Development of an improved oxygen electrode for use in alkaline H2-O2 fuel cells Quarterly report, 1 Oct. - 31 Dec. 1967
Interstitial compounds of transition metals for cathodic oxygen reduction in alkaline hydrogen oxygen fuel cells
Source record↗
SEARCH · Engineering Papers
Results for “fuel cell cathode”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Recent Studies on Methanol Crossover in Liquid-Feed Direct Methanol Fuel Cells
In this work, the effects of methanol crossover and airflow rates on the cathode potential of an operating direct methanol fuel cell are explored.
Methanol DMFC fuel cell direct methanol fuel cells↗
Call attention to using DRT and EIS to quantify the contributions of solid oxide cell components to the total impedance
The contributions of anode and cathode processes to solid oxide fuel cell (SOFC) impedance were studied using electrochemical impedance spectroscopy (EIS) and distribution of relaxation time (DRT). Specifically, the role of gas composition at both anode and cathode was explored in a systematic study aimed at deconvoluting, identifying and quantifying the contributions of different anode and cathode processes. Further, five distinct relaxation time distributions were observed in the DRT spectra; although the peaks were ascribed to diffusion and charge transfer processes at the electrodes, it was found that both electrodes contributed to various peaks at the same time. Moreover, it was found that two distinctive operating conditions could return equivalent DRT spectra. While DRT analysis allows to obtain useful information regarding cell performance, extra consideration is needed when assessing and quantifying anodic and cathodic resistances within the SOFC.
08 HYDROGEN↗
Load following power generation and power storage using REP and PEM technology
A hydrogen generation system for generating hydrogen and electrical power includes a power supply, a reformer-electrolyzer-purifier (REP) assembly including at least one fuel cell including an anode and a cathode separated by an electrolyte matrix, at least one low temperature fuel cell, and a hydrogen storage. The at least one fuel cell is configured to receive a reverse voltage supplied by the power supply and generate hydrogen-containing gas in the anode of the at least one fuel cell. The at least one low temperature fuel cell is configured to receive the hydrogen-containing gas output from the REP assembly. The at least one low temperature fuel cell is configured to selectably operate in a power generation mode in which the hydrogen-containing gas is used to generate electrical power and a power storage mode in which the hydrogen-containing gas is pressurized and stored in the hydrogen storage.
Jahnke, Fred C.↗
Development of cathodic electrocatalysts for use in low temperature H2/O2 fuel cells with an alkaline electrolyte Third quarterly report, Jan. 1 - Mar. 31, 1966
Metal, alloy, and metal compound testing for corrosion resistance and activity as oxygen electrodes for hydrox fuel cell with alkaline electrolyte
MATERIAL TESTING↗
Development of Cathodic Electrocatalysts for Use in Low Temperature 2hz/o2 Fuel Cells with an Alkaline Electrolyte Quarterly Report, 1 Jan. - 31 Mar. 1967
Carbides, nitrocarbides of nickel, cobalt alloys, and nickel-cobalt alloys evaluated for electrocatalysts in low temperature hydrogen peroxide fuel cells with alkaline electrolyte
HYDROGEN PEROXIDE↗
Development of cathodic electrocatalysts for use in low temperature H2/O2 fuel cells with an alkaline electrolyte Quarterly report 1 Oct. - 31 Dec. 1966
Carbides, nitrides, nitrocarbides, and carbonitrides of iron examined for catalytic activity in oxygen reduction reaction in potassium hydroxide - peroxide fuel cells
CATALYTIC ACTIVITY↗
Development of cathodic electrocatalysts for use in low temperature H2/O2 fuel cells with an alkaline electrolyte Quarterly report, 1 Jul. 1965 - 30 Jun. 1967
Improved oxygen electrode for alkaline hydrox fuel cells
HYDROX FUEL CELL↗
Development of cathodic electrocatalysts for use in low temperature h2/02 fuel cells with an alkaline electrolyte
Explore the source record for details and available documents.
Giner, J.↗
Study of Cathode Gas Diffusion Architecture for Improved Oxygen Transport in Hydroxide Exchange Membrane Fuel Cells
The high pH environment in hydroxide exchange membrane fuel cells (HEMFCs) has the potential to reach lower costs than the current proton exchange membrane fuel cells (PEMFCs), the incumbent technology. A significant difference between HEMFCs and PEMFCs is the location of water production within the cell. In PEMFCs, the water is produced on the cathode, limiting oxygen transport. In HEMFCs, the water is produced on the anode where the fuel is pure hydrogen. This allows the cathode to be optimized for oxygen transport without the presence of excess liquid water. Limiting current analysis, a technique previously used in PEMFCs, is adopted in HEMFCs to evaluate the oxygen mass transport resistances for different sections of the cathode. Through elimination of the microporous layer (MPL), gas diffusion layer (GDL), and traditional flow field and using porous nickel foam for gas distribution, the transport resistance at an operating condition of 150 kPa(g) and with the cell temperature at 80 °C was decreased from 112 s m −1 to 48 s m −1 , effectively halved. The optimal configuration for performance was found with Ni foam and a GDL, eliminating the MPL and traditional flow field, which vastly improved oxygen transport while maintaining adequate electrical contact with the cathode catalyst layer.
25 ENERGY STORAGE↗
(La 0.8 Sr 0.2 ) 0.98 MnO 3-δ -Zr 0.92 Y 0.16 O 2-δ :PrOx for oxygen electrode supported solid oxide cells
(La 0.8 Sr 0.2 ) 0.98 MnO 3-δ (LSM)- Zr 0.92 Y 0.16 O 2-δ (YSZ) has been widely studied as the cathode for solid oxide fuel cells (SOFCs), but its low activity has been a cell performance limiting factor. Herein, LSM-YSZ:PrO x composite is developed as an active electrocatalyst for both oxygen reduction and evolution reactions. A single step PrO x infiltration into LSM-YSZ lowers the polarization resistance (Rp) 10–20 times depending on the test temperature. Distribution of relaxation times (DRT) calculation reveals that adding PrO x affects surface exchange between adsorbed/desorbed oxygen and lattice oxygen, and oxygen dissociative adsorption/desorption. A symmetrical cell with a thin YSZ electrolyte sandwiched between thick LSM-YSZ:PrO x electrode-supports is developed and its oxygen generation performance and stability are evaluated under various current densities and temperatures. Finally, reversible solid oxide cell (ReSOC) performance is also reported for LSM-YSZ:PrO x supported cells with the oxide fuel electrode Sr 0.95 (Ti 0.3 Fe 0.63 Ni 0.07 )O 3-δ (STFN).
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Operating Stresses and Their Effects on Degradation of LSM-Based SOFC Cathodes
The performance of solid oxides fuel cells (SOFCs) with four different Mn excess of lanthanum strontium manganite (LSM) -based cathodes were examined under different temperatures (1,000 °C, 900 °C), current densities (0, 380, and 760 mA cm -2 ), and cathode atmospheres (p O 2 )=0.1,0.15,0.21) for durations ranging from 58 to 1,008 h. Each yttria-stabilized zirconia (YSZ) electrolyte-supported “button” cell had a porous Ni/YSZ composite anode and a porous LSM/YSZ composite cathode. The cells’ output voltage versus time were recorded and electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) measurements were performed every 24 hours. The total area specific resistance (ASR) was calculated from these measurements. The values of ASR from both EIS and LSV were comparable between each other but lower than that from durability test. Distribution of relaxation times (DRT) analysis was performed to investigate the electrochemical processes and their corresponding relaxation frequencies as well as their attributions to the total ASR. The series resistance and parallel resistance that obtained from the equivalent circuit fit of the Nyquist plot were higher at low temperature and low p O 2 regardless of LSM compositions. The area of the peaks derived from DRT analysis increased with time during individual tests. The microstructures of the tested cells were examined using scanning electron microscopy and energy-dispersive x-ray spectroscopy (SEM/EDS). Manganese oxide particles were observed near the cathode-electrolyte interface after prolonged (1,008 h) testing in air of a cell with LSM of 11% manganese excess, and after a short test (58 h) under low oxygen (p O 2 = 0.10) in a cell with LSM of 5% manganese excess. However, the role of MnOx in cell degradation is still unknown.
08 HYDROGEN↗
Mitigating Crack Formation When Using High Oxygen Permeability Ionomer in PEMFC Catalyst Layers
High oxygen permeability ionomers (HOPIs) are being developed as an alternative to conventional perfluorosulfonic (PFSA) ionomers for cathodes in proton exchange membrane fuel cells (PEMFCs). HOPIs aim to reduce local oxygen transport resistance, improving performance and reducing degradation as the catalyst loses surface area. However, HOPIs' more rigid, 3D backbone leads to increased crack density in the cathode, potentially causing accelerated degradation. This study investigates crack formation in HOPI-based and PFSA-bound catalyst layers (CLs). We conducted a comprehensive parametric study to identify conditions and catalyst slurry components that minimize cracking. CLs were fabricated with various ionomer and catalyst types, under different relative humidity (RH) levels, solids weight percentages, solvent ratios, and ionomer-to-carbon ratios (I/C). Results show that HOPI-based CLs exhibit less cracking when fabricated under low RH conditions, with lower solids weight percentage, higher alcohol content, and lower I/C. Additionally, catalysts with low/medium surface area carbon supports show less cracking than those with high surface area carbon supports.
08 HYDROGEN↗
Electrode Design for Low Temperature Direct-Hydrocarbon Solid Oxide Fuel Cells
In certain embodiments of the present disclosure, a solid oxide fuel cell is described. The solid oxide fuel cell includes a hierarchically porous cathode support having an impregnated cobaltite cathode deposited thereon, an electrolyte, and an anode support. The anode support includes hydrocarbon oxidation catalyst deposited thereon, wherein the cathode support, electrolyte, and anode support are joined together and wherein the solid oxide fuel cell operates a temperature of 600.degree. C. or less.
Chen, Fanglin↗
Surface enhanced performance of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ cathodes by infiltration Pr-Ni-Mn-O progress
Herein the present study reports the enhancement of electrochemical oxygen reduction activity of porous La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ (LSCF) cathodes by coating a thin film of Pr-Ni-Mn oxide (PNM5) using a multi-step infiltration process. XRD examination reveals that PNM5 mainly contains a multiphase mixture of Pr 6 O 11 , PrNiO 3 , MnO and NiO. SEM morphology shows a thin PNM5 film and small particles are formed on the surface of LSCF backbone particles. Impedance spectrum analysis indicates that PNM5 infiltrated LSCF exhibits dramatically reduced polarization resistance (R p ), reaching R p of 0.244 Ω cm 2 at 973 K, which is one-half of the baseline LSCF cathode. The activation energy of LSCF cathodes infiltrated with PNM5 is 1.45 eV, slightly lower than the baseline LSCF cathode (1.77 eV). Distribution of relaxation time (DRT) function analysis shows PNM5 infiltration layer significantly promotes the oxygen reduction reaction (ORR) of cathode surface. With the increase in firing temperature, the total resistance increases and R p changes from ion transport to oxygen reduction reaction. Degradation rate of the PNM5-infiltrated LSCF is also lower, 0.02168% vs 0.07093% for the baseline LSCF over a 200-h period. A single cell testing indicated that the peak power density of the PNM5-infiltrated cell was increased by 140.66%. Overall, PNM5 could be a potential catalyst for boosting the performance of a commercial LSCF cathode for solid oxide fuel cells (SOFC).
36 MATERIALS SCIENCE↗
Organometallic catalysts for primary phosphoric acid fuel cells
A continuing effort by the U.S. Department of Energy to improve the competitiveness of the phosphoric acid fuel cell by improving cell performance and/or reducing cell cost is discussed. Cathode improvement, both in performance and cost, available through the use of a class of organometallic cathode catalysts, the tetraazaannulenes (TAAs), was investigated. A new mixed catalyst was identified which provides improved cathode performance without the need for the use of a noble metal. This mixed catalyst was tested under load for 1000 hr. in full cell at 160 to 200 C in phosphoric acid H3PO4, and was shown to provide stable performance. The mixed catalyst contains an organometallic to catalyze electroreduction of oxygen to hydrogen peroxide and a metal to catalyze further electroreduction of the hydrogen peroxide to water. Cathodes containing an exemplar mixed catalyst (e.g., Co bisphenyl TAA/Mn) operate at approximately 650 mV vs DHE in 160 C, 85% H3PO4 with oxygen as reactant. In developing this mixed catalyst, a broad spectrum of TAAs were prepared, tested in half-cell and in a rotating ring-disk electrode system. TAAs found to facilitate the production of hydrogen peroxide in electroreduction were shown to be preferred TAAs for use in the mixed catalyst. Manganese (Mn) was identified as a preferred metal because it is capable of catalyzing hydrogen peroxide electroreduction, is lower in cost and is of less strategic importance than platinum, the cathode catalyst normally used in the fuel cell.
Walsh, Fraser↗
Strong, Tough Glass Composites Developed for Solid Oxide Fuel Cell Seals
A fuel cell is an electrochemical device that continuously converts the chemical energy of a fuel directly into electrical energy. It consists of an electrolyte, an anode, and a cathode. Various types of fuel cells are available, such as direct methanol fuel cells, alkaline fuel cells, proton-exchange-membrane fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, and solid oxide fuel cells (SOFCs). The salient features of an SOFC are all solid construction and high-temperature electrochemical-reaction-based operation, resulting in clean, efficient power generation from a variety of fuels. SOFCs are being developed for a broad range of applications, such as portable electronic devices, automobiles, power generation, and aeronautics.
Bansal, Narottam P.↗