Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heat of absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Asymmetric Base-Bleed Effect on Aerospike Plume-Induced Base-Heating Environment During Power-Pack Out

A computational heat transfer design methodology was developed to study tbe dual-engine linear aerospike plume-induced base-heating environment during one power-pack out, in ascent flight. It includes a three-dimensional, finite volume, viscous, chemically reacting, and pressure-based computational fluid dynamics formulation, a special base-bleed boundary condition, and a three-dimensional, finite volume, and spectral-line-based weighted-sum-of-gray-gases absorption computational radiation heat transfer formulation. A separate radiation model was used for diagnostic purposes. The computational methodology was systematically benchmarked. in this study, near-base radiative heat fluxes were computed, and they compared well with those measured during static linear aerospike engine tests. The base-heating environment of 18 trajectory points secected from three power-pack out scenarios was computed. The computed asymmetric base-heating physics were analyzed. The power-pack out condition has the most impact on convective base heating when it happens early in flight. The soume of its impact comes from the asymmetric and reduced base bleed.

Wang, Ten-See↗
NASA NTRS2004

Asymmetric Base-Bleed Effect on Aerospike Plume-Induced Base-Heating Environment

A computational heat transfer design methodology was developed to study the dual-engine linear aerospike plume-induced base-heating environment during one power-pack out, in ascent flight. It includes a three-dimensional, finite volume, viscous, chemically reacting, and pressure-based computational fluid dynamics formulation, a special base-bleed boundary condition, and a three-dimensional, finite volume, and spectral-line-based weighted-sum-of-gray-gases absorption computational radiation heat transfer formulation. A separate radiation model was used for diagnostic purposes. The computational methodology was systematically benchmarked. In this study, near-base radiative heat fluxes were computed, and they compared well with those measured during static linear aerospike engine tests. The base-heating environment of 18 trajectory points selected from three power-pack out scenarios was computed. The computed asymmetric base-heating physics were analyzed. The power-pack out condition has the most impact on convective base heating when it happens early in flight. The source of its impact comes from the asymmetric and reduced base bleed.

Wang, Ten-See↗
DOE OSTI2024

Chemistry Informed Machine Learning-Based Heat Capacity Prediction of Solid Mixed Oxides

Knowing heat capacity is crucial for modeling temperature changes with the absorption and release of heat and for calculating the thermal energy storage capacity of oxide mixtures with energy applications. The current prediction methods (ab initio simulations, computational thermodynamics, and the Neumann–Kopp rule) are computationally expensive, not fully generalizable, or inaccurate. Machine learning has the potential of being fast, accurate, and generalizable, but it has been scarcely used to predict mixture properties, particularly for mixed oxides. Here, we demonstrate a method for the generalizable prediction of heat capacity of solid oxide pseudobinary mixtures using heat capacity data obtained from computational thermodynamics and descriptors from ab initio databases. Further, models trained through this workflow achieved an error (mean absolute error of 0.43 J mol –1 K –1 ) lower than the uncertainty in differential scanning calorimetry measurements, and the workflow can be extended to predict other properties derived from the Gibbs free energy and for higher-order oxide mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

High-resolution far-infrared observations of the Ring Nebula

High spatial resolution 50 and 100 micron observations of the Ring Nebula reveal a far-infrared emission peak close to the center of the nebula where atomic and molecular emission is at a minimum. Dust in this central peak emission region is heated by direct absorption of radiation from the central star. While the dust temperature in the central peak region is about 50 K (dust emissivity index of 1.5), the temperature of the bulk of the dust located in the regions of the ionized nebular core and the neutral molecular gas is on average lower than 50 K. Ly(alpha) photons are sufficient for heating the dust grains within the nebular core. Far-infrared emission is also found from grains mixed with the molecular gas outside the main ionized nebular core.

Zhang, C. Y.↗
NASA NTRS1976

Performance and heat transfer characteristics of the laser-heated rocket - A future space transportation system

The application of advanced liquid-bipropellant rocket engine analysis techniques has been utilized for prediction of the potential delivered performance and the design of thruster wall cooling schemes for laser-heated rocket thrusters. Delivered specific impulse values greater than 1000 lbf-sec/lbm are potentially achievable based on calculations for thrusters designed for 10-kW and 5000-kW laser beam power levels. A thruster wall-cooling technique utilizing a combination of regenerative cooling and a carbon-seeded hydrogen boundary layer is presented. The flowing carbon-seeded hydrogen boundary layer provides radiation absorption of the heat radiated from the high-temperature plasma. Also described is a forced convection thruster wall cooling design for an experimental test thruster.

Shoji, J. M.↗
NASA NTRSDate not supplied

Evaluation of Coatings for the Electrodynamic Dust Shield Application on Thermal Radiators

Space dust acts as a blackbody, becoming hot if left in direct sunlight. This is a problem for thermal radiators used in space missions, where the main function is to radiate heat away from an object. If dust lands on the thermal radiator, the unit will less effectively reject heat, and it will overheat, leading to electrical or system failure. The current state-of-the-art in active dust mitigation is the Electrodynamic Dust Shield (EDS) which uses an electric field generated by alternating high positive and negative voltages (low current) to eject the charged dust off surfaces. An EDS made from copper coated Kapton is an ideal candidate to be bonded to a thermal radiator and coated with a low solar absorptance, high heat-emitter coating. This work compares the dust removal of copper-Kapton EDSs covered with different thermal radiator coatings in air and vacuum environments. The coatings include AZ-93 paint, Thermal Bright, and Solar White, a coating developed by the Applied Physics Lab (APL) at NASA Kennedy Space Center (KSC). The resistance and the thickness of the various coatings impact how well it works as an insulative layer for the EDS. Preliminary results indicate that Solar White may have better properties for dust removal and thermal rejection than the other coatings.

Krystal L. Acosta↗
NASA NTRSDate not supplied

Evaluation of Coatings for the Electrodynamic Dust Shield Application on Thermal Radiators

Dust acts as a blackbody, becoming hot if left in direct sunlight. This is a problem for thermal radiators where the main function is to radiate heat away from an object. If dust lands on the thermal radiator, the unit will less effectively reject heat, and it will overheat. This can lead to electrical or system failure. The current state-of-the-art in active dust mitigation is the Electrodynamic Dust Shield (EDS) which uses an electric field generated by alternating high positive and negative voltages (low current) to eject the charged dust off surfaces. An EDS made from copper coated Kapton is an ideal candidate to be bonded to a thermal radiator and coated with a low solar absorptance, high heat-emitter coating. This work compares the dust removal of copper-Kapton EDSs covered with different thermal radiator coatings in air and vacuum environments. The coatings include AZ-93 paint, Thermal Bright, and Solar White, a coating developed by the Applied Physics Lab (APL) at NASA Kennedy Space Center (KSC). The resistance and the thickness of the various coatings impact how well it works as an insulative layer for the EDS. Preliminary results indicate that Solar White may have better properties for dust removal and thermal rejection than the other coatings.

Krystal L Acosta↗
NASA NTRS1998

Analysis of Aerospike Plume Induced Base-Heating Environment

Computational analysis is conducted to study the effect of an aerospike engine plume on X-33 base-heating environment during ascent flight. To properly account for the effect of forebody and aftbody flowfield such as shocks and to allow for potential plume-induced flow-separation, thermo-flowfield of trajectory points is computed. The computational methodology is based on a three-dimensional finite-difference, viscous flow, chemically reacting, pressure-base computational fluid dynamics formulation, and a three-dimensional, finite-volume, spectral-line based weighted-sum-of-gray-gases radiation absorption model computational heat transfer formulation. The predicted convective and radiative base-heat fluxes are presented.

Wang, Ten-See↗
NASA NTRS2005

New Approach for Thermal Protection System of a Probe During Entry

One of the biggest challenges for any thermal protection system (TPS) of a probe is to provide a sufficient barrier for heat generated during descent in order to keep the temperature inside of the probe low enough to support operational temperature of equipment. Typically, such a goal is achieved by having the ceramic tiles and blankets like on the Space Shuttle, silicon based ablators, or metallic systems to cover the probe external surface. This paper discusses the development of an innovative technique for TPS of the probe. It is proposed to use a novel TPS which comprises thermal management of the entry vehicle. It includes: a) absorption of the heat during heat pick load by a Phase Change Material (PCM), b) separation of the compartment which contains PCM from the rest of the space vehicle by a gap with a high thermal resistance, c) maintaining temperature of the internal wall of s/c cabin temperature by transfer heat from the internal wall to the "cold" side of the vehicle and to reject heat into the space during the flight and on a ground, d) utilization of an advanced heat pipe, so called Loop Heat Pipe to transfer heat from the cabin internal wall to the cold side of the s/c and to reject the heat into environment outside of the vehicle. A Loop Heat Pipe is capable of transferring heat against gravity

Yendler, Boris↗
NASA NTRS2004

The Far-Infrared Spectrum of Arp 220

ISO/LWS grating observations of the ultraluminous infrared galaxy Arp 220 shows absorption in molecular lines of OH, H 2 0 , CH, NH, and "3, well as in the [0 I] 63 pm line and emission in the [C 111 158 pm line. We have modeled the continuum and the emission/absorption of all observed features by means of a non-local radiative transfer code. The continuum from 25 to 1300 pm is modeled AS A WARM (106 K) NUCLEAR REGION THAT IS OPTICALLY THICK IN THE FAR-INFRARED, attenuated by an extended region (size 2") that is heated mainly through absorption of nuclear infrared radiation. The molecular absorption in the nuclear region is characterized by high excitation due to the high infrared radiation density. The OH column densities are high toward the nucleus and the extended region (about 2 x 10 sup 17 cm sup-2). The H2O column density is also high toward the nucleus (2 - 10 x 1017 cm-2) and lower in the extended region. The column densities in a halo that accounts for the absorption by the lowest lying levels are similar to what are found in the diffuse clouds toward the star forming regions in the Sgr B2 molecular cloud complex near the Galactic Center. Most notable are the high column densities found for NH and NH3 toward the nucleus, with values of about 1.5 x 10supl6 cmsup-2 and about 3 x 10supl6 cmsup-2, respectively, whereas the NH2 column density is lower than about 2 x 10sup15 cmsup-2. A combination of PDRs in the extended region and hot cores with enhanced H20 photodissociation and a possible shock contribution in the nuclei may explain the relative column densities of OH and H20, whereas the nitrogen chemistry may be strongly affected by cosmic ray ionization. The [C II] 158 pm line is well reproduced by our models and its "deficit" relative to the CII/FIR ratio in normal and starburst galaxies is suggested to be mainly a consequence of the dominant non-PDR component of far- infrared radiation, ALTHOUGH OUR MODELS ALONE CANNOT RULE OUT EXTINCTION EFFECTS IN THE NUCLEI.

Gonzalez-Alfonso, Eduardo↗
NASA NTRS2005

The Far-Infrared Spectrum of Arp 220

ISO/LWS grating observations of the ultraluminous infrared galaxy Arp 220 shows absorption in molecular lines of OH, H(sub 2)O, CH, NH, and NH(sub 3), as well as in the [O I] 63 micron line and emission in the [C II] 158 micron line. We have modeled the continuum and the emission/absorption of all observed features by means of a non-local radiative transfer code. The continuum from 25 to 1300 microns is modeled as a warm (106 K) nuclear region that is optically thick in the far-infrared, attenuated by an extended region (size 2") that is heated mainly through absorption of nuclear infrared radiation. The molecular absorption in the nuclear region is characterized by high excitation due to the high infrared radiation density. The OH column densities are high toward the nucleus (2 - 6 x 10(exp 17) cm(exp -2)) and the extended region (approximately 2 x 10(exp 17) cm(exp -2)). The H(sub 2)O column density is also high toward the nucleus (2 - 10 x 10(exp 17) cm(exp -2)) and lower in the extended region. The column densities in a halo that accounts for the absorption by the lowest lying levels are similar to what are found in the diffuse clouds toward the star forming regions in the Sgr B2 molecular cloud complex near the Galactic Center. Most notable are the high column densities found for NH and NH(sub 3) toward the nucleus, with values of approximately 1.5 x 10(exp 16) cm(exp -2) and approximately 3 x 10(exp 16) cm(exp -2), respectively, whereas the NH(sub 2) column density is lower than approximately 2 x 10(exp 15) cm(exp -2). A combination of PDRs in the extended region and hot cores with enhanced H(sub 2)O photodissociation and a possible shock contribution in the nuclei may explain the relative column densities of OH and H(sub 2)O, whereas the nitrogen chemistry may be strongly affected by cosmic ray ionization. The [C II] 158 micron line is well reproduced by our models and its deficit relative to the CII/FIR ratio in normal and starburst galaxies is suggested to be mainly a consequence of the dominant non-PDR component of far-infrared radiation, although our models alone cannot rule out extinction effects in the nuclei.

Gonzalez-Alfonso, Eduardo↗
DOE OSTI2020

A microchannel shell-and-tube absorber for ammonia-water absorption

A shell-and-tube absorber with microscale geometric features that yields significant volumetric heat duties is investigated. A vertically-oriented baffled shell-and-tube heat exchanger with a tightly packed tube bundle is designed to serve as the absorber for a 10.5 kW nominal cooling capacity absorption chiller. The heat and mass transfer in this absorber is investigated experimentally at operating conditions spanning a wide range of working fluid and coupling fluid flow rates and ambient temperatures. An experimental facility is fabricated to closely simulate the operating conditions in an absorption refrigeration system. Absorption heat duties in the range of 5-15 kW are measured. In addition to operating the absorber in the baseline co-current flow configuration with premixed inlet, fluid ports are provided to enable operation in counter-current flow, where the dilute solution enters from the top and vapor enters from the bottom. The performance of these two flow configurations is compared. A preliminary heat and mass transfer model is developed to quantify the local temperatures, concentrations, and mass flow rates of the solution and vapor streams along the length of the absorber. The model predictions for total heat duty agree with the experimental results within 10% for almost all the data points, with an AAD of ~3.4%. Finally, the results of this study, along with the modeling framework, can guide further development of highly compact and efficient absorbers absorption systems.

42 ENGINEERING↗
DOE OSTI2024

Investigation on laser absorption and x-ray radiation in microstructured titanium targets heated by short-pulse relativistic laser pulses

The enhancement effect of a microstructured surface on laser absorption and characteristic K α emission has been investigated by measuring K-shell emission from titanium (Ti) targets irradiated with high-intensity ( ∼ 10 20 W cm − 2 ), subpicosecond (500 fs) laser pulses. The experimental results indicate a modest enhancement ( 1.6 × ) of K α emission from microstructured targets compared to flat foils, but with a similar intensity and profile of He α and Li-like satellites. Particle-in-cell (PIC) simulations are implemented to further understand the underlying physical processes in the laser interaction with both targets, interpreting the mechanisms responsible for the K α enhancement. The reasons for the lower-than-expected enhancement of K α emission are discussed. The rapid heating of the bulk plasma might result in the premature shutdown of K α emission before the thermalization of hot electrons or even the end of laser pulses, suggesting that the use of K α emission as a diagnostic of the hot-electron yield or relaxation could lead to a misinterpretation. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

Stellar magnetic fields. 1: The role of a magnetic field in the peculiar M giant, HD 4174

Coronal heating by resonant absorption of Alfvenic surface waves (quiescent), and magnetic tearing instabilities (impulsive), is discussed with emphasis on three principles which may have application to late-type evolved stars. (1) If sq B/8 pi greater than sq. rho V is observed 2 in a stellar atmosphere, then the observed magnetic field must originate in an interior dynamo. (2) Low mass loss rates could imply the presence of closed magnetic flux loops within the outer atmosphere which constrain hydrodynamic flows when the magnetic body forces exceed the driving forces. (3) given that such magnetic loops effect an enhancement of the local heating rate, a positive correlation is predicted between the existence of a corona and low mass loss rates. These principles are applied to the M giant star HD 4174, which is purported to have a kilogauss magnetic field. Several of its spectroscopic peculiarities are shown to be consistent with the above principles, and further observational checks are suggested.

Stencel, R. E.↗
NASA NTRS1994

On the vertical thermal structure of Io's atmosphere

A radiative-thermal conduction model for the vertical thermal structure of Io's atmosphere is developed with solar heating by SO2 absorption in UV and near-IR bands and non-local thermodynamic equilibrium (LTE) cooling by SO2 nu(sub 1), nu(sub 2), nu(sub 3), vibrational bands and rotational lines. The model predicts the existence of a mesopause in Io's atmosphere when the surface pressure exceeds approximately 10 nbar. The radiative time constant for establishing a mesosphere/mesopause on Io is only approximately 20 min, whereas the thermospheric radiative time constant is about 1 hr. These time constants are significantly shorter than the diurnal time scale and competitive with dynamic time scales. In the thermosphere when solar UV heating dominates, the asymptotic thermospheric temperature is approximately 270 K, only 140 K greater than the surface temperature because at high altiudes non-LTE cooling by SO2 rotation lines exceeds cooling in the nu(sub 2) virbrational band. Solar-heating-only modles are incapable of generating warm enough atmospheres to satisfy the observational inferences from UV and especially millimeter-wave meausrements. Joule heating driven by the penetration of Jupiter's corotational electric field into Io's conducting ionosphere is demonstrated to be the dominant heating mechanism in the subnanobar regions of Io's atmosphere with tempertures ranging from 150 to 1000 K as a function of decreasing pressure from 1 to 0.1 nbar, The asymoptotic thermospheric temperature can attain a value as high as 1800 K.

Strobel, Darrell F.↗
DOE OSTI2024

Surface and Atmospheric Heating Responses to Spectrally Resolved Albedo of Frozen and Liquid Water Surfaces

Abstract Multiple Earth system models (ESMs) discretize surface albedo into two semi‐broadbands comprising the UV/visible and near‐infrared (NIR) wavelengths. Here, we use an offline single‐column radiative transfer model to investigate the radiative effects of spectrally resolving the surface albedo. We use the Snow, Ice, and Aerosol Radiative model, extended to simulate liquid water, to calculate snow, ice, and liquid water albedo. We flux‐weight the hyperspectral albedo into the coarser spectral bands used by the atmospheric shortwave radiative transfer model. We establish representative atmospheric profiles for the three surface types and compare their shortwave fluxes and atmospheric warming rates with the spectrally resolved albedo to those calculated with the semi‐broadband approximation. Spectrally resolved surface albedo over snow and ice reduces atmospheric warming by darkening the albedo of NIR bands, correcting the too‐strong surface absorption in visible bands, and too‐weak surface absorption in shortwave infrared bands caused by the semi‐broadband approximation. We explore the effects on surface and atmospheric warming rates of varying solar zenith angle, cloud cover, relative humidity, and snow grain/air bubble radii. The semi‐broadband albedo biases can exceed 10% and 2% for the surface and atmospheric net flux respectively, being particularly strong under conditions which alter the distributions of surface insolation (i.e., cloud cover or increased atmospheric water vapor). These results show that transmitting a higher resolution spectral radiation field between the atmosphere and surface reduces biases in surface absorption and atmospheric heating present in ESMs that currently use the semi‐broadband approximation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

MEDLI2 Material Response Model Development and Validation

During the entry of Mars Science Laboratory (MSL) the heatshield was equipped with the instrumentation suite Mars Entry, Descent, and Landing Instruments (MEDLI). In-depth thermocouple (TC) data was used to reconstruct the surface heating and temperatures. Discrepancies between MEDLI’s recorded in-depth heating data and the predicted thermal response and recession led to a campaign to characterize and test Mars Entry, Descent, and Landing Instrument 2 (MEDLI2) flight lot thermal protection materials (TPS) at relevant temperatures and pressures for Martian entry conditions. This paper covers the development and validation of MEDLI2 flight lot material response models for the heatshield material Phenolic Impregnated Carbon Ablator (PICA) and the backshell material Super-Lightweight Ablator (SLA-561V). Virgin and char thermal conductivities were updated as a function of temperature and pressure in the MEDLI2 specific material response models. Other material properties such as virgin and char density, emissivity, absorptivity, and specific heat capacitance was also characterized and compared to the “Heritage” models used during the TPS design phase of Mars 2020. Fully Implicit Ablation and Thermal response (FIAT) simulations were completed using the Heritage and MEDLI2 material response models to provide evidence of the increased accuracy of the MEDLI2 model. FIAT predicted in-depth temperatures were compared to flight lot certification ground-test arc jet test data and MEDLI2 flight thermocouple data.

Material response↗
NASA NTRS1975

The development of a solar residential heating and cooling system

The MSFC solar heating and cooling facility was assembled to demonstrate the engineering feasibility of utilizing solar energy for heating and cooling buildings, to provide an engineering evaluation of the total system and the key subsystems, and to investigate areas of possible improvement in design and efficiency. The basic solar heating and cooling system utilizes a flat plate solar energy collector, a large water tank for thermal energy storage, heat exchangers for space heating, and an absorption cycle air conditioner for space cooling. A complete description of all systems is given. Development activities for this test system included assembly, checkout, operation, modification, and data analysis, all of which are discussed. Selected data analyses for the first 15 weeks of testing are included, findings associated with energy storage and the energy storage system are outlined, and conclusions resulting from test findings are provided. An evaluation of the data for summer operation indicates that the current system is capable of supplying an average of 50 percent of the thermal energy required to drive the air conditioner. Preliminary evaluation of data collected for operation in the heating mode during the winter indicates that nearly 100 percent of the thermal energy required for heating can be supplied by the system.

Source record↗