Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “engineered form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A new soil mixing layer model for simulating conservative solute loss from initially saturated soil to surface runoff

Surface water pollution due to solute loss from soil to surface runoff is a serious threat to the environment, and it is of great significance to predict the solute loss. While soil mixing layer theory has been widely used to predict the solute loss, it has been observed that the conventional soil mixing layer models with constant mixing layer depth underestimate solute concentration in surface runoff, and thus underestimate the solute loss after surface runoff starts. This study introduced a new soil mixing layer model with a new concept that the mixing layer depth increases downward with time after surface runoff occurs. This new concept was implemented by adding a mixing front between the soil mixing layer and its underlying soil layer, which is conceptually similar to the wetting front of soil infiltration given by the Green-Ampt equation. This is equivalent to treating the soil mixing layer as a deforming control volume. A mechanistic explanation for the new model was presented. This study also developed a closed form solution of the new model. The new model was evaluated by simulating five laboratory experiments conducted by two groups of researchers. The first two experiments have ponding water, and consider different drainage and runoff conditions at both early and late runoff times. The other three experiments do not have ponding water, and consider different infiltration conditions at the bottom of soil boxes. Simulation results of the five experiments show that the new model resolves the underestimation problem of conventional soil mixing layer models. The new model is subject to a total of six limits such as that the new model only considers conservative solute. Three limits are related to the assumptions used to derive the closed form solution, and they may be alleviated in a future research as briefly discussed at the end of the paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Intercalation-Engineered Out-of-Plane Polarized van der Waals Ferromagnetic Superlattice with Room-Temperature Néel-Type Skyrmions

Superlattices (SLs) based on two-dimensional (2D) van der Waals (vdW) materials, abbreviated as 2D-SLs, have garnered significant attention due to their customizable properties. 2D-SLs can be engineered by mechanical stacking or chemical intercalation to achieve diverse forms of symmetry breaking, resulting in exotic phenomena like the quantum anomalous Hall effect and topological magnetism. Hitherto, broken symmetries in 2D-SLs have been widely produced within lateral planes or three dimensions. However, symmetry breaking along the vertical direction, specifically as an out-of-plane one-dimensional (1D) polarized superlattice, has not yet been achieved. Here, in this paper, we report a so far unseen out-of-plane 1D polarized vdW ferromagnetic superlattice achieved through an approach of two-step intercalation and de-embedding of chromium (Cr)-based 2D vdW magnets. The off-centering polarization of both intrinsic and intercalated Cr atoms in this (1 × 1 × 2) superstructure breaks the mirror symmetry vertically, yielding a Dzyaloshinskii–Moriya interaction (DMI). This results in high-density Néel-type magnetic skyrmions over a broad temperature range. Notably, sub-100 nm Néel-type skyrmions at room temperature (RT) can be achieved by tuning the Cr intercalation ratio, marking the first binary compound RT Néel-type skyrmionic vdW magnet. Our work expands the 2D-SL family with a class of out-of-plane 1D polarized ferromagnetic superlattice with tunable topological magnetism.

1D polarized superlattice↗
DOE OSTI2022

Gate-tunable Veselago interference in a bipolar graphene microcavity

The relativistic charge carriers in monolayer graphene can be manipulated in manners akin to conventional optics. Klein tunneling and Veselago lensing have been previously demonstrated in ballistic graphene pn-junction devices, but collimation and focusing efficiency remains relatively low, preventing realization of advanced quantum devices and controlled quantum interference. Here, we present a graphene microcavity defined by carefully-engineered local strain and electrostatic fields. Electrons are manipulated to form an interference path inside the cavity at zero magnetic field via consecutive Veselago refractions. The observation of unique Veselago interference peaks via transport measurement and their magnetic field dependence agrees with the theoretical expectation. We further utilize Veselago interference to demonstrate localization of uncollimated electrons and thus improvement in collimation efficiency. Our work sheds new light on relativistic single-particle physics and provide a new device concept toward next-generation quantum devices based on manipulation of ballistic electron trajectory.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Meso-scale modeling of UO2 nuclear fuel to high burnup

To improve the economics of light water reactors for commercial nuclear energy generation, utility operators are seeking to obtain regulatory approval to run UO2 fuel to higher levels of burnup. One potential impediment to obtaining this approval is the phenomenon of fuel fragmentation, relocation, and dispersal (FFRD). FFRD can result when fuel experiences a rapid temperature transient, such as that occurring during a Loss Of Coolant Accident (LOCA). FFRD has historically been most associated with the rim region in UO2 fuel pellets, where the phenomenon of fragmentation is also referred to as pulverization due to the small size of the fragments. More recent evidence suggests that the so-called “dark zone” (due to its appearance in micrographs) that can be observed in the mid-radial regions of high burnup fuel is also susceptible to FFRD. Although empirical fuel performance models have been developed that can adequately predict pulverization in the rim region under typical LWR conditions, a scientific understanding of what underlies fuel restructuring and subsequent FFRD is lacking even in the rim region, and no models are currently available for the behavior the dark zone. To address these challenges, the U.S. Department of Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has employed a multi-scale modeling approach to improve scientific understanding and develop new fuel performance models. In this talk, I will focus on meso-scale efforts, which form a crucial link between atomic-scale and engineering-scale models. Phase-field modeling combined with cluster dynamics is used to predict the restructuring process in the rim region. Phase-field fracture modeling, informed by atomistic simulations, is used to predict the onset of pulverization in the rim region. Combining these techniques together allows the extent of rim pulverization to be predicted. The formation and evolution of the dark zone has also been simulated with the phase-field method, using an improved approach to vacancy source term parameterization. The work shows the important impact of microstructure on fuel performance.

fracture↗
DOE OSTI2025

Model Form Error Correction for a Black-Box Thermal Battery Heat Transfer Simulation

Thermal batteries are crucial for supplying power to high-consequence engineering applications such as rockets. Computational simulations have been developed to predict thermal battery behavior, but these simulations often suffer from modeling errors, including model form uncertainty. Addressing this uncertainty can be achieved by quantifying either the model discrepancy in the output or the model form error (MFE) in the governing equation. MFE is particularly valuable as it can be better extrapolated beyond observed outputs, which is essential for predictions involving changes in external system loading, system configuration and geometry, or output quantities. This paper employs a state estimation approach to estimate MFE using experimental data and then utilizes machine learning (ML) to model its relationship with state variables. A nonintrusive technique is used to estimate MFE in a black-box thermal battery heat transfer simulation. The trained machine learning model for MFE is then applied to correct simulation predictions under extrapolated initial conditions and battery configurations. In conclusion, the methodology's performance is evaluated using additional experimental data, demonstrating its effectiveness in improving prediction accuracy.

Batteries↗
DOE OSTI2021

Penetrant competition and plasticization in membranes: How negatives can be positives in natural gas sweetening

Membranes are attractive for upgrading natural gas; however, the gas permeation processes through membranes are challenging to control. The coexistence of condensable H 2 S and CO 2 typically causes membrane performance to decline under practical feed conditions, due to uncontrolled penetrant competition and undesired plasticization of the membrane polymer matrix. In this paper, we report a strategy to successfully transform these apparent negatives, i.e. plasticization and penetrant competition, into positives that boost the natural gas sweetening efficiency of membranes greatly. Our strategy is to disperse engineered metal organic framework (MOF) fillers into designed polymer matrices to form hybrid membranes, which promote the permeation of both H 2 S and CO 2 but hinder CH 4 permeation. Moreover, uniformly dispersed MOF fillers also significantly alter the plasticization responses of polymer matrices, enabling controlled plasticization benefits. Ultimately, we illustrate a highly tunable MOF-polymer hybrid membrane platform that meets the diverse natural gas sweetening requirements under aggressive conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Scale-up Testing of Advanced Polaris Membrane in CO2 Capture Technology

This final technical report describes work conducted by Membrane Technology and Research, Inc. (MTR) for the U.S. Department of Energy (DOE), National Energy Technology Lab (NETL) on the scale-up and testing of advanced Polaris™ membrane CO2 capture technology at the Technology Centre Mongstad (TCM) under award number DE-FE0031591. The work was performed from August 1, 2018 through January 31, 2023. The overall goal of this project was to design, build and operate an advanced Polaris membrane CO2 capture system at TCM. MTR was assisted in this project by Trimeric Corporation (Trimeric), an engineering design services company, the Carbon Capture Simulation for Industry Impact (CCSI2), a partnership among national laboratories, industry, and academic institutions, and the Technology Centre Mongstad (TCM), who provided the host site for the slipstream field test. This report details the work conducted to scale-up MTR’s second-generation (Gen-2) Polaris membrane and advanced planar membrane modules to a final form factor optimized for commercial use; validate their performance in an engineering-scale field test at TCM; and to show the potential of the MTR process to meet DOE CO2 capture targets from large source point emitters. Work for this project included membrane optimization and scale-up, advanced planar module design and fabrication, design and fabrication of an engineering-scale field test membrane skid, operation of the field test skid processing Residue Fluid Catalytic Cracker (RFCC) industrial flue gas at TCM, and a detailed techno-economic analysis (TEA) of the MTR membrane post-combustion process for CO2 capture. This project validated recent membrane technology advancements at the engineering-scale, moves the MTR advanced post-combustion capture technology to TRL-6, and mitigates risk in future Large Pilot or Demonstration scale-up activities.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

New Developments and Verification of the Fusion Blanket Simulation Capabilities in the MOOSE Framework

This poster contains new developments and updates in the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework related to fusion modeling and simulation, and forms the basis for an on-going effort in modeling whole fusion devices at Idaho National Laboratory using MOOSE. In this work, a slice of the midplane of a proposed ceramic breeder blanket design for the Fusion Nuclear Science Facility is simulated using a combination of neutronics, 1D system level thermal hydraulics for helium, 3D heat conduction, and tritium transport. Previous work focused on the engineering scale full assembly of a blanket sector, but the simulations here form the basis for software quality and verification efforts to increase confidence as the large scale simulations continue. This poster was presented at the Idaho National Laboratory Intern Poster Session 2023.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Engineered disorder in CO 2 photocatalysis

Light harvesting, separation of charge carriers, and surface reactions are three fundamental steps that are essential for an efficient photocatalyst. Here we show that these steps in the TiO 2 can be boosted simultaneously by disorder engineering. A solid-state reduction reaction between sodium and TiO 2 forms a core-shell c-TiO 2 @a-TiO 2-x (OH) y heterostructure, comprised of HO-Ti-[O]-Ti surface frustrated Lewis pairs (SFLPs) embedded in an amorphous shell surrounding a crystalline core, which enables a new genre of chemical reactivity. Specifically, these SFLPs heterolytically dissociate dihydrogen at room temperature to form charge-balancing protonated hydroxyl groups and hydrides at unsaturated titanium surface sites, which display high reactivity towards CO 2 reduction. This crystalline-amorphous heterostructure also boosts light absorption, charge carrier separation and transfer to SFLPs, while prolonged carrier lifetimes and photothermal heat generation further enhance reactivity. The collective results of this study motivate a general approach for catalytically generating sustainable chemicals and fuels through engineered disorder in heterogeneous CO 2 photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Floquet Engineering of Interactions and Entanglement in Periodically Driven Rydberg Chains

Neutral atom arrays driven into Rydberg states constitute a promising approach for realizing programmable quantum systems. Enabled by strong interactions associated with Rydberg blockade, they allow for simulation of complex spin models and quantum dynamics. We introduce a new Floquet engineering technique for systems in the blockade regime that provides control over novel forms of interactions and entanglement dynamics in such systems. Our approach is based on time-dependent control of Rydberg laser detuning and leverages perturbations around periodic many-body trajectories as resources for operator spreading. These time-evolved operators are utilized as a basis for engineering interactions in the effective Hamiltonian describing the stroboscopic evolution. As an example, we show how our method can be used to engineer strong spin exchange, consistent with the blockade, in a one-dimensional chain, enabling the exploration of gapless Luttinger liquid phases. In addition, we demonstrate that combining gapless excitations with Rydberg blockade can lead to dynamic generation of large-scale multipartite entanglement. Experimental feasibility and possible generalizations are discussed.

Floquet systems↗
DOE OSTI2020

HePHAESTUS: Heat Pipe Heterogeneous Approximation of Energy and Navier-Stokes Equations, Transience, and Non-Uniform Surface Heating [Slides]

A heat pipe is a liquid/vapor filled metal pipe capable of transporting large amounts of heat through evaporation of a liquid at one end and condensation of vapor at the other end creating a closed fluid loop. Heat pipes are widely used in the cooling of electronics and in space applications. Heat pipes are typically composed of a pipe wall, a wick material, a working fluid, and a central vapor channel. Heat is transferred into the working fluid at the “evaporator” end, through an adiabatic section, and heat is removed at the opposite end at the “condenser.” If no wick is used, gravitational acceleration can circulate the fluid due to the buoyancy of the vapor in the central core and a falling film of liquid at the pipe wall forming a “thermosyphon."

42 ENGINEERING↗
DOE OSTI2023

Tunable doping of carbon nanotubes through engineered atomic layer deposition

A carbon nanotube field effect transistor (CNFET), that has a channel formed of carbon nanotubes (CNTs), includes a layered deposit of a nonstoichiometric doping oxide (NDO), such as HfOX, where the concentration of the NDO varies through the thickness of the layer(s). An n-type metal-oxide semiconductor (NMOS) CNFET made in this manner can achieve similar ON-current, OFF-current, and/or threshold voltage magnitudes to a corresponding p-type metal-oxide semiconductor (PMOS) CNFET. Such an NMOS and PMOS can be used to achieve a symmetric complementary metal-oxide semiconductor (CMOS) CNFET design.

Source record↗
DOE OSTI2026

Towards dislocation-driven quantum interconnects

A central problem in the deployment of quantum technologies is the realization of robust architectures for quantum interconnects. We propose to engineer interconnects in semiconductors and insulators by patterning spin qubits at dislocations, thus forming quasi one-dimensional lines of entangled point defects. To gain insight into the feasibility and control of dislocation-driven interconnects, we investigate the optical cycle and coherence properties of nitrogen-vacancy (NV) centers in diamond, in proximity of dislocations, using a combination of advanced first-principles calculations. We show that one can engineer spin defects with properties similar to those of their bulk counterparts, including charge stability and a favorable optical cycle, and that NV centers close to dislocations have much improved coherence properties. Finally, we predict optically detected magnetic resonance spectra that may facilitate the experimental identification of specific defect configurations. Our results provide a theoretical foundation for the engineering of one-dimensional arrays of spin defects in the solid state.

Materials science↗
DOE OSTI2022

Crankcase ventilation system with dead space alignment sleeves

A cylinder aligning sleeve and adapter plate for use within an internal combustion engine. The sleeve includes apertures placed contiguously with holes within the adapter plate to form a flow passage through the dead space between compression and crosshead pistons. The flow passage exits to a vent line where gas detection may occur along with safe venting of any gas detected. The sleeve serves to ensure concentric alignment of the compression cylinder with the engine block bore.

Alvarado, Caleb A.↗
DOE OSTI2022

Editorial: Nanotechnology for natural products

Humans around the globe have lived through an unprecedented time. The emergence and rapid spread of coronavirus disease 2019 (COVID-19) have resulted in the loss of millions of lives, and this number is still climbing every day and hour. As a consequence, there have been drastic changes over the past two years in how we live, communicate, and work, some of which may have changed forever: remote conferencing has become a new norm for businesses, schools, and academia; work-from-home and hybrid working is now more than just acceptable in many industries; most importantly, COVID-19 has raised global awareness of infectious diseases and pandemic responses to an exceptional level. Certainly, COVID-19 is not the only disease that is causing human suffering at this moment. Other highly contagious and lethal viruses, such as the human immunodeficiency virus (HIV), Ebola, and the recent addition to the list, Monkeypox, pose extraordinary challenges to modern civilizations. On the other hand, non-communicable diseases, such as heart disease, stroke, and cancer, are still claiming the majority of deaths on a global level (World Health Organization, 2020). Before the availability of synthetic drugs, civilizations worldwide relied on natural products extracted from the environment and various organisms for healthcare. Natural products and their derivatives continue to be critical components in the drug library available today. Indeed, almost a quarter of the new drugs approved by the US Food and Drug Administration (FDA) since 1981 are natural products, botanical mixtures, or their derivatives (Newman and Cragg, 2020). Recent developments in analytical characterization, genome mining, and engineering have further increased interest in drug discovery from the pool of natural products (Atanasov et al., 2021). This Research Topic celebrates a collection of studies at the intersection of natural product research and nanotechnological advances. As a successor and extension of the Research Topic in “Nanotechnology in Traditional Medicines and Natural Products” published last year (Zhang et al., 2021), the present collection focused more on recent developments in employing the synthesis and characterization of nanostructures for the delivery of functional natural products. Specifically, the use of carrier nanostructures to conjugate or encapsulate therapeutically active natural products with carrier nanostructures could enable their robust, targeted delivery tailored to either tackle a specific disease or unlock a drug administration pathway. Over the last decade, nanostructures such as liposomes (Pattni et al., 2015) and lipid nanoparticles (Hou et al., 2021) have been developed as versatile platforms for the inclusion and delivery of a wide range of therapeutical compounds; a significant advance in this aspect is the stabilization of mRNA strands for COVID-19 vaccination recently produced by Pfizer/BioNTech and Moderna (Tenchov et al., 2021). Such engineered nanomaterials are now widely used in the development of new drugs, while regulatory forces, such as the US FDA, remain cautious with the evaluation of each product on a case-by-case basis (Wang and Grainger, 2022). In this collection, Zeng et al. provided a timely review of natural products conjugated to and contained within nanomaterials for the ongoing COVID-19 pandemic. Natural products that are potentially useful in the mitigation of this disease, such as chloroquine and curcumin, supported in nanocarrier systems, have been discussed in detail. More broadly, Cheng et al. comprehensively reviewed the use of liposomes as a nanocarrier for natural products. This article provides a summary of natural product compounds and extracts used to form liposomal structures. Readers can further enjoy the practical aspects of these engineered drugs for the treatment of specific diseases as well as insights into future directions in this field.

peptides↗
DOE OSTI2025

Robust supermoiré pattern in large-angle single-twist bilayers

Forming long-wavelength moiré superlattices in van der Waals bilayers that have a small-angle twist between the two layers has been a key approach for creating moiré flat bands. However, for small twist angles, strong lattice reconstruction creates domain walls and other forms of disorder in the moiré pattern, posing considerable challenges for engineering such platforms. At large twist angles, the lattices are more rigid, but it is difficult to produce flat bands in shorter-wavelength moiré superlattices. Here, in this study, we introduce an approach for tailoring robust supermoiré structures in bilayers of transition-metal dichalcogenides using only a single twist near a commensurate angle. Structurally, we show the spontaneous formation of a periodic arrangement of three inequivalent commensurate moiré stackings, where the angle deviation from the commensurate angle determines the periodicity. Electronically, we reveal a large set of van Hove singularities that indicate strong band hybridization, leading to flat bands near the valence band maximum. Our study extends the study of the interplay among band topology, quantum geometry and moiré superconductivity to the large twist angle regime.

electronic properties and materials↗
DOE OSTI2025

A fluorescent-protein spin qubit

Quantum bits (qubits) are two-level quantum systems that support initialization, readout and coherent control1. Optically addressable spin qubits form the foundation of an emerging generation of nanoscale sensors. The engineering of these qubits has mainly focused on solid-state systems. However, fluorescent proteins, rather than exogenous fluorescent probes, have become the gold standard for in vivo microscopy because of their genetic encodability. Although fluorescent proteins possess a metastable triplet state, they have not been investigated as qubits. Here we realize an optically addressable spin qubit in enhanced yellow fluorescent protein. A near-infrared laser pulse enables triggered readout of the triplet state with up to 20% spin contrast. Using coherent microwave control of the enhanced-yellow-fluorescent-protein spin at liquid-nitrogen temperatures, we measure a (16 ± 2) μs coherence time under Carr–Purcell–Meiboom–Gill decoupling. We express the qubit in mammalian cells, maintaining contrast and coherent control despite the complex intracellular environment. Finally, we demonstrate optically detected magnetic resonance in bacterial cells at room temperature with contrast up to 8%. Our results introduce fluorescent proteins as a powerful qubit platform that paves the way for applications in the life sciences, such as nanoscale field sensing and spin-based imaging modalities.

Feder, Jacob S. [Univ. of Chicago, IL (United Stat↗
DOE OSTI2021

Mutagenesis of Human Cytomegalovirus Glycoprotein L Disproportionately Disrupts gH/gL/gO over gH/gL/pUL128-131

Herein, cell-free and cell-to-cell spread of herpesviruses involves a core fusion apparatus comprised of the fusion protein glycoprotein B (gB) and the regulatory factor gH/gL. The human cytomegalovirus (HCMV) gH/gL/gO and gH/gL/pUL128-131 facilitate spread in different cell types. The gO and pUL128-131 components bind distinct receptors, but how the gH/gL portions of the complexes functionally compare is not understood. We previously characterized a panel of gL mutants by transient expression and showed that many were impaired for gH/gL-gB-dependent cell-cell fusion but were still able to form gH/gL/pUL128-131 and induce receptor interference. Here, the gL mutants were engineered into the HCMV BAC clones TB40/e-BAC4 (TB), TR, and Merlin (ME), which differ in their utilization of the two complexes for entry and spread. Several of the gL mutations disproportionately impacted gH/gL/gO-dependent entry and spread over gH/gL/pUL128-131 processes. The effects of some mutants could be explained by impaired gH/gL/gO assembly, but other mutants impacted gH/gL/gO function. Soluble gH/gL/gO containing the L201 mutant failed to block HCMV infection despite unimpaired binding to PDGFRα, indicating the existence of other important gH/gL/gO receptors. Another mutant (L139) enhanced the gH/gL/gO-dependent cell-free spread of TR, suggesting a “hyperactive” gH/gL/gO. Recently published crystallography and cryo-electron microscopy studies suggest structural conservation of the gH/gL underlying gH/gL/gO and gH/gL/pUL128-131. However, our data suggest important differences in the gH/gL of the two complexes and support a model in which gH/gL/gO can provide an activation signal for gB.

59 BASIC BIOLOGICAL SCIENCES↗