Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inp”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Probing the local electronic structure of isovalent Bi atoms in InP

Cross-sectional scanning tunneling microscopy (X-STM) is used to experimentally study the influence of isovalent Bi atoms on the electronic structure of InP. In this work, we map the spatial pattern of the Bi impurity state, which originates from Bi atoms down to the sixth layer below the surface, in topographic, filled-state X-STM images on the natural {110} cleavage planes. The Bi impurity state has a highly anisotropic bowtielike structure and extends over several lattice sites. These Bi-induced charge redistributions extend along the $\langle$110$\rangle$ directions, which define the bowtielike structures we observe. Local tight-binding calculations reproduce the experimentally observed spatial structure of the Bi impurity state. In addition, the influence of the Bi atoms on the electronic structure is investigated in scanning tunneling spectroscopy measurements. These measurements show that Bi induces a resonant state in the valence band, which shifts the band edge toward higher energies. Furthermore, we show that the energetic position of the Bi-induced resonance and its influence on the onset of the valence band edge depend crucially on the position of the Bi atoms relative to the cleavage plane.

74 ATOMIC AND MOLECULAR PHYSICS↗

Clean quantum point contacts in an InAs quantum well grown on a lattice-mismatched InP substrate

Strong spin-orbit coupling, the resulting large g factor, and small effective mass make InAs an attractive material platform for inducing topological superconductivity. The surface Fermi level pinning in the conduction band enables highly transparent ohmic contact without excessive doping. In this study, we investigate electrostatically defined quantum point contacts (QPCs) in a deep-well InAs two-dimensional electron gas. Despite the 3.3% lattice mismatch between the InAs quantum well and the InP substrate, we report clean QPCs with up to eight pronounced quantized conductance plateaus at zero magnetic field. Source-drain dc bias spectroscopy reveals a harmonic confinement potential with a nearly 5 meV subband spacing. We find a many-body exchange interaction enhancement for the out-of-plane g factor |$g^{*}_{⊥}$|=27±1 , whereas the in-plane g factor is isotropic |$g^{*}_{x}$|=|$g^{*}_{y}$|=12±2 , close to the bulk value for InAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Supercontinuum generation in oxide and semiconductor materials (InP, Si, GaN, GaAs, PbMoO 4 , YVO 4 , ZGP, TiO 2 , diamond) pumped by radiation of the Cr:ZnS fs-MOPA system

Ultrashort light sources in the middle-infrared range are highly beneficial for applications such as gas molecular spectroscopy, remote sensing, atmospheric science, medical treatments, and light–matter interaction studies. Ultrafast lasers utilizing chromium-doped ZnS/Se (Cr:ZnS/Se) have proven to be robust and stable solutions within this spectral region. Nonlinear spectral broadening is fundamentally important, as it pushes the pulse duration limits imposed by the bandwidth of laser media. In this study, we demonstrate the spectral broadening and supercontinuum generation in several bulk materials, including InP, Si, GaN, GaAs, PbMoO 4 , YVO 4 , diamond, and TiO 2 , using pump radiation with up to 4 W average power centered at 2.35 µm from a Cr:ZnS femtosecond MOPA system. Some of the investigated materials have excellent potential as effective media for middle-infrared supercontinuum generation, demonstrating the feasibility of developing a single-cycle pulse middle-infrared laser system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tropospheric and stratospheric wildfire smoke profiling with lidar: mass, surface area, CCN, and INP retrieval

We present retrievals of tropospheric and stratospheric height profiles of particle mass, volume, surface area, and number concentrations in the case of wildfire smoke layers as well as estimates of smoke-related cloud condensation nuclei (CCN) and ice-nucleating particle (INP) concentrations from backscatter lidar measurements on the ground and in space. Conversion factors used to convert the optical measurements into microphysical properties play a central role in the data analysis, in addition to estimates of the smoke extinction-to-backscatter ratios required to obtain smoke extinction coefficients. The set of needed conversion parameters for wildfire smoke is derived from AERONET observations of major smoke events, e.g., in western Canada in August 2017, California in September 2020, and southeastern Australia in January–February 2020 as well as from AERONET long-term observations of smoke in the Amazon region, southern Africa, and Southeast Asia. The new smoke analysis scheme is applied to CALIPSO observations of tropospheric smoke plumes over the United States in September 2020 and to ground-based lidar observation in Punta Arenas, in southern Chile, in aged Australian smoke layers in the stratosphere in January 2020. These case studies show the potential of spaceborne and ground-based lidars to document large-scale and long-lasting wildfire smoke events in detail and thus to provide valuable information for climate, cloud, and air chemistry modeling efforts performed to investigate the role of wildfire smoke in the atmospheric system.

54 ENVIRONMENTAL SCIENCES↗

InP and GaAs characterization with variable stoichiometry obtained by molecular spray

Both InP and GaAs surfaces were studied in parallel. A molecular spray technique was used to obtain two semiconductor surfaces with different superficial compositions. The structures of these surfaces were examined by electron diffraction. Electron energy loss was measured spectroscopically in order to determine surface electrical characteristics. The results are used to support conclusions relative to the role of surface composition in establishing a Schottky barrier effect in semiconductor devices.

Massies, J.↗

LPE growth of 1.3 micron InGaAsP CW lasers on /110/ InP substrates

A description is presented of the liquid-phase epitaxial (LPE) growth of high-quality InGaAsP/InP continuous-wave (CW) laser structures on (110) InP substrates using conventional LPE without the need for special growth procedures. Double heterojunction laser structures were grown using the LPE supercooling method with a horizontal sliding boat. Low broad-area current densities (970 A/sq cm) and CW operation achieved at room temperature indicate that results comparable to up-to-date devices may be achieved. The inherent tendency for surface planarity maintenance due to the perfect surface stoichiometry of the (110) surface is a feature that may lend itself to the generation of improved interface growth in quaternary III-V and related semiconductor alloy systems. The similar cross-sectional appearance of structures grown on (110) and (100) orientations show that conventional LPE can be used with (110) surface planes without introducing special growth procedures.

Hawrylo, F. Z.↗

InGaAsP CW Lasers on (110) InP Substrates

Quality InGaAsP/InP CW laser structures grown by conventional liquidphase epitaxy on (110) InP substrates without using special growth procedures. Improved surface quality and grown-layer morphology are attributable to nearlyperfect surface stoichiometry of (110) surface which makes available equal numbers of In and P deposition sites.

Hawrylo, F. Z.↗

The INPE handouts to the 6th LANDSAT Technical Working Group (LTWG) Meeting

LANDSAT receiving and processing system in its present configuration and status are described, as well as the experience already obtained with LANDSATs 4 and 5. The revised table of station plans for TM reception and products and of implementation schedule for data formats employing superstructure conventions is updated. Standardization of the worldwide reference systems is proposed. The INPE preliminary TM products price list is included. A TM image received and processed is shown to illustrate the appearance of the products offered.

Debarrosaguirre, J. L.↗

Plasma deposited diamondlike carbon on GaAs and InP

The properties of diamond like carbon films grown by RF flow discharge 30 kHz plasma using methane are reported. The Cls XPS line shape of films showed localized hybrid carbon bonds as low as 40 to as high as 95 percent. Infrared spectroscopy and N(15) nuclear reaction profiling data indicated 35 to 42 percent hydrogen, depending inversely on deposition temperature. The deposition rate of films on Si falls off exponentially with substrate temperature, and nucleation does not occur above 200 C on GaAs and InP. Optical data of the films showed bandgap values of 2.0 to 2.4 eV increasing monotonically with CH4 flow rate.

Warner, J. D.↗

Experiences with digital processing of images at INPE

Four different research experiments with digital image processing at INPE will be described: (1) edge detection by hypothesis testing; (2) image interpolation by finite impulse response filters; (3) spatial feature extraction methods in multispectral classification; and (4) translational image registration by sequential tests of hypotheses.

Mascarenhas, N. D. A.↗

Photoenhanced thermal oxidation of InP

The growth rate of laser-photoenhanced thermally grown native oxides of InP in a N2O ambient and its dependence on growth condition are presented. Increased laser power, substrate temperature, and N2O pressure are observed to increase the growth rate. The topography and the composition of these oxides have been studied using secondary electron microscopy and X-ray photoemission spectroscopy, respectively. The oxide layers contain In2O3 and a phosphate, probably InPO4. The enhanced growth appears to be caused by both excited oxidizing species and a photon-enhanced surface reaction.

Fathipour, M.↗

Plasma deposited hydrogenated carbon on GaAs and InP

The properties of diamond like carbon films grown by RF flow discharge 30 kHz plasma using methane are reported. The Cis XPS line shape of films showed localized hybrid carbon bonds as low as 40 to as high as 95 percent. Infrared spectroscopy and N(15) nuclear reaction profiling data indicated 35 to 42 percent hydrogen, depending inversely on deposition temperature. The deposition rate of films on Si falls off exponentially with substrate temperature, and nucleation does not occur above 200 C on GaAs and InP. Optical data of the films showed bandgap values of 2.0 to 2.4 eV increasing monotonically with CH4 flow rate.

Warner, J. D.↗

Growth and characterization of epitaxial SrF2 on InP(100)

The epitaxial growth of 100-262.5-nm SrF2 films on n-type and p-type (100)InP in a conventional baked UHV system at base pressure about 200 ptorr, temperature 250-350 C, and growth rate from less than 100 to about 200 pm/s. Substrates are chemicomechanically polished, degreased, bombarded with 500-eV Ar ions for 3-4 min at 350 C, and annealed for 23-30 min at 350 C, producing a slightly In-rich (In/P = 1.02) In-island-free surface with a (4 x 1) or (1 x 1) LEED structure. Films grown at 350 C and less than 100 pm/s are found to be smooth and free of cracks in most cases, with a highly faceted (1 x 1) LEED structure. The electrical properties of the SrF2 films are found to be acceptable only when the ohmic contacts are applied prior to the substrate prior to SrF2 growth.

Sinharoy, S.↗

Solar cells in bulk InP using an open tube diffusion process

A simple open tube diffusion technique for the fabrication of n+p junction solar cells is described. Large area (greater than 0.25 square cm) solar cells have been made by this process with a photovoltaic conversion efficiency of 15.2 percent under simulated AMO illumination. An ideality factor is 1.04 and a saturation current density of 9.6 times 10 to the minus 16th power A/square cm have been observed for these cells. These are the lowest (best) values reported to date for diffused structures in bulk InP.

Parat, K. K.↗

P/N InP homojunction solar cells by LPE and MOCVD techniques

P/N InP homojunction solar cells have been prepared by using both liquid phase epitaxy (LPE) and metallorganic chemical vapor deposition (MOCVD) growth techniques. A heavily doped p-In sub 0.53Ga sub 0.47As contacting layer was incorporated into the cell structure to improve the fill factor and to eliminate surface spiking at the front surface. The best conversion efficiencies (total area) obtained under AM 1 illumination are 14.2 percent for a LPE cell and 15.4 percent for a MOCVD cell.

Choi, K. Y.↗

p/n InP homojunction solar cells with a modified contacting scheme by liquid phase epitaxy

p/n InP homojunction solar cells with a modified contacting scheme have been fabricated from wafers grown by liquid phase epitaxy. A p(+)-In(0.53)Ga(0.47)As contacting layer is incorporated in the cell structure to reduce contact resistance and to eliminaate surface spiking problems at the front surface. The highest conversion efficiency (total area) obtained under AM0 illumination is 15.0 percent. The corresponding open-circuit voltage, short-circuit current density, and fill factor for the best cell are 0.866 V, 29.3 mA/sq cm, and 81.0 percent, respectively.

Choi, K. Y.↗