Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “information measures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

South-North and radial traverses through the interplanetary dust cloud

Identical in situ dust detectors are flown on board the Galileo and Ulysses spacecraft. They record impacts of micrometeoroids in the ecliptic plane at heliocentric distances from 0.7 to 5.4 AU and in a plane almost perpendicular to the ecliptic from -79 deg to +79 deg ecliptic latitude. The combination of both Ulysses and Galileo measurements yield information about the radial and latitudinal distributions of micron and sub-micron sized dust in the solar system. Two types of dust particles were found to dominate the dust flux in interplanetary space: (1) Interplanetary micrometeoroids covering a wide mass range from 10(exp -16) to 10(exp -6) gr are mostly recorded inside 3 AU, and at latitudes below 30 deg; and (2) Interstellar grains with masses between 10(exp -14) and 10(exp -12) gr have been positively identified outside 3 AU near the ecliptic plane and outside 1.8 AU at high ecliptic latitudes (> 50 deg). Interstellar grains move on hyperbolic trajectories through the planetary system and constitute the dominant dust flux (1.5 x 10(exp -4)/ sq m sec) in the outer solar system and at high ecliptic latitudes. In order to compare and analyze the Galileo and Ulysses data sets, a new model is developed based on Divine's (1993) "Five populations of interplanetary meteoroids" model. By using this model, which takes into account the measured velocities and the effect of radiation pressure on small particles, we define four populations of meteoroids on elliptical orbits plus one population on hyperbolic orbits that all can fit the micrometeoroid flux observed by Galileo and Ulysses.

Gruen, E.↗
NASA NTRS2021

Chemical Reactivity of In-Situ Lunar Dust for Biotoxicity Assessment

How does the chemical reactivity of in-situ lunar dust compare to Apollo samples currently stored in curation facilities here on Earth? Essential investigations of this question will help us to further mitigate exploration risks for future human explorers on the Moon and will also provide critical information for astrobiologists and space biologists using the Moon for scientific inquiry. Apollo 14 dust biotoxicity studies, carried out by the NASA Lunar Airborne Dust Toxicity Assessment Group (LADTAG), included numerous cellular and animal experiments. Intratracheal instillation and inhalation studies in rats both showed Apollo 14 dust to be intermediate in toxicity compared to low-tox titanium dusts and high-tox quartz dusts of similar particle sizes. The collective results were used in models to establish a safe exposure limit for astronauts. Although LADTAG took extensive steps to preserve what chemical reactivity may still have existed in the samples, it is simply unknown if they possessed true in-situ chemical reactivity or if that reactivity has decayed. Initial gas loss on collection and other alterations, and even intermittent exposure to Earth-normal conditions during subsequent decades of handling, obscure a forensic reconstruction of the initial state. Because a mineral dust’s chemical reactivity influences its biotoxicity, researchers have developed methods to “activate” lunar dust and simulants. Past studies that modeled impact processes and radiation in the lunar environment suggest that in-situ lunar dust is likely to be more chemically reactive than Earth-exposed samples. Because of these results, in-situ measurements are warranted. Since the lunar surface is heterogeneous, dust biotoxicity is expected to vary from site to site due to particle size, mineralogy, physical characteristics, degree of space weathering, and chemical reactivity. This circumstance dictates dust assessments at a suite of lunar sites enabled by CLPS opportunities. Dose, location, and duration of particle exposure will also affect biological responses. In-situ chemical reactivity measurements can inform cross-cutting collaborative research campaigns such as astrobiology studies examining regolith interactions with organisms and its ability to preserve chemical and structural biomarkers, as well as space biology investigations that examine regolith-microbe interactions relating to life support systems, plant growth, biomining, and development of regolith biocomposites.

Jon C Rask↗
NASA NTRS1971

Development of techniques for measuring pilot workload

An objective method of assessing information workload based on physiological measurements was developed. Information workload, or reserve capacity, was measured using a visual discrimination secondary task and subjective rating of task difficulty. The primary task was two axis (pitch and roll) tracking, and the independent variables in this study were aircraft pitch dynamics and wind gust disturbances. The study was structured to provide: (1) a sensitive, nonloading measure of reserve capacity, and (2) an unencumbering reliable measurement of the psychophysiological state. From these, a measured workload index (MWI) and physiological workload index (PWI) were extracted. An important measure of the success of this study was the degree to which the MWI and PWI agreed across the 243 randomly-presented, four-minute trials (9 subjects X 9 tasks X 3 replications). The electrophysiological data collected included vectorcardiogaram, respiration, electromyogram, skin impedance, and electroencephalogram. Special computer programs were created for the analysis of each physiological variable. The digital data base then consisted of 82 physiological features for each of the 243 trials. A prediction of workload based on physiological observations was formulated as a simultaneous least-squares prediction problem. A best subset of 10 features was chosen to predict the three measures of reserve capacity. The cannonical correlation coefficient was .754 with a chi squared value of 91.3 which allows rejection of the null hypothesis with p of .995.

Spyker, D. A.↗
NASA NTRS1973

A summary of selected early results from the ERTS-1 menhaden experiment

The author has identified the following significant results. Imagery from ERTS-1 satellite was used in conjunction with aerial photographically-sensed menhaden distribution information, sea truth oceanographic measurements, and commercial fishing information from a 8685 square kilometer study area in the north-central portion of the Gulf of Mexico to demonstrate relationships between selected oceanographic parameters and menhaden distribution, ERTS-1 imagery and menhaden distribution, and ERTS-1 imagery and oceanographic parameters. ERTS-1, MSS band 5 imagery density levels correlated with photographically detected menhaden distribution patterns and could be explained based on sea truth Secchi disc transparency and water depth measurements. These two parameters, together with surface salinity, Forel-Ule color, and chlorophyll-a also were found to correlate significantly with menhaden distribution. Eight empirical models were developed which provided menhaden distribution predictions for the study area on combinations of Secchi disc transparency, water depth, surface salinity, and Forel-Ule color measurements.

Stevenson, W. H.↗
NASA NTRS1971

Aircraft altitude determination using multipath information in an angle-measuring navigation satellite system

In an angle-measuring navigation satellite system using a pair of crossed interferometers located on a satellite in synchronous orbit, three parameters are needed to determine a user's position unambiguously. These are the phase differences between received signals which were transmitted by the two antennas on each of the two interferometers, and the user's altitude. The two phase difference measurements yield a line of possible user locations, and the addition of the altitude measurement reduces this line to a single point. A method is proposed which makes use of the navigation signals received after reflection off the earth's surface. The iterative procedure employs the arrival time difference between direct and reflected signals. Based on previous calculations of errors in measuring the electrical parameters it is concluded that, for North Atlantic coverage and specular reflection, altitude measurements can be made with a 1-sigma error of 65 meters.

Kurjan, D.↗
NASA NTRS1974

The use of digital techniques to examine the intermittent region of a turbulent jet

Voltage signals, sampled at a high rate in the intermittent region of a round jet, are analyzed to provide instantaneous velocity vector information and measures of the vorticity and dissipation scales. A clustering routine to assess the feasibility of using the voltage readings to define the vortical, nonvortical state of the flow is also utilized. The results indicate that the clustering routine is partially successful; more sophisticated discrimination techniques will be required for a complete specification.

Foss, J. F.↗
NASA NTRS1974

The Mariner Jupiter/Saturn ring occultation experiment

Radio occultation measurements of Saturn's rings as measured by the Mariner Jupiter/Saturn radio science experiment are reported. These signal measurements provide information on size, distribution, and density of particle material found in the rings.

Eshleman, V. R.↗
NASA NTRS1976

The anomalous thermal properties of glasses at low temperatures

While experimentally there is great regularity below 1 deg K in the behavior of a particular thermal property for all amorphous dielectrics it is not understood why these properties should differ from those of crystalline dielectrics, since it would seem that at low temperatures long-wavelength elastic waves, similar in both cases, would determine the thermal properties. A model involving systems having very few levels is used in the present study, although the relation between the model's systems and the nature of the glassy state is not known. It is shown, among other effects, that: specific heat measurements above 0.1 K indicate a distribution of local modes independent of energy; ultrasonic velocity measurements give information about phonon-local mode coupling parameters; and thermal expansion and far infrared experiments indicate a phonon-assisted tunneling model.

Pohl, R. O.↗
NASA NTRS1977

Orbiter Cloud Photopolarimeter for the Pioneer Venus mission

The Orbiter Cloud Photopolarimeter (OCPP) to be flown aboard the Pioneer Venus Orbiter spacecraft is described. This instrument, while in orbit about the planet Venus, will perform polarimetric and radiometric mapping of the Venus atmosphere in four spectral bands centered in the near ultraviolet, visible, and near infrared regions. Additionally, the instrument is equipped to provide moderate resolution imaging of the time varying cloud patterns in the near ultraviolet. In another mode of operation the instrument is capable of profiling the atmosphere at the limb of the planet to measure the particulate layering. Information resulting from these measurements is intended to provide an understanding of the global cloud dynamics and the atmospheric structure and composition on Venus. The basic operation and functional elements of the instrument are discussed. The optical configuration incorporating a polarization analyzing technique with improved accuracy is described. Long-term and short-term calibration techniques along with expected instrument performance characteristics are summarized.

Russell, E. E.↗
NASA NTRS1982

Modular Engine Instrumentation System

System that provides information and measurements never obtained before in real time has been developed. System shows not only real-time measurements but also results of computations of key combustion parameters in meaningful and easily understood display. Standard commercially-available shaft encoder plus data from pressure transducer act as principal drivers to device. Eventually, modular system could be developed into onboard controller for automobile engines.

Rice, W. J.↗
NASA NTRS1981

Data acquisition and analysis of range-finding systems for spacing construction

For space missions of future, completely autonomous robotic machines will be required to free astronauts from routine chores of equipment maintenance, servicing of faulty systems, etc. and to extend human capabilities in hazardous environments full of cosmic and other harmful radiations. In places of high radiation and uncontrollable ambient illuminations, T.V. camera based vision systems cannot work effectively. However, a vision system utilizing directly measured range information with a time of flight laser rangefinder, can successfully operate under these environments. Such a system will be independent of proper illumination conditions and the interfering effects of intense radiation of all kinds will be eliminated by the tuned input of the laser instrument. Processing the range data according to certain decision, stochastic estimation and heuristic schemes, the laser based vision system will recognize known objects and thus provide sufficient information to the robot's control system which can develop strategies for various objectives.

Shen, C. N.↗
NASA NTRS1981

Galactic disk absorption lines in the spectrum of the quasar 3C 273

It is pointed out that the line of sight to 3C 273 is unique because of the possibility of obtaining both radio and optical absorption line measurements. This information may make it possible to understand in detail the structure of the interstellar medium along the line of sight. To take advantage of this possibility, high-resolution optical spectra were obtained of 3C 273. The observations were made using the echelle spectrograph at the Cassegrain focus of the 4 m telescope at the Cerro Tololo Inter-American Observatory in 1980 January. Both Na D and Ca K lines were obtained on the same plate. In the visual lines, the galactic disk absorption shows a main component at 20 km/sec with a trailing wing in the negative velocities.

Cowie, L. L.↗
NASA NTRS1982

Dynamic modeling of structures from measured complex modes

A technique is presented to use a set of identified complex modes together with an analytical mathematical model of a structure under test to compute improved mass, stiffness and damping matrices. A set of identified normal modes, computed from the measured complex modes, is used in the mass orthogonality equation to compute an improved mass matrix. This eliminates possible errors that may result from using approximated complex modes as normal modes. The improved mass matrix, the measured complex modes and the higher analytical modes are then used to compute the improved stiffness and damping matrices. The number of degrees-of-freedom of the improved model is limited to equal the number of elements in the measured modal vectors. A simulated experiment shows considerable improvements, in the system's analytical dynamic model, over the frequency range of the given measured modal information.

Ibrahim, s. R.↗
NASA NTRS1982

Energetic interplanetary nucleon flux anisotropies - The effect of earth's bow shock and magnetosheath on sunward flow

Attention is given to the combined, average effects of the bow shock and magnetosheath on the diffusive flow of interplanetary nuclei. The observations presented show that differences between 'connected' and 'unconnected' data subsets are apparent from the beginning of the analysis. Through an investigation of the mean unconnected diffusive anisotropy (those fluxes least affected by the earth's bow shock and magnetosheath) it is confirmed that the cross-field transport of MeV energy nuclei in interplanetary space is statistically significant and in the direction expected from the large-scale particle flux gradients. The direction of particle flow relative to the IMF is then used to show that nucleon flow characteristics on connected IMF differ from those on unconnected IMF. A scenario for producing this difference is then presented. It is concluded that the inclusion of the bow shock connected information biases measurements of the flux anisotropies of MeV energy H.

Christon, S. P.↗
NASA NTRS1982

A Study of Feature Extraction Using Divergence Analysis of Texture Features

An empirical study of texture analysis for feature extraction and classification of high spatial resolution remotely sensed imagery (10 meters) is presented in terms of specific land cover types. The principal method examined is the use of spatial gray tone dependence (SGTD). The SGTD method reduces the gray levels within a moving window into a two-dimensional spatial gray tone dependence matrix which can be interpreted as a probability matrix of gray tone pairs. Haralick et al (1973) used a number of information theory measures to extract texture features from these matrices, including angular second moment (inertia), correlation, entropy, homogeneity, and energy. The derivation of the SGTD matrix is a function of: (1) the number of gray tones in an image; (2) the angle along which the frequency of SGTD is calculated; (3) the size of the moving window; and (4) the distance between gray tone pairs. The first three parameters were varied and tested on a 10 meter resolution panchromatic image of Maryville, Tennessee using the five SGTD measures. A transformed divergence measure was used to determine the statistical separability between four land cover categories forest, new residential, old residential, and industrial for each variation in texture parameters.

Hallada, W. A.↗