Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “general linear methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Signal, Noise and Resolution in Linear and Nonlinear Structured-Illumination Microscopy

Structured-illumination microscopy allows widefield fluorescence imaging with resolution beyond the classical diffraction limit. Its linear form extends resolution by a factor of two, and its nonlinear form by an in-principle infinite factor, the effective resolution in practice being determined by noise. In this article, we analyze the noise properties and achievable resolution of the method from a frequency-space perspective. We develop an analytical theory for a general case of linear or nonlinear fluorescent imaging, and verify the analytical calculations with numerical simulation for a special case where nonlinearity is produced by photo-switching of fluorescent labels. We compare the performance of two alternative implementations, using either two-dimensional illumination patterns or sequentially rotated one-dimensional patterns. We show that one-dimensional patterns are advantageous in the linear case, and that in the nonlinear case two-dimensional patterns provide a slight signal-to-noise advantage under idealized conditions, but perform worse than one-dimensional patterns in the presence of non-switchable fluorescent background.

99 GENERAL AND MISCELLANEOUS↗

Quantum tensor network algorithms for evaluation of spectral functions on quantum computers

We investigate quantum algorithms derived from tensor networks to simulate the static and dynamic properties of quantum many-body systems. Using a sequentially prepared quantum circuit representation of a matrix product state (MPS) that we call a quantum tensor network (QTN), we demonstrate algorithms to prepare ground and excited states on a quantum computer and apply them to molecular nanomagnets (MNMs) as a paradigmatic example. In this setting, we develop two approaches for extracting the spectral correlation functions measured in neutron-scattering experiments: (a) a generalization of the SWAP test for computing wave function overlaps and, (b) a generalization of the notion of matrix product operators to the QTN setting which generates a linear combination of unitaries. The latter method is discussed in detail for translationally invariant spin-half systems, where it is shown to reduce the qubit resource requirements compared with the SWAP method and may be generalized to other systems. We demonstrate the versatility of our approaches by simulating spin-1/2 and spin-3/2 MNMs, with the latter being an experimentally relevant model of a Cr$^{3+}_{8}$ ring. Here, our approach has qubit requirements that are independent of the number of constituents of the many-body system and scale only logarithmically with the bond dimension of the MPS representation, making them appealing for implementation on near-term quantum hardware with mid-circuit measurement and reset.

Neutron scattering↗

Holistic fleet optimization incorporating system design considerations

The methodology described in this article enables a type of holistic fleet optimization that simultaneously considers the composition and activity of a fleet through time as well as the design of individual systems within the fleet. Often, real-world system design optimization and fleet-level acquisition optimization are treated separately due to the prohibitive scale and complexity of each problem. Importantly, this means that fleet-level schedules are typically limited to the inclusion of predefined system configurations and are blind to a rich spectrum of system design alternatives. Similarly, system design optimization often considers a system in isolation from the fleet and is blind to numerous, complex portfolio-level considerations. In reality, these two problems are highly interconnected. To properly address this system-fleet design interdependence, we present a general method for efficiently incorporating multi-objective system design trade-off information into a mixed-integer linear programming (MILP) fleet-level optimization. This work is motivated by the authors' experience with large-scale DOD acquisition portfolios. However, the methodology is general to any application where the fleet-level problem is a MILP and there exists at least one system having a design trade space in which two or more design objectives are parameters in the fleet-level MILP.

97 MATHEMATICS AND COMPUTING↗

Cosmological non-linear hydrodynamics with post-Newtonian corrections

The purpose of this paper is to present general relativistic cosmological hydrodynamic equations in Newtonian-like forms using the post-Newtonian (PN) method. The PN approximation, based on the assumptions of weak gravitational fields and slow motions, provides a way to estimate general relativistic effects in the fully non-linear evolution stage of the large-scale cosmic structures. We extend Chandrasekhar's first-order PN (1PN) hydrodynamics based on the Minkowski background to the one based on the Robertson-Walker background. We assume the presence of Friedmann's cosmological spacetime as a background. In the background we include the 3-space curvature, the cosmological constant and general pressure. In the Newtonian order and 1PN order we include general pressure, stress, and flux. We show that the Newtonian hydrodynamic equations appear naturally in the 0PN order. The spatial gauge degree of freedom is fixed in a unique manner and the basic equations are arranged without taking the temporal gauge condition. In this way we can conveniently try alternative temporal gauge conditions depending on the mathematical convenience. We investigate a number of temporal gauge conditions under which all the remaining variables are equivalently gauge invariant. We show that compared with the action-at-a-distance nature of the Newtonian gravitational potential, 1PN corrections make the propagation speed of a perturbed potential dependent on the temporal gauge condition; we show that to 1PN order the physically relevant propagation speed of gravity is the same as the speed of light. Our aim is to present the fully non-linear cosmological 1PN equations in a form suitable for implementation in conventional Newtonian hydrodynamic simulations with minimal extensions. The 1PN terms can be considered as relativistic corrections added to the well-known Newtonian equations. The proper arrangement of the variables and equations in combination with suitable gauge conditions would allow for possible future 1PN cosmological simulations to become more tractable. Our equations and gauges are arranged for that purpose. We suggest ways of controlling the numerical accuracy. The typical 1PN order terms are about 10{sup -6}-10{sup -4} times smaller than the Newtonian terms. However, we cannot rule out the possible presence of cumulative (secular) effects due to the time-delayed propagation of the relativistic gravitational field with finite speed, in contrast to the Newtonian case where changes in the gravitational field are felt instantaneously. The quantitative estimation of such effects is left for future numerical simulations. If the reader is interested in the applications of 1PN equations, she/he may go directly to section 4 of the paper after reading the introduction.

79 ASTRONOMY AND ASTROPHYSICS↗

Linear source method of characteristics in HELIOS2

The Studsvik Scandpower code HELIOS2 is a fast lattice transport code that has gained wide use for reactor fuel cycle analysis in commercial, regulatory, and research environments. It contains two transport solvers - Collision Probabilities (CP) and Method of Characteristics (MoC) - with a general geometry ability and generalized depletion for a variety of fuel types, experimental facilities, and isotope production applications. The HELIOS2 lattice code has been extended with the development of a linear source MoC option. The linear source equations are derived within the scope of the HELIOS2 general geometry and non-cyclic ray tracing. The implementation was tested for fine and coarse spatial mesh models of the 2D C5G7 MOX computational benchmark, which provides a pure and extreme test of a transport solver. The linear source yields at least comparable accuracy with reduced computational resource requirements relative to the flat-source approximation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ensemble Simulation Techniques and Fast Randomized Algorithms

The major goals of the project were to develop and analyze new ensemble simulation techniques, including trajectory stratification and preconditioned MCMC techniques, as well as develop fast numerical linear algebra techniques closely related to ensemble simulation ideas. The trajectory stratification techniques involve simulating in parallel short trajectory fragments of a Markov process confined to a specific region of space‐time and then patching together the statistics gathered to assemble estimates of very general dynamical properties. We have also developed this approach for rare event simulation and extended the techniques to applications requiring a more general framework (such as electronic structure calculations). The preconditioned MCMC techniques involve simulating multiple Markov chains in parallel and then using information from the ensemble to speed the mixing of each individual chain. The fast randomized linear algebra methods are motivated by the diffusion Monte Carlo technique, but are applicable to finding the dominant eigenvalue of (almost) general matrices. For most non‐negative matrices, the schemes result in an error (compared to the power method) that is constant in the dimension of the problem. For more general matrices, we see a very clear sublinear cost trend in computational tests.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Study of structural and electronic properties of ScN and ScAs in rocksalt and zincblende structure: A DFT approach

In this paper, we have studied the structural and electronic properties of ScN and ScAs in zincblende (ZB) and rocksalt (RS) phases. We have employed the full potential linearized augmented plane wave (FP-APW) method within the density functional theory (DFT). Generalized gradient approximation (GGA), due to Perdew-Burke-Ernzerhof (PBE) has been used to estimate the exchange-correlation functional. Our band structure results for ScN shows the metallic nature, whereas ScAs shows the semiconducting behavior. The obtained results are in excellent agreement with earlier reported data.

36 MATERIALS SCIENCE↗

High-pressure structural study of fluoro-perovskite CsCdF[subscript 3] up to 60 GPa: A combined experimental and theoretical study

The structural behavior of CsCdF{sub 3} under pressure is investigated by means of theory and experiment. High-pressure powder x-ray diffraction experiments were performed up to a maximum pressure of 60 GPa using synchrotron radiation. The cubic Pm{sub 3}{sup -} m crystal symmetry persists throughout this pressure range. Electronic structure calculations were carried out using the full-potential linear muffin-tin orbital method within the local-density approximation and the generalized gradient approximation for exchange and correlation effects. The calculated ground-state properties - the equilibrium lattice constant, bulk modulus and elastic constants - are in good agreement with experimental results. The calculations reveal that CsCdF{sub 3} is an indirect-gap insulator under ambient conditions, with the gap increasing under pressure.

36 MATERIALS SCIENCE↗

Algebraic Multigrid with Optimal Interpolation and Adaptive Smoothers (Final Report)

The project team continued with work on developing new bootstrap AMG techniques for solving symmetric and non-symmetric PDE systems. The focus of this work is to derive more reliable measures of the quality of the coarse space set than the convergence rate of the standard F-relaxation form of CR and a more robust form of interpolation than the so-called ideal form. We have successfully derived a sharp variant of CR that gives the precise convergence rate of the two-grid method using this optimal interpolation and, in addition, we derived a new Generalized Bootstrap AMG setup algorithm that uses as its main tool a multilevel eigensolver for the generalized eigenvalue problem involving the system matrix and the symmetrized smoother. In addition, the approach allows for general block smoothers with overlap. We have applied the method to scalar diffusion problems, linear elasticity, and Maxwell’s and the method shows marked improvements over existing AMG methods for these problems. In addition, the team worked with CASC members on new forms of ideal AMG interpolation.

97 MATHEMATICS AND COMPUTING↗

GMLS-Nets: A Framework for Learning from Unstructured Data

Data fields sampled on irregularly spaced points arise in many applications in the sciences and engineering. For regular grids, Convolutional Neural Networks (CNNs) have been successfully used to gaining benefits from weight sharing and invariances. We generalize CNNs by introducing methods for data on unstructured point clouds based on Generalized Moving Least Squares (GMLS). GMLS is a nonparametric technique for estimating linear bounded functionals from scattered data, and has recently been used in the literature for solving partial differential equations. By parameterizing the GMLS estimator, we obtain learning methods for operators with unstructured stencils. In GMLS-Nets the necessary calculations are local, readily parallelizable, and the estimator is supported by a rigorous approximation theory. We show how the framework may be used for unstructured physical data sets to perform functional regression to identify associated differential operators and to regress quantities of interest. The results suggest the architectures to be an attractive foundation for data-driven model development in scientific machine learning applications.

42 ENGINEERING↗

GMLS-Nets: Scientific Machine Learning Methods for Unstructured Data

Data fields sampled on irregularly spaced points arise in many applications in the sciences and engineering. For regular grids, Convolutional Neural Networks (CNNs) have been successfully used to gaining benefits from weight sharing and invariances. We generalize CNNs by introducing methods for data on unstructured point clouds based on Generalized Moving Least Squares (GMLS). GMLS is a nonparametric technique for estimating linear bounded functionals from scattered data, and has recently been used in the literature for solving partial differential equations. By parameterizing the GMLS estimator, we obtain learning methods for operators with unstructured stencils. In GMLS-Nets the necessary calculations are local, readily parallelizable, and the estimator is supported by a rigorous approximation theory. We show how the framework may be used for unstructured physical data sets to perform functional regression to identify associated differential operators and to regress quantities of interest. The results suggest the architectures to be an attractive foundation for data-driven model development in scientific machine learning applications

97 MATHEMATICS AND COMPUTING↗

A watershed-based method for environmental vulnerability assessment with a case study of the Mid-Atlantic region

The paper presents a method for environmental vulnerability assessment with a case study of the Mid-Atlantic region. The method is based on the concept of 'self-/peer-appraisal' of a watershed in term of vulnerability. The self-/peer-appraisal process is facilitated by two separate linear optimization programs. The analysis provided insights on the environmental conditions, in general, and the relative vulnerability pattern, in particular, of the Mid-Atlantic region. The suggested method offers a simple but effective and objective way to perform a regional environmental vulnerability assessment. Consequently the method can be used in various steps in environmental assessment and planning. - Highlights: Black-Right-Pointing-Pointer We present a method for regional environmental vulnerability assessment. Black-Right-Pointing-Pointer It is based on the self-/peer-appraisal concept in term of vulnerability. Black-Right-Pointing-Pointer The analysis is facilitated by two separate linear optimization programs. Black-Right-Pointing-Pointer The method provides insights on the regional relative vulnerability pattern.

54 ENVIRONMENTAL SCIENCES↗

Internal wave energy flux from density perturbations in nonlinear stratifications

Internal gravity wave energy contributes significantly to the energy budget of the oceans, affecting mixing and the thermohaline circulation. Hence it is important to determine the internal wave energy flux $\boldsymbol{J}=p\,\boldsymbol{v}$ , where $p$ is the pressure perturbation field and $\boldsymbol{v}$ is the velocity perturbation field. However, the pressure perturbation field is not directly accessible in laboratory or field observations. Previously, a Green’s function based method was developed to calculate the instantaneous energy flux field from a measured density perturbation field $\unicode[STIX]{x1D70C}(x,z,t)$ , given a constant buoyancy frequency $N$ . Here we present methods for computing the instantaneous energy flux $\boldsymbol{J}(x,z,t)$ for an internal wave field with vertically varying background $N(z)$ , as in the oceans where $N(z)$ typically decreases by two orders of magnitude from the pycnocline to the deep ocean. Analytic methods are presented for computing $\boldsymbol{J}(x,z,t)$ from a density perturbation field for $N(z)$ varying linearly with $z$ and for $N^{2}(z)$ varying as $\tanh (z)$ . To generalize this approach to arbitrary $N(z)$ , we present a computational method for obtaining $\boldsymbol{J}(x,z,t)$ . The results for $\boldsymbol{J}(x,z,t)$ for the different cases agree well with results from direct numerical simulations of the Navier–Stokes equations. Our computational method can be applied to any density perturbation data using the MATLAB graphical user interface ‘EnergyFlux’.

Mechanics↗

Half-metallic Ferromagnetism in Novel Rh{sub 2}-based Full-Heusler Alloys Rh{sub 2}FeZ (Z = Ga and In)

In this approach, we have employed the ab initio method of full-potential linearized plane waves plus local orbital based on the framework of density functional theory, within the spin generalized gradient approximation plus U (GGA+U), where U is the Hubbard correlation term for exchange-correlation potential. This method is used to predict the equilibrium structural parameters, the electronic structure, and the magnetic properties of Rh{sub 2}FeGa and Rh{sub 2}FeIn full-Heusler alloys. The structural properties result show that both Rh{sub 2}FeGa and Rh{sub 2}FeIn compounds are stable in ferromagnetic states. The spin-polarized electronic structure demonstrate that both full-Heusler compounds are half-metals with half-metallic band gap (E{sub HM}) of 0.326 eV for Rh{sub 2}FeGa alloy and 0.245 eV for Rh{sub 2}FeIn alloy, where the apparition of an indirect gap from Γ to X in minority spin is shown by these Heusler alloys. Furthermore, calculations of total magnetic moment give the value of 5 µ{sub B}, which agrees with Slater-Pauling rule; also, the atomic magnetic moment of both Rh and Fe transition metals have the same sign which depicts the ferromagnetic behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prescriptive unitarity

We introduce a prescriptive approach to generalized unitarity, resulting in a strictly-diagonal basis of loop integrands with coefficients given by specifically-tailored residues in field theory. We illustrate the power of this strategy in the case of planar, maximally supersymmetric Yang-Mills theory (SYM), where we construct closed-form representations of all (n-point N k MHV) scattering amplitudes through three loops. The prescriptive approach contrasts with the ordinary description of unitarity-based methods by avoiding any need for linear algebra to determine integrand coefficients. We describe this approach in general terms as it should have applications to many quantum field theories, including those without planarity, supersymmetry, or massless spectra defined in any number of dimensions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comparison of mesh morphing methods for shape optimization.

The ability to automatically morph an existing mesh to conform to geometry modifications is a necessary capability to enable rapid prototyping of design variations. This paper compares six methods for morphing hexahedral and tetrahedral meshes, including the previously published FEMWARP and LBWARP methods as well as four new methods. Element quality and performance results show that different methods are superior on different models. We recommend that designers of applications that use mesh morphing consider both the FEMWARP and a linear simplex based method.

99 GENERAL AND MISCELLANEOUS↗

Predicting oropharyngeal tumor volume throughout the course of radiation therapy from pretreatment computed tomography data using general linear models

Purpose: The purpose of this work was to develop and evaluate the accuracy of several predictive models of variation in tumor volume throughout the course of radiation therapy. Methods: Nineteen patients with oropharyngeal cancers were imaged daily with CT-on-rails for image-guided alignment per an institutional protocol. The daily volumes of 35 tumors in these 19 patients were determined and used to generate (1) a linear model in which tumor volume changed at a constant rate, (2) a general linear model that utilized the power fit relationship between the daily and initial tumor volumes, and (3) a functional general linear model that identified and exploited the primary modes of variation between time series describing the changing tumor volumes. Primary and nodal tumor volumes were examined separately. The accuracy of these models in predicting daily tumor volumes were compared with those of static and linear reference models using leave-one-out cross-validation. Results: In predicting the daily volume of primary tumors, the general linear model and the functional general linear model were more accurate than the static reference model by 9.9% (range: −11.6%–23.8%) and 14.6% (range: −7.3%–27.5%), respectively, and were more accurate than the linear reference model by 14.2% (range: −6.8%–40.3%) and 13.1% (range: −1.5%–52.5%), respectively. In predicting the daily volume of nodal tumors, only the 14.4% (range: −11.1%–20.5%) improvement in accuracy of the functional general linear model compared to the static reference model was statistically significant. Conclusions: A general linear model and a functional general linear model trained on data from a small population of patients can predict the primary tumor volume throughout the course of radiation therapy with greater accuracy than standard reference models. These more accurate models may increase the prognostic value of information about the tumor garnered from pretreatment computed tomography images and facilitate improved treatment management.

62 RADIOLOGY AND NUCLEAR MEDICINE↗