Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lunar structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Analytical modeling of structure-soil systems for lunar bases

The study of the behavior of granular materials in a reduced gravity environment and under low effective stresses became a subject of great interest in the mid 1960's when NASA's Surveyor missions to the Moon began the first extraterrestrial investigation and it was found that Lunar soils exhibited properties quite unlike those on Earth. This subject gained interest during the years of the Apollo missions and more recently due to NASA's plans for future exploration and colonization of Moon and Mars. It has since been clear that a good understanding of the mechanical properties of granular materials under reduced gravity and at low effective stress levels is of paramount importance for the design and construction of surface and buried structures on these bodies. In order to achieve such an understanding it is desirable to develop a set of constitutive equations that describes the response of such materials as they are subjected to tractions and displacements. This presentation examines issues associated with conducting experiments on highly nonlinear granular materials under high and low effective stresses. The friction and dilatancy properties which affect the behavior of granular soils with low cohesion values are assessed. In order to simulate the highly nonlinear strength and stress-strain behavior of soils at low as well as high effective stresses, a versatile isotropic, pressure sensitive, third stress invariant dependent, cone-cap elasto-plastic constitutive model was proposed. The integration of the constitutive relations is performed via a fully implicit Backward Euler technique known as the Closest Point Projection Method. The model was implemented into a finite element code in order to study nonlinear boundary value problems associated with homogeneous as well as nonhomogeneous deformations at low as well as high effective stresses. The effect of gravity (self-weight) on the stress-strain-strength response of these materials is evaluated. The calibration of the model is performed via three techniques: (1) physical identification, (2) optimized calibration at the constitutive level, and (3) optimized calibration at the finite element level (Inverse Identification). Activities are summarized in graphic and outline form.

Macari-Pasqualino, Jose Emir↗

Systems engineering studies of lunar base construction

Many ingenious concepts have been proposed for lunar base construction, but few systematic studies exist which relate time-consistent lunar base construction technologies and the choice of lunar base approach with the long-term SEI objectives - i.e., lunar indigenous base construction and Mars Exploration equipment development. To fill this gap, CSC has taken a two-pronged approach. First, the Center undertook basic geotechnical investigations of lunar soil, fabrication of a scale prototype of a lunar construction crane, a multi-robot construction team laboratory experiment, and a preliminary design of lunar base structures. Second, during Jun. and Jul. 1991 two lunar base construction systems engineering studies were accomplished - a 'near term lunar base' study, and a 'far-term lunar base' study. The goals of these studies were to define the major lunar base construction research problems in consistent technology/construction frameworks, and to define design requirements for construction equipment such as a lunar crane and a regolith mover. The 'near-term lunar base' study examined three different construction concepts for a lunar base comprised of pre-fabricated, pre-tested, Space Station Freedom-type modules, which would be covered with regolith shielding. Concept A used a lunar crane for unloading and transportation; concept B, a winch and cart; and concept C, a walker to move the modules from the landing site to the base site and assemble them. To evaluate the merits of each approach, calculations were made of mass efficiency measure, source mass, reliability, far-term base mass, Mars base mass, and base assembly time. The model thus established was also used to define the requirements for crane speed and regolith mover m(sup 3)/sec rates. A major problem addressed is how to 'mine' the regolith and stack it over the habitats as shielding. To identify when the cost of using indigenous lunar materials to construct the base exceeds the cost of development and delivery of the equipment for processing lunar materials, a study of construction of a candidate sintered regolith 'far term lunar base' was undertaken. A technique was devised for casting slabs of sintered (basaltic) regolith and assembling these into a hemispherical (or geodesic) dome. The major problem occurs with the inner liner. At 14.7 psi and 20 percent oxygen internal atmosphere, the entire structure is in tension, even with the regolith load. Also, another study has indicated that at 14.7 psi major resupply of air will be needed because of leakage, and astronauts may have to engage in extensive pre-breathing and post-breathing for extravehicular activity (EVA) tasks, thus detracting from useful mission work time. An alternative is to operate part of the base at, say, 5 psi and 70 percent oxygen, or to equip the astronauts with hard suits at 8.3 psi or greater. All of these choices directly influence base design and construction techniques.

Morgenthaler, George W.↗

Velocity structure of the shallow lunar crust

Data from the thumper shots of the Apollo 14 and Apollo 16 active seismic experiments, testing whether the velocity variation in the shallow lunar crust (depths less than or equal to 10 m) can be represented by a self-compacting-power-layer or by a constant-velocity-layer model, are analyzed. Although filtering and stacking improved the S/N ratios, it was found that measuring the arrival times or amplitudes of arrivals beyond 32 m was not possible. The data quality precluded a definitive distinction between the power-law velocity variation and the layered-velocity model. Furthermore, it was found that the shallow lunar regolith is made up of fine particles, which supports the idea of a 1/6 power-velocity model. Analysis of the amplitudes of first arrivals revealed large errors in the data due to variations in the geophone sensitivities and shot strengths; a least-squares method, that uses data redundancy was employed to eliminate them.

Gangi, A. F.↗

X-ray structural study of chrome-aluminum lunar spinel from the Sea of Fertility

An X-ray structural study was made of a lunar spinel sample from the Sea of Fertility. The chemical composition and distribution of cations in the structure were characterized. Interpretation of the experimental data by the least squares method yielded the oxygen parameter u = 0.261 and the isotropic temperature factor 1.09 AU squared.

Nozik, Y. Z.↗

The moon's surface.

Lunar surface structure and formation, discussing impact craters, interplanetary collisions, volcanic traces, lunar soil, etc

Opik, E. J.↗

Structure, composition, and properties of lunar crust.

Lunar seismic data from three Apollo seismometers are interpreted to determine the structure of the moon's interior to a depth of about 100 km. The travel times and amplitudes of P and S arrivals from Saturn IV-B and LM impacts are interpreted in terms of a velocity profile. The most outstanding feature of the model is that, in the Fra Mauro region of Oceanus Procellarum, the moon has a 65 km-thick layered crust. Other features of the model are: (1) rapid increase of velocity near the surface due to pressure effects on dry rocks, (2) a discontinuity at a depth of about 25 km, (3) near-constant velocities between 25 and 65 km deep, (4) a major discontinuity at 65 km marking the base of the lunar crust, and (5) very high apparent velocities (about 9 km/sec for P waves) in the lunar mantle below the crust.

Toksoz, M. N.↗

The moon

Analyses of lunar samples and lunar meteorites and theoretical models of lunar morphology and evolution are discussed, reviewing results published during the period 1983-1986. Topics examined include the collisional ejection hypothesis for the origin of the moon, lunar meteorites from Antarctica, mare basalts, igneous and polymict rocks of the lunar-highlands crust, seismic structure and the lunar interior, and lunar regolith. Proposals for a manned base on the moon and a lunar polar orbiter (the Lunar Geoscience Observer) are briefly considered.

Ryder, Graham↗

NASA/ASEE Summer Faculty Fellowship Program, 1990, volume 2

The 1990 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston-University Park and Johnson Space Centers (JSC). A compilation of the final reports on the research projects is presented. The following topics are covered: the Space Shuttle; the Space Station; lunar exploration; mars exploration; spacecraft power supplies; mars rover vehicle; mission planning for the Space Exploration Initiative; instrument calibration standards; a lunar oxygen production plant; optical filters for a hybrid vision system; dynamic structural analysis; lunar bases; pharmacodynamics of scopolamine; planetary spacecraft cost modeling; and others.

Bannerot, Richard B.↗

The Thermal Hogan - A Means of Surviving the Lunar Night

document describes the Thermal Hogan, a new shelter concept that would be used on the Moon to moderate the extreme nighttime temperatures, allowing survival of equipment with minimal heater power. It is lightweight, has few mechanical parts, and would be relatively easy to deploy on the Moon. The Lunar Hogan has two parts: an insulated shelter and a thermal mass. The shelter is constructed of multilayer insulation (MLI) draped over a structural framework. Entry and egress are accomplished either by raising the structure or via a door constructed of the same MLI material as the shelter. The thermal mass can be manufactured from locally available materials, either by piling substantially sized rocks to a depth of 0.25 meter, or by filling a 0.25-meter-deep conductive honeycomb-like structure with lunar dust. For ease of transport, the structural framework and honeycomb can be collapsible. The door can be opened by pushing on it in either direction. Gravity would cause it to close and it could be sealed via magnetic strips on the doorframe.

Fruitwala, Neelay↗

Dusty plasma sheath-like structure in the region of lunar terminator

The main properties of the dusty plasma layer near the surface over the illuminated and dark parts of the Moon are described. They are used to realize dusty plasma behaviour and to determine electric fields over the terminator region. Possibility of the existence of a dusty plasma sheath-like structure in the region of lunar terminator is shown. The electric fields excited in the terminator region are demonstrated to be on the order of 300 V/m. These electric fields can result in rise of dust particles of the size of 2–3 μm up to an altitude of about 30 cm over the lunar surface that explains the effect of “horizon glow” observed at the terminator by Surveyor lunar lander.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Constraints on the Lunar Interior Through Comparison of Observed Apollo Seismic Travel Time With Simulated Lunar Interiors

Understanding the current state of the lunar interior is key to evaluating its formation history and evolution. The analyses of seismic waves recorded by 5 years of the Apollo passive seismic network, from 1972-1977, have provided some fundamental constraints on the lunar interior structure. Here, we show that comparisons between (a) calculated seismic velocities of simulated lunar interiors and (b) measured Apollo seismic velocities can resolve new solutions. Specifically, we show that comparison of seismic travel times can be used to constrain the lower bound of possible selenotherms.

Moon↗

An assessment of crustal thickness variations on the lunar near side - Models, uncertainties, and implications for crustal differentiation

The paper presents a series of models for the structure of lunar nearside crust which are consistent with the observed gravity and topography. Each crustal model is derived subject to a specific set of constraints and assumptions. The assumptions/constraints considered include strict isostatic equilibrium, pure Airy compensation mechanism, pure Pratt compensation mechanism, assignment of assumed fixed values for mare basalt thickness, and attribution of all superisostatic mass in the maria to basalt fill. The resulting models are used to assess the degree and mechanism of isostasy, and to investigate the thickness of the mare basalt. Details of the lateral variations in crustal thickness or density and in the degree of isostatic compensation bear strongly on the mode of early crustal differentiation and on the subsequent thermal history of the moon.

Thurber, C. H.↗