For example, there is a desire to know the commonalities in written safety reports such as voluntary post incidents reports or create more accurate transcripts of air traffic management conversations. Another use-case is the possibility of extracting airspace procedures and constraints currently written in documents such as Letters of Agreement (LOA) which is used as the evaluation case in this paper. These applications can benefit from the use of state-of-the-art Natural Language Processing (NLP) techniques when adapted to the language/phraseology specific to the aviation domain. This paper evaluates the viability of transferring pre-trained large language models to the aviation domain by adapting transformer based models using aviation datasets. This paper utilized two datasets to adapt a ‘Robustly Optimized Bidirectional Encoder Representations from Transformers Approach’ (RoBERTa) model and two down-stream classification tasks to assess its performance. These datasets are all built upon Letters of Agreement which are Federal Aviation Administration (FAA) documents that formalize airspace operations across the national airspace system. The first two datasets are used for the adaptation of RoBERTa to the aviation domain and were of different sizes to assess the number of documents needed to adapt to the aviation domain. They contain many examples of ‘aviation English’ using domain specific terminology and phrasing which serves as a representative basis to perform the unsupervised adaptation. The second dataset is a separate set of LOA documents with two sets of classification labels to be used for evaluation; one at the document level and one at the line level. These down-stream evaluations allowed the measurement of improvement by adapting RoBERTa. The accuracy increased by 4-6% on both tasks and the F1 score on the class of interest increased by 4-8% from the adaptation.

Air Traffic Management↗

NASA NTRS2010

Testing of Haar-Like Feature in Region of Interest Detection for Automated Target Recognition (ATR) System

The objectives of this project were to develop a ROI (Region of Interest) detector using Haar-like feature similar to the face detection in Intel's OpenCV library, implement it in Matlab code, and test the performance of the new ROI detector against the existing ROI detector that uses Optimal Trade-off Maximum Average Correlation Height filter (OTMACH). The ROI detector included 3 parts: 1, Automated Haar-like feature selection in finding a small set of the most relevant Haar-like features for detecting ROIs that contained a target. 2, Having the small set of Haar-like features from the last step, a neural network needed to be trained to recognize ROIs with targets by taking the Haar-like features as inputs. 3, using the trained neural network from the last step, a filtering method needed to be developed to process the neural network responses into a small set of regions of interests. This needed to be coded in Matlab. All the 3 parts needed to be coded in Matlab. The parameters in the detector needed to be trained by machine learning and tested with specific datasets. Since OpenCV library and Haar-like feature were not available in Matlab, the Haar-like feature calculation needed to be implemented in Matlab. The codes for Adaptive Boosting and max/min filters in Matlab could to be found from the Internet but needed to be integrated to serve the purpose of this project. The performance of the new detector was tested by comparing the accuracy and the speed of the new detector against the existing OTMACH detector. The speed was referred as the average speed to find the regions of interests in an image. The accuracy was measured by the number of false positives (false alarms) at the same detection rate between the two detectors.

neural network↗

NASA NTRSDate not supplied

Enhancing Long-Term Trend Simulation of OH Through the Synergy of Model Simulations and Aura Ozone Monitoring Instrument (OMI) NO 2 and HCHO Retrievals

During the last few years, tremendous progress has been made to develop an efficient parameterization module using agile machine learning techniques. The aim of this module is to provide dynamic response of the tropospheric hydroxyl radical (OH) to its major drivers, including trace gases, aerosols, clouds, and meteorology. This module, named ECCOH (pronounced “echo”) and implemented in NASA’s GEOS-5 global model, offers an unrealized opportunity to unravel the convoluted response of OH to its underlying drivers while approaching the accuracy of full-chemistry without incurring excessive computational costs, making it suitable for climate models. However, the accurate representation of OH in ECCOH poses challenges due to the lack of representation of some of its critical inputs such as the abundance of NO 2 and HCHO concentrations. As such, we leverage the well-characterized satellite observations of NO2 and HCHO columns from Aura OMI to enhance their representation in ECCOH using an optimal interpolation method for the time period of 2005 - present. We show how the inclusion of OMI information can affect the spatiotemporal variability and long-term trends of OH, CO, and CH 4 across the globe. Additionally, we underscore the necessity of obtaining high-fidelity information regarding tropospheric ozone from the southern hemisphere from space, a region currently lacking full verification in models, posing a challenge to get a reasonable amount of chemical sink for CH 4 .

OH↗

NASA NTRS2023

Transient Optimization for the Betterment of Turbine Electrified Energy Management

Gas turbine engine transients are associated with degraded compressor operability, which must be addressed by the engine control system and accounted for in the engine design. Failure to do so may result in events such as compressor stall/surge and combustor blow out. Transient operability concerns constrain the engine design and can result in sacrifices of efficiency and/or thrust responsiveness. The traditional approach to transient operability management is control logic that limits the fuel flow command. A companion paper presents a strategy for optimizing the transient fuel flow control logic taking into consideration transient operability and thrust responsiveness. The study covered here extends this idea to an electrified gas turbine engine that employs a power/energy management concept known as Turbine Electrified Energy Management (TEEM). TEEM uses an electric power system interfaced with the engine (hence the term ‘electrified gas turbine engine’) to further improve transient operability and alleviate associated design constraints. There can be costs associated with implementing TEEM in terms of power and energy requirements that impact the size of the electrical power system. However, the results of this study show that through optimization of the transient limit logic, power and energy requirements needed to implement TEEM can be significantly reduced. Among the conclusions that can be drawn from the results of the illustrative application covered herein are: (1) there is a reduction in the electric machine power requirement to manage operability during accelerations by 200 to 400 hp, and (2) power transfer from the low pressure spool (LPS) to the high pressure spool (HPS) is the most effective option for improving operability during decelerations, followed by the options of only injecting power on the HPS or only extracting power from the LPS.

Turbine Electrified Energy Management↗

NASA NTRSDate not supplied

Flight Trajectory Prediction Based on Hybrid-Recurrent Networks

The development of future technologies for the National Airspace System (NAS) will be reliant on a new communications infrastructure capable of managing the limited available spectrum for communications among aircraft and ground systems. Emerging approaches to autonomous allocation of aviation spectrum mostlyrely on machine learning techniques, where 4D (longitude, latitude, altitude, time) trajectory prediction is an important data input to enable real-time resource allocation. This study explores and evaluates effective data sources and deep recurrent neural network techniques when determining flight trajectories. Specifically, data are collected and evaluated in a 100-day and 14-day period. Sources of data include NASA Sherlock Data Warehouse, MIT Lincoln Labs Corridor Integrated Weather Service (CIWS), and assorted NOAA weather datasets. Deep learning models for 4D predictions all utilize a hybrid-recurrent technique. A baseline model is considered via the convolutional-LSTM design from the existing literature. The modified design considers Gated Recurrent Units (GRU), Independently Recurrent Neural Networks (IndRNN), and stand-alone self-attention layers. Results indicatethe effectiveness of LSTM and GRUcells for state-of-the-art data processing (interpolation). Additionally, GRUs may be quickly trained with limited data, allowing for exacting improvements with optimizer selection. Attention mechanisms provide notable performance improvements to convolutional layers and may extend dimensional capabilities of a learning model. Finally, NOAA measurements provide only a supplemental value, requiring support from tailored measurements for Air Traffic Management.

Nathan Schimpf↗

NASA NTRSDate not supplied

Machine-learning Solution for Automatic Spacesuit Motion Recognition and Measurement from Conventional Video

Extravehicular Activity (EVA) spacesuits exhibit unique movement patterns due to their design characteristics. Mobility assessments using traditional motion capture systems are cost prohibitive and not feasible for some training conditions (e.g., simulated lunar outdoor terrain). This paper aims to present the ongoing development of machine learning solutions to quantify suit motions from conventional videos without special sensors or hardware. Preliminary work into this field was promising but given the fast growth in deep/machine learning technologies, external expertise was sought from open-source communities. Partnerships were formed with the NASA JSC Center of Excellence for Collaborative Innovation (CoCEI) and an execution crowdsourcing platform partner to solicit machine learning framework developments from external contenders. NASA provided contenders with images and video clips of spacesuits with simultaneously measured motion capture data during EVA simulation tasks. The contenders used this data to train and develop generalized algorithms to predict motions. At the end of the crowdsourcing event, the top five solutions were selected from 250 submissions. Each submission was tested and scored using video clips not previously disclosed to the contenders. The weighted scoring metrics measured how well the algorithm detected the suit shape, the 2D suit joint detection accuracy, and 3D joint detection accuracy. The winning solution was able to achieve roughly 85% prediction accuracy. Overall, the algorithms could efficiently detect various types of spacesuits and motions across different EVA environments such as the NASA Active Response Gravity Offload System (ARGOS). After continued improvements and validation, the fully developed system will enable EVA stakeholders to quantify suit kinematic patterns, which can help optimize suit, hardware, and task designs.

Linh Vu↗

NASA NTRSDate not supplied

Enabling Interoperability in Earth System Digital Twins (ESDT): Integrating Observations, Models, and AI for Actionable Insights Through NASA'S Intelligent Systems Technology Program

NASA’s Intelligent Systems Technology Program (IST) is driving a paradigm shift in Earth science through the development of Earth System Digital Twins (ESDT). These integrated information systems create a dynamic "digital replica" of the Earth by harmonizing continuous, multi-source observations with high-fidelity models and state-of-the-art artificial intelligence (AI) that enable “What now?”, “What next?”, and “What if?” scenario building. These scenarios are reflected in NASA IST’s series of ESDTs, from the Coastal Zone Digital Twin that integrates complex data on the current state of the Chesapeake Bay to the Terrestrial Environmental Rapid-Replication and Assimilation Hydrometeorological (TerraHydro) AI-based ESDT that forecasts water movement across Earth’s surface, to the Agriculture Land Information System (AgLIS) which can be used to assess optimal planting dates and crop yield estimates. By bridging the gap between vast data archives and actionable insights, these projects enable a system-of-systems approach to understanding complex, interacting Earth processes. This poster will highlight recent innovations and future directions from NASA’s ESDT initiatives: Continuous Data Assimilation & Multi-Source Fusion. A core requirement of the ESDT work is the transition from static models to dynamic "living" replicas. This involves creating frameworks for the continual assimilation of near-real-time data from uncoordinated, heterogeneous sources, including satellite observations and airborne assets, and ground-based Internet of Things (IoT) sensors. These systems link design, operational status, and environmental data, ensuring the digital twin accurately reflects the current state of the physical Earth system. High-Fidelity Hybrid Modeling & Computational Acceleration to enable interactive "what-if" explorations, programs are moving beyond traditional, slow physical solvers by developing fast surrogate machine learning models and Deep Generative Models (DGMs). These hybrid approaches use neural networks to emulate complex physics, such as cloud feedback or ocean dynamics, at a fraction of the original computing cost, often leveraging advanced hardware like Graphics Processing Units (GPUs) to achieve the necessary scale. Federated Ecosystems & Interoperable Frameworks rather than building isolated tools, NASA IST is moving toward federated ESDTs and reusable analytic collaborative frameworks. This theme focuses on interoperability standards and common ontologies that allow specialized digital twins to interact and share data. This system-of-systems architecture supports multi-discipline investigations, such as analyzing how upstream watershed changes impact downstream urban flooding or how wildfire emissions affect regional air quality. By leveraging these advancements, ESDTs empower researchers and decision-makers to conduct real-time analysis and run complex hypothetical scenarios, ultimately improving our understanding of Earth’s evolving systems and informing critical real-world applications.

Earth System↗

NASA NTRS2017

Classification of Wildfires from MODIS Data Using Neural Networks

Wildfires are destructive to both life and property, which necessitates an approach to quickly and autonomously detect these events from orbital observatories. This talk will introduce a neural network based approach for classifying wildfires in MODIS multispectral data, and will show how it could be applied to a constellation of low-cost CubeSats. The approach combines training a deep neural network on the ground using high performance consumer GPUs, with a highly optimized inference system running on a flight-proven embedded processor. Normally neural networks execute on hardware orders of magnitude more powerful than anything found in a space-based computer, therefore the inference system is designed to be performance even on the most modest of platforms. This implementation is able to be significantly more accurate than previous neural network implementations, while also approaching the accuracy of the state-of-the-art MODFIRE data products.

Artificial Intelligence↗

NASA NTRSDate not supplied

Spectral Mass-Gauging of Propellant Tanks

An overview of our recent results on the development of Spectral Mass-Gauging (SMG) technology for model-free gauging of propellants in microgravity applications will be presented. The technology is based on application a rigorous result from spectral theory – the Weyl’s Law – which relates the counting function of natural modes in a resonator with its volume. Development of the SMG includes theory of acoustic response of propellant tank, hardware and procedure characterization and optimization, development of data pre-processing approaches and software for automatic mode identification and counting. Main accomplishments in each field of the technology development will be presented. SMG has been tested recently in 1-g on a flight tank filled with water or LN2. We will present results of the tests and discuss their implications for the technology development. The presentation will conclude with a summary of the next steps in the technology maturation.

Mass-gauging↗

NASA NTRS2020

Genetic Algorithm for Optimization of Neural Networks for Bayesian Inference of Model Uncertainty

The objective of this work was to develop a genetic optimization algorithm that can design a neural network capable of producing uncertainty estimates along with predictions. This algorithm is necessary because the inclusion of uncertainty modeling in a neural network greatly complicates the network’s design space, making the development of a converging model extremely difficult and time consuming. The genetic algorithm presented in this work uses a number of value ranges for various configurable neural network parameters to create a randomly generated population of network architectures. The initially generated population is then evolved over the course of several generations, with the best performing models breeding to produce novel network configurations. Mutations are randomly applied to the network designs to facilitate the development of adaptations beneficial to the task being performed. An experiment was conducted to validate the proposed algorithm, in which the genetic optimizer was tasked with producing a neural network capable of predicting the sound pressure level (SPL) resulting from jet-surface interaction (JSI) noise. The data used for this task was generated at the NASA Glenn Research Center in the Aero-Acoustic Propulsion Laboratory. Starting with an initial population size of 35 randomly generated networks, and evolved over the course of 10 generations, the genetic algorithm produced a design able to predict SPL as a result of JSI noise within 0.272 dB, on average.

Genetic algorithm↗