SEARCH · Engineering Papers

Results for “identity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Temporal evolution of the solar wind and the formation of a standing shock

The temporal evolution of the solar wind from one steady state to another is explored when momentum deposition produces multiple critical points in the flow. It is shown that the wind always evolves in time to a new steady state compatible with the solution of the steady state equation of motion. However, for the same initial state and identical asymptotic momentum deposition rate, the temporal evolution pattern of the wind depends on the detailed time history of momentum addition and is therefore not unique. This feature plays an important role in the particular case when multiple (three in this study) steady states exist for identical boundary conditions; each one of these solutions is thus shown to be physically accessible. The details of the temporal evolution pattern of the wind reveal the formation of a shock discontinuity whenever the flow becomes supersonic at a critical point upstream from the initial critical point. If the flow remains supersonic at that inner critical point, the shock can become a standing one, depending on the strength and the temporal history of momentum addition. The results of this study indicate that the time scale required for the solar wind to evolve between steady states is of the order of 30-60 hours. Furthermore, the results also reveal the interesting and novel phenomenon that a standing shock is likely to develop in the inner solar wind flow within this time frame, in particular, in coronal hole regions with rapidly diverging geometries.

Habbal, S. R.↗

NASA NTRS1986

Simplified Decoding of Convolutional Codes

Some complicated intermediate steps shortened or eliminated. Decoding of convolutional error-correcting digital codes simplified by new errortrellis syndrome technique. In new technique, syndrome vector not computed. Instead, advantage taken of newly-derived mathematical identities simplify decision tree, folding it back on itself into form called "error trellis." This trellis graph of all path solutions of syndrome equations. Each path through trellis corresponds to specific set of decisions as to received digits. Existing decoding algorithms combined with new mathematical identities reduce number of combinations of errors considered and enable computation of correction vector directly from data and check bits as received.

Truong, T. K.↗

NASA NTRS1985

Protein crystal growth results from shuttle flight 51-F

The protein crystal growth (PCG) experiments run on 51-F were analyzed. It was found that: (1) sample stability is increased over that observed during the experiments on flight 51-D; (2) the dialysis experiments produced lysozyme crystals that were significantly larger than those obtained in our identical ground-based studies; (3) temperature fluctuations apparently caused problems during the crystallization experiments on 51-F; (4) it is indicated that teflon tape stabilizes droplets on the syringe tips; (5) samples survived during the reentry and landing in glass tips that were not stoppered with plungers; (6) from the ground-based studies, it was expected that equilibration should be complete within 2 to 4 days for all of these vapor-diffusion experiments, thus it appears that the vapor diffusion rates are somewhat slower under microgravity conditions; (7) drop tethering was highly successful, all four of the tethered drops were stable, even though they contained MPD solutions; (8) the PCG experiments on 51-F were done to assess the hardware and experimental procedures that are developed for future flights, when temperature control will be available. Lysozyme crystals obtained by microdialysis are considerably larger than those obtained on the ground, using the identical apparatus and procedures.

Bugg, C. E.↗

NASA NTRS1986

Large Deformation Dynamic Bending of Composite Beams

Studies were conducted on the large deformation response of composite beams subjected to a dynamic axial load. The beams were loaded with a moderate eccentricity to promote bending. The study was primarily experimental but some finite element results were obtained. Both the deformation and the failure of the beams were of interest. The static response of the beams was also studied to determine potential differences between the static and dynamic failure. Twelve different laminate types were tested. The beams were loaded dynamically with a gravity driven impactor traveling at 19.6 ft/sec and quasi-static tests were conducted on identical beams in a displacement controlled manner. For laminates of practical interest, the failure modes under static and dynamic loadings were identical. Failure in most of the laminate types occurred in a single event involving 40% to 50% of the plies. However, failure in laminates with 30 deg or 15 deg off-axis plies occured in several events. All laminates exhibited bimodular elastic properties. Using empirically determined flexural properties, a finite element analysis was reasonably accurate in predicting the static and dynamic deformation response.

Derian, E. J.↗

NASA NTRS1985

A theoretical basis for extending surface-paneling methods to transonic flow

The surface integral terms in Green's third identity are often used to solve the Prandtl-Glauert (linear potential-flow) equation with panel methods. This can be done, as in the PAN AIR code, for either subsonic or supersonic flow about complete aircraft. The extension to transonic flow is suggested by the volume integral terms of Green's third identity. The mathematical basis for this extension, without the use of body-fitted grids, is presented. Supercritical transonic results computed from a two-dimensional transonic PAN AIR research code demonstrate the method.

Erickson, L. L.↗

NASA NTRS1986

A 405-MHz, 5-beam phased array antenna

The Wave Propagation Lab. has completed the design and construction of a phased array antenna for use at 405.25 MHz for atmospheric wind profiling. The steering geometry of the sequentially switched beam is shown. The Yagi-Uda antenna elements are arranged on a square grid whose axes are 45 deg with respect to the cardinal directions. By constraining the phase difference between rows of identically phased elements to an even, integral submultiple of 360 deg, symmetries appear in the phasing maps which reduce the switching hardware. The vertical beam is generated by switching around the four beam circuitry which results in identical phasing on all of the elements. After the 18 signals are synthesized they are split and distributed about the array while maintaining proper phasing because of the symmetries. Computer simulations were employed in the design process.

Law, D. C.↗

NASA NTRS1987

Agreement between experimental and theoretical effects of nitrogen gas flowrate on liquid jet atomization

Two-phase flows were investigated by using high velocity nitrogen gas streams to atomize small-diameter liquid jets. Tests were conducted primarily in the acceleration-wave regime for liquid jet atomization, where it was found that the loss of droplets due to vaporization had a marked effect on drop size measurements. In addition, four identically designed two-fluid atomizers were fabricated and tested for similarity of spray profiles. A scattered-light scanner was used to measure a characteristic drop diameter, which was correlated with nitrogen gas flowrate. The exponent of 1.33 for nitrogen gas flowrate is identical to that predicted by atomization theory for liquid jet breakup in the acceleration-wave regime. This is higher than the value of 1.2 which was previously obtained at a sampling distance of 4.4 cm downstream of the atomizer. The difference is attributed to the fact that drop-size measurements obtained at a 2.2 cm sampling distance are less effected by vaporization and dispersion of small droplets and therefore should give better agreement with atomization theory. Profiles of characteristic drop diameters were also obtained by making at least five line-of-sight measurements across the spray at several horizontal positions above and below the center line of the spray.

Ingebo, Robert D.↗

NASA NTRS1987

Liner cooling research at NASA Lewis Research Center

Described are recently completed and current advanced liner research applicable to advanced small gas turbine engines. Research relating to the evolution of fuel efficient small gas turbine engines capable of meeting future commercial and military aviation needs is currently under way at NASA Lewis Research Center. As part of this research, a reverse-flow combustor geometry was maintained while different advanced liner wall cooling techniques were investigated and compared to a baseline combustor. The performance of the combustors featuring counterflow film-cooled (CFFC) panels, transpiration cooled liner walls (TRANS), and compliant metal/ceramic (CMC) walls was obtained over a range of simulated flight conditions of a 16:1 pressure ratio gas turbine engine and fuel/air ratios up to 0.034. All the combustors featured an identical fuel injection system, identical geometric configuration outline, and similar designed internal aerothermodynamics.

Acosta, Waldo A.↗

NASA NTRS1986

Teleparallelism as a universal connection on null hypersurfaces in general relativity

It is shown that a close relationship between the inner geometry of a null hypersurface N3 and the Newman-Penrose (NP) (1962, 1963) spin coefficient formalism exists. Projecting the null complex NP tetrad onto N3, two triads of basis vectors in N3 are obtained. The inner geometry of N3 is based on the assumption that these vectors are parallelly transported along the surface; this gives rise to the teleparallel connection as a metric nonsymmetric affine connection. The gauge freedom for the choice of the basis triads is given by the isotropy subgroup of the local Lorentz group leaving invariant the direction of the null generators of N3, and teleparallelism is determined by the equivalence class of the basis triads with respect to the global gauge group. Nine of the twelve NP coefficients are identified as the triad components of the torsion and the second fundamental form of N3. The resulting generalized Gauss-Codazzi equations are identical to nine of the NP equations, i.e., to the half of the Ricci identities. This result gives a geometrical meaning to the entire formalism. Finally a general proof of Penrose's theorem that the shear of the null generators of N3 is the only initial null datum for a gravitational field on N3 is presented.

Mazur, P. O.↗

NASA NTRS1987

Effect of composition and grain size on slow plastic flow properties of NiAl between 1200 and 1400 K

A series of about 15-micron diameter polycrystalline B2 crystal structure NiAl alloys ranging in composition from 43.9 to 52.7 Al (at. pct) have been compression tested at constant velocities in air between 1200 and 1400 K. All materials were fabricated via powder metallurgy techniques with hot extrusion as the densification process. Seven intermediate compositions were produced by blending various amounts of two master heats of prealloyed powder; in addition, a tenth alloy of identical composition, 48.25 Al, as one of the blended materials, was produced from a third master heat. Comparison of the flow stress-strain rate behavior for the two 48.25 Al alloys revealed that their properties were identical. The creep strength of materials for Al/Ni not above 1.03 was essentially equal, and deformation could be described by a single stress exponent and activation energy. Creep at low temperatures and faster strain rates is independent of grain sizes and appears to be controlled by a subgrain mechanism. However, at higher temperatures and slower strain rates, diffusional creep seems to contribute to the overall deformation rate.

Whittenberger, J. Daniel↗

NASA NTRS1987

Agreement between experimental and theoretical effects of nitrogen gas flowrate on liquid jet atomization

Two-phase flows were investigated by using high velocity nitrogen gas streams to atomize small-diameter liquid jets. Tests were conducted primarily in the acceleration-wave regime for liquid jet atomization, where it was found that the loss of droplets due to vaporization had a marked effect on drop-size measurements. In addition, four identically designed two-fluid atomizers were fabricated and tested for similarity of spray profiles. A scattered-light scanner was used to measure a characteristic drop diameter, which was correlated with nitrogen gas flowrate. The exponent of 1.33 for nitrogen gas flowrate is identical to that predicted by atomization theory for liquid jet breakup in the acceleration-wave regime. This is higher than the value of 1.2 which was previously obtained at a smapling distance of 4.4 cm downstream of the atomizer. The difference is attributed to the fact that drop-size measurements obtained at a 2.2 cm sampling distance are less affected by vaporization and dispersion of small droplets and therefore should give better agreement with atomization theory. Profiles of characteristic drop diameters were also obtained by making at least five line-of-sight measurements across the spray at several horizontal positions above and below the center line of the spray.

Ingebo, Robert D.↗

NASA NTRS1987

Liner cooling research at NASA Lewis Research Center

Acosta, Waldo A.↗

NASA NTRS1988

VLSI Architecture Of A Binary Up/Down Counter

Identical stages contain relatively-few logic gates. New algorithm simplifies design of binary up/down counter. Design suitable for very-large-scale integrated circuits. Contains simple "pipeline" array of identical cells. Programmable logic unit converts increment and decrement input signals to "U" and "D" signals required by algorithm of counter.

Hsu, In-Shek↗

NASA NTRS1988

Control law parameterization for an aeroelastic wind-tunnel model equipped with an active roll control system and comparison with experiment

Nominal roll control laws were designed, implemented, and tested on an aeroelastically-scaled free-to-roll wind-tunnel model of an advanced fighter configuration. The tests were performed in the NASA Langley Transonic Dynamics Tunnel. A parametric study of the nominal roll control system was conducted. This parametric study determined possible control system gain variations which yielded identical closed-loop stability (roll mode pole location) and identical roll response but different maximum control-surface deflections. Comparison of analytical predictions with wind-tunnel results was generally very good.

Perry, Boyd, III↗

NASA NTRS1987

Radiation characteristics of microstrip arrays with parasitic elements

Detailed experimental results on microstrip antennas consisting of one center-fed patch and several identical parasitic patches are presented. The effects of the number of elements and interelement spacing are studied for two configurations: a linear array and a five-element array. It is shown that placing identical parasitic elements adjacent to a fed patch permits broadside radiation patterns with significant enhancement in gain to be obtained without any degradation of the pattern characteristics.

Lee, R. Q.↗

NASA NTRS1988

Control law parameterization for an aeroelastic wind-tunnel model equipped with an active roll control system and comparison with experiment

Perry, Boyd, III↗

NASA NTRS1989

Multichannel, Active Low-Pass Filters

Multichannel integrated circuits cascaded to obtain matched characteristics. Gain and phase characteristics of channels of multichannel, multistage, active, low-pass filter matched by making filter of cascaded multichannel integrated-circuit operational amplifiers. Concept takes advantage of inherent equality of electrical characteristics of nominally-identical circuit elements made on same integrated-circuit chip. Characteristics of channels vary identically with changes in temperature. If additional matched channels needed, chips containing more than two operational amplifiers apiece (e.g., commercial quad operational amplifliers) used. Concept applicable to variety of equipment requiring matched gain and phase in multiple channels - radar, test instruments, communication circuits, and equipment for electronic countermeasures.

Lev, James J.↗

NASA NTRS1989

Cosmogenic helium and volatile-rich fluid in Sierra Leone alluvial diamonds

Noble gas measurements were carried out on two identical splits of a finely powdered harshly acid-washed sample derived from fragments of a single alluvial diamond from Sierra Leone, with essentially identical results obtained for both splits. Isotopic ratios for Ar, Kr, and Xe were found to be atmospheric. Their elemental abundances were high relative to published data, owing to the effect of shock implantation in the crushing step, as was verified in a supplementary experiment. No Ne was detected above the blank level. The He-3 was exceptionally abundant, while He-4 was exceptionally depleted, possibly due to the acid wash. The He-3/He-4 ratio was anomalously high at an R/Ra value of 246 + or - 16. The results support the hypothesis that the He-3 excess in diamonds is cosmogenic.

Mcconville, P.↗