Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Finite element analyses of plane thermal entry-length flows

It is pointed out that the design of actively cooled engine and airframe structures for hypersonic flight requires strong interaction between fluid, thermal, and structural analyses. Research programs are being conducted to develop an integrated thermal-structural analysis capability based upon the finite element method. In connection with these programs, a finite element engineering approach has been developed based upon a number of assumptions customarily used in practical heat transfer analysis. An evaluation is conducted of the finite element engineering approach for entry-length flows. The evaluation makes use of an analysis of plane thermal entry-length flows by a finite element approach utilizing mean fluid temperatures with a convection coefficient. Another analysis is based on a finite element continuum approach, taking into account the rigorous momentum, mass, and energy equations of viscous, incompressible flow. The engineering approach was found to give excellent agreement with the rigorous continuum approach for Peclet number values not less than 100.

Thornton, E. A.↗
NASA NTRS1986

SSME fuelside preburner two-dimensional analysis

The flow field within the fuelside preburner of the Space Shuttle Main Engine is calculated using a reacting flow code (REACT2D). Inlet and modeling parameters involved in the numerical calculation are systematically varied to establish the sensitivity of the calculated exit temperature profile. It is found that differences in the inlet equivalence ratio have a large effect on the turbine inlet temperature profile. A variety of preburner inlet modeling changes such as inlet turbulence level, modeling the gases as burned, unburned, premixed, or unmixed, are shown to have a smaller effect on the calculated turbine inlet temperature profile. Also, the form of finite differencing used is shown to have an effect on the temperature profile.

Vanoverbeke, T. J.↗
NASA NTRS1982

Improved finite element methodology for integrated thermal structural analysis

An integrated thermal-structural finite element approach for efficient coupling of thermal and structural analysis is presented. New thermal finite elements which yield exact nodal and element temperatures for one dimensional linear steady state heat transfer problems are developed. A nodeless variable formulation is used to establish improved thermal finite elements for one dimensional nonlinear transient and two dimensional linear transient heat transfer problems. The thermal finite elements provide detailed temperature distributions without using additional element nodes and permit a common discretization with lower order congruent structural finite elements. The accuracy of the integrated approach is evaluated by comparisons with analytical solutions and conventional finite element thermal structural analyses for a number of academic and more realistic problems. Results indicate that the approach provides a significant improvement in the accuracy and efficiency of thermal stress analysis for structures with complex temperature distributions.

Dechaumphai, P.↗
NASA NTRS1982

Improved finite element methodology for integrated thermal structural analysis

An integrated thermal-structural finite element approach for efficient coupling of thermal and structural analyses is presented. New thermal finite elements which yield exact nodal and element temperature for one dimensional linear steady state heat transfer problems are developed. A nodeless variable formulation is used to establish improved thermal finite elements for one dimensional nonlinear transient and two dimensional linear transient heat transfer problems. The thermal finite elements provide detailed temperature distributions without using additional element nodes and permit a common discretization with lower order congruent structural finite elements. The accuracy of the integrated approach is evaluated by comparisons with analytical solutions and conventional finite element thermal-structural analyses for a number of academic and more realistic problems. Results indicate that the approach provides a significant improvement in the accuracy and efficiency of thermal stress analysis for structures with complex temperature distributions.

Dechaumphai, P.↗
NASA NTRS1975

Rigid format alter packets for the analysis of electromagnetic field problems

The computer program NASTRAN is used to solve electromagnetic field problems. The diffusion equation and the boundary conditions valid for problems of these kinds together with a replacing potential energy function are given. The extent to which an analogy with finite element displacement and temperature approaches holds is indicated. The outputting of complex quantities is made possible after adjustment of standard rigid format 1 input data blocks to module SDR2. The applications made involve the study of the proximity effect in a system of three parallel conductors and the analysis of the magnetic field in the vicinity of the points of contact in circuit breakers.

Spreeuw, E.↗
NASA NTRS1982

Time-dependent solutions of multimode convection equations

Truncated modal equations are used to study the time evolution of thermal convection. In the Boussinesq approximation these nonlinear equations are obtained by expanding the fluctuating velocity and temperature fields in a finite set of planforms of the horizontal coordinates. Numerical studies dealing with two or three modes with triad interactions are discussed. Rich time dependence was found in these cases: periodic and aperiodic solutions can be obtained, along with various steady solutions. Three-mode solutions reproduce the qualitative appearance of spoke-pattern convection as observed in experiments at high Prandtl numbers. Though the values of the periods of the time-dependent solutions do not agree with those of the experiments, their variation with Rayleigh number compares favorably. Except at the highest Rayleigh number considered (10,000,000), the theoretical Nusselt numbers agree well with experiment.

Toomre, J.↗
NASA NTRS1985

On convergence of computation of chemically reacting flows

The computational problems associated with high-temperature flows undergoing finite-rate ionization reactions is investigated. The conservation equations governing chemical species and vibrational and electron energies are solved simultaneously with those for overall mass, momentum, and energy for a one-dimensional subsonic flow, through a constant-area duct, originating behind a normal shock wave, using an implicit time-marching technique. Boundary conditions are imposed in the form of characteristic wave variables accounting for the effects of chemical reactions on the speed of sound. Converging solutions are obtained for cases in which chemical reactions are weak, but difficulty is encountered in other cases. The cause of the difficulty is investigated and shown to be the sharp pressure disturbances produced by such reactions.

Park, C.↗
NASA NTRS1987

Mean-field theory of spin-glasses with finite coordination number

The mean-field theory of dilute spin-glasses is studied in the limit where the average coordination number is finite. The zero-temperature phase diagram is calculated and the relationship between the spin-glass phase and the percolation transition is discussed. The present formalism is applicable also to graph optimization problems.

Kanter, I.↗
NASA NTRS1989

The use of holographic interferometry for measurements of temperature in a rectangular heat pipe

Holographic interferometry is a nonintrusive method and as such possesses considerable advantages such as not disturbing the velocity and temperature field by creating obstacles which would alter the flow field. These optical methods have disadvantages as well. Holography, as one of the interferometry methods, retains the accuracy of older methods, and at the same time eliminates the system error of participating components. The holographic interferometry consists of comparing the objective beam with the reference beam and observing the difference in lengths of optical paths, which can be observed during the propagation of the light through a medium with locally varying refractive index. Thus, change in refractive index can be observed as a family of nonintersecting surfaces in space (wave fronts). The object of the investigation was a rectangular heat pipe. The goal was to measure temperatures in the heat pipe, which yields data for computer code or model assessment. The results were obtained by calculating the temperatures by means of finite fringes.

Marn, Jure↗
NASA NTRS1991

Systems integration and demonstration of advanced reusable structure for ALS

The objective was to investigate the potential of advanced material to achieve life cycle cost (LCC) benefits for reusable structure on the advanced launch system. Three structural elements were investigated - all components of an Advanced Launch System reusable propulsion/avionics module. Leading aeroshell configurations included sandwich structure using titanium, graphite/polyimide (Gr/PI), or high-temperature aluminum (HTA) face sheets. Thrust structure truss concepts used titanium, graphite/epoxy, or silicon carbide/aluminum struts. Leading aft bulkhead concepts employed graphite epoxy and aluminum. The technical effort focused on the aeroshell because the greatest benefits were expected there. Thermal analyses show the structural temperature profiles during operation. Finite element analyses show stresses during splash-down. Weight statements and manufacturing cost estimates were prepared for calculation of LCC for each design. The Gr/PI aeroshell showed the lowest potential LCC, but the HTA aeroshell was judged to be lower risk. A technology development plan was prepared to validate the applicable structural technology.

Gibbins, Martin N.↗
NASA NTRS1994

Comparison of Coupled Radiative Navier-Stokes Flow Solutions with the Project Fire II Flight Data

A nonequilibrium, axisymmetric, Navier-Stokes flow solver with coupled radiation has been developed to use in the design of thermal protection systems for vehicles where radiation effects are important. The present method has been compared with an existing flow and radiation solver and with the Project Fire II experimental data. Very good agreement has been obtained over the entire Fire II trajectory with the experimentally determined values of the stagnation radiation intensity in the .2 to 6.2 eV range and with the total stagnation heating. The agreement was significantly better than previous numerical predictions. The effects of a number of flow models are examined to determine which combination of physical models produces the best agreement with the experimental data. These models include radiation coupling, multi-temperature thermal models, finite-rate chemistry, and a quasi-steady-state or Boltzmann assumption for the calculation of the excited electronic states. Finally, the computational efficiency of the present model is evaluated. The radiation properties model developed for this study is shown to offer significant computational savings compared to existing codes.

Olynick, David R.↗
NASA NTRS2000

Composite Flywheels Assessed Analytically by NDE and FEA

As an alternative to expensive and short-lived lead-acid batteries, composite flywheels are being developed to provide an uninterruptible power supply for advanced aerospace and industrial applications. Flywheels can help prevent irregularities in voltage caused by power spikes, sags, surges, burnout, and blackouts. Other applications include load-leveling systems for wind and solar power facilities, where energy output fluctuates with weather. Advanced composite materials are being considered for these components because they are significantly lighter than typical metallic alloys and have high specific strength and stiffness. However, much more research is needed before these materials can be fully utilized, because there is insufficient data concerning their fatigue characteristics and nonlinear behavior, especially at elevated temperatures. Moreover, these advanced types of structural composites pose greater challenges for nondestructive evaluation (NDE) techniques than are encountered with typical monolithic engineering metals. This is particularly true for ceramic polymer and metal matrix composites, where structural properties are tailored during the processing stages. Current efforts involving the NDE group at the NASA Glenn Research Center at Lewis Field are focused on evaluating many important structural components, including the flywheel system. Glenn's in-house analytical and experimental capabilities are being applied to analyze data produced by computed tomography (CT) scans to help assess the damage and defects of high-temperature structural composite materials. Finite element analysis (FEA) has been used extensively to model the effects of static and dynamic loading on aerospace propulsion components. This technique allows the use of complicated loading schemes by breaking the complex part geometry into many smaller, geometrically simple elements.

Abdul-Aziz, Ali↗
NASA NTRS2016

Unexpected Nonlinear Effects in Superconducting Transition-Edge Sensors

When a normal metal transitions into the superconducting state the DC resistance drops from a finite value to zero over some finite transition width in temperature, current, and magnetic field. Superconducting transition-edge sensors (TESs) operate within this transition region and uses resistive changes to measure deposited thermal energy. This resistive transition is not perfectly smooth and a wide range of TES designs and materials show sub-structure in the resistive transition (as seen in smooth nonmonotonic behavior, jump discontinuities, and hysteresis in the devices current-voltage relation and derivatives of the resistance with respect to temperature, bias current, and magnetic field). TES technology has advanced to the point where for many applications this structure is the limiting factor in performance and optimization consists of finding operating points away from these structures. For example, operating at or near this structure can lead to nonlinearity in the detectors response and gain scale, limit the spectral range of the detector by limiting the usable resistive range, and degrade energy resolution. The origin of much of this substructure is unknown. This presentation investigates a number of possible sources in turn. First we model the TES as a superconducting weak-link and solve for the characteristic differential equations current and voltage time dependence. We find:(1) measured DC biased current-voltage relationship is the time-average of a much higher frequency limit cycle solution.(2) We calculate the fundamental frequency and estimate the power radiated from the TES treating the bias leads as an antennae.(3) The solution for a set of circuit parameters becomes multivalued leading to current transitions between levels.(4)The circuit parameters can change the measure resistance and mask the true critical current. As a consequence the TES resistance surface is not just a function of temperature, current, and magnetic field but is also a function of the circuit elements (such as shunt resistor, SQUID inductance, and capacitor values). In other words, same device measured in different electrical circuits will have a different resistive surface in temperature, current, and magnetic field. Next we consider that at the transition temperature of a superconductor both the magnetic penetration depth and coherence length are divergent. As a consequence these important characteristic length scales are changing with operating point. We present measurements on devices showing commensurate behavior between these characteristic lengths and the length scale of added normal metal structures. Reordering of proximity vortices leads to discontinuities and irreversibility of the current-voltage curves. Last we consider a weak-link TES including both thermal activated resistance effects and the effect of the magnetic penetration depth being a function of temperature and magnetic field. We derive its impact on the resistive transition surface and the important device parameters a and b.

Superconducting Detectors↗
NASA NTRS1991

Computing Temperatures In Optically Pumped Laser Rods

Computer program presents new model solving temperature-distribution problem for laser rods of finite length and calculates both radial and axial components of temperature distributions in these rods. Contains several self-checking schemes to prevent over-writing of memory blocks and to provide simple tracing of information in case of trouble. Written in Microsoft FORTRAN 77.

Farrukh, Usamah O.↗
NASA NTRS1979

Evaluation of finite element formulations for transient conduction forced-convection analysis

Conventional versus upwind convective finite elements, and lumped versus consistent formulations for practical conduction/forced convection analysis are evaluated on the basis of numerical studies, with finite element and finite difference lumped-parameter temperatures compared to closed-form analytical solutions for convection problems. Attention is given to two practical combined conduction and forced convection applications, stressing that the finite element method, showing superior accuracy, is competitive with the finite difference lumped-parameter method. Also considered are the computational time savings offered by the zero capacitance nodes procedure and comparative finite element and finite difference lumped-parameter computer times. The present study has reference to the design of actively cooled engine and airframe structures for hypersonic flight.

Thornton, E. A.↗
NASA NTRS1988

Structural assessment of a space station solar dynamic heat receiver thermal energy storage canister

The structural performance of a space station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start up operating conditions was assessed. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes 188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically determined temperature was compared with that based on the experimentally measured temperature data.

Thompson, R. L.↗