Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “equations of fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Utilization of Existing Pipelines in Hydrogen Transport: Literature Review Report

This report critically reviews the flow behavior of hydrogen-natural gas (H 2 -NG) mixtures in pipelines and examines the critical factors of hydrogen integration into existing natural gas infrastructure. It addresses the choking behavior characterized by velocity increase and pressure drop, as well as the effects of flow restrictions and pressure losses during hydrogen transport. Computational and analytical models are used to investigate these effects, and their effects on thermodynamic properties and system performance are evaluated. The study also reviews the energy efficiency and flow dynamics of hydrogen and methane-hydrogen mixtures and optimizes the hydrogen flow rate. In addition, the effects of these mixtures on the flow characteristics are discussed in detail, with special emphasis on the compressibility factor (z factor) and fluid properties based on equations of state for hydrogen-natural gas mixtures. The study also analyzes the mixture ratios and highlights the thermophysical properties, flow dynamics, and hydrogen-blended natural gas application potential. These investigations assess flow stability, material interactions, and operational feasibility of transporting hydrogen mixtures through natural gas pipelines, which contribute to developing sustainable and efficient energy systems.

08 HYDROGEN↗
DOE OSTI2025

Potential quantum advantage for simulation of fluid dynamics

Numerical simulation of turbulent fluid dynamics needs to either parametrize turbulence—which introduces large uncertainties—or explicitly resolve the smallest scales—which is prohibitively expensive. Here, we provide evidence through analytic bounds and numerical studies that a potential quantum speedup can be achieved to simulate fluid dynamics using quantum computing. Specifically, we provide a lattice Boltzmann formulation of fluid dynamics for which we give evidence that low-order Carleman linearization is much more accurate than previously believed for these systems. This is achieved via a combination of reformulating the Navier-Stokes nonlinearity (u·$\triangledown$u) to lattice-Boltzmann nonlinearity (u 2 ) and accurately linearizing the dynamical equations, which effectively trades nonlinearity for additional degrees of freedom that add negligible expense in the quantum solver. Based on this, we apply a quantum algorithm for simulating the Carleman-linearized lattice Boltzmann equation and provide evidence that its cost scales logarithmically with system size compared with polynomial scaling in the best known classical algorithms. In this paper, we suggest that a quantum advantage may exist for simulating fluid dynamics, paving the way for simulating nonlinear multiscale transport phenomena in a wide range of disciplines using quantum computing.

42 ENGINEERING↗
DOE OSTI2021

Impact of Numerical Hydrodynamics in Turbulent Mixing Transition Simulations

Underresolved simulations are unavoidable in high Reynolds (Re) and Mach (Ma) number turbulent flow applications at scale. Implicit large-Eddy simulation (ILES) often becomes the effective strategy to capture the dominating effects of convectively driven flow instabilities. We evaluate the impact of three distinct numerical strategies in simulations of transition and turbulence decay with ILES: the Harten–Lax–van Leer (HLL) Riemann solver applying Strang splitting and a Lagrange-plus-Remap formalism to solve the directional sweep—denoted split; the Harten–Lax–Van Leer-Contact (HLLC) Riemann solver using a directionally unsplit strategy and parabolic reconstruction—denoted unsplit; and the HLLC Riemann solver using unsplit and a low-Ma correction (LMC)—denoted unsplit*. Three case studies are considered: (1) a shock tube problem prototyping shock-driven turbulent mixing, (2) the Taylor–Green Vortex (TGV) prototyping transition to turbulence, and, (3) an homogeneous isotropic turbulence (HIT) case, focusing on the impact of discretization on transition and decay from fixed well-characterized initial conditions. Significantly more accurate predictions are provided by the unsplit schemes, in particular, when augmented with the LMC. For given resolution, only the unsplit schemes predict the turbulent mixing transition after reshock observed in the shock tube experiments. Relevant comparisons of ILES based on Euler and Navier–Stokes equations addressing potential occurrence of low-Re regimes in the applications are presented. Unsplit schemes are instrumental in allowing to capture the spatial development of the TGV flow and its validation at prescribed Re with significantly less resolution. HIT analysis confirms higher simulated turbulence Re and increased small-scale content associated with the unsplit discretizations.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Spectral Element Applications in Complex Nuclear Reactor Geometries: Tet-to-Hex Meshing

The spectral element code Nek5000 is an open-source, higher-order computational fluid dynamics code developed at Argonne National Laboratory. It is designed to solve incompressible Navier-Stokes equations, but it also has a low-Mach-number approximation feature available. Large eddy simulation is approached by explicit filtering of the velocity field (and other fields) to mimic the effect of dissipation due to the unresolved scale. The computational domain is decomposed into second-order hexahedral elements that conform to the boundaries. However, generating a high-quality pure-hexahedral mesh can be challenging for some problems. For simple geometries, traditional blocking methods can be used to decompose the domain into smaller blocks to generate a so-called structural mesh. A structural mesh can maintain good orthogonality but can have a highly skewed mesh to conform to the geometry, as well as unnecessary refinement in the far field. Moreover, for geometries with relative complexity, blocking the geometry becomes impossible. To address these issues, we adopted a let-to-hex strategy to generate a pure hexahedral mesh for Nek5000. First, we generate a pure tetrahedral mesh for the geometry; then we divide one tetrahedral element into four hexahedral elements. A pure tetrahedral mesh could be easily generated for complex geometries by using many current meshing codes. In this paper, we use the commercial codes ANSYS meshing and ANSYSICEM to generate the pure tetrahedral mesh and then convert it to a pure hexahedral mesh. Boundary layers are extruded in ANSYSICEM to maintain near-wall resolution.

ANSYS ICEM↗
DOE OSTI2020

Blood flow imaging by optimal matching of computational fluid dynamics to 4D-flow data

Three-dimensional, time-resolved blood flow measurement (4D-flow) is a powerful research and clinical tool, but improved resolution and scan times are needed. Therefore, this study aims to (1) present a postprocessing framework for optimization-driven simulation-based flow imaging, called 4D-flow High-resolution Imaging with a priori Knowledge Incorporating the Navier-Stokes equations and the discontinuous Galerkin method (4D-flow HIKING), (2) investigate the framework in synthetic tests, (3) perform phantom validation using laser particle imaging velocimetry, and (4) demonstrate the use of the framework in vivo. An optimizing computational fluid dynamics solver including adjoint-based optimization was developed to fit computational fluid dynamics solutions to 4D-flow data. Synthetic tests were performed in 2D, and phantom validation was performed with pulsatile flow. Reference velocity data were acquired using particle imaging velocimetry, and 4D-flow data were acquired at 1.5 T. In vivo testing was performed on intracranial arteries in a healthy volunteer at 7 T, with 2D flow as the reference. Results Synthetic tests showed low error (0.4%-0.7%). Phantom validation showed improved agreement with laser particle imaging velocimetry compared with input 4D-flow in the horizontal (mean -0.05 vs -1.11 cm/s, P < .001; SD 1.86 vs 4.26 cm/s, P < .001) and vertical directions (mean 0.05 vs -0.04 cm/s, P = .29; SD 1.36 vs 3.95 cm/s, P < .001). In vivo data show a reduction in flow rate error from 14% to 3.5%. Phantom and in vivo results from 4D-flow HIKING show promise for future applications with higher resolution, shorter scan times, and accurate quantification of physiological parameters.

4D-flow MRI↗
DOE OSTI2025

Beyond Magic Barrels: Digital manufacturing for crystallization, process development and optimization of explosive materials: Part II Resveratrol Exemplar

This SAND report summarizes work supported by an Engineering Sciences Research Foundation (ESRF) Lab Directed Research and Development (LDRD) project entitled “Beyond Magic Barrels: Digital manufacturing for crystallization, process development and optimization of explosive materials.” This SAND report is written in two parts with Part 1 discusses recrystallization of our explosive exemplar and Part 2 summarizing our work with recrystallization of resveratrol. We have studied resveratrol recrystallization with a multiscale approach combining experiments, modeling and simulation. At the single crystal scale, microscopy experiments illuminate crystal time-dependent growth rates using advanced image analysis. Bench scale experiments were carried out to look at growth of multiple particles in a small reactor creating thousands of particles and analyzing the results with microscopy and μCT. For the modeling we combine kinetic Monte Carlo (kMC) models with subscale information from density functional theory (DFT) or molecular dynamics. This work is discussed in Part 1 and can also be found in a paper from the project discussing a coarse-grained kMC model specifically developed for resveratrol. For well-mixed systems, we have population balance equations (PBE) linked with species mass conservation forming a set of ordinary differential equations that can be solved quickly. For more complicated geometries, such as the vat crystallization used throughout the complex, a coupled computational fluid dynamic (CFD)/PBE method was developed to account for gradients in temperature and concentration and differences in crystallization rates throughout the domain. These simulations are more complex and require high performance computing. We present results for two cases: 5% seed fast cool with parameters fit to the well-mixed case and 5% seed slow cool using the same parameters. We show reasonable agreement with experiments though are particles are significantly larger than the experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Numerical study on aerosol sampling in a nuclear facility duct with a 90-degree elbow

Due to the challenging design requirements, elbows are often unavoidable in duct configuration, and these 90-degree bends introduce swirl, velocity variations, recirculation, and secondary flow. These disturbances make it difficult for nuclear facilities to meet particle sampling standards. A series of numerical analyses are conducted to track aerosols in a nuclear facility duct having a 90-degree elbow with the assistance of computational fluid dynamics (CFD). A turbulence model, a continuity, and a momentum, a discrete phase model, and species transport equations are solved simultaneously to track aerosols in the duct. The effect of turbulence models, turbulent dispersion models, droplet drag model, aerosol amount, aerosol spray configuration, guide vanes, and mixers are investigated. Simulation results are analyzed per relevant testing codes such as DOE-HDBK-1169, ASME AG1, ISO 14644-3, ACGIH, and ANSI/HPS N13.1.

Han, Kai [Savannah River Nuclear Solutions (SRNS),↗
DOE OSTI2022

Computational Methods to Characterize Panel Loading Conditions for Accelerated Testing

Panel cracking and degradation due to wind loading are known to have a detrimental effect on power output. Recreating these damaging conditions in a controlled experimental setting requires an understanding of the loads being generated at the panel surface as a function of both wind speed, wind direction, and panel orientation. To better understand these relationships, a computational fluid dynamics (CFD) simulation package was constructed using an open-source Python library for solving partial differential equations with the finite element method. This CFD package allows the simulated wind speed and panel orientation of a multi-panel array to be easily changed and provides the capability to measure the traction forces at discrete points along the sun-facing and ground-facing surface of an interior panel residing in the wake of one or more upstream panels. A parameter exploration was performed in which the panel angle was varied in even increments from -70 deg to 70 deg and the wind speed was varied from 2 to 30 m/s. During post processing, the measured traction along the panel surface was averaged spatially and interpreted as a time-varying signal, where further processing of this signal yielded the root mean square amplitude and a characteristic frequency associated with the loading. This study found that higher wind speeds are generally associated with increased amplitude of loading and that the panel orientation angle can significantly exacerbate or mitigate this loading. These outcomes are presented along with current work on higher-fidelity verification simulations and recommendations for performing accelerated experimental testing.

loading↗
DOE OSTI2023

EXPERIMENTAL AND COMPUTATIONAL STUDY OF DIRECT CONTACT MEMBRANE DISTILLATION

Experimental and computational studies of direct contact membrane distillation (DCMD) are conducted. The permeate flux is measured in a module containing a flat sheet membrane. Polytetrafluoroethylene (PTFE) hydrophobic membrane (Membrane Solutions, FPB045A16) with a nominal pore size of 0.45 μm, the thickness of 179~239 μm, the porosity of 80% is used in the experiments. The feed solution is a binary mixture of water and NaCl. The inlet feed temperature is fixed at 70°C, and the feed Reynolds number is varied between 500 and 2000. Two inlet feed concentrations, 0 and 35g/L, are considered. The permeate flow rate was kept constant at Re of 1300 and temperature of 20°C. Three-dimensional steady-state computational fluid dynamics (CFD) simulations are performed using the laminar model. The Navier’s Stokes, energy, and mass transport equations in each channel coupled with flux boundary conditions imposed at the membrane surface are solved. The predicted module-averaged flux is compared to measured data for all operating conditions. Measured and predicted flux agrees well; validating both experiments and model, Temperature polarization in the feed and permeate channel and concentration polarization in the feed channel are characterized by validated CFD simulations.

Oztekin, Alparslan↗
DOE OSTI2025

Acausality-driven instabilities in relativistic viscous hydrodynamics

We investigate non-linear instabilities stemming from superluminal propagation of information in Israel-Stewart-like models of relativistic viscous fluid dynamics. In relativity, the characteristic speed of propagation of information, $w$, and the speed of the fluid, $v$, allow us to differentiate between regimes of the hydrodynamic equations that are acausal but stable ($w>1$), unstable ($v^{2} w^{2} \geq 1$), and covariantly ill-posed ($w^{2} \leq 0$). As an analytical benchmark, we present a new solution that illustrates these distinct regimes. We compare this analytical solution to the result of a numerical relativistic viscous fluid dynamics solver, and confirm that the analytical result can be recovered numerically in the stable regime, whether causal or acausal. The onset of numerical instabilities is further found to occur in the regime predicted by the analytical solution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Exact Coherent Structures and Phase Space Geometry of Preturbulent 2D Active Nematic Channel Flow

Confined active nematics exhibit rich dynamical behavior, including spontaneous flows, periodic defect dynamics, and chaotic “active turbulence.” Here, we study these phenomena using the framework of exact coherent structures, which has been successful in characterizing the routes to high Reynolds number turbulence of passive fluids. Exact coherent structures are stationary, periodic, quasiperiodic, or traveling wave solutions of the hydrodynamic equations that, together with their invariant manifolds, serve as an organizing template of the dynamics. We compute the dominant exact coherent structures and connecting orbits in a preturbulent active nematic channel flow, which enables a fully nonlinear but highly reduced-order description in terms of a directed graph. Using this reduced representation, we compute instantaneous perturbations that switch the system between disparate spatiotemporal states occupying distant regions of the infinite-dimensional phase space. Overall, our results lay the groundwork for a systematic means of understanding and controlling active nematic flows in the moderate- to high-activity regime.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Population balance modeling of polyurethane foam formation with pressure‐dependent growth kernel

Abstract Polyurethane foams are widely used materials often chosen for their useful characteristics such as low thermal conductivity, ease of application, and high strength‐to‐weight ratios. Computational models are needed to predict the dynamics of the flow and expansion, and the resulting material properties, to improve manufacturing processes. In this paper, a model for PMDI, a water‐blown polyurethane foam, is presented. By extending a kinetics‐based approach by adding bubble‐scale information via a population balance equation (PBE) using the quadrature method of moments, we can track bubble size distributions during foaming. We present results from a three‐dimensional computational fluid dynamics model using arbitrary Lagrangian–Eulerian interface tracking implemented in finite element software. The model compares favorably with experimental data, including dynamics, bubble distributions measured by both camera and diffusion wave spectroscopy, and post‐test bubble size from scanning electron microscopy and density measurements from x‐ray computed tomography.

Ortiz, Weston↗
DOE OSTI2025

A parallel-kinetic-perpendicular-moment model for magnetised plasmas

We describe a new model for the study of weakly collisional, magnetised plasmas derived from exploiting the separation of the dynamics parallel and perpendicular to the magnetic field. This unique system of equations retains the particle dynamics parallel to the magnetic field while approximating the perpendicular dynamics through a spectral expansion in the perpendicular degrees of freedom, analogous to moment-based fluid approaches. In so doing, a hybrid approach is obtained that is computationally efficient enough to allow for larger-scale modelling of plasma systems while eliminating a source of difficulty in deriving fluid equations applicable to magnetised plasmas. We connect this system of equations to historical asymptotic models and discuss advantages and disadvantages of this approach, including the extension of this parallel-kinetic-perpendicular moment beyond the typical region of validity of these more traditional asymptotic models. This paper forms the first of a multi-part series on this new model, covering the theory and derivation, alongside demonstration benchmarks of this approach that include shocks and magnetic reconnection.

astrophysical plasmas↗
DOE OSTI2025

An infrasound source analysis of the OSIRIS-REx sample return capsule hypersonic re-entry

The OSIRIS-REx sample return capsule's hypersonic re-entry into the atmosphere is a rare opportunity to test a variety of sonic boom source models since the projectile dimensions are well characterized. While the as-flown flight path is unknown, the predicted flight path enables a rough approximation of the source Mach number and location. Six infrasound microphones deployed in the boom carpet along the predicted flight path recorded impulsive signals from the OSIRIS-REx re-entry. Using a suite of atmosphere profiles and the geometric acoustics approximation, we estimate locations with uncertainty estimates along the flight path from which the signals were emitted. Acoustic overpressure and signal duration predictions from Whitham's far field theory, Carlson's simplified sonic boom prediction method, and a drag-dominated hypersonic model are analyzed with uncertainty estimates from the location estimate. While the Carlson simplified sonic boom prediction method could be accurate, our preference is for the drag-dominated source model. Using this source model with an inviscid Burgers's equation solver for propagation, we obtained an excellent match to the recorded data. In conclusion, these results will help better inform future sample return capsule re-entry observation campaigns as well as contribute to a better understanding of high altitude infrasonic sources.

58 GEOSCIENCES↗
DOE OSTI2021

Lagrangian particle model for 3D simulation of pellets and SPI fragments in tokamaks

A 3D numerical model for the ablation of pellets and shattered pellet injection (SPI) fragments in tokamaks in the plasma disruption mitigation and fueling parameter space has been developed based on the Lagrangian particle code [R. Samulyak, X. Wang, H.-S. Chen, Lagrangian Particle Method for Compressible Fluid Dynamics, J. Comput. Phys., 362 (2018), 1-19]. The pellet code implements the low magnetic Reynolds number MHD equations, kinetic models for the electronic heating, a pellet surface ablation model, an equation of state that supports multiple ionization states, radiation, and a model for grad-B drift of the ablated material across the magnetic field. The Lagrangian particle algorithm is highly adaptive, capable of simulating a large number of fragments in 3D while eliminating numerical difficulties of dealing with the tokamak background plasma. The code has achieved good agreement with theory for spherically symmetric ablation flows. Axisymmetric simulations of neon and deuterium pellets in magnetic fields ranging from 1 to 6 Tesla have been compared with previous simulations using the FronTier code, and very good agreement has also been obtained. Furthermore, the main physics contribution of the paper is a detailed study of the influence of 3D effects, in particular grad-B drift, on pellet ablation rates and properties of ablation clouds. Smaller reductions of ablation rates in magnetic fields compared to axially symmetric simulations have been demonstrated because the ablated material is not confined to narrowing channels in the presence of grad-B drift. Contribution of various factors in the grad-B drift model has also been quantified.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Probabilistic neural networks for fluid flow surrogate modeling and data recovery

We consider the use of probabilistic neural networks for fluid flow surrogate modeling and data recovery. This framework is constructed by assuming that the target variables are sampled from a Gaussian distribution conditioned on the inputs. Consequently, the overall formulation sets up a procedure to predict the hyperparameters of this distribution which are then used to compute an objective function given training data. We demonstrate that this framework has the ability to provide for prediction confidence intervals based on the assumption of a probabilistic posterior, given an appropriate model architecture and adequate training data. The applicability of the present framework to cases with noisy measurements and limited observations is also assessed. To demonstrate the capabilities of this framework, we consider canonical regression problems of fluid dynamics from the viewpoint of reduced-order modeling and spatial data recovery for four canonical data sets. The examples considered in this study arise from (i) the shallow-water equations, (ii) a two-dimensional cylinder flow, (iii) the wake of a NACA0012 airfoil with a Gurney flap, and (iv) the NOAA sea surface temperature data set. Furthermore, the present results indicate that the probabilistic neural network not only produces a machine-learning-based fluid flow surrogate model but also systematically quantifies the uncertainty therein to assist with model interpretability.

42 ENGINEERING↗
DOE OSTI2020

Data-driven selection of stiff chemistry ODE solver in operator-splitting schemes

Most computational fluid dynamics simulations of practical combustion applications employ operator-splitting schemes, where chemistry and transport are separated and integrated with distinct numerical methods. The changes in composition due to chemistry are evaluated by solving ordinary differential equations (ODE) in each cell of the computational domain, which typically dominates the computational cost when detailed chemistry is considered. In this work, a data-driven approach for the selection of chemistry ODE solvers in operator-splitting schemes is presented. Neural networks are used to predict the ODE solvers CPU times and errors for a given thermochemical state. This allows the selection of an optimal ODE solver on a cell-by-cell, timestep-by-timestep basis. The models are trained using a wide set of thermochemical states generated through partially-stirred reactors and flames simulations. The methodology is validated by quantifying the prediction errors, the classification accuracy, and the computational speedup. The model predicts the optimal ODE solver for 70 to 95% of the validation cases and decreases the computional cost by a factor of 3 or more. The generalizability of the methodology to different chemical mechanisms and different fuels is assessed and it is shown that the model’s performance is only slightly degraded and its applicability is significantly enhanced if the inputs to the neural networks are restricted to a small set of thermochemical state variables present in most chemical mechanisms. In conclusion, the models are used in an homogeneous reactor case and a multi-dimensional CFD simulation of a diesel spray at high pressure where a speedup of more than 3 is achieved.

42 ENGINEERING↗
DOE OSTI2022

Quantum simulations of hydrodynamics via the Madelung transformation

Developing numerical methods to simulate efficiently nonlinear fluid dynamics on universal quantum computers is a challenging problem. In this paper, a generalization of the Madelung transform is defined to solve quantum relativistic charged fluid equations interacting with external electromagnetic forces via the Dirac equation. The Dirac equation is discretized into discrete-time quantum walks which can be efficiently implemented on universal quantum computers. A variant of this algorithm is proposed to implement simulations using current noisy intermediate scale quantum (NISQ) devices in the case of homogeneous external forces. High resolution (up to N=2 17 grid points) numerical simulations of relativistic and nonrelativistic hydrodynamical shocks on current IBM NISQs are performed with this algorithm. Here, this paper demonstrates that fluid dynamics can be simulated on NISQs, and opens the door to simulating other fluids, including plasmas, with more general quantum walks and quantum automata.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗