Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geometric modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Observations and reduction techniques of the US Coast and Geodetic Survey

The plate reduction method and other aspects of the world geodetic net are described. About one hundred stars are used as reference stars on the PAGEOS satellite plates obtained on 300mm f.1. and later 450mm f.1. Wild BC-4 cameras. The measurements are made manually now on diapositives since these can, according to experience, be measured with higher accuracy and are adjusted following a rigorous projective geometric model. The satellite images are analytically represented by a polynomial curve, of which seven fictitious points are regarded as the result from this plate. Some other aspects of the program are also discussed.

Schmid, H. H.↗
NASA NTRS1971

The improvement of star positions by photographic methods

A brief description is given of the new astrometric camera and of the program on which it is being employed. This is the photography of the southern sky so that each star appears on at least four overlapping plates. Sets of star coordinates measured on each plate are combined with a limited set of provisional meridian places to give an accurate set of relative star positions which are independent of the meridian system together with a set of residuals for each plate-star. The technique is based on a simple geometrical model of image formation on photographic plates. Current investigations are concerned with the elimination of sources of systematic deviation from this model.

Clube, S. V. M.↗
NASA NTRS1976

Doppler noise considered as a function of the signal path integration of electron density

The hypothesis is advanced that observed Doppler noise during solar conjunctions is proportional to total columnar electron content along the signal path. This assumption leads directly to a geometrical model (ISED) for observed Doppler noise which is shown to be in very good agreement with Doppler noise data accumulated during the 1975 Pioneer 10, Pioneer 11 and Helios 1 solar conjunctions. An augmented model is constructed which quantitatively indicates correlation between earth observed sunspot activity and systematic, cyclical deviations from the ISED model.

Berman, A. L.↗
NASA NTRS1976

The quantitative properties of three soft X-ray flare kernels observed with the AS&E X-ray telescope on Skylab

The physical parameters for the kernels of three solar X-ray flare events have been deduced using photographic data from the S-054 X-ray telescope on Skylab as the primary data source and 1-8 and 8-20 A fluxes from Solrad 9 as the secondary data source. The kernels had diameters of about 5-7 seconds of arc and in two cases electron densities at least as high as 0.3 trillion per cu cm. The lifetimes of the kernels were 5-10 min. The presence of thermal conduction during the decay phases is used to argue: (1) that kernels are entire, not small portions of, coronal loop structures, and (2) that flare heating must continue during the decay phase. We suggest a simple geometric model to explain the role of kernels in flares in which kernels are identified with emerging flux regions.

Kahler, S. W.↗
NASA NTRS1977

Finite element stress analysis of the human left ventricle whose irregular shape is developed from single plane cineangiocardiogram

The three-dimensional left ventricular chamber geometrical model is developed from single plane cineangiocardiogram. This left ventricular model is loaded by an internal pressure monitored by cardiac catheterization. The resulting stresses in the left ventricular model chamber's wall are determined by computerized finite element procedure. For the discretization of this left ventricular model structure, a 20-node, isoparametric finite element is employed. The analysis and formulation of the computerised procedure is presented in the paper, along with the detailed algorithms and computer programs. The procedure is applied to determine the stresses in a left ventricle at an instant, during systole. Next, a portion (represented by a finite element) of this left ventricular chamber is simulated as being infarcted by making its active-state modulus value equal to its passive-state value; the neighbouring elements are shown to relieve the 'infarcted' element of stress by themselves taking on more stress.

Ghista, D. N.↗
NASA NTRS1977

A solution to the surface intersection problem

An application-independent geometric model within a data base framework should support the use of Boolean operators which allow the user to construct a complex model by appropriately combining a series of simple models. The use of these operators leads to the concept of implicitly and explicitly defined surfaces. With an explicitly defined model, the surface area may be computed by simply summing the surface areas of the bounding surfaces. For an implicitly defined model, the surface area computation must deal with active and inactive regions. Because the surface intersection problem involves four unknowns and its solution is a space curve, the parametric coordinates of each surface must be determined as a function of the arc length. Various subproblems involved in the general intersection problem are discussed, and the mathematical basis for their solution is presented along with a program written in FORTRAN IV for implementation on the IBM 370 TSO system.

Timer, H. G.↗
NASA NTRS1978

Radial thickness variations of Orientale basin ejecta

Moore et al. (1974) measure the thickness of Orientale basin ejecta on the basis of filling of individual prebasin craters and a depth-diameter relation for fresh lunar craters. In the reported investigation the concept of filling of preexisting craters with basin ejecta is utilized somewhat differently to ascertain Orientale basin ejecta thicknesses and volume from the Cordillera ring with a radius of 450 km out to almost 2 radii. Briefly, the approach is to assume a reasonable geometric model for the form of Orientale ejecta, calculate how many pre-Orientale craters would be destroyed by the deposition of the ejecta, and match the model to Orientale crater statistics. The results of the investigation show that a radial ejecta thickness function can be derived from crater statistics.

Cordell, B. M.↗
NASA NTRS1980

Improved test methods for determining lightning-induced voltages in aircraft

A lumped parameter transmission line with a surge impedance matching that of the aircraft and its return lines was evaluated as a replacement for earlier current generators. Various test circuit parameters were evaluated using a 1/10 scale relative geometric model. Induced voltage response was evaluated by taking measurements on the NASA-Dryden Digital Fly by Wire F-8 aircraft. Return conductor arrangements as well as other circuit changes were also evaluated, with all induced voltage measurements being made on the same circuit for comparison purposes. The lumped parameter transmission line generates a concave front current wave with the peak di/dt near the peak of the current wave which is more representative of lightning. However, the induced voltage measurements when scaled by appropriate scale factors (peak current or di/dt) resulting from both techniques yield comparable results.

Crouch, K. E.↗
NASA NTRS1981

Evacuation-induced pressure differentials in multilayer insulation systems

The pressure differentials induced across three types of multilayer insulation systems during evacuation have been measured and compared with values predicted using an idealized parallel plate geometric model. The systems tested were double-aluminized Mylar with a Tissuglas or silk net spacer and crinkled single-aluminized Mylar. Test samples were circular. The influence of purge gas type, layer density, sample diameter, and temperature was systematically investigated. The experimental approach was to measure the absolute pressure history and corresponding pressure differential induced across the insulation during evacuation. The measured pressure differentials were nondimensionalized and compared with those predicted by the parallel plate model as a function of Knudsen number. It was concluded that the parallel plate model is adequate for making engineering analyses. The influence of all parameters, except layer density, is well represented by the model. Representation of the influence of layer density is less satisfactory, but can be improved by modification of the flat plate model to allow for the more obvious practical nonidealities, such as crinkling, or the presence of a net spacer.

Glassford, A. P. M.↗
NASA NTRS1981

Spectrophotometry of AM Herculis at minimum

Spectrophotometric observations of AM Her during its 1980 minimum are reported. The M dwarf in the system is revealed by its TiO bands and domination of the spectrum longward of 6000 A. The blue region of the spectrum reveals a hot, magnetic white dwarf with Zeeman-split hydrogen absorption lines, and emission lines of H, He I, and Fe II. The inferred surface magnetic field of roughly 10 to the 7th gauss permits the presence of an accretion disk in the system. Velocities and intensities of the H emission lines indicate an origin in the X-ray-heated atmosphere of the M dwarf. The continuum light variation in the red appears to result from the heating of the secondary, while the blue light variation probably results from the rotation of the bright spot at the white dwarf's magnetic pole. A self-consistent geometrical model is proposed, in which the minimum state is interpreted as a lull in the rate of accretion onto the white dwarf.

Patterson, J.↗
NASA NTRS1982

Investigation of geomagnetic field forecasting and fluid dynamics of the core

It was established that the total absolute magnetic flux crossing the core- mantle boundary has been a constant of the core motion for the last 50 years. This provides a scalar constraint that could be added to the geometric modelling procedure. The GSFC 8 8/80 model is being evaluated. The absolute magnetic flux linking the CMB to that model was plotted as a function of time during the span covered by the data, and increasing truncation level. The inclusion of the standard error of each Gauss coefficient derived from the statistics of fit in the GSFC 9/80 model is useful. The magnitude and sense (upwelling or downe welling) of vertical fluid motion adjacent to the core-mantle boundary was calculated using the model. Standard errors were found to be sufficiently small at all but one or two of the 40 or more critical points of B sub r. They do not nearly overlap the value gamma u/gamma r = 0. It is concluded that the core is upwelling and downwelling at an observationally detectable level.

Benton, E. R.↗
NASA NTRS1982

Particle acceleration at planetary bow shock waves

One property of the collisionless shocks that may be studied through a comparison of their behavior in a variety of plasma conditions at several different planets is the occurrence of MHD waves, associated with particle beams accelerated at these shocks and flowing backward to the sun. Mercury, Venus, earth and Jupiter observations of one of these wave classes show that (1) the empirical relationship between interplanetary field strength and wave frequency in the observer's rest frame is approximately true at all the planets considered, and (2) the observed frequencies are consistent with resonance with beams of ions of the same energy at each of the planets. This is, in turn, in keeping with the Sonnerup (1969) geometrical model of ion reflection at collisionless shocks. It is suggested that this ion acceleration mechanism may occur in astrophysical systems similar to the solar system, providing a source of acceleration for cosmic rays.

Hoppe, M. M.↗
NASA NTRS1982

Seasat wind and wave observations of northeast Pacific hurricane Iva, August 13, 1978

The paper examines Seasat wind and wave observations collected in the eye of hurricane Iva on August 13, 1978 in the northeast Pacific. A maximum wind speed of 25-30 m/s is observed, along with a banana-shape high-wind-speed distribution. Two-dimensional Fourier transforms of selected SAR scenes show a dominant wavefield characterized by wavelengths of 166-211 m, with a fanlike distribution of propagation directions. A simple geometric model is proposed to explain the dominant wave field in terms of prior storm intensity and location, which is combined with the Ross parametric hurricane wave model and Seasat wind and wave data to estimate a value of 43 km for the effective radial distance from the storm center to the region of maximum winds.

Gonzalez, F. I.↗
NASA NTRS1982

On the origin of the 1 keV diffuse X-ray background

Soft X-ray sky survey data for high galactic latitudes are used to constrain simple geometric models for the source of the diffuse X-ray background at 1 keV. The intensity maps show two extended and enhanced features, in Eridanus and in the direction of the galactic center, with a relatively uniform sky away from these features and an observed degree of isotropy consistent with a model in which the 0.5-1.2 keV background consists of an isotropic extragalactic component and a thick disk galactic component. A temperature of 2-3 million K and an emission pressure of 0.004 per cm to the 6th pc are derived for the galactic component from an assumed spectrum of 11E to the -1.4 power photons/sq cm s sr keV. While consistent with the data, a local, isotropically distributed source model is shown to pose physical difficulties.

Nousek, J. A.↗
NASA NTRS1982

Experiments on identification and control of inflow disturbances in contracting streams

Vorticity from all surfaces and isolated objects in the vicinity of the fan intake, including the outside surfaces of the fan housing, were identified as the major sources for disturbances leading to blade passing frequency noise. The previously proposed mechanism based on atmospheric turbulence is refuted. Flow visualization and hot wire techniques were used in three different facilities to document the evolution of various types of disturbances, including the details of the mean flow and turbulence characteristics. The results suggest that special attention must be devoted to the design of the inlet and that geometric modeling may not lead to adequate simulation of the in flight characteristics. While honeycomb type flow manipulators appear to be effective in reducing some of the disturbances, higher pressure drop devices that generate adequate turbulence, for mixing of isolated nonuniformities, may be necessary to suppress the remaining disturbances. The results are also applicable to the design of inlets of open return wind tunnels and similar flow facilities.

Lee, A. H.↗
NASA NTRS1984

Intersection of parametric surfaces using lookup tables

When primitive structures in the form of parametric surfaces are combined and modified interactively to form complex intersecting surfaces, it becomes important to find the curves of intersection. One must distinguish between finding the shape of the intersection curve, which may only be useful for display purposes, and finding an accurate mathematical representation of the curve, which is important for any meaningful geometric modeling, analysis, design, or manufacturing involving the intersection. The intersection curve between two or more parametric surfaces is important in a variety of computer-aided design and manufacture areas. A few examples are shape design, analysis of groins, design of fillets, and computation of numerically controlled tooling paths. The algorithm presented here provides a mathematical representation of the intersection curve to a specified accuracy. It also provides the database that can simplify operations such as hidden-surface removal, surface rendering, profile identification, and interference or clearance computations.

Hanna, S. L.↗
NASA NTRS1985

Isoparametric 3-D Finite Element Mesh Generation Using Interactive Computer Graphics

An isoparametric 3-D finite element mesh generator was developed with direct interface to an interactive geometric modeler program called POLYGON. POLYGON defines the model geometry in terms of boundaries and mesh regions for the mesh generator. The mesh generator controls the mesh flow through the 2-dimensional spans of regions by using the topological data and defines the connectivity between regions. The program is menu driven and the user has a control of element density and biasing through the spans and can also apply boundary conditions, loads interactively.

Kayrak, C.↗