SEARCH · Engineering Papers

Results for “geophysical data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS2006

Towards the GEOSAT Follow-On Precise Orbit Determination Goals of High Accuracy and Near-Real-Time Processing

The US Navy's GEOSAT Follow-On spacecraft (GFO) primary mission objective is to map the oceans using a radar altimeter. Satellite laser ranging data, especially in combination with altimeter crossover data, offer the only means of determining high-quality precise orbits. Two tuned gravity models, PGS7727 and PGS7777b, were created at NASA GSFC for GFO that reduce the predicted radial orbit through degree 70 to 13.7 and 10.0 mm. A macromodel was developed to model the nonconservative forces and the SLR spacecraft measurement offset was adjusted to remove a mean bias. Using these improved models, satellite-ranging data, altimeter crossover data, and Doppler data are used to compute both daily medium precision orbits with a latency of less than 24 hours. Final precise orbits are also computed using these tracking data and exported with a latency of three to four weeks to NOAA for use on the GFO Geophysical Data Records (GDR s). The estimated orbit precision of the daily orbits is between 10 and 20 cm, whereas the precise orbits have a precision of 5 cm.

Lemoine, Frank G.↗

NASA NTRS1990

A compressed marine data set for geomagnetic field modeling

Some 13 million scalar magnetic field data points that have been collected from the world's ocean areas reside in the collection of the National Geophysical Data Center. In order to derive a suitable data set for modeling the geomagnetic field of the earth, each ship track is divided into 220 km segments. The distribution of the reduced data in position, time and local time is discussed. The along-track filtering process described has proved to be an effective method of condensing large numbers of shipborne magnetic data into a manageable and meaningful data set for field modeling. This process also provides the benefits of smoothing short-wavelength crystal anomalies, discarding data recorded during magnetically noisy periods, and assigning reasonable error estimates to be utilized in the least squares modeling.

Langel, R. A.↗

DOE OSTI2020

Leaf mass per area and leaf water content measurements from field survey in association with NEON AOP survey, East River, CO 2018

Leaf area, wet, and dry weights for leaf samples from sites where field sampling was conducted during the 2018 National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP) imaging spectroscopy and lidar surveys in Gunnison County, Colorado. The sampling sites were located across East River, Washington Gulch, Slate River, and Coal Creek watersheds and contained a mixture of meadow, shrub, and tree sampling sites. This data package contains the leaf area and wet and dry weights for leaves from tree and shrub sampling sites, as well as samples for meadow species present within a given sampling area. Associated data packages contain species composition information at the plot level (DOI: 10.15485/1618130), as well as additional biogeochemical, microbial, and geophysical data as they become available. For full documentation, please see associated reference.This package contains zipped folders of all scans that were used for area calculations for both sampling sites (tree/shrub, site_scans.zip) as well as representative samples from a daily sampling area of meadow species that were found in the 1 m plots (meadow_area_scans.zip). It also contains the macro code that was used in ImageJ for processing of the area calculations. Finally, it includes excel files with the area (cm2), wet weight (g), dry weight (g), leaf mass per area (LMA, g/m2), and leaf water content (%) for each set of scans.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1990

The scatterometer - Data and applications

The techniques used to extract oceanographic and meteorological parameters from satellite radar scatterometer data are described and demonstrated, primarily on the basis of Seasat data. The principles of backscatter measurement and the general relationships between wind and wave fields are summarized, and the construction of geophysical data records from scatterometer swaths is explained. Particular attention is given to surface-layer dynamics and stresses; planetary-boundary-layer dynamics; averaging methods; the estimation of heat, moisture, and CO2 flux coefficients; the determination of pressure fields; storm monitoring; synoptic-scale analysis; climate analysis; and ocean dynamics. The capabilities and potential applications of the planned ERS-1, NSCAT, and SCANSCAT satellite scatterometers are briefly indicated.

Brown, R. A.↗

NASA NTRS1991

Moderate Resolution Imaging Spectrometer (MODIS) design evolution and associated development and verification of data product efforts

The Moderate Resolution Imaging Spectrometer (MODIS) is a key observing facility to be flown on the Earth Observing System (EOS). The facility is composed of two instruments called MODIS-N (nadir) and MODIS-T (tilt). The MODIS-N is being built under contract to NASA by the Santa Barbara Research Center. The MODIS-T is being fabricated by the Engineering Directorate at the Goddard Space Flight Center. The MODIS Science Team has defined nearly 40 biogeophysical data products for studies of the ocean and land surface and properties of the atmosphere including clouds that can be expected to be produced from the MODIS instruments shortly after the launch of EOS. The ocean, land, atmosphere, and calibration groups of the MODIS Science Team are now proceeding to plan and implement the operations and facilities involving the analysis of data from existing spaceborne, airborne, and in-situ sensors required to develop and validate the algorithms that will produce the geophysical data products. These algorithm development and validation efforts will be accomplished wherever possible within the context of existing or planned national and international experiments or programs such as those in the World Climate Research Program.

Salomonson, Vincent V.↗

NASA NTRS1992

An investigation of extensional tectonics of southern California

Geologic mapping and interpretation of Landsat TM imagery has filled in a significant gap in the geologic database for southwestern Arizona and southeastern California. The new data acquired, along with interpretation of existing data, forms the basis for a proposed reconstruction of late Tertiary faults in these regions. This reconstruction integrates available geological and geophysical data to define the eastern limit of deformation related to the San Andreas fault, and has significant implications for other recently proposed reconstructions of Tertiary deformation in the region. This progress in interpreting deformation during the last 10 Ma in the region forms a foundation for developing and testing models of older deformation in this region, including the initiation of San Andreas fault system, and the interaction of Early Miocene extension in the Basin and Range with the evolving San Andreas system.

Richard, Steven M.↗

NASA NTRS1985

Extracting sea ice data from satellite SAR imagery

With the prospect operational satellite SAR's by the end of the decade, there is a clear need to develop automated algorithms for the extraction of geophysical data about sea ice from high resolution radar imagery. To this end, techniques were developed for distinguishing ice from open water and for resolving the details of deformation within areas 100 km square imaged by SEASAT SAR. The classification of ice and open water is based on the creation of two bands of lower resolution image data: local average brightness, and the local variance of brightness. In the space of these two variables, ice and open water are separated into two distinct clusters. The deformation is found on a 3.4 km mesh by local cross-correlations of the brightness. Comparison with manually determined deformation shows room for improvement in regions of high deformation by using smaller areas for cross-correlation. Th concentration and deformation data are used together to determine localized regions of the scene where open water is produced or lost.

Fily, M.↗

NASA NTRS1981

Analyze satellite-tracking laser data in order to study satellite ephemerides, solid-Earth and ocean tides and laser system performance

The decrease in the semimajor axis of Lageos is considerably larger than expected. Gravitational effects, reference system effects, solar radiation pressure, Earth albedo pressure, neutral atmospheric drag, the Poynting Robertson Effect, and electrodynamic effects were used in explaining the observations. Quick look data provided are used to determine the Earth's polar motion and length of day. This process is routine, and provides these geophysical data every five days.

Gaposchkin, E. M.↗

NASA NTRS1985

A major crustal feature in the southeastern United States inferred from the MAGSAT equivalent source anomaly field

The MAGSAT equivalent-source anomaly field evaluated at 325 km altitude depicts a prominent anomaly centered over southeast Georgia, which is adjacent to the high-amplitude positive Kentucky anomaly. To overcome the satellite resolution constraint in studying this anomaly, conventional geophysical data were included in analysis: Bouguer gravity, seismic reflection and refraction, aeromagnetic, and in-situ stress-strain measurements. This integrated geophysical approach, infers more specifically the nature and extent of the crustal and/or lithospheric source of the Georgia MAGSAT anomaly. Physical properties and tectonic evolution of the area are all important in the interpretation.

Ruder, M. E.↗

DOE OSTI2021

Development of Time Lapse VSP Integration Workflow: A Case Study at Farnsworth CO2-EOR Project

Abstract This study aims to develop a 4D Vertical Seismic Profile (VSP) integration workflow to improve the prediction of subsurface stress changes. The selected study site is a 5-spot pattern within the ongoing CO2-EOR operations at the Farnsworth Field Unit FWU in Ochiltree County, Texas. The specific pattern has undergone extensive geological and geomechanical characterization through the acquisition of 3D seismic data, geophysical well logs, and core. This workflow constrains a numerical hydromechanical model by applying a penalty function formed between "modeled" versus "observed" time-lapse compressional and shear seismic velocity changes. Analyses of geophysical logs and ultra-sonic measurements on core exhibit measurable sensitivities to changes in both fluid saturation and mean effective stress. These data are used to develop a site-specific rock physics model and stress-velocity relationship, which inform the numerical models used to generate the "modeled" portion of the penalty function. The "observed" portion of the penalty function is provided by a novel elastic full-waveform inversion of the available 3D baseline and three monitor surveys to produce high-quality estimates of time-lapse compressional and shear seismic velocity changes. The modeling workflow accounts sequentially for fluid substitution and stress impacts. Hydrodynamic and geomechanical properties of the 3D coupled numerical model are estimated through geostatistical integration of well log and core data with 3D seismic inversion products. Changes in seismic velocities due to fluid substitution are computed using the Biot-Gassmann workflow and site-specific rock physics. Stress impacts on time-lapse seismic velocity changes are modeled from the effective stress output of the hydromechanical model and are initially based on the velocity versus effective stress relationship extracted from core mechanical testing. Based on the principle of superposition of seismic wavefields, seismic velocity changes attributed to fluid substitution and that due to changes in mean effective stress are treated as linearly additive. The modeled results are upscaled using Backus averaging to reconcile scale discrepancies between the modeled and measured datasets to formulate the penalty function. This manuscript presents the forward modeling process and concludes that for the base case, the seismic velocity changes due to mean effective stress dominates over the seismic velocity changes attributed to fluid substitution because of the extensive range of the pressure perturbations. Successful minimization of this penalty function calibrates the coupled hydrodynamic geomechanical numerical model and affirms the suitability of acoustic time-lapse measurements such as 4D-VSP for geomechanical calibration.

02 PETROLEUM↗

DOE OSTI2024

A Science Gateway for the Repeatable Analysis of Machine Learning Predicted Gravity Anomalies

In recent years, deep learning has become an increasingly popular alternative for modeling in geoscience applications due to its scalability and efficiency. However, the interpretability, compute, data volume, and hyperparameter tuning requirements of deep learning models make development and monitoring difficult. Furthermore, model explainability and communicating results obtained by these models to users or domain experts is a challenge, as domain experts in geoscience also need to have a deep understanding of how those models function in order to support their scientific works. Here, we describe a science gateway and machine learning pipeline for predicting gravity anomalies from geophysical data. The gateway, built on open-source technologies, provides a holistic view of the pipeline through interactive visualizations aimed at enabling efficient exploratory data analysis. The repeatability, reproducibility, and monitoring capabilities of this overall system allow us to iterate and analyze at scale. Using this pipeline and gateway, we can repeatedly produce accurate high-resolution gravity anomaly datasets. By describing the underlying technologies, implementation, and results, here we provide a foundation for the broader adoption of science gateways into cross-cutting geoscience and machine learning research projects as a means to improve the scientific discovery and collaboration in the geophysics and computational sciences community.

58 GEOSCIENCES↗

NASA NTRS2005

Calibration Refinements in Support of MISR

The Multi-angle Imaging SpectroRadiometer (MISR) is one of five instruments on-board the EOSI Terra spacecraft, and has collected science data since March 2000. A multi-angle capability is provided by ninecameras, which view up to 70' forward and aft of the spacecraft track and enable unique geophysical retrievals. Throughout its mission, a calibration team has made periodic refinements to the process used to calibrate MISR. These have resulted in improved absolute, and band and camera-relative calibrations, as well as in derived geophysical data products. Data reprocessing is on-going, such that these refinements also improve previous data acquisitions. The calibration process is believed to be mature at this time, with no other changes anticipated. Bimonthly deployments of the on-board-calibrator continue to monitor instrument response degradations, and provide correction coefficients needed to maintain the accuracy of the radiance products.

refinements↗

DOE OSTI2021

Interactive web mapping tools and custom subsurface cross-sections for interdisciplinary geologic investigation

Using Python-based geospatial analytics, open-source web mapping technologies, geophysical data models, and subsurface stratigraphy models from the Regional Geology Geologic Framework Model database assembled by Los Alamos National Laboratory, we developed a suite of web-based geologic investigation tools to identify and understand subsurface structures and geophysical properties concerning salt and shale formations within the contiguous United States. Coupled with a web map interface, these tools allow for the interactive visualization of various geologic data and demonstrate the ability to quickly generate custom subsurface cross-sections, borehole charts, and diagrams for azimuthal orientation data. These capabilities were developed for stakeholder and researcher use to facilitate informed decision making for spent nuclear waste disposition. However, these capabilities provide a flexible model for a variety of subsurface investigation needs, and we have demonstrated this flexibility by adapting these tools to meet visualization needs for various subsurface models within a web-based platform.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS2000

A Balanced Model for Exploration of the Terrestrial Planets: Lessons from the Lunar Experience

The Moon is the only extraterrestrial rocky body for which we have a combination of surface-selected samples, high-resolution orbital photography (Lunar Orbiter), manned and robotic surface exploration (Surveyor, Apollo, Luna), and global compositional, mineralogical, and geophysical data (Galileo, Clementine, Lunar Prospector). Beginning in 1998, CAPTEM organized a series of workshops and conference sessions aimed at integrating these diverse data sets. The insights gained by bringing together scientists from the remote-sensing and sample-analysis communities have been singularly rewarding. Not least of these has been the recognition by both groups that having both kinds of data maximizes the scientific return and permits reconciling information from diverse scales and perspectives. The 20-20 hindsight of the Lunar experience thus provides important lessons; learning from mistakes as well as successes, we can derive a sensible scientific program for Mars exploration. In this abstract, we describe examples of key information from (a) in-situ geologic investigation, (b) laboratory analysis of returned samples whose geologic context and location are known, and (c) global remote sensing of mineralogy, composition, and geophysical parameters. We then show the value of integrating these diverse data sets.

Jolliff, B. L.↗

NASA NTRS1974

Remote sensing of surface parameters using Skylab S-193 radiometer/scatterometer data

This paper presents the results of the interpretation of Skylab S-193-acquired radiometer and scatterometer data in terms of the total root-mean-square slope and the dielectric constant of the surface. The location of the S-193 field of view and existing geophysical data has been used as a background. The dielectric constant and surface roughness for the Great Salt Lake Desert are predicted using a computer fit to the S-193 scatterometer data. The S-193 and S-194 radiometer data have also been used to compute the dielectric constant. The results were compared with measurements given for similar sites; a reasonable agreement was found.

Krishen, K.↗

NASA NTRS1989

Ground data system architecture for precipitation determination from space-based radar

The Tropical Rain Mapping Radar (Tramar) is proposed as an attached payload as part of the Space Station Earth Observing System Program. Tramar would measure rainfall rates, rain velocity, and rain cell areal extent in the latitude band from 30 deg S to 30 deg N for use in studies of large-scale atmospheric circulation, variations of latent heating, tropical hydrologic processes, and mesoscale precipitation systems. The Tramar science requirements, radar design, and ground data system architecture are examined, including the three-dimensional scan geometry, the radar system performance parameters, the production of earth-gridded maps, and the telemetry, sensor, radiometric, and geophysical data that would be obtained by Tramar.

Hilland, Jeffrey E.↗

NASA NTRS1974

The geochemical evolution of the moon

Evidence for and implications of homogeneous accretion of the moon are considered. Interelement ratios are used to calculate the composition of the highland crust. The rare-earth data for the highlands show a positive Eu anomaly, allowing the deduction that the interior has a negative anomaly. The Cr/Ni ratios in the highlands are considered in regard to the overall lunar abundance of the siderophile elements. These abundance data and the constraints from the heat flow measurements are next used to set limits on the bulk composition for the moon. The geochemical constraints are integrated with the petrological and geophysical data in an attempt to provide a consistent model for the geochemical evolution of the moon.

Taylor, S. R.↗

NASA NTRS1990

Geodetic and oceanographic results from the analysis of 1 year of Geosat data

The radial error model of Engelis (1987) is extended using the altimeter data obtained by the Geosat Exact Repeat Mission for simultaneous measurements of the stationary sea surface topography and geopotential coefficients. It is shown that the proper utilization of the Geosat altimeter data significantly improved the quality of field modeling at wave numbers by providing, simultaneously, the solution for improved orbits and the oceanographic information on the global scale. A new set of Geosat geophysical data records with the improved orbits was created, which also contains the values of the geoid undulation computed from a recent spherical harmonic expansion to degree 360.

Denker, Heiner↗