SEARCH · Engineering Papers

Results for “loss factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Geometric factors affecting noise suppresion and thrust loss of divergent-lobe supersonic jet noise suppressor

The thrust loss and noise suppression of a divergent-lobe supersonic jet noise suppressor were experimentally determined over a range of nozzle pressure ratios of 1.5 to 4.0. These small-scale cold flow tests were made to determine the effect on thrust and noise of: suppressor length, rearward facing step height, suppressor divergence angle, and ejector shroud length and location. Noise suppression was achieved at nozzle pressure ratios of 2.5 and greater. Maximum lobe jet noise attenuation of 15 db with thrust loss differences of 1.5 percent compared to the convergent nozzle were obtained at a nozzle pressure ratio of 3.5 with an ejector shroud two nozzle diameters long. Without the ejector the attenuation was 13 db with thrust loss differences of 11 percent. Short suppressors approximately one primary nozzle throat diameter long performed as well as longer suppressors. Rearward facing step height had a significant effect on noise suppression. Ejector shrouds two nozzle diameters in length are feasible.

Huff, R. G.↗

NASA NTRS1986

SAM II measurements of Antarctic PSC's and aerosols

Measurements by the SAM II satellite instrument show that polar stratospheric clouds (PSC's) are a regular feature of the austral winter season in either nonvolcanically or volcanically disturbed periods. The tops of these clouds are observed above 20 km in early winter and descend in altitude over the course of the season to heights near 15 km in mid September. Typically, PSC's persist in the lowest stratospheric altitudes throughout September. Subsequently, October always represents a relative annual minimum in aerosol extinction above 15 km and in stratospheric column amount. In addition, volcanically produced aerosols in Antarctica peaked in early 1983 and, if linearly related to ozone losses, are probably not a contributing factor to the continued loss of total ozone in the Antarctic spring in 1984 and 1985.

Mccormick, M. P.↗

DOE OSTI2021

High-Current Density Durability of Pt/C and PtCo/C Catalysts at Similar Particle Sizes in PEMFCs

The durability of carbon supported PtCo-alloy based nanoparticle catalysts play a key role in the longevity of proton-exchange membrane fuel cells (PEMFC) in electric vehicle applications. To improve its durability, it is important to understand and mitigate the various factors that cause PtCo-based cathode catalyst layers (CCL) to lose performance over time. These factors include i) electrochemical surface area (ECSA) loss, ii) specific activity loss, iii) H + /O 2 -transport changes and iv) Co 2+ contamination effects. We use a catalyst-specific accelerated stress test (AST) voltage cycling protocol to compare the durability of Pt and PtCo catalysts at similar average nanoparticle size and distribution. Our studies indicate that while Pt and PtCo nanoparticle catalysts suffer from similar magnitudes of electrochemical surface area (ECSA) losses, PtCo catalyst shows a significantly larger cell voltage loss at high current densities upon durability testing. The distinctive factor causing the large cell voltage loss of PtCo catalyst appears to be the secondary effects of the leached Co 2+ cations that contaminate the electrode ionomer. A 1D performance model has been used to quantify the cell voltage losses arising from various factors causing degradation of the membrane electrode assembly (MEA).

08 HYDROGEN↗

DOE OSTI2023

Shallow-Water Habitat in the Lower Columbia River Estuary: A Highly Altered System

Abstract Decreases in shallow-water habitat area (SWHA) in the Lower Columbia River and Estuary (LCRE) have adversely affected salmonid populations. We investigate the causes by hindcasting SWHA from 1928 to 2004, system-wide, based on daily higher high water (HHW) and system hypsometry. Physics-based regression models are used to represent HHW along the system as a function of river inflow, tides, and coastal processes, and hypsometry is used to estimate the associated SWHA. Scenario modeling is employed to attribute SWHA losses to levees, flow regulation, diversion, navigational development, and climate-induced hydrologic change, for subsidence scenarios of up to 2 m, and for 0.5 m fill. For zero subsidence, the system-wide annual-average loss of SWHA is 55 ± 5%, or 51 × 10 5 ha/year; levees have caused the largest decrease ( $${54}_{-14}^{+5}$$ 54 - 14 + 5 %, or ~ 50 × 10 5 ha/year). The loss in SWHA due to operation of the hydropower system is small, but spatially and seasonally variable. During the spring freshet critical to juvenile salmonids, the total SWHA loss was $${63}_{-3}^{+2}$$ 63 - 3 + 2 %, with the hydropower system causing losses of 5–16% (depending on subsidence). Climate change and navigation have caused SWHA losses of $${5}_{-5}^{+16}$$ 5 - 5 + 16 % and $${4}_{-6}^{+14}$$ 4 - 6 + 14 %, respectively, but with high spatial variability; irrigation impacts have been small. Uncertain subsidence causes most of the uncertainty in estimates; the sum of the individual factors exceeds the total loss, because factors interact. Any factor that reduces mean or peak flows (reservoirs, diversion, and climate change) or alters tides and along-channel slope (navigation) becomes more impactful as assumed historical elevations are increased to account for subsidence, while levees matter less.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2018

Combined Effects of Simulated Microgravity and Radiation Exposure on Osteoclast Cell Fusion

The loss of bone mass and alteration in bone physiology during space flight are one of the major health risks for astronauts. Although the lack of weight bearing in microgravity is considered a risk factor for bone loss and possible osteoporosis, organisms living in space are also exposed to cosmic radiation and other environmental stress factors. As such, it is still unclear as to whether and by how much radiation exposure contributes to bone loss during space travel, and whether the effects of microgravity and radiation exposure are additive or synergistic. Bone is continuously renewed through the resorption of old bone by osteoclast cells and the formation of new bone by osteoblast cells. In this study, we investigated the combined effects of microgravity and radiation by evaluating the maturation of a hematopoietic cell line to mature osteoclasts. RAW 264.7 monocyte/macrophage cells were cultured in rotating wall vessels that simulate microgravity on the ground. Cells under static 1g or simulated microgravity were exposed to γ rays of varying doses, and then cultured in receptor activator of nuclear factor-κB ligand (RANKL) for the formation of osteoclast giant multinucleated cells (GMCs) and for gene expression analysis. Results of the study showed that radiation alone at doses as low as 0.1 Gy may stimulate osteoclast cell fusion as assessed by GMCs and the expression of signature genes such as tartrate resistant acid phosphatase (Trap) and dendritic cell-specific transmembrane protein (Dcstamp). However, osteoclast cell fusion decreased for doses greater than 0.5 Gy. In comparison to radiation exposure, simulated microgravity induced higher levels of cell fusion, and the effects of these two environmental factors appeared additive. Interestingly, the microgravity effect on osteoclast stimulatory transmembrane protein (Ocstamp) and Dcstamp expressions was significantly higher than the radiation effect, suggesting that radiation may not increase the synthesis of adhesion molecules as much as microgravity.

Zhang, Ye↗

NASA NTRS1957

Experimental investigation of an axial-flow-compressor inlet stage operating at transonic relative inlet Mach numbers V : rotor blade-element performance at a reduced blade angle

At a corrected speed of 1100 feet per second, the low-blade-angle rotor operated with a relative inlet Mach number of 1.2, a diffusion factor of 0.65, and an axial velocity ratio of 0.71 in the tip region (11 percent of passage height away from the outer wall). The measured minimum-loss coefficient was 0.35, and this value falls above a previous correlation of rotor losses with diffusion factor. Through a comparison with data for three other rotors, the occurrence of high losses was related to a high suction-surface Mach number. These comparisons also indicated that axial velocity ratios between 0.73 and 1.10 have no independent effect on losses.

Schwenk, Francis C↗

NASA NTRS2015

Determination of Parachute Joint Factors using Seam and Joint Testing

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

Mollmann, Catherine↗

DOE OSTI2023

Assessing residential PM 2.5 concentrations and infiltration factors with high spatiotemporal resolution using crowdsourced sensors

Building conditions, outdoor climate, and human behavior influence residential concentrations of fine particulate matter (PM 2.5 ). To study PM 2.5 spatiotemporal variability in residences, we acquired paired indoor and outdoor PM 2.5 measurements at 3,977 residences across the United States totaling >10,000 monitor-years of time-resolved data (10-min resolution) from the PurpleAir network. Time-series analysis and statistical modeling apportioned residential PM 2.5 concentrations to outdoor sources (median residential contribution = 52% of total, coefficient of variation = 69%), episodic indoor emission events such as cooking (28%, CV = 210%) and persistent indoor sources (20%, CV = 112%). Residences in the temperate marine climate zone experienced higher infiltration factors, consistent with expectations for more time with open windows in milder climates. Likewise, for all climate zones, infiltration factors were highest in summer and lowest in winter, decreasing by approximately half in most climate zones. Large outdoor–indoor temperature differences were associated with lower infiltration factors, suggesting particle losses from active filtration occurred during heating and cooling. Absolute contributions from both outdoor and indoor sources increased during wildfire events. Infiltration factors decreased during periods of high outdoor PM 2.5 , such as during wildfires, reducing potential exposures from outdoor-origin particles but increasing potential exposures to indoor-origin particles. Time-of-day analysis reveals that episodic emission events are most frequent during mealtimes as well as on holidays (Thanksgiving and Christmas), indicating that cooking-related activities are a strong episodic emission source of indoor PM 2.5 in monitored residences.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Material exploration towards high quality factor microwave resonators

Niobium and aluminum have been widely used to realize superconducting resonators and qubits. However, the native oxide at the metal air interface limits the devices results. This layer is highly disordered, and it induces losses limiting the performances of the resonators or qubits. Recently, tantalum led to great improvement in qubit relaxation time. This improvement has been attributed to a thinner and less disordered oxide layer compared to Nb and Al. This study is aimed to limit the formation of the oxide layer, by the introduction of novel superconducting materials such as rhenium or by encapsulating the Nb surface with other superconducting materials such as Ta, Al, Re or other non-superconducting materials such as Au. To better understand the results, we are realizing these studies on coplanar waveguide resonators where the relation between surface losses and quality factor is clear. We are also analyzing different fabrication techniques to completely characterize our devices, linking material properties to the performances. In this work we are also varying the participation ratio of the devices in order to extract with higher fidelity and precision the losses introduced by the involved interfaces.

Crisa, F.↗

NASA NTRS2010

Aircraft Loss of Control Study

Loss of control has become the leading cause of jet fatalities worldwide. Aside from their frequency of occurrence, accidents resulting from loss of aircraft control seize the public s attention by yielding large numbers of fatalities in a single event. In response to the rising threat to aviation safety, NASA's Aviation Safety Program has conducted a study of the loss of control problem. This study gathered four types of information pertaining to loss of control accidents: (1) statistical data; (2) individual accident reports that cite loss of control as a contributing factor; (3) previous meta-analyses of loss of control accidents; and (4) inputs solicited from aircraft manufacturers, air carriers, researchers, and other industry stakeholders. Using these information resources, the study team identified causal factors that were cited in the greatest number of loss of control accidents, and which were emphasized most by industry stakeholders. For each causal factor that was linked to loss of control, the team solicited ideas about what solutions are required and future research efforts that could potentially help avoid their occurrence or mitigate their consequences when they occurred in flight.

Jacobson, Steven R.↗

DOE OSTI2022

Tunable, Homoepitaxial Hyperbolic Metamaterials Enabled by High Mobility CdO

We report propagating light exhibits hyperbolicity in strongly anisotropic materials where the principal components of the dielectric tensor are opposite in sign. While hyperbolicity occurs naturally in anisotropic polar dielectrics, wherein optical phonons along orthogonal crystal axes are nondegenerate, such optical anisotropy can also be engineered in hyperbolic metamaterials (HMMs): thin film superlattices of alternating dielectric and metallic layers. Contrasted with the severely limited tunability of natural hyperbolic materials, the hyperbolic behavior of HMMs can be tailored significantly both through superlattice design and material selection. However, so far HMMs have suffered from high optical losses, hindering their performance. In this report, broadly tunable (λ = 2–5 µm) Type I and II hyperbolic modes with low losses (quality (Q)-factors up to 19.7) are observed through attenuated total reflectance measurements of monolithic, homoepitaxial superlattices of high- and low-doped cadmium oxide (CdO). Further, the low losses offered by CdO enable the first demonstration of real-space imaging of hyperbolic plasmon polaritons in nanoresonators by scattering-type scanning near-field optical microscopy—previously only possible for hyperbolic phonon polariton materials. Tunable, low-loss CdO HMMs promise designability for applications such as on-chip photonics, super-resolution imaging (hyperlensing), enhanced emission, novel emitter designs, and possibly quantum nanophotonic and time variant metasurfaces.

36 MATERIALS SCIENCE↗

NASA NTRS1986

OH detection by Ford Motor Company

Two different methods for detection of OH are presented: a low pressure flow cell system and a frequency modulation absorption measurement. Using conventional absorption spectroscopy, detection limits were quoted of 1,000,000 OH molecules per cu cm using a 30-minute averaging time on the ground, and a 3-hour averaging time in the air for present apparatus in use. With the addition of FM spectroscopy at 1 GHz, a double-beam machine should permit detectable absorption of and an OH limit of 100,000 per cu cm in a 30-minute averaging time. In the low pressure system on which experiments are ongoing nonexponential time behavior was observed after the decay had progressed to about 0.3 of its original level; this was attributed to ion emission in the photomultiplier. A flame source with OH present at high concentration levels was used as a calibration. It was estimated that within the sampling chamber, 400,000 OH could be measured. With a factor-of-2 loss at the sampling orifice, this means detectability of 5 to 8 x 100,000 cu cm at the present time. This could be reduced by a factor of 2 in one hour averaging time; improvements in laser bandwidth and energy should provide another factor of 2 in sensitivity.

Wang, Charles C.↗

NASA NTRS2004

Decreased Estrogen May Contribute to Osteopenia in Unloaded Bones

Progressive loss of weight-bearing bone in astronauts is one of the most serious impediments to long-duration spaceflight. Estrogen deficiency in women is an established factor in bone loss. Reduced sex hormone levels have been reported in male astronauts, but no data is available regarding spaceflight effects on female sex hormones. The objective of our study was to determine the role of estrogen in disuse osteopenia. The NASA developed hindlimb suspension (HLS) model was used to simulate the unloading disuse of weight-bearing bones experienced in space. Female Sprague-Dawley rats (age 77d; n = 20/group) were HLS or kept ambulatory (AMB) for 38 d and endocrine and bone indices determined. HLS of rats resulted in lower (p less than 0.01) bone mass (9%0), bone mineral content (BMC 13%) and mechanical strength (28%) compared to AMB animals. Plasma estradiol (E2) was lower (p = 0.03) in HLS (10.1 +/- 1.4 pg/ml) compared to AMB rats (16.7 +/- 2.6 pg/ml). E2 was positively correlated to BMC r(sup 2) = 0.67 and mechanical strength r(sup 2) = 0.61. These results suggest that reduced E2 plays a role in disuse osteopenia induced by HLS. Plasma or pituitary lutenizing hormone (LH) and follicle stimulating hormone (FSH) levels were not different in HLS versus AMB rats. However, pituitary LH was correlated to E2 (r(sup 2) = 0.57), suggesting changes in E2 were exerted at the level of the hypothalamus-pituitary axis. Understanding the role of estrogen in disuse osteopenia is necessary to the development of efficacious therapies for female astronauts, bed rest patients and the increasing number of individuals in our sedentary population suffering bone loss.

Tou, Janet↗

NASA NTRS1977

Application of wheat yield model to United States and India

The author has identified the following significant results. The wheat yield model was applied to the major wheat-growing areas of the US and India. In the US Great Plains, estimates from the winter and spring wheat models agreed closely with USDA-SRS values in years with the lowest yields, but underestimated in years with the highest yields. Application to the Eastern Plains and Northwest indicated the importance of cultural factors, as well as meteorological ones in the model. It also demonstrated that the model could be used, in conjunction with USDA-SRRS estimates, to estimate yield losses due to factors not included in the model, particularly diseases and freezes. A fixed crop calendar for India was built from a limited amount of available plot data from that country. Application of the yield model gave measurable evidence that yield variation from state to state was due to different mixes of levels of meteorological and cultural factors.

Feyerherm, A. M.↗

DOE OSTI2024

Beyond the Textbook: Ethics Education in Physics

The existing research on why people fail to act ethically identifies a range of motivations, with character traits and peer pressure being the top two causes. Other factors include gain, fear of loss, relationships, competition, opportunity, and cultural factors. In addition to the ethics component, studies have identified also individual and institutional ones. For instance, narcissism plays a significant role in misconduct. The effect of institutional actions, from neglecting punishment in many cases of misconduct up to letting researchers succeed through unethical behavior, was also studied. The only way for an organization to have every member perceive that ethical conduct will enhance their standing and reputation is to display leadership by example. However, despite leaders in academia being nowadays much more educated than twenty years ago about equity, diversity, inclusion and ethical behavior, the occurrence of misconduct has not decreased. Because of the power t hat this demographic holds in enacting reform, as opposed to minority groups who are already encumbered enough, it would be helpful to target the former for equity education. Education and intervention in identifying patterns of thought and action that prevent ethical progress, in deflecting peer pressure, in assuming accountability for their departments, etc. can help. Once again, all roads lead to Rome: an educated and inspired leadership is the most effective tool for change.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRSDate not supplied

Hot hydrogen testing of carbides developed for nuclear thermal propulsion

Carbides are candidate materials for use in nuclear thermal propulsion, either as the primary material in nuclear fuel elements or as protective coatings. During operation, the fuel elements are exposed to flowing hydrogen gas at high temperature and it is important that fuel mass loss resulting from hydrogen corrosion be kept to a minimum. In this study, ZrC and NbC were fully consolidated by spark plasma sintering at 2100 °C, and relative densities greater than 98% were achieved. The samples were characterized by scanning electron microscopy and x-ray diffraction before and after hydrogen testing. The samples were exposed to hot flowing hydrogen gas at a pressure of 1 atm., at a temperature of 2500 K, and for durations up to 3 hours. It was found that the mass loss rate decreased with increasing exposure, before reaching a steady state value of about 1 mg/m2s. Oxygen in the samples increased the mass loss rate. Samples for which oxygen could be detected by x-ray diffraction had their mass loss rate increase by a factor of 10. Overall, the mass loss rates compare quite favorably to those previously reported.

M. P. Volz↗

DOE OSTI2024

Beam Loss Assessment Through Use of Photomultiplier Tubes

Modern accelerators aim to deliver maximal beam current at stable energy with minimal beam loss. Environmental changes, among other factors, can result in increased beam loss and decreased beam throughput, prompting daily retuning of the accelerator. The compact nature of the oldest part of the linear accelerator limits the available beam instrumentation, making beam loss assessment and tuning difficult. Thus, additional devices for beam loss monitoring must be considered. Photomultiplier tube-based beam loss monitors (BLMs) were installed along the Fermilab drift tube Linac to assess beam loss. Due to noise, the data from the installed photomultiplier tubes was difficult to assess. After noise reduction and signal analysis, it was found that the signals produced by the photomultiplier tubes in response to beam loss were consistent for a given configuration and therefore a reasonable measure of beam loss. This project lays groundwork for future work in beam loss assessment using photomultiplier tubes, with the automation of the process developed in this project being the next step in this effort.

Waggoner, Alexander↗

DOE OSTI2024

Thermal Adaptation of Enzyme‐Mediated Processes Reduces Simulated Soil CO2 Fluxes Upon Soil Warming

Abstract Understanding factors influencing carbon effluxes from soils to the atmosphere is important in a world experiencing climatic change. Two important uncertainties related to soil organic carbon (SOC) stock responses to a changing climate are (a) whether soil microbial communities acclimate or adapt to changes in soil temperature and (b) how to represent this process in SOC models. To further explore these issues, we included thermal adaptation of enzyme‐mediated processes in a mechanistic SOC model (ReSOM) using the macromolecular rate theory. Thermal adaptation is defined here to encompass all potential responses of soil microbes and microbial communities following a change in temperature. To assess the effects of thermal adaptation of enzyme‐mediated processes on simulated SOC losses, ReSOM was applied to data collected from a 13‐year soil warming experiment. Results show that a model omitting thermal adaptation of enzyme‐mediated processes substantially overestimates observed CO 2 effluxes during the initial years of soil warming. The bias against observed CO 2 effluxes was lower for models including thermal adaptation of enzyme‐mediated processes. In addition, for a simulated linear 3°C soil warming over 100 years, models including thermal adaptation of enzyme‐mediated processes simulated SOC losses of a factor of three smaller than models omitting this process. As thermal adaptation of microbial community characteristics is generally not included in models simulating feedback between the soil, biosphere and atmosphere, we encourage future studies to assess the potential impact that microbial adaptation has on soil carbon – climate feedback representations in models. Plain Language Summary A major uncertainty in projecting how much soil organic carbon (SOC) will be converted to CO 2 as a consequence of climate change is related to how soil microbes may adapt to increasing soil temperatures. While this “microbial thermal adaptation” has been shown to occur in short‐term lab incubation experiments, its effect on SOC cycling on a decadal timescale is not clear. To address this knowledge gap, a mechanistic SOC model was used to simulate data collected from a 13‐year soil warming experiment, to assess how microbial thermal adaptation affects predicted SOC losses upon soil warming. The model results show that incorporating microbial thermal adaptation into the model led to reduced CO 2 effluxes from the soil to the atmosphere compared to the common approach of omitting this mechanism. Our results imply that projected SOC losses for the decades to come may be reduced when this mechanism is incorporated in land models. We therefore advocate for more research on the mechanisms controlling microbial thermal adaptation, and how to implement this mechanism in SOC models. Key Points A crucial aspect of soil organic carbon (SOC) models is the representation of soil microbes Predicted soil CO 2 fluxes upon soil warming are reduced when accounting for microbial thermal adaptation On a centennial time scale, this thermal adaptation results in up to a factor of three lower predicted SOC loss

Van de Broek, Marijn↗