Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “laser simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of laser preheat in magnetized liner inertial fusion at OMEGA

Integrated magnetized liner inertial fusion (MagLIF) experiments on the OMEGA laser system are modeled to investigate the effects of laser preheat on implosion performance. In both simulations and experiments, preheating the fuel with a laser enhances the neutron yield, with the maximum yield occurring at an optimal preheat laser energy. Increasing the preheat energy past the optimal value reduces the neutron yield. In simulations, the rate of the drop in neutron yield depends on the inclusion of the Nernst effect. The Nernst effect advects the magnetic field away from the center of the fuel region during the preheat stage of MagLIF on OMEGA and weakens magnetic-flux compression. If the Nernst effect is not included, the simulated drop in yield past the optimal preheat laser energy is more gradual as opposed to the sharper drop seen in experiments. Simulations are able to model trend in measured ion temperatures seen in experiments. Here, a mix model is used to show that including mix from the wall in the simulated fuel region further degrades the yield and lowers the optimal preheat laser energy. Simulations with mix predict that increasing the initial axial magnetic field may still enhance yield performance in integrated implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Enhancing positron production using front surface target structures

We report a target design which produced a substantial gain in relativistic electron-positron pair production using high-intensity lasers and targets with large-scale micro-structures on their surface. Comparing to an unstructured target, a selected Si microwire array target yielded a near 100% increase in the laser-to-positron conversion efficiency and produced a 10MeV increase in the average emitted positron energy under nominally the same experimental conditions. We had established a multi-scale particle-in-cell simulation scheme to simulate both the laser absorption and the subsequent pair productions in a thick metal target. Here, the experimental results are supported by the simulations demonstrating the performance increase is due to a higher conversion efficiency of laser energy into electrons with kinetic energies greater than 10 MeV due to enhanced direct laser acceleration of electrons enabled by the microwire array.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Simulating long-range coherence of atoms and photons in quantum computers

Lasers and Bose-Einstein condensates (BECs) exhibit macroscopic quantum coherence in seemingly unrelated ways. Lasers possess a well-defined global phase and are characterized by large fluctuations in the number of photons. In BECs of atoms, instead, the number of particles is conserved and the global phase is undefined. Here, we present a unified framework to simulate lasers and BECs states in gate-based quantum computers, by mapping bosonic particles to qubit excitations. Our approach relies on a scalable circuit that measures the total number of particles without destroying long-range coherence. We introduce complementary probes to measure the global and relative phase coherence of a quantum state, and demonstrate their functionality on a Rigetti quantum computer. Our work shows that particle-number conservation enhances long-range phase coherence, highlighting a mechanism used by superfluids and superconductors to gain phase stiffness.

Torre, Emanuele Dalla↗
DOE OSTI2024

GEANT4 Simulations on Faraday Cup Design for PIP-II Laser Wire Scanner System

The PIP-II accelerator upgrade at Fermilab represents a groundbreaking leap forward in high-energy physics research. This ambitious initiative involves enhancing Fermilab's accelerator complex by replacing the current linear accelerator with a warm front end (WFE) capable of accelerating H- beams up to 2.1 MeV. Subsequently, a superconducting linac further accelerates these beams up to 800 MeV. To precisely measure the transverse beam profile, a combination of traditional wire scanners at the WFE section and Laser wire scanners along the superconducting linac are planned for implementation. This investigation centers on refining the Faraday cup design for the PIP-II Laser wire scanners by utilizing GEANT4, a Monte Carlo simulation toolkit. Leveraging this method enables a comprehensive analysis of particle trajectories, energy deposition, secondary electron emission, backscattering, etc., facilitating optimization through adjustments to cup geometries, materials, and placement to maximize its efficiency.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Multimode turbulent flow measurements using magnetic resonance imaging- and laser-based techniques and computational fluid dynamics simulations

We studied the flow field characteristics of a turbulent flow over a regularized cube array with a perpendicular injection flow through the floor between the second and third cubical elements, representing the complex flow interactions of a 3D jet and the wake flows behind cubical obstacles. Four different experimental measurements were performed: two magnetic resonance imaging-based measurements for three-dimensional three-component velocity (MRV) and concentration (MRC) and two laser-based techniques, particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF), for two-dimensional two-component velocity and concentration measurement, respectively. The mainstream Reynolds number is Re = 15 000⁠, based on the primary inlet velocity U m and channel height D H ⁠, whereas the injector Reynolds number is Re j = 3400⁠, based on the injector velocity U j and the injector's exit width D j ⁠. Numerical simulations were performed for the studied flow configuration of turbulent flow over a regularized cube array using Reynolds-averaged Navier–Stokes (RANS) and large-eddy simulation (LES) approaches. Results obtained from experimental measurements—including MRV, MRC, PIV, and PLIF—as well as RANS and LES simulations are discussed and compared along several horizontal and vertical planes of the studied configuration. In addition, 3D turbulent flow structures, such as leading-edge vortex, horseshoe vortex, and jet shear-layer vortex, and the isosurfaces of scalar concentration successfully revealed by MRV and MRC techniques were found to be in very good agreement with those 3D features extracted from RANS and LES simulations. In conclusion, the high-resolution experimental and numerical database obtained from this study could be useful for validation and verification of numerical codes.

Computational fluid dynamics↗
DOE OSTI2024

Developing nonlinear laser-plasma instability models for high-fidelity, multi-physics simulation capability for ICF/HED (IC Report) [Slides]

Modeling nonlinear effects of laser plasma instabilities (LPI) is critically important for ICF/HED experiments. Our project has the following goals: • Develop physics-based nonlinear LPI models using PIC simulations • Couple the nonlinear LPI effects to macroscopic modeling of ICF/HED exp. through laser ray-tracing (LRT).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

ExaCA grain structure predictions for laser powder bed fusion processing

This dataset contains simulated cross-sections of laser powder bed fusion grain structures produced using the microstructure model ExaCA, in turn using time-temperature history data produced using the heat transport model AdditiveFOAM. These predictions show the grain structure using various permutations of hatch spacing and nucleation density. Also contained in the dataset are the input files necessary to reproduce the results. AdditiveFOAM (https://github.com/ORNL/AdditiveFOAM) and ExaCA (https://github.com/LLNL/ExaCA), both open source software, are required to reproduce the results in this dataset using the given input files. This DOI was updated 12/09/2025.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Temporal pre-pulse shaping in dual pulse laser produced plasma for the optimization of the EUV source in tin microdroplet system

Dual-laser beams interacting with small droplets of liquid tin are currently the most efficient systems for producing the 13.5 nm EUV photon radiation source required for the next generation microchips. Usually, EUV light is produced during the second main-pulse stage, while the pre-pulse (PP) is used for target preparation, i.e., droplet preheating, vaporization, and target deformation. However, the PP laser energy can be utilized more efficiently if the EUV producing plasma is being developed during the PP stage as well. In this work, we study the ways of optimization of the PP laser temporal shape to achieve conditions for maximum EUV output during the pre-pulse. The size of the deformed droplet is kept optimized for the following main laser pulse. Our simulations showed a significant increase in the EUV output at the pre-pulse stage when a ramping profile is used for the laser temporal shape. Using the ramped square pre-pulse produces 24% gain in the EUV output in comparison with the standard Gaussian temporal profile (i.e., regular Nd:YAG shape) for the same energy of the laser pulse.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling laser-driven ion acceleration with deep learning

Developments in machine learning promise to ameliorate some of the challenges of modeling complex physical systems through neural-network-based surrogate models. High-intensity, short-pulse lasers can be used to accelerate ions to mega-electronvolt energies, but to model such interactions requires computationally expensive techniques such as particle-in-cell simulations. Multilayer neural networks allow one to take a relatively sparse ensemble of simulations and generate a surrogate model that can be used to rapidly search the parameter space of interest. In this study, we created an ensemble of over 1,000 simulations modeling laser-driven ion acceleration and developed a surrogate to study the resulting parameter space. A neural-network-based approach allows for rapid feature discovery not possible for traditional parameter scans given the computational cost. A notable observation made during this study was the dependence of ion energy on the pre-plasma gradient length scale. While this methodology harbors great promise for ion acceleration, it has ready application to all topics in which large-scale parameter scans are restricted by significant computational cost or relatively large, but sparse, domains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Characterization of sub-picosecond laser-produced fast electrons by modeling angularly resolved bremsstrahlung measurements with 3D hybrid particle-in-cell code

Hard x-rays produced by intense laser-produced fast electrons interacting with solids are a vital source for producing radiographs of high-density objects and implosion cores for inertial confinement fusion. Accurate calculation of hard x-ray sources requires a three-dimensional (3D) simulation geometry that fully models the electron transport dynamics, including electron recirculation and the generation of absolute photon yields. To date, 3D simulations of laser-produced bremsstrahlung photons over tens of picoseconds and code benchmarking have not been performed definitively. In this study, we characterize sub-picosecond laser-produced fast electrons by modeling angularly resolved bremsstrahlung measurements for refluxing and non-refluxing targets using the 3D hybrid particle-in-cell (PIC), Large Scale Plasma code. Bremsstrahlung radiation and escaped electron data were obtained by focusing a 50-TW Leopard laser (15 J, 0.35 ps, 2 × 10 19 W/cm 2 ) on a 100-μm-thick Cu foil and a Cu with a large plastic backing (Cu–CH target). Data for both the Cu and Cu–CH targets were reproduced for simulations with a given set of electron parameters. Comparison of the simulations revealed that the hard x-ray emission from the Cu target was significantly longer in duration than that from the Cu–CH target. Here, the benchmarked hybrid PIC code could prove to be a powerful tool in the design and optimization of time- and angular-dependent bremsstrahlung sources for flash x-ray and gamma-ray radiography.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Analyzing the effect of doping concentration in split-well resonant-phonon terahertz quantum cascade lasers

The effect of doping concentration on the temperature performance of the novel split-well resonant-phonon (SWRP) terahertz quantum-cascade laser (THz QCL) scheme supporting a clean 4-level system design was analyzed using non-equilibrium Green’s functions (NEGF) calculations. Experimental research showed that increasing the doping concentration in these designs led to better results compared to the split-well direct-phonon (SWDP) design, which has a larger overlap between its active laser states and the doping profile. However, further improvement in the temperature performance was expected, which led us to assume there was an increased gain and line broadening when increasing the doping concentration despite the reduced overlap between the doped region and the active laser states. Through simulations based on NEGF calculations we were able to study the contribution of the different scattering mechanisms on the performance of these devices. We concluded that the main mechanism affecting the lasers’ temperature performance is electron-electron (e-e) scattering, which largely contributes to gain and line broadening. Interestingly, this scattering mechanism is independent of the doping location, making efforts to reduce overlap between the doped region and the active laser states less effective. Optimization of the e-e scattering thus could be reached only by fine tuning of the doping density in the devices. By uncovering the subtle relationship between doping density and e-e scattering strength, our study not only provides a comprehensive understanding of the underlying physics but also offers a strategic pathway for overcoming current limitations. This work is significant not only for its implications on specific devices but also for its potential to drive advancements in the entire THz QCL field, demonstrating the crucial role of e-e scattering in limiting temperature performance and providing essential knowledge for pushing THz QCLs to new temperature heights.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Toward accurate prediction of partial-penetration laser weld performance informed by three-dimensional characterization – Part II: μCT based finite element simulations

The mechanical behavior of partial-penetration laser welds exhibits significant variability in engineering quantities such as strength and apparent ductility. Understanding the root cause of this variability is important when using such welds in engineering designs. In Part II of this work, we develop finite element simulations with geometry derived from micro-computed tomography (μCT) scans of partial-penetration 304L stainless steel laser welds that were analyzed in Part I. We use these models to study the effects of the welds’ small-scale geometry, including porosity and weld depth variability, on the structural performance metrics of weld ductility and strength under quasi-static tensile loading. We show that this small-scale geometry is the primary cause of the observed variability for these mechanical response quantities. Additionally, we explore the sensitivity of model results to the conversion of the μCT data to discretized model geometry using different segmentation algorithms, and to the effect of small-scale geometry simplifications for pore shape and weld root texture. The modeling approach outlined and results of this work may be applicable to other material systems with small-scale geometric features and defects, such as additively manufactured materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Non-equilibrium plasma generation via nano-second multi-mode laser pulses

The formation and growth of plasma kernels generated via nano-second mode-beating laser pulses is investigated here via a non-equilibrium self-consistent computational model. Chemically reactive Navier–Stokes equations are used to describe the hydrodynamics, and non-equilibrium effects are taken into account with a two-temperature model. Inverse Bremsstrahlung and multiphoton ionization are included self-consistently in the model via a coupled solution of the plasma governing equations and the radiative transfer equation (that describes the laser beam propagation and attenuation). A self-consistent approach (despite carrying additional challenges) minimizes the empiricism and it allows for a more accurate description since it prevents both the utilization of artificial plasma seeds to trigger the breakdown and the implementation of tuning parameters to simulate the laser-energy deposition. The advantages of this approach are confirmed by the good agreement between the numerically predicted and the experimentally measured plasma boundary evolution and absorbed energy. This also holds true for the periodic plasma kernel structures that, as suggested by the experiments and confirmed by the simulations presented here, are connected to the modulating frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Numerical simulation of the divergence and optical confinement factor of a semiconductor laser with an asymmetric periodic multilayer AlGaInAs/InP waveguide

The divergence and optical confinement factor of a semiconductor laser with an asymmetric periodic (multilayer) waveguide are numerically simulated. The reasons for the choice of the given heterostructure design are explained, and the consequences of choosing other layer structures are considered. It is shown how to choose the active waveguide thickness, the active region position on the waveguide, and the multilayer waveguide grating period. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

The importance of laser wavelength for driving inertial confinement fusion targets. I. Basic physics

We reinvestigate the role that laser wavelength plays in driving inertial confinement fusion (ICF) targets. Different assumptions underlie previous analytic frameworks that provide predictions for wavelength scaling of many important target parameters. These are explored and compared to radiation-hydrodynamics simulations of laser-driven targets. We are particularly interested here in lasers with wavelengths between 0.193 μm [wavelength of the Argon Flouride (ArF) excimer laser] and 0.527 μm (the frequency-doubled glass Nd:glass laser). Short-wavelength drivers have significant advantages for directly driven ICF targets, which are summarized here. We show that constraints such as providing a certain pressure or avoiding laser-plasma instability thresholds allow shorter laser wavelengths to provide energy savings, pressure enhancements, and/or higher hydrodynamic efficiencies. We also consider potential disadvantages, such as increased laser imprint or exposure to the Landau–Darrieus instability. These are shown to be either minor and/or can be easily remediated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Quarterly Management Document – FY22, 3rd Quarter, Multi-pass Hybrid Laser Arc Welding of Alloy 740H

During the 3rd quarter of FY22, progress was made on modeling and simulation of deep penetration laser welding of Alloy 740H. Advances in the modeling of residual stress development arising from the calculated temperature field of the solidifying weld pool were made to understand the development of solidification cracking. Additionally, preliminary modeling of the temperature field within the weld pool of a wobbling laser heat source was performed. The maximum temperature of the weld pool was found to vary with time. These result will allow modeling of deep penetration laser welding using a wobbling laser to mitigate weld defects and cracking. Also, additional characterization of hybrid laser arc welds indicated that these welds were not defect-free as originally thought and the current HLA welds would not be acceptable under criteria outlined in the ASME Boiler and Pressure Vessel Code, Section IX. Therefore, additional welding trails with variation of the welding parameters and HLA welding configurations are required to produce welds acceptable under the Section IX criteria. It was shown that considerable reduction of HLAW defects had been achieved with each successive welding campaign. Therefore additional variation of HLAW parameters may still yield the desired defect-free welds, however, options for alternate HLAW configurations as well as plate preheating are outlined as contingency plans to obtain suitable welds. These additional (unplanned) HLAW trial may prevent subsequent milestones from being achieved within the original budget.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laser pulse driven control of charge and spin order in the two-dimensional Kondo lattice

Fast and dynamical control of quantum phases is highly desired in the application of quantum phenomena in devices. On the experimental side, ultrafast laser pulses provide an ideal platform to induce femtosecond dynamics in a variety of materials. Here we show that a laser pulse driven heavy fermion system can be tuned to dynamically evolve into a phase, which is not present in equilibrium. Using the state-of-the-art time-dependent variational Monte Carlo method, we perform numerical simulations of realistic laser pulses applied to the Kondo lattice model. By tracking spin and charge degrees of freedom we identify a dynamical phase transition, within the partially Kondo screened phase, from a charge ordered into a metallic state, while preserving the spin order of the system. Furthermore, we propose using high-harmonic generation and nonequilibrium optical conductivity to identify the dynamical phase transition in an ultrafast experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Demonstration of improved laser preheat with a cryogenically cooled magnetized liner inertial fusion platform

We report on progress implementing and testing cryogenically cooled platforms for Magnetized Liner Inertial Fusion (MagLIF) experiments. Two cryogenically cooled experimental platforms were developed: an integrated platform fielded on the Z pulsed power generator that combines magnetization, laser preheat, and pulsed-power-driven fuel compression and a laser-only platform in a separate chamber that enables measurements of the laser preheat energy using shadowgraphy measurements. The laser-only experiments suggest that ~89% ± 10% of the incident energy is coupled to the fuel in cooled targets across the energy range tested, significantly higher than previous warm experiments that achieved at most 67% coupling and in line with simulation predictions. The laser preheat configuration was applied to a cryogenically cooled integrated experiment that used a novel cryostat configuration that cooled the MagLIF liner from both ends. Furthermore, the integrated experiment, z3576, coupled 2.32 ± 0.25 kJ preheat energy to the fuel, the highest to-date, demonstrated excellent temperature control and nominal current delivery, and produced one of the highest pressure stagnations as determined by a Bayesian analysis of the data.

47 OTHER INSTRUMENTATION↗