Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “field experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Comparative analysis of the methods for quantitative determination of water content in skin from diffuse reflectance spectroscopy data

The predictive properties of methods aimed for estimating the water content in skin from the spectral diffuse reflection characteristics near the water absorption line in the near-IR spectral range are analysed. Numerical simulation data, experimental data on diffuse reflection from human skin phantoms, and data from the reference data set of human skin reflectance spectra are used to consider the possibility of gaining additional information about the water distribution in skin. The influence of variations in the scattering coefficient and oxyhaemoglobin concentration on the water content estimates is investigated. (paper)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Trapped flux in pure and Mn-substituted CaKFe 4 As 4 and MgB 2 superconducting single crystals

Abstract Measurements of temperature dependent magnetization associated with trapped magnetic flux in single crystals of CaKFe 4 As 4 , CaK(Fe 0.983 Mn 0.017 ) 4 As 4 and MgB 2 using zero-field-cooled and field-cooled protocols are presented. The results allow for the determination of the values of superconducting transition temperature, lower critical field and self-field critical current density. These are compared with the literature data. Possible experimental concerns are briefly outlined. Our results, on these known superconductors at ambient pressure, are qualitatively similar to those recently measured on superhydrides at megabar pressures (Minkov et al 2023 Nat. Phys. https://doi.org/10.1038/s41567-023-02089-1 ) and, as such, hopefully serve as a baseline for the interpretation of high pressure, trapped flux measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

High-Fidelity Simulations of Gravity Currents Using a High-Order Finite-Difference Spectral Vanishing Viscosity Approach

This numerical work investigates the potential of a high-order finite-difference spectral vanishing viscosity approach to simulate gravity currents at high Reynolds numbers. The method introduces targeted numerical dissipation at small scales through altering the discretisation of the second derivatives of the viscous terms in the incompressible Navier-Stokes equations to mimic the spectral vanishing viscosity (SVV) operator, originally designed for the regularisation of spectral element method (SEM) solutions of pure advection problems. Using a sixth-order accurate finite-difference scheme, the adoption of the SVV method is straightforward and comes with a negligible additional computational cost. In order to assess the ability of this high-order finite-difference spectral vanishing viscosity approach, we performed large-eddy simulations (LES) of a gravity current in a channelised lock-exchange set-up with our SVV model and with the well-known explicit static and dynamic Smagorinsky sub-grid scale (SGS) models. The obtained data are compared with a direct numerical simulation (DNS) based on more than 800 million mesh nodes, and with experimental measurements. A framework for the energy budget is introduced to investigate the behaviour of the gravity current. First, it is found that the DNS is in good agreement with the experimental data for the evolution of the front location and velocity field as well as for the stirring and mixing inside the gravity current. Secondly, the LES performed with less than 0.4% of the total number of mesh nodes compared to the DNS, can reproduce the main features of the gravity currents, with the SVV model yielding slightly more accurate results. It is also found that the dynamic Smagorinsky model performs better than its static version. For the present study, the static and dynamic Smagorinsky models are 1.8 and 2.5 times more expensive than the SVV model, because the latter does not require the calculation of explicit SGS terms in the Navier-Stokes equations nor spatial filtering operations.

direct numerical simulation↗
DOE OSTI2025

Distortions in charged-particle images of laser direct-drive inertial confinement fusion implosions

Energetic charged particles generated by inertial confinement fusion (ICF) implosions encode information about the spatial morphology of the hotspot and dense fuel during the time of peak fusion reactions. The knock-on deuteron imager (KoDI) was developed at the Omega Laser Facility to image these particles in order to diagnose low-mode asymmetries in the hotspot and dense fuel layer of cryogenic deuterium–tritium ICF implosions. However, the images collected are distorted in several ways that prevent reconstruction of the deuteron source. In this paper, we describe these distortions and a series of attempts to mitigate or compensate for them. We present several potential mechanisms for the distortions, including a new model for scattering of charged particles in filamentary electric or magnetic fields surrounding the implosion. Particle-tracing is used to create synthetic KoDI data based on the filamentary field model that reproduces the main experimentally observed image distortions. We conclude that the filamentary scattering model best matches the observed image distortions. Finally, we discuss potential impacts of filamentary fields on other charged-particle diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Continuous pressure-induced valence and magnetic transitions in EuMnSb 2

EuMnSb 2 is a unique and promising compound with complex magnetism (Eu and Mn sublattices) to realize magnetic control of topological quasiparticles. By applying pressure (P) to this system, we have observed a continuous pressure-induced valence change from Eu 2+ to Eu 3+ . Remarkably, despite the significant valence change in Eu ions, an extremely large increase in the magnetic ordering temperature (T N,Eu ) from 21 K at ambient pressure to 180 K at 28.4 GPa is detected.The substantial enhancement in T N,Eu is likely the consequence of the reduced distance between neighboring Eu ions and the enhanced indirect exchange interaction through increased 4f -5d mixing under pressure. Furthermore, T N,Eu (P) shows a discontinuous change above 8 GPa, although the orthorhombic crystal structure remains stable. Our experimental data indicate the record high value in the magnetic hyperfine field of 151 Eu, reaching 74.1 T at 28.4 GPa and 26 K. In conclusion, these unusual electronic and magnetic transitions revealed by pressure highlight that EuMnSb 2 is a rich magnetic topological semimetal candidate for investigating a multitude of strong correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Simulating spin dynamics of supersolid states in a quantum Ising magnet

Motivated by a recent experimental study on the quantum Ising magnet K 2 Co(SeO 3 ) 2 that presented spectroscopic evidence of zero-field supersolidity (Chen et al., arXiv:2402.15869), we simulate the excitation spectrum of the corresponding microscopic XXZ model for the compound, using the recently developed excitation ansatz for infinite projected entangled-pair states. Here, we map out the ground state phase diagram and compute the dynamical spin structure factors across a range of magnetic field strengths, focusing especially on the two supersolid phases found near zero and saturation fields. Our simulated excitation spectra for the zero-field supersolid “Y” phase are in excellent agreement with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Decovalex-2019 (Executive Summary)

The DECOVALEX Project is an on-going international research collaboration, established in 1992, to advance the understanding and modeling of coupled Thermal (T), Hydrological (H), Mechanical (M) and Chemical (C) processes in geological in geological systems. DECOVALEX was initially motivated by the recognition that prediction of these coupled effects is an essential part of the performance and safety assessment of geologic disposal systems for radioactive waste and spent nuclear fuel. Later it was realized that these processes also play a critical role in other subsurface engineering activities, such as subsurface CO 2 storage, enhanced geothermal systems, and unconventional oil and gas production through hydraulic fracturing. Research teams from many countries (e.g., Canada, China, Czech Republic, Finland, France, Germany, Japan, Republic of Korea, Spain, Sweden, Switzerland, Taiwan, United Kingdom, and the United States) various institutions have participated in the DECOVALEX Project over the years, providing a wide range of perspectives and solutions to these complex problems. These institutions represent radioactive waste management organizations, national research institutes, regulatory agencies, universities, as well as industry and consulting groups. The overall aim of DECOVALEX-2019 was to increase the understanding of various thermo-hydro-mechanical-chemical processes of importance for radionuclide release and transport from a repository to the biosphere and how they can be described and modelled using mathematical models. The scientific and technical objectives are: to increase the basic understanding of T-H-M-C coupled processes in fractured rocks (crystalline, sedimentary, argillaceous) and buffer materials; to investigate the predictive capabilities of different codes to field experiments and to perform verification of codes; to exchange experimental data, and improve the understanding of the constitutive behavior of crystalline and argillaceous rock masses and buffer materials; and to perform THMC calculations in a performance/safety assessment context.

58 GEOSCIENCES↗
DOE OSTI2024

Understanding the L-H isotope effect at the DIII-D tokamak and advancements in synthetic turbulence diagnostics

Abstract It is determined that while heat flux differences between hydrogen and deuterium isotope experiments result from natural differences in carbon impurity content at DIII-D, it is not the origin of the low to high confinement mode (L-H) transition isotope effect. More specifically, a two times larger edge radial electric field in hydrogen compared to deuterium is uncovered and believed to play an important role. The origin of this radial electric field difference is determined to have two possible origins: differences in poloidal rotation and turbulent Reynolds stress in the closed field line region, and increased outer strike point temperatures and space potentials on open field lines. Experimental observations from both profile and turbulence diagnostics are supported by nonlinear gyrokinetic simulations using the code CGYRO. Simulations illustrated heat transport isotope effects in the plasma edge and shear layer resulting from differences in impurity content, electron non-adiabaticity, and main ion mass dependent E × B shear stabilization. Turbulence prediction comparisons from flux-matched CGYRO simulations to experimental measurements including electron temperature, density and velocity fluctuations are found to be in good agreement with available data. A dedicated DIII-D experiment in hydrogen was performed to seed more carbon than naturally occurring, to match deuterium experiments, and possibly reduce the L-H power threshold based on gyro-kinetic predictions. To our surprise, while ion temperature gradient (ITG) turbulence was stabilized, nodiscernible change in L-H power threshold were observed in these special hydrogen experiments. In particular, it is noticed that the edge radial electric field and Reynolds stress were observed as nearly unchanging in the presence of ITG stabilization. These experimental data have enabled a more comprehensive picture of the multitude of isotope effects at play in fusion experiments, and the important potential connection between the confined and unconfined plasma regions in regulating L-H transition dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Demonstration of RELAP5-3D for transient analysis of a dual coolant lead lithium fusion blanket concept

Our research aims to build a multiphysics framework for transient analysis of the Dual- Coolant Lead-Lithium (DCLL) blanket design of the proposed Fusion Nuclear Science Facility (FNSF) for all Onticipated Operational Occurrences (AOOs) using Reduced Order Models (ROMs). This paper presents an assessment of using RELAP5-3D for transient thermal-hydraulic blanket analysis of the DCLL design. Preliminary validation studies for the RELAP5-3D properties were conducted using a representative vertical flow loop model and a comparison study using experimental data from the thermal convection corrosion loops at ORNL. These studies inspected the thermal hydraulic response of Lead-Lithium Eutectic (PbLi) systems within the RELAP5-3D code; mainly pressure drop and heat transfer, as compared to analytical calculations and experimental data. The Magnetohydrodynamic (MHD) pressure drop effect for liquid metal under the effects of a uniform magnetic field was implemented into our models using an equivalent forms loss coefficient based on the phasic momentum equations. We verified our implementation of MHD pressure drop within RELAP5-3D using a systematic approach consisting of two studies. Models were developed to perform comparison studies based on experimental data from the Argonne Liquid metal EXperiment (ALEX) facility and the Magnetohydrodynamic PbLi Experiment (MaPLE) facility. Using the developed validation basis, we built a simplified DCLL channel model within RELAP5-3D, inspected MHD pressure drop and performed transient temperature analysis. The DCLL channel model used radial heating data from the International Thermonuclear Experimental Reactor (ITER) which was normalized to the FNSF design. Here, a representative startup transient was performed using a relative power curve from the initial ramp up of a long-term power pulse of the Tore Supra reactor. This study demonstrated that RELAP5-3D ROMs are capable of accurate transient analysis of the DCLL blanket. We have since utilized MCNP to develop heating profiles based on the FNSF design and are working toward implementing them into our DCLL model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Recent progress on in-medium properties of heavy mesons from finite-temperature EFTs

Mesons with heavy flavor content are an exceptional probe of the hot QCD medium produced in heavy-ion collisions. In the past few years, significant progress has been made toward describing the modification of the properties of heavy mesons in the hadronic phase at finite temperature. Ground-state and excited-state thermal spectral properties can be computed within a self-consistent many-body approach that employs appropriate hadron-hadron effective interactions, providing a unique opportunity to confront hadronic Effective Field Theory predictions with recent and forthcoming lattice QCD simulations and experimental data. In this article, we revisit the application of the imaginary-time formalism to extend the calculation of unitarized scattering amplitudes from the vacuum to finite temperature. These methods allow us to obtain the ground-state thermal spectral functions. The thermal properties of the excited states that are dynamically generated within the molecular picture are also directly accessible. We present here the results of this approach for the open-charm and open-bottom sectors. We also analyze how the heavy-flavor transport properties, which are strongly correlated to experimental observables in heavy-ion collisions, are modified in hot matter. In particular, transport coefficients can be computed using an off-shell kinetic theory that is fully consistent with the effective theory describing the scattering processes. The results of this procedure for both charm and bottom transport coefficients are briefly discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Investigating the coalescence-inspired sum rule for light nuclei and hypernuclei in heavy-ion collisions

A data-driven idea is presented to test if light nuclei and hypernuclei obey the coalescence-inspired sum rule, i.e., to test if the flow of a light nucleus or hypernucleus is the summed flow of each of its constituents. Here, the mass difference and charge difference among the constituents of light nuclei and hypernuclei are treated appropriately. The idea is applied to the available data for $\sqrt{^sNN}$ = 3 GeV fixed-target Au + Au collisions at the Relativistic Heavy Ion Collider (RHIC), published by the STAR Collaboration. It is found that the sum rule for light nuclei is approximately valid near midrapidity (-0.3 < $\mathcal{y}$ < 0), but there is a clear violation of the sum rule at large rapidity ($\mathcal{y}$ < -0.3). Further, the Jet AA Microscopic Transport Model (JAM), with baryonic mean-field plus nucleon coalescence, generates a similar pattern as obtained from the experimental data. In the present approach, the rapidity dependence of directed flow of the hypernuclei $^3_Λ$⁢H and $^4_Λ$H is predicted in a model-independent way for $\sqrt{^sNN}$ = 3 GeV Au + Au collisions, which will be explored by ongoing and future measurements from STAR.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Improved chemistry restraints for crystallographic refinement by integrating the Amber force field into Phenix

The refinement of biomolecular crystallographic models relies on geometric restraints to help to address the paucity of experimental data typical in these experiments. Limitations in these restraints can degrade the quality of the resulting atomic models. Here, an integration of the full all-atom Amber molecular-dynamics force field into Phenix crystallographic refinement is presented, which enables more complete modeling of biomolecular chemistry. The advantages of the force field include a carefully derived set of torsion-angle potentials, an extensive and flexible set of atom types, Lennard–Jones treatment of nonbonded interactions and a full treatment of crystalline electrostatics. The new combined method was tested against conventional geometry restraints for over 22 000 protein structures. Structures refined with the new method show substantially improved model quality. On average, Ramachandran and rotamer scores are somewhat better, clashscores and MolProbity scores are significantly improved, and the modeling of electrostatics leads to structures that exhibit more, and more correct, hydrogen bonds than those refined using traditional geometry restraints. In general it is found that model improvements are greatest at lower resolutions, prompting plans to add the Amber target function to real-space refinement for use in electron cryo-microscopy. This work opens the door to the future development of more advanced applications such as Amber -based ensemble refinement, quantum-mechanical representation of active sites and improved geometric restraints for simulated annealing.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Large-Eddy Simulation of Flow Over Boeing Gaussian Bump Using Multiagent Reinforcement Learning Wall Model: Preprint

We develop a wall model for large-eddy simulation (LES) that takes into account various pressure-gradient effects using multi-agent reinforcement learning. The model is trained using low-Reynolds-number flow over periodic hills with agents distributed on the wall at various computational grid points. It utilizes a wall eddy-viscosity formulation as the boundary condition to apply the modeled wall shear stress. Each agent receives states based on local instantaneous flow quantities at an off-wall location, computes a reward based on the estimated wall-shear stress, and provides an action to update the wall eddy viscosity at each time step. The trained wall model is validated in wall-modeled LES of flow over periodic hills at higher Reynolds numbers, and the results show the effectiveness of the model on flow with pressure gradients. The analysis of the trained model indicates that the model is capable of distinguishing between the various pressure gradient regimes present in the flow. To further assess the robustness of the developed wall model, simulations of flow over the Boeing Gaussian bump are conducted at a Reynolds number of 2 x 10^6, based on the free-stream velocity and the bump width. The results of mean skin friction and pressure on the bump surface, as well as the velocity statistics of the flow field, are compared to those obtained from equilibrium wall model (EQWM) simulations and published experimental data sets. The developed wall model is found to successfully capture the acceleration and deceleration of the turbulent boundary layer on the bump surface, providing better predictions of skin friction near the bump peak and exhibiting comparable performance to the EQWM with respect to the wall pressure and velocity field. We also conclude that the subgrid-scale model is crucial to the accurate prediction of the flow field, in particular the prediction of separation.

boundary layer↗
DOE OSTI2024

Proton deflectometry analysis in magnetized plasmas: Magnetic field reconstruction in one dimension

Proton deflectometry is used in magnetized high-energy-density plasmas to observe electromagnetic fields. Here we describe a reconstruction algorithm to recover the electromagnetic fields from proton fluence data in 1-D. The algorithm is verified against analytic solutions and applied to example data. Next, we study the role of source fluence uncertainty for 1-D reconstructions. We show that reconstruction boundary conditions can be used to constrain the source fluence profile and use this to develop a reconstruction using a specified pair of boundary conditions on the magnetic field. From these considerations, we experimentally demonstrate a hybrid mesh-fluence reconstruction technique where fields are reconstructed from fluence data in an interior region with boundary conditions supplied by direct mesh measurements at the boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Collapse of the effective response time near the spin glass transition temperature

Kenning et al. discovered the collapse of the effective response time, 𝑡$^{eff}_{𝐻}$⁡(𝑡 w ;𝑇), independent of aging time, 𝑡 w , as one approached the spin glass transition temperature 𝑇 g from below. Nordblad and Lundgren observed the same effect by reducing the temperature from 𝑇 g ⁡(𝐻). We analyze the behavior of ln⁡ 𝑡$^{eff}_{𝐻}$⁡(𝑡 w ;𝑇) in the temperature range near and below 𝑇 g using a scaling law that takes into account both the magnetic field 𝐻 and the time-dependent spin-glass coherence length 𝜉⁡(𝑡,𝑡 w ;𝑇). As a result, an overdetermined predictive fit to the experimental data accounts for a quasioscillatory structure of ln ⁡𝑡$^{eff}_{𝐻}$⁡ (𝑡 w ;𝑇) as a function of magnetic field 𝐻 2 for reduced temperatures as large as 𝑇/𝑇 g = 0.98.

Frustrated magnetism↗
DOE OSTI2024

A mean field homogenization model for the mechanical response of ceramic matrix composites

SiC/SiC composites offer exceptional mechanical stability at high temperatures and under irradiation. These ceramic matrix composites are therefore strong candidate materials for future nuclear energy applications. Their mechanical response, which exhibits pseudo-plasticity, is mediated by matrix cracking, fiber debonding, and fiber pull-out due to slip. Here, this study introduces a mechanistic model for the behavior of unidirectionally reinforced SiC/SiC composites. Specifically a mean field homogenization approach is proposed to account for all deformation and degradation modes during mechanical deformation. The homogenization scheme relies on a Mori Tanaka method that is extended to consider the effects of the coating’s elasto-plastic response on the development of micromechanical fields. Further, the model proposed introduces a method to effectively account for the role of localized damage (i.e., cracks) on mechanical fields within both the fiber and the matrix. Upon validating the model against experimental data, the roles of interface sliding, coating dimensions and intrinsic elastic response, as well as of microstructure (e.g. porosity, fiber volume fraction) are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Pattern of global spin alignment of ϕ and K*0 mesons in heavy-ion collisions

The strong force, as one of the four fundamental forces at work in the universe, governs interactions of quarks and gluons, and binds together the atomic nucleus. Notwithstanding decades of progress since Yukawa first developed a description of the force between nucleons in terms of meson exchange 1 , a full understanding of the strong interaction remains a major challenge in modern science. One remaining difficulty arises from the non-perturbative nature of the strong force, which leads to the phenomenon of quark confinement at distance scales on the order of the size of the proton. Here we show that in relativistic heavy-ion collisions, where quarks and gluons are set free over an extended volume, two species of produced vector (spin-1) mesons, namely φ and K∗0 , emerge with a surprising pattern of global spin alignment. In particular, the global spin alignment for φ is unexpectedly large, while that for K∗0 is consistent with zero. The observed spin-alignment pattern and magnitude for the φ cannot be explained by conventional mechanisms, while a model with strong force fields2, 3 accommodates the current data. This is the first time that the strong force field is experimentally supported as a key mechanism that leads to global spin alignment. We extract a quantity proportional to the intensity of the field of the strong force. Within the framework of the Standard Model, where the strong force is typically described in the quark and gluon language of Quantum Chromodynamics, the field being considered here is an effective proxy description. This is a qualitatively new class of measurement, which opens a new avenue for studying the behaviour of strong force fields via their imprint on spin alignment.

Abdallah, M. S.↗
DOE OSTI2023

Photocatalytic water splitting

With the goal of achieving large-scale H 2 production from renewable resources, water splitting into H 2 and O 2 using semiconductor photocatalysts (sometimes called artificial photosynthesis) has been studied for five decades. Unfortunately, the lack of rigour and reproducibility in the data collection and analysis of experimental results has hindered progress in the field. This Primer provides a comprehensive overview of proper characterization and evaluation of photocatalysts for overall water splitting. In particular, the Primer covers various pitfalls in photocatalysis research, best practices for reproducibility and reliable methods for conducting rigorous experiments. As a result, the recommendations are intended to reduce false positives in the literature and to promote progress towards a practical technology for producing H 2 from water by using sunlight.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗