Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “garnet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Reciprocating magnetic refrigerator

A 4 to 15 K magnetic refrigerator to test as an alternative to the Joule-Thomson circuit as the low temperature stage of a 4 to 300 K closed-cycle refrigerator was developed. The reciprocating magnetic refrigerator consists of two matrices of gadolinium gallium garnet spheres located in tandem on a single piston which alternately moves each matrix into a 7 telsa magnetic field. A separate helium gas circuit is used as the heat exchange mechanism for the low and the high temperature extremes of the magnetic refrigerator. Details of the design and results of the initial refrigerator component tests are presented.

Johnson, D. L.↗

Four-micron period ion-implanted bubble test circuits

Packaged magnetic bubble test circuits made with 4-micron period ion-implanted circuits were operated over -55 to +110 C. The circuits used bidirectional transfer and nondestructive detection and were made on bismuth-containing magnetic garnet films. Passivated circuits that incorporated an improved transfer conductor design were operated on films with higher Gilbert damping parameters. Potential advantages to using films with lower bubble aspect ratios for ion-implanted circuits are discussed. However nondestructive read-out detection was not realized with these 'flat' bubbles.

Nelson, T. J.↗

Effect of diamagnetic substitution on growth-induced anisotropy in (YBi)3Fe5O12

Films of (Y/3-x-y/Bi/x/Pb/y/)(Fe/5-z/Ga/z/)O12(Z = 0-1.1) and (Y/3-x-y/Bi/x/PB/y/)(Fe/5-w/In/w/)O12(w = 0-O.6) garnets were prepared by liquid-phase epitaxy. The effects of tetrahedral Ga and octahedral In substitution on the Bi-based growth-induced uniaxial anisotropy in (Ybi)3Fe5O12 films were measured. Both Ga and In resulted in a linear decrease in the anisotropy with increasing substitution. The effect of octahedral In was twice that of tetrahedral Ga.

Fratello, V. J.↗

Tunable solid state lasers for remote sensing; Proceedings of the Conference, Stanford University, CA, October 1-3, 1984

Papers are presented on solid-state lasers for remote sensing, diode-pumped Nd:YAG lasers, and tunable solid-state-laser systems. Topics discussed include titanium-sapphire tunable laser systems, the performance of slab geometry, and the development of slab lasers. Consideration is given to garnet host solid-state lasers, the growth of lasers and nonlinear materials, and nonlinear frequency conversion and tunable sources.

Byer, R. L.↗

Self-Stabilizing Storage Loops for Magnetic-Bubble Memories

Adjacent, sinusoidal loops provide defect-tolerant, self-stabilizing structures. New technology consists of three components providing self-stabilizing structures. First, apertures positioned so bubbles propagate alternately into hexagonally related positions and directly opposed positions; addition of straight barriers by ion milling or implantation of garnet adds transverse stability but leaves longitudinally metastable postions. Second, modification of barrier to sinusoidal shape provides "energy wells" in longitudinal direction at opposed positions and eliminates metastability. Third, positioning and phasing of counterrotating storage loops, provide stable hexagonal support between adjacent loops.

Nelson, Gary L.↗

Direct solar-pumped iodine laser amplifier

The improvement on the collection system of the Tarmarack Solar Simulator beam was attemped. The basic study of evaluating the solid state laser materials for the solar pumping and also the work to construct a kinetic model algorithm for the flashlamp pumped iodine lasers were carried out. It was observed that the collector cone worked better than the lens assembly in order to collect the solar simulator beam and to focus it down to a strong power density. The study on the various laser materials and their lasing characteristics shows that the neodymium and chromium co-doped gadolinium scandium gallium garnet (Nr:Cr:GSGG) may be a strong candidate for the high power solar pumped solid state laser crystal. On the other hand the improved kinetic modeling for the flashlamp pumped iodine laser provides a good agreement between the theoretical model and the experimental data on the laser power output, and predicts the output parameters of a solar pumped iodine laser.

Han, Kwang S.↗

Six micrometer period wide-gap permalloy magnetic bubble devices

This report describes the progress made toward the goal of developing a 1 Mbit bubble memory chip, based on a 6 micron period wide-gap permalloy technology. Characterization of the functions showed that the guard-rail, generator, swap, write-line, read-line and after several revisions, the replicator and the expander-detector performed acceptably in preliminary testing. Several investigations were initiated to solve the problem of low minor loop yield. A dual-spacing process, which allows the minor loop propagation elements to be more tightly coupled to the garnet film was developed. Several new propagate structures, intended to be more tolerant of small defects were also conceived.

Chirovsky, L. M. F.↗

Rare-earth substitution in (BiYCa)3(FeSiGe)5O12 bubble films

The substitution of Y by Sm, Tb, Gd, and Ho in (BiYCa)3 FeSiGe)5O12 bubble garnet is shown to have large effects on the growth-induced anisotropy (GIA). The presently accepted film composition intended for 6-or 8-micron-period bubble memory devices demands partial substitution of Y by Gd and Ho. However, comparing films grown under the same growth conditions, it is observed that YGdHoBilG films posess less (GIA) than their Gd, Ho-free counterparts. Thus, to satisfy (GIA) requirements, the supercooling during growth must be increased by 20 K to 80 K with undesirable effects on defect densities. A new film composition containing Sm, Tb, and Gd has been formulated to satisfy all known material property specifications for 6- or 8-micron-period memory devices. It can be grown with only 45-50 K supercooling.

Luther, L. C.↗

Limiting depth of magnetization in cratonic lithosphere

Values of magnetic susceptibility and natural remanent magnetization (NRM) of clino-pyroxene-garnet-plagioclase granulite facies lower crustal xenoliths from a kimberlite in west Africa are correlated to bulk geochemistry and specific gravity. Thermomagnetic and alternating-field demagnetization analyses identify magnetite (Mt) and native iron as the dominant magnetic phases (totaling not more than 0.1 vol pct of the rocks) along with subsidiary sulfides. Oxidation states of the granulites are not greater than MW, observed Mt occurs as rims on coarse (about 1 micron) Fe particles, and inferred single domain-pseudosingle domain Mt may be a result of oxidation of fine-grained Fe. The deepest limit of lithospheric ferromagnetism is 95 km, but a limit of 70 km is most reasonable for the West African Craton and for modeling Magsat anomalies over exposed Precambrian shields.

Toft, Paul B.↗

Cladding For Transversely-Pumped Laser Rod

Combination of suitable dimensioning and cladding of neodymium:yttrium aluminum garnet of similar solid-state laser provides for more efficient utilization of transversely-incident pump light from diode lasers. New design overcomes some of limitations of longitudinal- and older transverse-pumping concepts and promotes operation at higher output powers in TEM00 mode.

Byer, Robert L.↗

Pulse-Position Modulation For Optical Communication

Report discusses schemes for pulse-position modulation of neodymium: yttrium aluminum garnet (Nd:YAG) lasers for optical transmission of data between distant spacecraft and stations on Earth.

Rayman, M. D.↗

Evaluation of crustal recycling during the evolution of Archean-age Matachewan basaltic magmas

The simplest model for the Matachewan-Hearst Dike (MHD) magmas is assimilation-fractional crystallization (AFC), presumably occurring at the base of the crust during underplating. Subduction zone enriched mantle sources are not required. Trace elements suggest that the mantle sources for the MHD were depleted, but possessed a degree of heterogeneity. Rates of assimilation were approximately 0.5 (= Ma/Mc); the contaminant mass was less than 20 percent. The contaminant was dominated by tonalites-randodiorites, similar to xenoliths and rocks in the Kapuskasing Structural Zone (KSZ). Assimilation of partial melts of light-rare earth and garnet-bearing basaltic precursors may have produced some the MHD magmas. Apparently, previous underplating-AFC processes had already produced a thick crust. The silicic granitoid assimilant for the MHD magmas was probably produced by earlier processing of underplated mafic crust (4, 5, 10, 21 and 30). Calculations suggest that the derived silicic rocks possess negative Ta and Ti anomalies even though they were not the product of subduction.

Nelson, Dennis O.↗

Comparison of Archean and Phanerozoic granulites: Southern India and North American Appalachians

Archean granulites at the southern end of the Dharwar craton of India and Phanerozoic granulites in the southern Appalachians of North America share an important characteristic: both show continuous transitions from amphibolite facies rocks to higher grade. This property is highly unusual for granulite terranes, which commonly are bounded by major shears or thrusts. These two terranes thus offer an ideal opportunity to compare petrogenetic models for deep crustal rocks formed in different time periods, which conventional wisdom suggests may have had different thermal profiles. The salient features of the Archean amphibolite-to-granulite transition in southern India have been recently summarized. The observed metamorphic progression reflects increasing temperature and pressure. Conditions for the Phanerozoic amphibolite-to-granulite transition in the southern Appalachians were documented. The following sequence of prograde reactions was observed: kyanite = sillimanite, muscovite = sillimanite + K-feldspar, partial melting of pelites, and hornblende = orthopyroxene + clinopyroxene + garnet. The mineral compositions of low-variance assemblages in mafic and intermediate rocks are almost identical for the two granulite facies assemblages. In light of their different fluid regimes and possible mechanisms for heat flow augmentation, it seems surprising that these Archean and Phanerozoic granulite terranes were apparently metamorphosed under such similar conditions of pressure and temperature. Comparison with other terrains containing continuous amphibolite-to-granulite facies transitions will be necessary before this problem can be addressed.

Mcsween, Harry Y., Jr.↗

Petrology and physical conditions of metamorphism of calcsilicate rocks from low- to high-grade transition area, Dharmapuri District, Tamil Nadu

Calc-silicate rocks comprising quartz, plagioclase, diopside, sphene, scapolite, grossularite-andradite and wollastonite occur as lensoid enclaves within the greasy migmatitic and charnockitic gneisses of the Archaean amphibolite- to granulite-facies transition zone in Dharmapuri district, Tamil Nadu. The calc-silicate rocks are characterized by the absence of K-feldspar and primary calcite, presence of large modal quartz and plagioclase and formation of secondary garnet and zoisite rims around scapolite and wollastonite. The mineral distributions suggest compositional layering. The chemical composition and mineralogy of the calc-silicate rocks indicate that they were derived from impure silica-rich calcareous sediments whose composition is similar to that of pelite-limestone mixtures. From the mineral assemblages the temperature, pressure and fluid composition during metamorphism were estimated. The observed mineral reaction sequences require a range of X sub CO2 values demonstrating that an initially CO2-rich metamorphic fluid evolved with time towards considerably more H2O-rich compositions. These variations in fluid composition suggest that there were sources of water-rich fluids external to the calc-silicate rocks and that mixing of these fluids with those of calc-silicate rocks was important in controlling fluid composition in calc-silicate rocks and some adjacent rock types as well.

Narayana, B. L.↗

Gneiss-charnockite transformation at Kottavattam, Southern Kerala (India)

At Kottavattam, leucocratic granitic garnet-biotite gneisses (age less than 2 Ga) were partially transformed to coarse-grained charnockite along a system of conjugate fractures (N70E and N20W) and the foliation planes (N60 to 80W; dip 80 to 90 SW) about 550 m.y. ago. To examine and quantify changes in fabric, mineralogy, pore fluids and chemical composition associated with this process, large rock specimens showing gneiss-charnockite transition were studied in detail. The results of the present study corroborate the concept that charnockite formation at Kottavattam is an internally-generated phenomenon and was not triggered by the influx of carbonic fluids from a deep-seated source. It is suggested that charnockitization was caused by the following mechanism: (1) near-isothermal decompression during uplift of the gneiss complex led to an increase of the pore fluid pressure (P sub fluid greater than P sub lith) which - in a regime of anisotropic stress - triggered or at least promoted the development of conjugate fractures; (2) the simultaneous release of pore fluids from bursting fluid inclusions and their escape into the developing fracture system resulted in a drop of fluid pressure; and (3) the internal generation and buffering of the fluids and their, probably, limited migration in an entirely granitic rock system explains the absence of any significant metasomatic mass transfer.

Raith, M.↗

Geology and geochemistry of the Middle Proterozoic Eastern Ghat mobile belt and its comparison with the lower crust of the Southern Peninsular shield

Two prominent rock suites constitute the lithology of the Eastern Ghat mobile belt: (1) the khondalite suite - the metapelites, and (2) the charnockite suite. Later intrusives include ultramafic sequences, anorthosites and granitic gneisses. The chief structural element in the rocks of the Eastern Ghats is a planar fabric (gneissosity), defined by the alignment of platy minerals like flattened quartz, garnet, sillimanite, graphite, etc. The parallelism between the foliation and the lithological layering is related to isoclinal folding. The major structural trend (axial plane foliation trend) observed in the belt is NE-SW. Five major tectonic events have been delineated in the belt. A boundary fault along the western margin of the Eastern Ghats, bordering the low grade terrain has been substantiated by recent gravity and the deep seismic sounding studies. Field evidence shows that the pyroxene granulites (basic granulites) post-date the khondalite suite, but are older than the charnockites as well as the granitic gneisses. Polyphase metamorphism, probably correlatable with different periods of deformation is recorded. The field relations in the Eastern Ghats point to the intense deformation of the terrain, apparently both before, during and after metamorphism.

Rao, M. V. Subba↗

Generating Second Harmonics In Nonlinear Resonant Cavities

Single-axial-mode lasers pump very-low-loss doubling crystals. Important advance in making resonant generation of second harmonics possible for diode-laser-pumped solid-state lasers is recent development of monolithic nonplanar ring geometries in neodymium:yttrium aluminum garnet (Nd:YAG) lasers that produce frequency-stable single-mode outputs. Other advance is development of high-quality MgO:LiNbO3 as electro-optically nonlinear material. Series of experiments devised to improve doubling efficiency of low-power lasers, and particularly of diode-laser-pumped continuous-wave Nd:YAG lasers.

Kozlovsky, William J.↗

Long-Lifetime Laser Materials For Effective Diode Pumping

Long quantum lifetimes reduce number of diodes required to pump. Pumping by laser diodes demonstrated with such common Nd laser materials as neodymium:yttrium aluminum garnet (Nd:YAG) and Nd:YLiF4, but such materials as Nd:LaF3, Nd:NaF.9YF3, and possibly Nd:YF3 more useful because of long lifetimes of their upper laser energy levels. Cost effectiveness primary advantage of solid-state laser materials having longer upper-laser-level lifetimes. Because cost of diodes outweighs cost of laser material by perhaps two orders of magnitude, cost reduced significantly.

Barnes, Norman P.↗