SEARCH · Engineering Papers

Results for “junction structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Improvement of Front-Junction GaInP by Point-Defect Injection and Annealing

Traditional front junction GaInP solar cells are radiation tolerant and can have good diffusion length, but have limited voltage and thus efficiency. Here, we investigate the impact of annealing on GaInP device performance. First, Zn-doped GaInP/AlGaInP double heterojunction structures are studied in order to investigate the impact of annealing in a simple structure. While standard anneals lower diffusion length and lifetime, annealing after injecting point-defects improves material quality, presumably by eliminating sources of non-radiative recombination. Atomic ordering is reduced by the anneal, which raises the device bandgap and requires consideration. These results can be used to improve front junction device performance while controlling the bandgap. Then, GaInP front-junction devices are created using anneals with and without point-defect injection. Voc and EQE trends follow the diffusion length and lifetime trends from the DH structures. Baseline devices have Woc of 0.484 V, raising to 0.504 V after a high temperature anneal. However, injecting point defects prior to the anneal results in a front junction device with Woc of 0.405 V and a diffusion length greater than 8 micrometers. Optimized front-junction GaInP devices with an ARC have ~20% efficiency without a rear reflector.

anneal↗

DOE OSTI2021

Improvement of Front-Junction GaInP by Point-Defect Injection and Annealing: Preprint

anneal↗

DOE OSTI2024

Structural basis for a highly conserved RNA-mediated enteroviral genome replication

Abstract Enteroviruses contain conserved RNA structures at the extreme 5′ end of their genomes that recruit essential proteins 3CD and PCBP2 to promote genome replication. However, the high-resolution structures and mechanisms of these replication-linked RNAs (REPLRs) are limited. Here, we determined the crystal structures of the coxsackievirus B3 and rhinoviruses B14 and C15 REPLRs at 1.54, 2.2 and 2.54 Å resolution, revealing a highly conserved H-type four-way junction fold with co-axially stacked sA-sD and sB-sC helices that are stabilized by a long-range A•C•U base-triple. Such conserved features observed in the crystal structures also allowed us to predict the models of several other enteroviral REPLRs using homology modeling, which generated models almost identical to the experimentally determined structures. Moreover, our structure-guided binding studies with recombinantly purified full-length human PCBP2 showed that two previously proposed binding sites, the sB-loop and 3′ spacer, reside proximally and bind a single PCBP2. Additionally, the DNA oligos complementary to the 3′ spacer, the high-affinity PCBP2 binding site, abrogated its interactions with enteroviral REPLRs, suggesting the critical roles of this single-stranded region in recruiting PCBP2 for enteroviral genome replication and illuminating the promising prospects of developing therapeutics against enteroviral infections targeting this replication platform.

Biochemistry & Molecular Biology↗

DOE OSTI2023

Structural basis for cloverleaf RNA-initiated viral genome replication

The genomes of positive-strand RNA viruses serve as a template for both protein translation and genome replication. In enteroviruses, a cloverleaf RNA structure at the 5' end of the genome functions as a switch to transition from viral translation to replication by interacting with host poly(C)-binding protein 2 (PCBP2) and the viral 3CD pro protein. We determined the structures of cloverleaf RNA from coxsackievirus and poliovirus. Cloverleaf RNA folds into an H-type four-way junction and is stabilized by a unique adenosine-cytidine-uridine (A•C-U) base triple involving the conserved pyrimidine mismatch region. The two PCBP2 binding sites are spatially proximal and are located on the opposite end from the 3CD pro binding site on cloverleaf. We determined that the A•C-U base triple restricts the flexibility of the cloverleaf stem–loops resulting in partial occlusion of the PCBP2 binding site, and elimination of the A•C-U base triple increases the binding affinity of PCBP2 to the cloverleaf RNA. Based on the cloverleaf structures and biophysical assays, we propose a new mechanistic model by which enteroviruses use the cloverleaf structure as a molecular switch to transition from viral protein translation to genome replication.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

The {10$\overline{1}$2} non-cozone twin-twin interactions in Mg: A stability and mobility study using 3-D atomistic simulations

Due to easy activation of tensile twinning in Mg, multiple {10$\overline{1}$2} twin variants can interact with each other and form twin-twin boundaries over the course of plastic deformation. Previous studies using 2-D settings provide only a partial understanding of these interactions, especially the non-cozone ones. Here, atomistic simulations are used to study the 3-D structural characteristic and evolution of the non-cozone {10$\overline{1}$2} twin-twin junctions. The study reveals the existence of new twin-twin boundaries (TTBs) such as TTB BP and TTB K2 , formed after the interaction between the basal prismatic and conjugate twin interfaces with the coherent twin boundary. Here, for both non-cozone twin-twin interactions, the {10$\overline{1}$2} TTB and its associated twin-twin junctions are found to play a major role in the {10$\overline{1}$2} twin's stability and mobility. Specifically, they promote the growth of the 3-D twin in both the normal and forward directions during the interaction and hinder the detwinning process upon unloading.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Direct Visualization of the Charge Transfer in a Graphene/α-RuCl 3 Heterostructure via Angle-Resolved Photoemission Spectroscopy

Not Available

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Two interaction surfaces between XPA and RPA organize the preincision complex in nucleotide excision repair

The xeroderma pigmentosum protein A (XPA) and replication protein A (RPA) proteins fulfill essential roles in the assembly of the preincision complex in the nucleotide excision repair (NER) pathway. We have previously characterized the two interaction sites, one between the XPA N-terminal (XPA-N) disordered domain and the RPA32 C-terminal domain (RPA32C), and the other with the XPA DNA binding domain (DBD) and the RPA70AB DBDs. Here, we show that XPA mutations that inhibit the physical interaction in either site reduce NER activity in biochemical and cellular systems. Combining mutations in the two sites leads to an additive inhibition of NER, implying that they fulfill distinct roles. Our data suggest a model in which the interaction between XPA-N and RPA32C is important for the initial association of XPA with NER complexes, while the interaction between XPA DBD and RPA70AB is needed for structural organization of the complex to license the dual incision reaction. Integrative structural models of complexes of XPA and RPA bound to single-stranded/double-stranded DNA (ss/dsDNA) junction substrates that mimic the NER bubble reveal key features of the architecture of XPA and RPA in the preincision complex. Most critical among these is that the shape of the NER bubble is far from colinear as depicted in current models, but rather the two strands of unwound DNA must assume a U-shape with the two ss/dsDNA junctions localized in close proximity. Our data suggest that the interaction between XPA and RPA70 is key for the organization of the NER preincision complex.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Design, Optimization, and In-Depth Understanding of Front and Rear Junction Screen-Printed Double-Side Passivated Contacts Solar Cells

Investigate the efficiency potential of n-type screen-printed poly-Si based double-side tunnel oxide passivated contacts (DS-TOPCon) silicon solar cells Establish key material/device parameters and technologies to attain practically achievable DS-TOPCon cell efficiency by Quokka 2D Develop fundamental understanding of underlying mechanisms governing cell operation in front junction (FJ) and rear junction (RJ) cell designs to explain why RJ is a better choice for DS-TOPCon structure

14 SOLAR ENERGY↗

DOE OSTI2023

Femtosecond Laser-Induced Nano-Joining of Volatile Tellurium Nanotube Memristor

Nanowire/nanotube memristor devices provide great potential for random-access high-density resistance storage. However, fabricating high-quality and stable memristors is still challenging. This paper reports multileveled resistance states of tellurium (Te) nanotube based on the clean-room free femtosecond laser nano-joining method. The temperature for the entire fabrication process was maintained below 190 °C. A femtosecond laser joining technique was used to form nanowire memristor units with enhanced properties. Femtosecond (fs) laser-irradiated silver-tellurium nanotube-silver structures resulted in plasmonic-enhanced optical joining with minimal local thermal effects. This produced a junction between the Te nanotube and the silver film substrate with enhanced electrical contacts. Noticeable changes in memristor behavior were observed after fs laser irradiation. Capacitor-coupled multilevel memristor behavior was observed. Compared to previous metal oxide nanowire-based memristors, the reported Te nanotube memristor system displayed a nearly two-order stronger current response. The research displays that the multileveled resistance state is rewritable with a negative bias.

42 ENGINEERING↗

DOE OSTI2025

Map of the Zintl AM 2 Pn 2 Compounds: Influence of Chemistry on Stability and Electronic Structure

The AM 2 Pn 2 (A= Ca, Sr, Ba, Yb, Mg; M = Zn, Cd, Mg; and Pn = N, P, As, Sb, Bi) family of Zintl phases has been known as thermoelectric materials and has recently gained much attention for highly promising materials for solar absorbers in single-junction and tandem solar cells. In this paper, we will, from first principles, explore the entire family of AM 2 Pn 2 compounds in terms of their ground-state structure, thermodynamic stability, and electronic structure. We also perform photoluminescence spectroscopy on bulk powder and thin film samples to verify our results, including the first measurements of the band gaps of SrCd 2 P 2 and CaCd 2 P 2 . The AM 2 Pn 2 compounds exhibit broad stability, are mostly isostructural to CaAl 2 Si 2 (P$\overline{3}$m1), and cover a wide range of band gaps from 0 to beyond 3 eV. This could make them useful for a variety of purposes, for which we propose several candidates, such as CaZn 2 N 2 for tandem top cell solar absorbers and SrCd 2 Sb 2 and CaZn 2 Sb 2 for infrared detectors. By examining the band structures of the AM 2 Pn 2 , we find that Mg 3 Sb 2 has the most promise as a thermoelectric material due to several off-Γ valence band pockets, which are unique to it among the compositions studied here.

14 SOLAR ENERGY↗

DOE OSTI2020

Exciton Delocalization in Indolenine Squaraine Aggregates Templated by DNA Holliday Junction Scaffolds

Exciton delocalization plays a prominent role in the photophysics of molecular aggregates, ultimately governing their particular function or application. DNA is a compelling scaffold in which to template molecular aggregates and promote exciton delocalization. As individual dye molecules are the basis of exciton delocalization in molecular aggregates, their judicious selection is important. Motivated by their excellent photostability and spectral properties, here we examine the ability of squaraine dyes to undergo exciton delocalization when aggregated via a DNA Holliday junction (HJ) template. A commercially available indolenine squaraine dye was chosen for the study given its strong structural resemblance to Cy5, a commercially available cyanine dye previously shown to undergo exciton delocalization in DNA HJs. Three types of DNA-dye aggregate configurations—transverse dimer, adjacent dimer, and tetramer—were investigated. Signatures of exciton delocalization were observed in all squaraine-DNA aggregates. Specifically, strong blue shift and Davydov splitting were observed in steady-state absorption spectroscopy and exciton-induced features were evident in circular dichroism spectroscopy. Strongly suppressed fluorescence emission provided additional, indirect evidence for exciton delocalization in the DNA-templated squaraine dye aggregates. To quantitatively evaluate and directly compare the excitonic Coulombic coupling responsible for exciton delocalization, the strength of excitonic hopping interactions between the dyes were obtained by simultaneous fitting the experimental steady-state absorption and CD spectra via a Holstein-like Hamiltonian in which, following the theoretical approach of Kühn, Renger, and May, the dominant vibrational mode is explicitly considered. The excitonic hopping strength within indolenine squaraines was found to be comparable to that of the analogous Cy5 DNA-templated aggregate. The squaraine aggregates adopted primarily an H-type (dyes oriented parallel to each other) spatial arrangement. Extracted geometric details of dye mutual orientation in the aggregates enabled close comparison of aggregate configurations and the elucidation of the influence of dye angular relationship on excitonic hopping interactions in squaraine aggregates. Furthermore, these results encourage the application of squaraine-based aggregates in next generation systems driven by molecular excitons.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Galvanic Transformation Dynamics in Heterostructured Nanoparticles

Corrosion is a significant problem for the stability of structural metals and potentially for functional nanomaterials in operating environments. When two metals with different electrochemical potentials form a junction, galvanic corrosion occurs, resulting in the sacrificial dissolution of the metal with a higher oxidation potential (lower electrode potential). In this report it is shown that bimetallic hetero-nanostructures composed of phase-segregated metals undergo galvanic corrosion in aqueous environments. Such selective etching of the sacrificial metal in heterojunction particles leads to the formation of unusual and kinetically stabilized half-spheroid particles. By using a fluid cell and in situ scanning transmission electron microscopy, a two-stage corrosion process can be observed where the Cu experiences a fractal breakdown before the Ag corrodes due to the lack of a protective oxide layer. However, when treated with a mild Ar plasma, the stability of these structures against corrosion is enhanced due to the conversion of the amorphous native oxide to a denser, thin layer of CuO on the Cu surface. Taken together, this work highlights the importance of considering the effects of galvanic corrosion on the stability of multicomponent nanoparticles, and it shows how mass transport in a nanoscale system is influenced by redox processes.

36 MATERIALS SCIENCE↗

DOE OSTI2021

On the computational solution of vector-density based continuum dislocation dynamics models: A comparison of two plastic distortion and stress update algorithms

Continuum dislocation dynamics models of mesoscale plasticity consist of dislocation transport-reaction equations coupled with crystal mechanics equations. The coupling between these two sets of equations is such that dislocation transport gives rise to the evolution of plastic distortion (strain), while the evolution of the latter fixes the stress from which the dislocation velocity field is found via a mobility law. Earlier solutions of these equations employed a staggered solution scheme for the two sets of equations in which the plastic distortion was updated via time integration of its rate, as found from Orowan's law. In this work, we show that such a direct time integration scheme can suffer from accumulation of numerical errors. We introduce an alternative scheme based on field dislocation mechanics that ensures consistency between the plastic distortion and the dislocation content in the crystal. The new scheme is based on calculating the compatible and incompatible parts of the plastic distortion separately, and the incompatible part is calculated from the current dislocation density field. Stress field and dislocation transport calculations were implemented within a finite element based discretization of the governing equations, with the crystal mechanics part solved by a conventional Galerkin method and the dislocation transport equations by the least squares method. A simple test was first performed to show the accuracy of the two schemes for updating the plastic distortion, which shows that the solution method based on field dislocation mechanics is more accurate. This method then was used to simulate an austenitic steel crystal under uniaxial loading and multiple slip conditions. By considering dislocation interactions caused by junctions, a hardening rate similar to discrete dislocation dynamics simulation results was obtained. Finally, the simulations show that dislocations exhibit some self-organized structures as the strain is increased.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Reduction of efficiency droop in c -plane InGaN/GaN light-emitting diodes using a thick single quantum well with doped barriers

We report on c-plane InGaN/GaN single quantum well (QW) light-emitting diodes (LEDs) of different well widths (3 or 9 nm) with and without doped barriers. QW barriers were doped with the aim of reducing the internal electric field (F QW ) in the QW to increase the electron-hole overlap, therefore increasing the recombination rates and resulting in the reduction of the efficiency droop. We, indeed, observed, through biased photocurrent spectroscopy, a reduction in F QW with doped barriers, with F QW being in the same direction of the p-n junction field at zero bias as opposed to the junction field for LEDs without doped barriers. Even with the improvement in the ground state wavefunction overlap, the ground state transition rate remains low for thick QWs. Transitions through excited states were observed for both thick QW LEDs with and without doped barriers. Here, the thick QW LED without doped barriers displayed low external quantum efficiency (EQE), likely as a result of the carrier overflow due to the poor confinement of carriers in the excited states. On the other hand, for LEDs with doped barriers, the flatter band in the QW resulting from the lower F QW reduces the energy separation between the eigenstates, leading to better confinement of carriers in the excited states. With doped barriers, we demonstrated a low efficiency droop 9-nm-thick single QW LED with a peak EQE of 42% at 40 A/cm 2 and an EQE of 36% at 400 A/cm 2 .

42 ENGINEERING↗

DOE OSTI2024

Photovoltaic effect on silicon–alumina–ferromagnet tunnel junction providing insights about spin-dependent molecular spintronics solar cells

The study focuses on the observation of the photovoltaic (PV) effect on Si/AlOx/FM semiconductor–insulator–ferromagnetic metal (SIFM) structure. Utilization of ~10 nm NiFe film as the top ferromagnet (FM) layer was permeable for sufficient light radiation necessary for reaching the silicon substrate for the generation of electron–hole pairs upon photoexcitation. The effect of light intensity and magnetic field was studied on the SIFM’s PV response. We also investigated the role of silicon doping and the AlOx tunnel barrier between Si and FM in exploring suitable band bending necessary for separating the electron–hole pairs. Increasing the dopant density in Si and a damaged AlOx tunnel barrier quenched the PV effect. Ferromagnet/Insulator/Ferromagnet (FMIFM) was also studied to gain deeper mechanistic insights into the spin-dependent photovoltaic effect observed on FM/AlOx/FM tunnel junction-based molecular spintronics devices. Bridging of magnetic molecules between the Si and FM electrodes of SIFM increased the overall device current by establishing additional parallel conduction channels along with the AlOx tunnel barrier. However, SIFM with molecular conduction channels did not produce a PV effect. This study reported the PV effect on well-designed SIFM and opened possibilities for exploring new systems. More importantly, this paper provided insights into the role of molecule-induced exchange coupling in transforming an ordinary, cheap, and widely available ferromagnet into a semiconductor-like material capable of showing PV.

14 SOLAR ENERGY↗

DOE OSTI2023

In situ embedment of type K sheathed thermocouples with directed energy deposition

Advanced nuclear reactor systems require new technologies for heat transfer and system monitoring. Additive manufacturing (AM) offers the design flexibility to allow in-situ sensor embedment through smart manufacturing for real-time monitoring, and performance of these systems. Here, this study focuses on experiments investigating the feasibility of in-situ sensor embedment using directed energy deposition (DED). Type K thermocouples are embedded into 316L stainless steel (SS) samples using two different configurations (e.g., exposed and embedded tips) and two designs (e.g., flush to substrate) within an AM base. Embedded sensor samples are analyzed via in-situ measurements and high-temperature performance validation tests at 350ºC and 900ºC. Temperature performance results at both temperature tests show good agreement with manufacturer specifications proving that these sensors could still capture accurate temperature readings after in-situ embedment during DED processing. An additional optimization experiment was conducted on the exposed tip configuration using a surrogate thermocouple to improve tolerances and the embedment process. Results improved tolerances, lower porosity, smaller gaps between the sensor and base, and better junction contact for the sensor. Although further optimization of this embedment strategy is necessary to improve the structural stability and tolerances within the component, this research strategy provides a proof-of-feasibility for DED embedment with commercial sheathed thermocouples. This research provides early impact on embedment of sensor for multiple materials and complex geometric components..

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Electrochemically induced metal- vs. ligand-based redox changes in mackinawite: identification of a Fe 3+ - and polysulfide-containing intermediate

Under anaerobic conditions, ferrous iron reacts with sulfide producing FeS, which can then undergo a temperature, redox potential, and pH dependent maturation process resulting in the formation of oxidized mineral phases, such as greigite or pyrite. A greater understanding of this maturation process holds promise for the development of iron-sulfide catalysts, which are known to promote diverse chemical reactions, such as H + , CO 2 and NO 3 - reduction processes. Hampering the full realization of the catalytic potential of FeS, however, is an incomplete knowledge of the molecular and redox processess ocurring between mineral and nanoparticulate phases. Here, we investigated the chemical properties of iron-sulfide by cyclic voltammetry, Raman and X-ray absorption spectroscopic techniques. Tracing oxidative maturation pathways by varying electrode potential, nanoparticulate n(Fe 2+ S 2- ) (s) was found to oxidize to a Fe 3+ containing FeS phase at -0.5 V vs. Ag/AgCl (pH = 7). In a subsequent oxidation, polysulfides are proposed to give a material that is composed of Fe 2+ , Fe 3+ , S 2- and polysulfide (S n 2- ) species, with its composition described as Fe 2+ 1-3x Fe 3+ 2x S 2- 1-y (S n 2- ) y . Thermodynamic properties of model compounds calculated by density functional theory indicate that ligand oxidation occurs in conjunction with structural rearrangements, whereas metal oxidation may occur prior to structural rearrangement. These findings together point to the existence of a metastable FeS phase located at the junction of a metal-based oxidation path between FeS and greigite (Fe 2+ Fe 3+ 2 S 2- 4 ) and a ligand-based oxidation path between FeS and pyrite (Fe 2+ (S 2 ) 2- ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Quantifying the dislocation content of atomically resolved grain boundary line defects using the Nye tensor

The Nye tensor, which quantifies the density of Burgers vector for a given dislocation line direction, can be effectively used to characterize dislocation content in bulk crystals from atomic-resolution transmission electron microscopy images. The Nye tensor can be calculated from these images, in part because the reference state is simply defined by the lattice of the perfect crystal. The application of the Nye tensor to interfacial line defects, for which the natural reference state is the dichromatic pattern of the two grains in their reference orientation, poses additional challenges. In this work, we present a method that employs the Nye tensor to characterize the edge dislocation content of line defects at grain boundaries from atomic-resolution images. This approach enables us to rapidly characterize all edge dislocation content along a grain boundary. Additionally, the Nye tensor provides information about line defect core structure. Finally, we demonstrate this method on two exemplar defects: a twin boundary disconnection and a facet junction in face-centered cubic Au.

Crystallographic defects↗